diff options
author | Steven Toth <stoth@linuxtv.org> | 2008-10-16 23:22:01 (GMT) |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2008-10-17 20:27:34 (GMT) |
commit | f11ec7d4ee4308592dbd9b1db645ab14fe32719c (patch) | |
tree | b34dec1b2416a86ef4a4e8aeb032179de695a299 /drivers/media/dvb/frontends/cx24116.c | |
parent | d93356a22014f555ab6f9fbeb697fc73b565841a (diff) | |
download | linux-fsl-qoriq-f11ec7d4ee4308592dbd9b1db645ab14fe32719c.tar.xz |
V4L/DVB (9254): cx24116: Checkpatch compliance #2
cx24116: Checkpatch compliance #2
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers/media/dvb/frontends/cx24116.c')
-rw-r--r-- | drivers/media/dvb/frontends/cx24116.c | 493 |
1 files changed, 256 insertions, 237 deletions
diff --git a/drivers/media/dvb/frontends/cx24116.c b/drivers/media/dvb/frontends/cx24116.c index deb36f4..751792a 100644 --- a/drivers/media/dvb/frontends/cx24116.c +++ b/drivers/media/dvb/frontends/cx24116.c @@ -41,10 +41,14 @@ #include "dvb_frontend.h" #include "cx24116.h" -static int debug = 0; +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); + #define dprintk(args...) \ do { \ - if (debug) printk ("cx24116: " args); \ + if (debug) \ + printk("cx24116: " args); \ } while (0) #define CX24116_DEFAULT_FIRMWARE "dvb-fe-cx24116.fw" @@ -116,12 +120,15 @@ static int debug = 0; /* DiSEqC tone burst */ static int toneburst = 1; +module_param(toneburst, int, 0644); +MODULE_PARM_DESC(toneburst, "DiSEqC toneburst 0=OFF, 1=TONE CACHE, 2=MESSAGE CACHE (default:1)"); /* SNR measurements */ -static int esno_snr = 0; +static int esno_snr; +module_param(esno_snr, int, 0644); +MODULE_PARM_DESC(debug, "SNR return units, 0=PERCENTAGE 0-100, 1=ESNO(db * 10) (default:0)"); -enum cmds -{ +enum cmds { CMD_SET_VCO = 0x10, CMD_TUNEREQUEST = 0x11, CMD_MPEGCONFIG = 0x13, @@ -138,8 +145,7 @@ enum cmds }; /* The Demod/Tuner can't easily provide these, we cache them */ -struct cx24116_tuning -{ +struct cx24116_tuning { u32 frequency; u32 symbol_rate; fe_spectral_inversion_t inversion; @@ -158,16 +164,14 @@ struct cx24116_tuning }; /* Basic commands that are sent to the firmware */ -struct cx24116_cmd -{ +struct cx24116_cmd { u8 len; u8 args[CX24116_ARGLEN]; }; -struct cx24116_state -{ - struct i2c_adapter* i2c; - const struct cx24116_config* config; +struct cx24116_state { + struct i2c_adapter *i2c; + const struct cx24116_config *config; struct dvb_frontend frontend; @@ -179,18 +183,19 @@ struct cx24116_state struct cx24116_cmd dsec_cmd; }; -static int cx24116_writereg(struct cx24116_state* state, int reg, int data) +static int cx24116_writereg(struct cx24116_state *state, int reg, int data) { u8 buf[] = { reg, data }; struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; int err; - if (debug>1) + if (debug > 1) printk("cx24116: %s: write reg 0x%02x, value 0x%02x\n", - __func__,reg, data); + __func__, reg, data); - if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { + err = i2c_transfer(state->i2c, &msg, 1); + if (err != 1) { printk("%s: writereg error(err == %i, reg == 0x%02x," " value == 0x%02x)\n", __func__, err, reg, data); return -EREMOTEIO; @@ -200,7 +205,8 @@ static int cx24116_writereg(struct cx24116_state* state, int reg, int data) } /* Bulk byte writes to a single I2C address, for 32k firmware load */ -static int cx24116_writeregN(struct cx24116_state* state, int reg, u8 *data, u16 len) +static int cx24116_writeregN(struct cx24116_state *state, int reg, + u8 *data, u16 len) { int ret = -EREMOTEIO; struct i2c_msg msg; @@ -221,11 +227,12 @@ static int cx24116_writeregN(struct cx24116_state* state, int reg, u8 *data, u16 msg.buf = buf; msg.len = len + 1; - if (debug>1) + if (debug > 1) printk("cx24116: %s: write regN 0x%02x, len = %d\n", - __func__,reg, len); + __func__, reg, len); - if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1) { + ret = i2c_transfer(state->i2c, &msg, 1); + if (ret != 1) { printk("%s: writereg error(err == %i, reg == 0x%02x\n", __func__, ret, reg); ret = -EREMOTEIO; @@ -237,14 +244,16 @@ error: return ret; } -static int cx24116_readreg(struct cx24116_state* state, u8 reg) +static int cx24116_readreg(struct cx24116_state *state, u8 reg) { int ret; u8 b0[] = { reg }; u8 b1[] = { 0 }; struct i2c_msg msg[] = { - { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 }, - { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } + { .addr = state->config->demod_address, .flags = 0, + .buf = b0, .len = 1 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, + .buf = b1, .len = 1 } }; ret = i2c_transfer(state->i2c, msg, 2); @@ -254,13 +263,14 @@ static int cx24116_readreg(struct cx24116_state* state, u8 reg) return ret; } - if (debug>1) - printk("cx24116: read reg 0x%02x, value 0x%02x\n",reg, b1[0]); + if (debug > 1) + printk("cx24116: read reg 0x%02x, value 0x%02x\n", + reg, b1[0]); return b1[0]; } -static int cx24116_set_inversion(struct cx24116_state* state, fe_spectral_inversion_t inversion) +static int cx24116_set_inversion(struct cx24116_state *state, fe_spectral_inversion_t inversion) { dprintk("%s(%d)\n", __func__, inversion); @@ -389,18 +399,16 @@ struct cx24116_modfec { */ }; -static int cx24116_lookup_fecmod(struct cx24116_state* state, +static int cx24116_lookup_fecmod(struct cx24116_state *state, fe_modulation_t m, fe_code_rate_t f) { int i, ret = -EOPNOTSUPP; dprintk("%s(0x%02x,0x%02x)\n", __func__, m, f); - for(i=0 ; i < sizeof(CX24116_MODFEC_MODES) / sizeof(struct cx24116_modfec) ; i++) - { - if( (m == CX24116_MODFEC_MODES[i].modulation) && - (f == CX24116_MODFEC_MODES[i].fec) ) - { + for (i = 0; i < ARRAY_SIZE(CX24116_MODFEC_MