diff options
author | Karsten Keil <keil@b1-systems.de> | 2009-05-22 11:04:53 (GMT) |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2009-05-25 07:55:30 (GMT) |
commit | db9bb63a1b5b65df41d112a8c21adbbfc6a4ac08 (patch) | |
tree | 1a817cf2b57f557346d3f436aa12e0d10a918d42 /drivers/isdn/hardware | |
parent | 5df3b8bcc7826b85a2d233dd20da3ed247e1dc1d (diff) | |
download | linux-fsl-qoriq-db9bb63a1b5b65df41d112a8c21adbbfc6a4ac08.tar.xz |
mISDN: Add XHFC support for embedded Speech-Design board to hfcmulti
New version without emulating arch specific stuff for the other
architectures, the special IO and init functions for the 8xx
microcontroller are in a separate include file.
Signed-off-by: Andreas Eversberg <andreas@eversberg.eu>
Signed-off-by: Karsten Keil <keil@b1-systems.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/isdn/hardware')
-rw-r--r-- | drivers/isdn/hardware/mISDN/Kconfig | 11 | ||||
-rw-r--r-- | drivers/isdn/hardware/mISDN/hfc_multi.h | 45 | ||||
-rw-r--r-- | drivers/isdn/hardware/mISDN/hfc_multi_8xx.h | 167 | ||||
-rw-r--r-- | drivers/isdn/hardware/mISDN/hfcmulti.c | 416 |
4 files changed, 495 insertions, 144 deletions
diff --git a/drivers/isdn/hardware/mISDN/Kconfig b/drivers/isdn/hardware/mISDN/Kconfig index fd112ae..3024566 100644 --- a/drivers/isdn/hardware/mISDN/Kconfig +++ b/drivers/isdn/hardware/mISDN/Kconfig @@ -13,7 +13,7 @@ config MISDN_HFCPCI config MISDN_HFCMULTI tristate "Support for HFC multiport cards (HFC-4S/8S/E1)" - depends on PCI + depends on PCI || 8xx depends on MISDN help Enable support for cards with Cologne Chip AG's HFC multiport @@ -23,6 +23,15 @@ config MISDN_HFCMULTI * HFC-8S (8 S/T interfaces on one chip) * HFC-E1 (E1 interface for 2Mbit ISDN) +config MISDN_HFCMULTI_8xx + boolean "Support for XHFC embedded board in HFC multiport driver" + depends on MISDN + depends on MISDN_HFCMULTI + depends on 8xx + default 8xx + help + Enable support for the XHFC embedded solution from Speech Design. + config MISDN_HFCUSB tristate "Support for HFC-S USB based TAs" depends on USB diff --git a/drivers/isdn/hardware/mISDN/hfc_multi.h b/drivers/isdn/hardware/mISDN/hfc_multi.h index c4878cc..0c77386 100644 --- a/drivers/isdn/hardware/mISDN/hfc_multi.h +++ b/drivers/isdn/hardware/mISDN/hfc_multi.h @@ -17,6 +17,16 @@ #define PCI_ENA_REGIO 0x01 #define PCI_ENA_MEMIO 0x02 +#define XHFC_IRQ 4 /* SIU_IRQ2 */ +#define XHFC_MEMBASE 0xFE000000 +#define XHFC_MEMSIZE 0x00001000 +#define XHFC_OFFSET 0x00001000 +#define PA_XHFC_A0 0x0020 /* PA10 */ +#define PB_XHFC_IRQ1 0x00000100 /* PB23 */ +#define PB_XHFC_IRQ2 0x00000200 /* PB22 */ +#define PB_XHFC_IRQ3 0x00000400 /* PB21 */ +#define PB_XHFC_IRQ4 0x00000800 /* PB20 */ + /* * NOTE: some registers are assigned multiple times due to different modes * also registers are assigned differen for HFC-4s/8s and HFC-E1 @@ -81,6 +91,11 @@ struct hfcm_hw { #define HFC_CFG_CRC4 10 /* disable CRC-4 Multiframe mode, */ /* use double frame instead. */ +#define HFC_TYPE_E1 1 /* controller is HFC-E1 */ +#define HFC_TYPE_4S 4 /* controller is HFC-4S */ +#define HFC_TYPE_8S 8 /* controller is HFC-8S */ +#define HFC_TYPE_XHFC 5 /* controller is XHFC */ + #define HFC_CHIP_EXRAM_128 0 /* external ram 128k */ #define HFC_CHIP_EXRAM_512 1 /* external ram 256k */ #define HFC_CHIP_REVISION0 2 /* old fifo handling */ @@ -88,19 +103,22 @@ struct hfcm_hw { #define HFC_CHIP_PCM_MASTER 4 /* PCM is master */ #define HFC_CHIP_RX_SYNC 5 /* disable pll sync for pcm */ #define HFC_CHIP_DTMF 6 /* DTMF decoding is enabled */ -#define HFC_CHIP_ULAW 7 /* ULAW mode */ -#define HFC_CHIP_CLOCK2 8 /* double clock mode */ -#define HFC_CHIP_E1CLOCK_GET 9 /* always get clock from E1 interface */ -#define HFC_CHIP_E1CLOCK_PUT 10 /* always put clock from E1 interface */ -#define HFC_CHIP_WATCHDOG 11 /* whether we should send signals */ +#define HFC_CHIP_CONF 7 /* conference handling is enabled */ +#define HFC_CHIP_ULAW 8 /* ULAW mode */ +#define HFC_CHIP_CLOCK2 9 /* double clock mode */ +#define HFC_CHIP_E1CLOCK_GET 10 /* always get clock from E1 interface */ +#define HFC_CHIP_E1CLOCK_PUT 11 /* always put clock from E1 interface */ +#define HFC_CHIP_WATCHDOG 12 /* whether we should send signals */ /* to the watchdog */ -#define HFC_CHIP_B410P 12 /* whether we have a b410p with echocan in */ +#define HFC_CHIP_B410P 13 /* whether we have a b410p with echocan in */ /* hw */ -#define HFC_CHIP_PLXSD 13 /* whether we have a Speech-Design PLX */ +#define HFC_CHIP_PLXSD 14 /* whether we have a Speech-Design PLX */ +#define HFC_CHIP_EMBSD 15 /* whether we have a SD Embedded board */ #define HFC_IO_MODE_PCIMEM 0x00 /* normal memory mapped IO */ #define HFC_IO_MODE_REGIO 0x01 /* PCI io access */ #define HFC_IO_MODE_PLXSD 0x02 /* access HFC via PLX9030 */ +#define HFC_IO_MODE_EMBSD 0x03 /* direct access */ /* table entry in the PCI devices list */ struct hm_map { @@ -113,6 +131,7 @@ struct hm_map { int opticalsupport; int dip_type; int io_mode; + int irq; }; struct hfc_multi { @@ -120,7 +139,7 @@ struct hfc_multi { struct hm_map *mtyp; int id; int pcm; /* id of pcm bus */ - int type; + int ctype; /* controller type */ int ports; u_int irq; /* irq used by card */ @@ -160,10 +179,16 @@ struct hfc_multi { int len); void (*write_fifo)(struct hfc_multi *hc, u_char *data, int len); - u_long pci_origmembase, plx_origmembase, dsp_origmembase; + u_long pci_origmembase, plx_origmembase; void __iomem *pci_membase; /* PCI memory */ void __iomem *plx_membase; /* PLX memory */ - u_char *dsp_membase; /* DSP on PLX */ + u_long xhfc_origmembase; + u_char *xhfc_membase; + u_long *xhfc_memaddr, *xhfc_memdata; +#ifdef CONFIG_MISDN_HFCMULTI_8xx + struct immap *immap; +#endif + u_long pb_irqmsk; /* Portbit mask to check the IRQ line */ u_long pci_iobase; /* PCI IO */ struct hfcm_hw hw; /* remember data of write-only-registers */ diff --git a/drivers/isdn/hardware/mISDN/hfc_multi_8xx.h b/drivers/isdn/hardware/mISDN/hfc_multi_8xx.h new file mode 100644 index 0000000..45ddced --- /dev/null +++ b/drivers/isdn/hardware/mISDN/hfc_multi_8xx.h @@ -0,0 +1,167 @@ +/* + * For License see notice in hfc_multi.c + * + * special IO and init functions for the embedded XHFC board + * from Speech Design + * + */ + +#include <asm/8xx_immap.h> + +/* Change this to the value used by your board */ +#ifndef IMAP_ADDR +#define IMAP_ADDR 0xFFF00000 +#endif + +static void +#ifdef HFC_REGISTER_DEBUG +HFC_outb_embsd(struct hfc_multi *hc, u_char reg, u_char val, + const char *function, int line) +#else +HFC_outb_embsd(struct hfc_multi *hc, u_char reg, u_char val) +#endif +{ + hc->immap->im_ioport.iop_padat |= PA_XHFC_A0; + writeb(reg, hc->xhfc_memaddr); + hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0); + writeb(val, hc->xhfc_memdata); +} +static u_char +#ifdef HFC_REGISTER_DEBUG +HFC_inb_embsd(struct hfc_multi *hc, u_char reg, const char *function, int line) +#else +HFC_inb_embsd(struct hfc_multi *hc, u_char reg) +#endif +{ + hc->immap->im_ioport.iop_padat |= PA_XHFC_A0; + writeb(reg, hc->xhfc_memaddr); + hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0); + return readb(hc->xhfc_memdata); +} +static u_short +#ifdef HFC_REGISTER_DEBUG +HFC_inw_embsd(struct hfc_multi *hc, u_char reg, const char *function, int line) +#else +HFC_inw_embsd(struct hfc_multi *hc, u_char reg) +#endif +{ + hc->immap->im_ioport.iop_padat |= PA_XHFC_A0; + writeb(reg, hc->xhfc_memaddr); + hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0); + return readb(hc->xhfc_memdata); +} +static void +#ifdef HFC_REGISTER_DEBUG +HFC_wait_embsd(struct hfc_multi *hc, const char *function, int line) +#else +HFC_wait_embsd(struct hfc_multi *hc) +#endif +{ + hc->immap->im_ioport.iop_padat |= PA_XHFC_A0; + writeb(R_STATUS, hc->xhfc_memaddr); + hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0); + while (readb(hc->xhfc_memdata) & V_BUSY) + cpu_relax(); +} + +/* write fifo data (EMBSD) */ +void +write_fifo_embsd(struct hfc_multi *hc, u_char *data, int len) +{ + hc->immap->im_ioport.iop_padat |= PA_XHFC_A0; + *hc->xhfc_memaddr = A_FIFO_DATA0; + hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0); + while (len) { + *hc->xhfc_memdata = *data; + data++; + len--; + } +} + +/* read fifo data (EMBSD) */ +void +read_fifo_embsd(struct hfc_multi *hc, u_char *data, int len) +{ + hc->immap->im_ioport.iop_padat |= PA_XHFC_A0; + *hc->xhfc_memaddr = A_FIFO_DATA0; + hc->immap->im_ioport.iop_padat &= ~(PA_XHFC_A0); + while (len) { + *data = (u_char)(*hc->xhfc_memdata); + data++; + len--; + } +} + +static int +setup_embedded(struct hfc_multi *hc, struct hm_map *m) +{ + printk(KERN_INFO + "HFC-multi: card manufacturer: '%s' card name: '%s' clock: %s\n", + m->vendor_name, m->card_name, m->clock2 ? "double" : "normal"); + + hc->pci_dev = NULL; + if (m->clock2) + test_and_set_bit(HFC_CHIP_CLOCK2, &hc->chip); + + hc->leds = m->leds; + hc->ledstate = 0xAFFEAFFE; + hc->opticalsupport = m->opticalsupport; + + hc->pci_iobase = 0; + hc->pci_membase = 0; + hc->xhfc_membase = NULL; + hc->xhfc_memaddr = NULL; + hc->xhfc_memdata = NULL; + + /* set memory access methods */ + if (m->io_mode) /* use mode from card config */ + hc->io_mode = m->io_mode; + switch (hc->io_mode) { + case HFC_IO_MODE_EMBSD: + test_and_set_bit(HFC_CHIP_EMBSD, &hc->chip); + hc->slots = 128; /* required */ + /* fall through */ + hc->HFC_outb = HFC_outb_embsd; + hc->HFC_inb = HFC_inb_embsd; + hc->HFC_inw = HFC_inw_embsd; + hc->HFC_wait = HFC_wait_embsd; + hc->read_fifo = read_fifo_embsd; + hc->write_fifo = write_fifo_embsd; + hc->xhfc_origmembase = XHFC_MEMBASE + XHFC_OFFSET * hc->id; + hc->xhfc_membase = (u_char *)ioremap(hc->xhfc_origmembase, + XHFC_MEMSIZE); + if (!hc->xhfc_membase) { + printk(KERN_WARNING + "HFC-multi: failed to remap xhfc address space. " + "(internal error)\n"); + return -EIO; + } + hc->xhfc_memaddr = (u_long *)(hc->xhfc_membase + 4); + hc->xhfc_memdata = (u_long *)(hc->xhfc_membase); + printk(KERN_INFO + "HFC-multi: xhfc_membase:%#lx xhfc_origmembase:%#lx " + "xhfc_memaddr:%#lx xhfc_memdata:%#lx\n", + (u_long)hc->xhfc_membase, hc->xhfc_origmembase, + (u_long)hc->xhfc_memaddr, (u_long)hc->xhfc_memdata); + break; + default: + printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n"); + return -EIO; + } + + /* Prepare the MPC8XX PortA 10 as output (address/data selector) */ + hc->immap = (struct immap *)(IMAP_ADDR); + hc->immap->im_ioport.iop_papar &= ~(PA_XHFC_A0); + hc->immap->im_ioport.iop_paodr &= ~(PA_XHFC_A0); + hc->immap->im_ioport.iop_padir |= PA_XHFC_A0; + + /* Prepare the MPC8xx PortB __X__ as input (ISDN__X__IRQ) */ + hc->pb_irqmsk = (PB_XHFC_IRQ1 << hc->id); + hc->immap->im_cpm.cp_pbpar &= ~(hc->pb_irqmsk); + hc->immap->im_cpm.cp_pbodr &= ~(hc->pb_irqmsk); + hc->immap->im_cpm.cp_pbdir &= ~(hc->pb_irqmsk); + + /* At this point the needed config is done */ + /* fifos are still not enabled */ + return 0; +} diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c index bc0d3ef..5be4edf 100644 --- a/drivers/isdn/hardware/mISDN/hfcmulti.c +++ b/drivers/isdn/hardware/mISDN/hfcmulti.c @@ -139,6 +139,10 @@ * Selects interface with clock source for mISDN and applications. * Set to card number starting with 1. Set to -1 to disable. * By default, the first card is used as clock source. + * + * hwid: + * NOTE: only one hwid value must be given once + * Enable special embedded devices with XHFC controllers. */ /* @@ -206,6 +210,11 @@ static int clock; static uint timer; static uint clockdelay_te = CLKDEL_TE; static uint clockdelay_nt = CLKDEL_NT; +#define HWID_NONE 0 +#define HWID_MINIP4 1 +#define HWID_MINIP8 2 +#define HWID_MINIP16 3 +static uint hwid = HWID_NONE; static int HFC_cnt, Port_cnt, PCM_cnt = 99; @@ -223,6 +232,7 @@ module_param_array(pcm, int, NULL, S_IRUGO | S_IWUSR); module_param_array(dslot, int, NULL, S_IRUGO | S_IWUSR); module_param_array(iomode, uint, NULL, S_IRUGO | S_IWUSR); module_param_array(port, uint, NULL, S_IRUGO | S_IWUSR); +module_param(hwid, uint, S_IRUGO | S_IWUSR); /* The hardware ID */ #ifdef HFC_REGISTER_DEBUG #define HFC_outb(hc, reg, val) \ @@ -252,6 +262,10 @@ module_param_array(port, uint, NULL, S_IRUGO | S_IWUSR); #define HFC_wait_nodebug(hc) (hc->HFC_wait_nodebug(hc)) #endif +#ifdef CONFIG_MISDN_HFCMULTI_8xx +#include "hfc_multi_8xx.h" +#endif + /* HFC_IO_MODE_PCIMEM */ static void #ifdef HFC_REGISTER_DEBUG @@ -928,7 +942,7 @@ hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm) writel(pv, plx_acc_32); if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) { pcmmaster = hc; - if (hc->type == 1) { + if (hc->ctype == HFC_TYPE_E1) { if (debug & DEBUG_HFCMULTI_PLXSD) printk(KERN_DEBUG "Schedule SYNC_I\n"); @@ -949,7 +963,8 @@ hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm) pv |= PLX_SYNC_O_EN; writel(pv, plx_acc_32); /* switch to jatt PLL, if not disabled by RX_SYNC */ - if (hc->type == 1 && !test_bit(HFC_CHIP_RX_SYNC, &hc->chip)) { + if (hc->ctype == HFC_TYPE_E1 + && !test_bit(HFC_CHIP_RX_SYNC, &hc->chip)) { if (debug & DEBUG_HFCMULTI_PLXSD) printk(KERN_DEBUG "Schedule jatt PLL\n"); hc->e1_resync |= 2; /* switch to jatt */ @@ -961,7 +976,7 @@ hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm) printk(KERN_DEBUG "id=%d (0x%p) = PCM master syncronized " "with QUARTZ\n", hc->id, hc); - if (hc->type == 1) { + if (hc->ctype == HFC_TYPE_E1) { /* Use the crystal clock for the PCM master card */ if (debug & DEBUG_HFCMULTI_PLXSD) @@ -972,7 +987,7 @@ hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm) if (debug & DEBUG_HFCMULTI_PLXSD) printk(KERN_DEBUG "QUARTZ is automatically " - "enabled by HFC-%dS\n", hc->type); + "enabled by HFC-%dS\n", hc->ctype); } plx_acc_32 = hc->plx_membase + PLX_GPIOC; pv = readl(plx_acc_32); @@ -1060,13 +1075,16 @@ release_io_hfcmulti(struct hfc_multi *hc) /* disable memory mapped ports / io ports */ test_and_clear_bit(HFC_CHIP_PLXSD, &hc->chip); /* prevent resync */ - pci_write_config_word(hc->pci_dev, PCI_COMMAND, 0); + if (hc->pci_dev) + pci_write_config_word(hc->pci_dev, PCI_COMMAND, 0); if (hc->pci_membase) iounmap(hc->pci_membase); if (hc->plx_membase) iounmap(hc->plx_membase); if (hc->pci_iobase) release_region(hc->pci_iobase, 8); + if (hc->xhfc_membase) + iounmap((void *)hc->xhfc_membase); if (hc->pci_dev) { pci_disable_device(hc->pci_dev); @@ -1100,8 +1118,9 @@ init_chip(struct hfc_multi *hc) /* revision check */ if (debug & DEBUG_HFCMULTI_INIT) printk(KERN_DEBUG "%s: entered\n", __func__); - val = HFC_inb(hc, R_CHIP_ID)>>4; - if (val != 0x8 && val != 0xc && val != 0xe) { + val = HFC_inb(hc, R_CHIP_ID); + if ((val>>4) != 0x8 && (val>>4) != 0xc && (val>>4) != 0xe + && (val>>1) != 0x31) { printk(KERN_INFO "HFC_multi: unknown CHIP_ID:%x\n", (u_int)val); err = -EIO; goto out; @@ -1109,8 +1128,9 @@ init_chip(struct hfc_multi *hc) rev = HFC_inb(hc, R_CHIP_RV); printk(KERN_INFO "HFC_multi: detected HFC with chip ID=0x%lx revision=%ld%s\n", - val, rev, (rev == 0) ? " (old FIFO handling)" : ""); - if (rev == 0) { + val, rev, (rev == 0 && (hc->ctype != HFC_TYPE_XHFC)) ? + " (old FIFO handling)" : ""); + if (hc->ctype != HFC_TYPE_XHFC && rev == 0) { test_and_set_bit(HFC_CHIP_REVISION0, &hc->chip); printk(KERN_WARNING "HFC_multi: NOTE: Your chip is revision 0, " @@ -1152,6 +1172,12 @@ init_chip(struct hfc_multi *hc) hc->Zlen = 8000; hc->DTMFbase = 0x2000; } + if (hc->ctype == HFC_TYPE_XHFC) { + hc->Flen = 0x8; + hc->Zmin = 0x0; + hc->Zlen = 64; + hc->DTMFbase = 0x0; + } hc->max_trans = poll << 1; if (hc->max_trans > hc->Zlen) hc->max_trans = hc->Zlen; @@ -1211,6 +1237,9 @@ init_chip(struct hfc_multi *hc) hc->hw.r_pcm_md0 = V_F0_LEN; /* shift clock for DSP */ } + if (test_bit(HFC_CHIP_EMBSD, &hc->chip)) + hc->hw.r_pcm_md0 = V_F0_LEN; /* shift clock for DSP */ + /* we only want the real Z2 read-pointer for revision > 0 */ if (!test_bit(HFC_CHIP_REVISION0, &hc->chip)) hc->hw.r_ram_sz |= V_FZ_MD; @@ -1234,15 +1263,24 @@ init_chip(struct hfc_multi *hc) /* soft reset */ HFC_outb(hc, R_CTRL, hc->hw.r_ctrl); - HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz); + if (hc->ctype == HFC_TYPE_XHFC) + HFC_outb(hc, 0x0C /* R_FIFO_THRES */, + 0x11 /* 16 Bytes TX/RX */); + else + HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz); HFC_outb(hc, R_FIFO_MD, 0); - hc->hw.r_cirm = V_SRES | V_HFCRES | V_PCMRES | V_STRES | V_RLD_EPR; + if (hc->ctype == HFC_TYPE_XHFC) + hc->hw.r_cirm = V_SRES | V_HFCRES | V_PCMRES | V_STRES; + else + hc->hw.r_cirm = V_SRES | V_HFCRES | V_PCMRES | V_STRES + | V_RLD_EPR; HFC_outb(hc, R_CIRM, hc->hw.r_cirm); udelay(100); hc->hw.r_cirm = 0; HFC_outb(hc, R_CIRM, hc->hw.r_cirm); udelay(100); - HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz); + if (hc->ctype != HFC_TYPE_XHFC) + HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz); /* Speech Design PLX bridge pcm and sync mode */ if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { @@ -1278,13 +1316,16 @@ init_chip(struct hfc_multi *hc) HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0xa0); if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) HFC_outb(hc, R_PCM_MD2, V_SYNC_SRC); /* sync via SYNC_I / O */ + else if (test_bit(HFC_CHIP_EMBSD, &hc->chip)) + HFC_outb(hc, R_PCM_MD2, 0x10); /* V_C2O_EN */ else HFC_outb(hc, R_PCM_MD2, 0x00); /* sync from interface */ HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00); for (i = 0; i < 256; i++) { HFC_outb_nodebug(hc, R_SLOT, i); HFC_outb_nodebug(hc, A_SL_CFG, 0); - HFC_outb_nodebug(hc, A_CONF, 0); + if (hc->ctype != HFC_TYPE_XHFC) + HFC_outb_nodebug(hc, A_CONF, 0); hc->slot_owner[i] = -1; } @@ -1296,6 +1337,9 @@ init_chip(struct hfc_multi *hc) HFC_outb(hc, R_BRG_PCM_CFG, V_PCM_CLK); } + if (test_bit(HFC_CHIP_EMBSD, &hc->chip)) + HFC_outb(hc, 0x02 /* R_CLK_CFG */, 0x40 /* V_CLKO_OFF */); + /* B410P GPIO */ if (test_bit(HFC_CHIP_B410P, &hc->chip)) { printk(KERN_NOTICE "Setting GPIOs\n"); @@ -1424,7 +1468,7 @@ controller_fail: hc->hw.r_irqmsk_misc |= V_TI_IRQMSK; /* set E1 state machine IRQ */ - if (hc->type == 1) + if (hc->ctype == HFC_TYPE_E1) hc->hw.r_irqmsk_misc |= V_STA_IRQMSK; /* set DTMF detection */ @@ -1444,7 +1488,8 @@ controller_fail: r_conf_en = V_CONF_EN | V_ULAW; else r_conf_en = V_CONF_EN; - HFC_outb(hc, R_CONF_EN, r_conf_en); + if (hc->ctype != HFC_TYPE_XHFC) + HFC_outb(hc, R_CONF_EN, r_conf_en); /* setting leds */ switch (hc->leds) { @@ -1468,16 +1513,23 @@ controller_fail: break; } + if (test_bit(HFC_CHIP_EMBSD, &hc->chip)) { + hc->hw.r_st_sync = 0x10; /* V_AUTO_SYNCI */ + HFC_outb(hc, R_ST_SYNC, hc->hw.r_st_sync); + } + /* set master clock */ if (hc->masterclk >= 0) { if (debug & DEBUG_HFCMULTI_INIT) printk(KERN_DEBUG "%s: setting ST master clock " "to port %d (0..%d)\n", __func__, hc->masterclk, hc->ports-1); - hc->hw.r_st_sync = hc->masterclk | V_AUTO_SYNC; + hc->hw.r_st_sync |= (hc->masterclk | V_AUTO_SYNC); HFC_outb(hc, R_ST_SYNC, hc->hw.r_st_sync); } + + /* setting misc irq */ HFC_outb(hc, R_IRQMSK_MISC, hc->hw.r_irqmsk_misc); if (debug & DEBUG_HFCMULTI_INIT) @@ -1929,7 +1981,7 @@ next_frame: Fspace = 1; } /* one frame only for ST D-channels, to allow resending */ - if (hc->type != 1 && dch) { + if (hc->ctype != HFC_TYPE_E1 && dch) { if (f1 != f2) Fspace = 0; } @@ -1971,12 +2023,22 @@ next_frame: "slot_tx %d\n", __func__, ch, slot_tx); /* connect slot */ - HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 | - V_HDLC_TRP | V_IFF); + if (hc->ctype == HFC_TYPE_XHFC) + HFC_outb(hc, A_CON_HDLC, 0xc0 + | 0x07 << 2 | V_HDLC_TRP | V_IFF); + /* Enable FIFO, no interrupt */ + else + HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 | + V_HDLC_TRP | V_IFF); HFC_outb_nodebug(hc, R_FIFO, ch<<1 | 1); HFC_wait_nodebug(hc); - HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 | - V_HDLC_TRP | V_IFF); + if (hc->ctype == HFC_TYPE_XHFC) + HFC_outb(hc, A_CON_HDLC, 0xc0 + | 0x07 << 2 | V_HDLC_TRP | V_IFF); + /* Enable FIFO, no interrupt */ + else + HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 | + V_HDLC_TRP | V_IFF); HFC_outb_nodebug(hc, R_FIFO, ch<<1); HFC_wait_nodebug(hc); } @@ -2004,10 +2066,22 @@ next_frame: "FIFO data: channel %d slot_tx %d\n", __func__, ch, slot_tx); /* disconnect slot */ - HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | V_HDLC_TRP | V_IFF); + if (hc->ctype == HFC_TYPE_XHFC) + HFC_outb(hc, A_CON_HDLC, 0x80 + | 0x07 << 2 | V_HDLC_TRP | V_IFF); + /* Enable FIFO, no interrupt */ + else + HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | + V_HDLC_TRP | V_IFF); HFC_outb_nodebug(hc, R_FIFO, ch<<1 | 1); HFC_wait_nodebug(hc); - HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | V_HDLC_TRP | V_IFF); + if (hc->ctype == HFC_TYPE_XHFC) + HFC_outb(hc, A_CON_HDLC, 0x80 + | 0x07 << 2 | V_HDLC_TRP | V_IFF); + /* Enable FIFO, no interrupt */ + else + HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | + V_HDLC_TRP | V_IFF); HFC_outb_nodebug(hc, R_FIFO, ch<<1); HFC_wait_nodebug(hc); } @@ -2327,7 +2401,7 @@ handle_timer_irq(struct hfc_multi *hc) spin_unlock_irqrestore(&HFClock, flags); } - if (hc->type != 1 || hc->e1_state == 1) + if (hc->ctype != HFC_TYPE_E1 || hc->e1_state == 1) for (ch = 0; ch <= 31; ch++) { if (hc->created[hc->chan[ch].port]) { hfcmulti_tx(hc, ch); @@ -2350,7 +2424,7 @@ handle_timer_irq(struct hfc_multi *hc) } } } - if (hc->type == 1 && hc->created[0]) { + if (hc->ctype == HFC_TYPE_E1 && hc->created[0]) { dch = hc->chan[hc->dslot].dch; if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dslot].cfg)) { /* LOS */ @@ -2610,7 +2684,10 @@ hfcmulti_interrupt(int intno, void *dev_id) "card %d, this is no bug.\n", hc->id + 1, irqsem); irqsem = hc->id + 1; #endif - +#ifdef CONFIG_MISDN_HFCMULTI_8xx + if (hc->immap->im_cpm.cp_pbdat & hc->pb_irqmsk) + goto irq_notforus; +#endif if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { spin_lock_irqsave(&plx_lock, flags); plx_acc = hc->plx_membase + PLX_INTCSR; @@ -2650,7 +2727,7 @@ hfcmulti_interrupt(int intno, void *dev_id) } hc->irqcnt++; if (r_irq_statech) { - if (hc->type != 1) + if (hc->ctype != HFC_TYPE_E1) ph_state_irq(hc, r_irq_statech); } if (status & V_EXT_IRQSTA) @@ -2664,7 +2741,7 @@ hfcmulti_interrupt(int intno, void *dev_id) r_irq_misc = HFC_inb_nodebug(hc, R_IRQ_MISC); r_irq_misc &= hc->hw.r_irqmsk_misc; /* ignore disabled irqs */ if (r_irq_misc & V_STA_IRQ) { - if (hc->type == 1) { + if (hc->ctype == HFC_TYPE_E1) { /* state machine */ dch = hc->chan[hc->dslot].dch; e1_syncsta = HFC_inb_nodebug(hc, R_SYNC_STA); @@ -2786,7 +2863,8 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx, if (hc->slot_owner[oslot_tx<<1] == ch) { HFC_outb(hc, R_SLOT, oslot_tx << 1); HFC_outb(hc, A_SL_CFG, 0); - HFC_outb(hc, A_CONF, 0); + if (hc->ctype != HFC_TYPE_XHFC) + HFC_outb(hc, A_CONF, 0); hc->slot_owner[oslot_tx<<1] = -1; } else { if (debug & DEBUG_HFCMULTI_MODE) @@ -2839,7 +2917,9 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx, flow_tx, routing, conf); HFC_outb(hc, R_SLOT, slot_tx << 1); HFC_outb(hc, A_SL_CFG, (ch<<1) | routing); - HFC_outb(hc, A_CONF, (conf < 0) ? 0 : (conf | V_CONF_SL)); + if (hc->ctype != HFC_TYPE_XHFC) + HFC_outb(hc, A_CONF, + (conf < 0) ? 0 : (conf | V_CONF_SL)); hc->slot_owner[slot_tx << 1] = ch; hc->chan[ch].slot_tx = slot_tx; hc->chan[ch].bank_tx = bank_tx; @@ -2889,7 +2969,7 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx, HFC_outb(hc, A_IRQ_MSK, 0); HFC_outb(hc, R_INC_RES_FIFO, V_RES_F); HFC_wait(hc); - if (hc->chan[ch].bch && hc->type != 1) { + if (hc->chan[ch].bch && hc->ctype != HFC_TYPE_E1) { hc->hw.a_st_ctrl0[hc->chan[ch].port] &= ((ch & 0x3) == 0)? ~V_B1_EN: ~V_B2_EN; HFC_outb(hc, R_ST_SEL, hc->chan[ch].port); @@ -2965,8 +3045,13 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx, /* enable TX fifo */ HFC_outb(hc, R_FIFO, ch << 1); HFC_wait(hc); - HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 | - V_HDLC_TRP | V_IFF); + if (hc->ctype == HFC_TYPE_XHFC) + HFC_outb(hc, A_CON_HDLC, flow_tx | 0x07 << 2 | + V_HDLC_TRP | V_IFF); + /* Enable FIFO, no interrupt */ + else + HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 | + V_HDLC_TRP | V_IFF); HFC_outb(hc, A_SUBCH_CFG, 0); HFC_outb(hc, A_IRQ_MSK, 0); HFC_outb(hc, R_INC_RES_FIFO, V_RES_F); @@ -2976,13 +3061,19 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx, /* enable RX fifo */ HFC_outb(hc, R_FIFO, (ch<<1)|1); HFC_wait(hc); - HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00 | V_HDLC_TRP); + if (hc->ctype == HFC_TYPE_XHFC) + HFC_outb(hc, A_CON_HDLC, flow_rx | 0x07 << 2 | + V_HDLC_TRP); + /* Enable FIFO, no interrupt*/ + else + HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00 | + V_HDLC_TRP); HFC_outb(hc, A_SUBCH_CFG, 0); HFC_outb(hc, A_IRQ_MSK, 0); HFC_outb(hc, R_INC_RES_FIFO, V_RES_F); HFC_wait(hc); } - if (hc->type != 1) { + if (hc->ctype != HFC_TYPE_E1) { hc->hw.a_st_ctrl0[hc->chan[ch].port] |= ((ch & 0x3) == 0) ? V_B1_EN : V_B2_EN; HFC_outb(hc, R_ST_SEL, hc->chan[ch].port); @@ -3003,7 +3094,7 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx, /* enable TX fifo */ HFC_outb(hc, R_FIFO, ch<<1); HFC_wait(hc); - if (hc->type == 1 || hc->chan[ch].bch) { + if (hc->ctype == HFC_TYPE_E1 || hc->chan[ch].bch) { /* E1 or B-channel */ HFC_outb(hc, A_CON_HDLC, flow_tx | 0x04); HFC_outb(hc, A_SUBCH_CFG, 0); @@ -3019,7 +3110,7 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx, HFC_outb(hc, R_FIFO, (ch<<1)|1); HFC_wait(hc); HFC_outb(hc, A_CON_HDLC, flow_rx | 0x04); - if (hc->type == 1 || hc->chan[ch].bch) + if (hc->ctype == HFC_TYPE_E1 || hc->chan[ch].bch) HFC_outb(hc, A_SUBCH_CFG, 0); /* full 8 bits */ else HFC_outb(hc, A_SUBCH_CFG, 2); /* 2 bits dchannel */ @@ -3028,7 +3119,7 @@ mode_hfcmulti(struct hfc_multi *hc, int ch, int protocol, int slot_tx, HFC_wait(hc); if (hc->chan[ch].bch) { test_and_set_bit(FLG_HDLC, &hc->chan[ch].bch->Flags); - if (hc->type != 1) { + if (hc->ctype != HFC_TYPE_E1) { hc->hw.a_st_ctrl0[hc->chan[ch].port] |= ((ch&0x3) == 0) ? V_B1_EN : V_B2_EN; HFC_outb(hc, R_ST_SEL, hc->chan[ch].port); @@ -3108,7 +3199,7 @@ hfcm_l1callback(struct dchannel *dch, u_int cmd) case HW_RESET_REQ: /* start activation */ spin_lock_irqsave(&hc->lock, flags); - if (hc->type == 1) { + if (hc->ctype == HFC_TYPE_E1) { if (debug & DEBUG_HFCMULTI_MSG) printk(KERN_DEBUG "%s: HW_RESET_REQ no BRI\n", @@ -3129,7 +3220,7 @@ hfcm_l1callback(struct dchannel *dch, u_int cmd) case HW_DEACT_REQ: /* start deactivation */ spin_lock_irqsave(&hc->lock, flags); - if (hc->type == 1) { + if (hc->ctype == HFC_TYPE_E1) { if (debug & DEBUG_HFCMULTI_MSG) printk(KERN_DEBUG "%s: HW_DEACT_REQ no BRI\n", @@ -3163,7 +3254,7 @@ hfcm_l1callback(struct dchannel *dch, u_int cmd) break; case HW_POWERUP_REQ: spin_lock_irqsave(&hc->lock, flags); - if (hc->type == 1) { + if (hc->ctype == HFC_TYPE_E1) { if (debug & DEBUG_HFCMULTI_MSG) printk(KERN_DEBUG "%s: HW_POWERUP_REQ no BRI\n", @@ -3240,7 +3331,7 @@ handle_dmsg(struct mISDNchannel *ch, struct sk_buff *skb) __func__, hc->chan[dch->slot].port, hc->ports-1); /* start activation */ - if (hc->type == 1) { + if (hc->ctype == HFC_TYPE_E1) { ph_state_change(dch); if (debug & DEBUG_HFCMULTI_STATE) printk(KERN_DEBUG @@ -3273,7 +3364,7 @@ handle_dmsg(struct mISDNchannel *ch, struct sk_buff *skb) __func__, hc->chan[dch->slot].port, hc->ports-1); /* start deactivation */ - if (hc->type == 1) { + if (hc->ctype == HFC_TYPE_E1) { if (debug & DEBUG_HFCMULTI_MSG) printk(KERN_DEBUG "%s: PH_DEACTIVATE no BRI\n", @@ -3493,6 +3584,8 @@ channel_bctrl(struct bchannel *bch, struct mISDN_ctrl_req *cq) features->hfc_id = hc->id; if (test_bit(HFC_CHIP_DTMF, &hc->chip)) features->hfc_dtmf = 1; + if (test_bit(HFC_CHIP_CONF, &hc->chip)) + features->hfc_conf = 1; features->hfc_loops = 0; if (test_bit(HFC_CHIP_B410P, &hc->chip)) { features->hfc_echocanhw = 1; @@ -3630,7 +3723,7 @@ ph_state_change(struct dchannel *dch) hc = dch->hw; ch = dch->slot; - if (hc->type == 1) { + if (hc->ctype == HFC_TYPE_E1) { if (dch->dev.D.protocol == ISDN_P_TE_E1) { if (debug & DEBUG_HFCMULTI_STATE) printk(KERN_DEBUG @@ -3755,7 +3848,7 @@ hfcmulti_initmode(struct dchannel *dch) if (debug & DEBUG_HFCMULTI_INIT) printk(KERN_DEBUG "%s: entered\n", __func__); - if (hc->type == 1) { + if (hc->ctype == HFC_TYPE_E1) { hc->chan[hc->dslot].slot_tx = -1; hc->chan[hc->dslot].slot_rx = -1; hc->chan[hc->dslot].conf = -1; @@ -3904,6 +3997,11 @@ hfcmulti_initmode(struct dchannel *dch) } if (!test_bit(HFC_CFG_NONCAP_TX, &hc->chan[i].cfg)) hc->hw.a_st_ctrl0[pt] |= V_TX_LI; + if (hc->ctype == HFC_TYPE_XHFC) { + hc->hw.a_st_ctrl0[pt] |= 0x40 /* V_ST_PU_CTRL */; + HFC_outb(hc, 0x35 /* A_ST_CTRL3 */, + 0x7c << 1 /* V_ST_PULSE */); + } /* line setup */ HFC_outb(hc, A_ST_CTRL0, hc->hw.a_st_ctrl0[pt]); /* disable E-channel */ @@ -3990,7 +4088,7 @@ open_bchannel(struct hfc_multi *hc, struct dchannel *dch, return -EINVAL; if (rq->protocol == ISDN_P_NONE) return -EINVAL; - if (hc->type == 1) + if (hc->ctype == HFC_TYPE_E1) ch = rq->adr.channel; else ch = (rq->adr.channel - 1) + (dch->slot - 2); @@ -4081,7 +4179,7 @@ hfcm_dctrl(struct mISDNchannel *ch, u_int cmd, void *arg) switch (rq->protocol) { case ISDN_P_TE_S0: case ISDN_P_NT_S0: - if (hc->type == 1) { + if (hc->ctype == HFC_TYPE_E1) { err = -EINVAL; break; } @@ -4089,7 +4187,7 @@ hfcm_dctrl(struct mISDNchannel *ch, u_int cmd, void *arg) break; case ISDN_P_TE_E1: case ISDN_P_NT_E1: - if (hc->type != 1) { + if (hc->ctype != HFC_TYPE_E1) { err = -EINVAL; break; } @@ -4156,13 +4254,13 @@ init_card(struct hfc_multi *hc) disable_hwirq(hc); spin_unlock_irqrestore(&hc->lock, flags); - if (request_irq(hc->pci_dev->irq, hfcmulti_interrupt, IRQF_SHARED, + if (request_irq(hc->irq, hfcmulti_interrupt, IRQF_SHARED, "HFC-multi", hc)) { printk(KERN_WARNING "mISDN: Could not get interrupt %d.\n", - hc->pci_dev->irq); + hc->irq); + hc->irq = 0; return -EIO; } - hc->irq = hc->pci_dev->irq; if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { spin_lock_irqsave(&plx_lock, plx_flags); @@ -4269,6 +4367,10 @@ setup_pci(struct hfc_multi *hc, struct pci_dev *pdev, hc->ledstate = 0xAFFEAFFE; hc->opticalsupport = m->opticalsupport; + hc->pci_iobase = 0; + hc->pci_membase = NULL; + hc->plx_membase = NULL; + /* set memory access methods */ if (m->io_mode) /* use mode from card config */ hc->io_mode = m->io_mode; @@ -4276,44 +4378,12 @@ setup_pci(struct hfc_multi *hc, struct pci_dev *pdev, case HFC_IO_MODE_PLXSD: test_and_set_bit(HFC_CHIP_PLXSD, &hc->chip); hc->slots = 128; /* required */ - /* fall through */ - case HFC_IO_MODE_PCIMEM: hc->HFC_outb = HFC_outb_pcimem; hc->HFC_inb = HFC_inb_pcimem; hc->HFC_inw = HFC_inw_pcimem; hc->HFC_wait = HFC_wait_pcimem; hc->read_fifo = read_fifo_pcimem; hc->write_fifo = write_fifo_pcimem; - break; - case HFC_IO_MODE_REGIO: - hc->HFC_outb = HFC_outb_regio; - hc->HFC_inb = HFC_inb_regio; - hc->HFC_inw = HFC_inw_regio; - hc->HFC_wait = HFC_wait_regio; - hc->read_fifo = read_fifo_regio; - hc->write_fifo = write_fifo_regio; - break; - default: - printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n"); - pci_disable_device(hc->pci_dev); - return -EIO; - } - hc->HFC_outb_nodebug = hc->HFC_outb; - hc->HFC_inb_nodebug = hc->HFC_inb; - hc->HFC_inw_nodebug = hc->HFC_inw; - hc->HFC_wait_nodebug = hc->HFC_wait; -#ifdef HFC_REGISTER_DEBUG - hc->HFC_outb = HFC_outb_debug; - hc->HFC_inb = HFC_inb_debug; - hc->HFC_inw = HFC_inw_debug; - hc->HFC_wait = HFC_wait_debug; -#endif - hc->pci_iobase = 0; - hc->pci_membase = NULL; - hc->plx_membase = NULL; - - switch (hc->io_mode) { - case HFC_IO_MODE_PLXSD: hc->plx_origmembase = hc->pci_dev->resource[0].start; /* MEMBASE 1 is PLX PCI Bridge */ @@ -4361,6 +4431,12 @@ setup_pci(struct hfc_multi *hc, struct pci_dev *pdev, pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO); break; case HFC_IO_MODE_PCIMEM: + hc->HFC_outb = HFC_outb_pcimem; + hc->HFC_inb = HFC_inb_pcimem; + hc->HFC_inw = HFC_inw_pcimem; + hc->HFC_wait = HFC_wait_pcimem; + hc->read_fifo = read_fifo_pcimem; + hc->write_fifo = write_fifo_pcimem; hc->pci_origmembase = hc->pci_dev->resource[1].start; if (!hc->pci_origmembase) { printk(KERN_WARNING @@ -4377,12 +4453,18 @@ setup_pci(struct hfc_multi *hc, struct pci_dev *pdev, pci_disable_device(hc->pci_dev); return -EIO; } - printk(KERN_INFO "card %d: defined at MEMBASE %#lx (%#lx) IRQ %d " - "HZ %d leds-type %d\n", hc->id, (u_long)hc->pci_membase, + printk(KERN_INFO "card %d: defined at MEMBASE %#lx (%#lx) IRQ " + "%d HZ %d leds-type %d\n", hc->id, (u_long)hc->pci_membase, hc->pci_origmembase, hc->pci_dev->irq, HZ, hc->leds); pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO); break; case HFC_IO_MODE_REGIO: + hc->HFC_outb = HFC_outb_regio; + hc->HFC_inb = HFC_inb_regio; + hc->HFC_inw = HFC_inw_regio; + hc->HFC_wait = HFC_wait_regio; + hc->read_fifo = read_fifo_regio; + hc->write_fifo = write_fifo_regio; hc->pci_iobase = (u_int) hc->pci_dev->resource[0].start; if (!hc->pci_iobase) { printk(KERN_WARNING @@ -4464,7 +4546,7 @@ release_port(struct hfc_multi *hc, struct dchannel *dch) dch->timer.function = NULL; } - if (hc->type == 1) { /* E1 */ + if (hc->ctype == HFC_TYPE_E1) { /* E1 */ /* remove sync */ if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) { hc->syncronized = 0; @@ -4863,9 +4945,15 @@ init_multi_port(struct hfc_multi *hc, int pt) test_and_set_bit(HFC_CFG_DIS_ECHANNEL, &hc->chan[i + 2].cfg); } - snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-%ds.%d-%d", - hc->type, HFC_cnt + 1, pt + 1); - ret = mISDN_register_device(&dch->dev, &hc->pci_dev->dev, name); + if (hc->ctype == HFC_TYPE_XHFC) { + snprintf(name, MISDN_MAX_IDLEN - 1, "xhfc.%d-%d", + HFC_cnt + 1, pt + 1); + ret = mISDN_register_device(&dch->dev, NULL, name); + } else { + snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-%ds.%d-%d", + hc->ctype, HFC_cnt + 1, pt + 1); + ret = mISDN_register_device(&dch->dev, &hc->pci_dev->dev, name); + } if (ret) goto free_chan; hc->created[pt] = 1; @@ -4876,9 +4964,9 @@ free_chan: } static int -hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent) +hfcmulti_init(struct hm_map *m, struct pci_dev *pdev, + const struct pci_device_id *ent) { - struct hm_map *m = (struct hm_map *)ent->driver_data; int ret_err = 0; int pt; struct hfc_multi *hc; @@ -4913,16 +5001,18 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent) } spin_lock_init(&hc->lock); hc->mtyp = m; - hc->type = m->type; + hc->ctype = m->type; hc->ports = m->ports; hc->id = HFC_cnt; hc->pcm = pcm[HFC_cnt]; hc->io_mode = iomode[HFC_cnt]; - if (dslot[HFC_cnt] < 0 && hc->type == 1) { + if (dslot[HFC_cnt] < 0 && hc->ctype == HFC_TYPE_E1) { hc->dslot = 0; printk(KERN_INFO "HFC-E1 card has disabled D-channel, but " "31 B-channels\n"); - } if (dslot[HFC_cnt] > 0 && dslot[HFC_cnt] < 32 && hc->type == 1) { + } + if (dslot[HFC_cnt] > 0 && dslot[HFC_cnt] < 32 + && hc->ctype == HFC_TYPE_E1) { hc->dslot = dslot[HFC_cnt]; printk(KERN_INFO "HFC-E1 card has alternating D-channel on " "time slot %d\n", dslot[HFC_cnt]); @@ -4944,8 +5034,11 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent) for (i = 0; i < (poll >> 1); i++) hc->silence_data[i] = hc->silence; - if (!(type[HFC_cnt] & 0x200)) - test_and_set_bit(HFC_CHIP_DTMF, &hc->chip); + if (hc->ctype != HFC_TYPE_XHFC) { + if (!(type[HFC_cnt] & 0x200)) + test_and_set_bit(HFC_CHIP_DTMF, &hc->chip); + test_and_set_bit(HFC_CHIP_CONF, &hc->chip); + } if (type[HFC_cnt] & 0x800) test_and_set_bit(HFC_CHIP_PCM_SLAVE, &hc->chip); @@ -4969,8 +5062,18 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent) printk(KERN_NOTICE "Watchdog enabled\n"); } - /* setup pci, hc->slots may change due to PLXSD */ - ret_err = setup_pci(hc, pdev, ent); + if (pdev && ent) + /* setup pci, hc->slots may change due to PLXSD */ + ret_err = setup_pci(hc, pdev, ent); + else +#ifdef CONFIG_MISDN_HFCMULTI_8xx + ret_err = setup_embedded(hc, m); +#else + { + printk(KERN_WARNING "Embedded IO Mode not selected\n"); + ret_err = -EIO; + } +#endif if (ret_err) { if (hc == syncmaster) syncmaster = NULL; @@ -4978,7 +5081,17 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent) return ret_err; } - /* crate channels */ + hc->HFC_outb_nodebug = hc->HFC_outb; + hc->HFC_inb_nodebug = hc->HFC_inb; + hc->HFC_inw_nodebug = hc->HFC_inw; + hc->HFC_wait_nodebug = hc->HFC_wait; +#ifdef HFC_REGISTER_DEBUG + hc->HFC_outb = HFC_outb_debug; + hc->HFC_inb = HFC_inb_debug; + hc->HFC_inw = HFC_inw_debug; + hc->HFC_wait = HFC_wait_debug; +#endif + /* create channels */ for (pt = 0; pt < hc->ports; pt++) { if (Port_cnt >= MAX_PORTS) { printk(KERN_ERR "too many ports (max=%d).\n", @@ -4986,7 +5099,7 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent) ret_err = -EINVAL; goto free_card; } - if (hc->type == 1) + if (hc->ctype == HFC_TYPE_E1) ret_err = init_e1_port(hc, m); else ret_err = init_multi_port(hc, pt); @@ -5070,6 +5183,7 @@ hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent) hc->iclock = mISDN_register_clock("HFCMulti", 0, clockctl, hc); /* initialize hardware */ + hc->irq = (m->irq) ? : hc->pci_dev->irq; ret_err = init_card(hc); if (ret_err) { printk(KERN_ERR "init card returns %d\n", ret_err); @@ -5120,45 +5234,47 @@ static void __devexit hfc_remove_pci(struct pci_dev *pdev) #define VENDOR_PRIM "PrimuX" static const struct hm_map hfcm_map[] = { -/*0*/ {VENDOR_BN, "HFC-1S Card (mini PCI)", 4, 1, 1, 3, 0, DIP_4S, 0}, -/*1*/ {VENDOR_BN, "HFC-2S Card", 4, 2, 1, 3, 0, DIP_4S, 0}, -/*2*/ {VENDOR_BN, "HFC-2S Card (mini PCI)", 4, 2, 1, 3, 0, DIP_4S, 0}, -/*3*/ {VENDOR_BN, "HFC-4S Card", 4, 4, 1, 2, 0, DIP_4S, 0}, -/*4*/ {VENDOR_BN, "HFC-4S Card (mini PCI)", 4, 4, 1, 2, 0, 0, 0}, -/*5*/ {VENDOR_CCD, "HFC-4S Eval (old)", 4, 4, 0, 0, 0, 0, 0}, -/*6*/ {VENDOR_CCD, "HFC-4S IOB4ST", 4, 4, 1, 2, 0, DIP_4S, 0}, -/*7*/ {VENDOR_CCD, "HFC-4S", 4, 4, 1, 2, 0, 0, 0}, -/*8*/ {VENDOR_DIG, "HFC-4S Card", 4, 4, 0, 2, 0, 0, HFC_IO_MODE_REGIO}, -/*9*/ {VENDOR_CCD, "HFC-4S Swyx 4xS0 SX2 QuadBri", 4, 4, 1, 2, 0, 0, 0}, -/*10*/ {VENDOR_JH, "HFC-4S (junghanns 2.0)", 4, 4, 1, 2, 0, 0, 0}, -/*11*/ {VENDOR_PRIM, "HFC-2S Primux Card", 4, 2, 0, 0, 0, 0, 0}, - -/*12*/ {VENDOR_BN, "HFC-8S Card", 8, 8, 1, 0, 0, 0, 0}, +/*0*/ {VENDOR_BN, "HFC-1S Card (mini PCI)", 4, 1, 1, 3, 0, DIP_4S, 0, 0}, +/*1*/ {VENDOR_BN, "HFC-2S Card", 4, 2, 1, 3, 0, DIP_4S, 0, 0}, +/*2*/ {VENDOR_BN, "HFC-2S Card (mini PCI)", 4, 2, 1, 3, 0, DIP_4S, 0, 0}, +/*3*/ {VENDOR_BN, "HFC-4S Card", 4, 4, 1, 2, 0, DIP_4S, 0, 0}, +/*4*/ {VENDOR_BN, "HFC-4S Card (mini PCI)", 4, 4, 1, 2, 0, 0, 0, 0}, +/*5*/ {VENDOR_CCD, "HFC-4S Eval (old)", 4, 4, 0, 0, 0, 0, 0, 0}, +/*6*/ {VENDOR_CCD, "HFC-4S IOB4ST", 4, 4, 1, 2, 0, DIP_4S, 0, 0}, +/*7*/ {VENDOR_CCD, "HFC-4S", 4, 4, 1, 2, 0, 0, 0, 0}, +/*8*/ {VENDOR_DIG, "HFC-4S Card", 4, 4, 0, 2, 0, 0, HFC_IO_MODE_REGIO, 0}, +/*9*/ {VENDOR_CCD, "HFC-4S Swyx 4xS0 SX2 QuadBri", 4, 4, 1, 2, 0, 0, 0, 0}, +/*10*/ {VENDOR_JH, "HFC-4S (junghanns 2.0)", 4, 4, 1, 2, 0, 0, 0, 0}, +/*11*/ {VENDOR_PRIM, "HFC-2S Primux Card", 4, 2, 0, 0, 0, 0, 0, 0}, + +/*12*/ {VENDOR_BN, "HFC-8S Card", 8, 8, 1, 0, 0, 0, 0, 0}, /*13*/ {VENDOR_BN, "HFC-8S Card (+)", 8, 8, 1, 8, 0, DIP_8S, - HFC_IO_MODE_REGIO}, -/*14*/ {VENDOR_CCD, "HFC-8S Eval (old)", 8, 8, 0, 0, 0, 0, 0}, -/*15*/ {VENDOR_CCD, "HFC-8S IOB4ST Recording", 8, 8, 1, 0, 0, 0, 0}, + HFC_IO_MODE_REGIO, 0}, +/*14*/ {VENDOR_CCD, "HFC-8S Eval (old)", 8, 8, 0, 0, 0, 0, 0, 0}, +/*15*/ {VENDOR_CCD, "HFC-8S IOB4ST Recording", 8, 8, 1, 0, 0, 0, 0, 0}, -/*16*/ {VENDOR_CCD, "HFC-8S IOB8ST", 8, 8, 1, 0, 0, 0, 0}, -/*17*/ {VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0}, -/*18*/ {VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0}, +/*16*/ {VENDOR_CCD, "HFC-8S IOB8ST", 8, 8, 1, 0, 0, 0, 0, 0}, +/*17*/ {VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0, 0}, +/*18*/ {VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0, 0}, -/*19*/ {VENDOR_BN, "HFC-E1 Card", 1, 1, 0, 1, 0, DIP_E1, 0}, -/*20*/ {VENDOR_BN, "HFC-E1 Card (mini PCI)", 1, 1, 0, 1, 0, 0, 0}, -/*21*/ {VENDOR_BN, "HFC-E1+ Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0}, -/*22*/ {VENDOR_BN, "HFC-E1 Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0}, +/*19*/ {VENDOR_BN, "HFC-E1 Card", 1, 1, 0, 1, 0, DIP_E1, 0, 0}, +/*20*/ {VENDOR_BN, "HFC-E1 Card (mini PCI)", 1, 1, 0, 1, 0, 0, 0, 0}, +/*21*/ {VENDOR_BN, "HFC-E1+ Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0, 0}, +/*22*/ {VENDOR_BN, "HFC-E1 Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0, 0}, -/*23*/ {VENDOR_CCD, "HFC-E1 Eval (old)", 1, 1, 0, 0, 0, 0, 0}, -/*24*/ {VENDOR_CCD, "HFC-E1 IOB1E1", 1, 1, 0, 1, 0, 0, 0}, -/*25*/ {VENDOR_CCD, "HFC-E1", 1, 1, 0, 1, 0, 0, 0}, +/*23*/ {VENDOR_CCD, "HFC-E1 Eval (old)", 1, 1, 0, 0, 0, 0, 0, 0}, +/*24*/ {VENDOR_CCD, "HFC-E1 IOB1E1", 1, 1, 0, 1, 0, 0, 0, 0}, +/*25*/ {VENDOR_CCD, "HFC-E1", 1, 1, 0, 1, 0, 0, 0, 0}, /*26*/ {VENDOR_CCD, "HFC-4S Speech Design", 4, 4, 0, 0, 0, 0, - HFC_IO_MODE_PLXSD}, + HFC_IO_MODE_PLXSD, 0}, /*27*/ {VENDOR_CCD, "HFC-E1 Speech Design", 1, 1, 0, 0, 0, 0, - HFC_IO_MODE_PLXSD}, -/*28*/ {VENDOR_CCD, "HFC-4S OpenVox", 4, 4, 1, 0, 0, 0, 0}, -/*29*/ {VENDOR_CCD, "HFC-2S OpenVox", 4, 2, 1, 0, 0, 0, 0}, -/*30*/ {VENDOR_CCD, "HFC-8S OpenVox", 8, 8, 1, 0, 0, 0, 0}, + HFC_IO_MODE_PLXSD, 0}, +/*28*/ {VENDOR_CCD, "HFC-4S OpenVox", 4, 4, 1, 0, 0, 0, 0, 0}, +/*29*/ {VENDOR_CCD, "HFC-2S OpenVox", 4, 2, 1, 0, 0, 0, 0, 0}, +/*30*/ {VENDOR_CCD, "HFC-8S OpenVox", 8, 8, 1, 0, 0, 0, 0, 0}, +/*31*/ {VENDOR_CCD, "XHFC-4S Speech Design", 5, 4, 0, 0, 0, 0, + HFC_IO_MODE_EMBSD, XHFC_IRQ}, }; #undef H @@ -5265,7 +5381,7 @@ hfcmulti_probe(struct pci_dev *pdev, const struct pci_device_id *ent) "Please contact the driver maintainer for support.\n"); return -ENODEV; } - ret = hfcmulti_init(pdev, ent); + ret = hfcmulti_init(m, pdev, ent); if (ret) return ret; HFC_cnt++; @@ -5295,6 +5411,8 @@ static int __init HFCmulti_init(void) { int err; + int i, xhfc = 0; + struct hm_map m; printk(KERN_INFO "mISDN: HFC-multi driver %s\n", HFC_MULTI_VERSION); @@ -5342,11 +5460,43 @@ HFCmulti_init(void) if (!clock) clock = 1; + /* Register the embedded devices. + * This should be done before the PCI cards registration */ + switch (hwid) { + case HWID_MINIP4: + xhfc = 1; + m = hfcm_map[31]; + break; + case HWID_MINIP8: + xhfc = 2; + m = hfcm_map[31]; + break; + case HWID_MINIP16: + xhfc = 4; + m = hfcm_map[31]; + break; + default: + xhfc = 0; + } + + for (i = 0; i < xhfc; ++i) { + err = hfcmulti_init(&m, NULL, NULL); + if (err) { + printk(KERN_ERR "error registering embedded driver: " + "%x\n", err); + return -err; + } + HFC_cnt++; + printk(KERN_INFO "%d devices registered\n", HFC_cnt); + } + + /* Register the PCI cards */ err = pci_register_driver(&hfcmultipci_driver); if (err < 0) { printk(KERN_ERR "error registering pci driver: %x\n", err); return err; } + return 0; } |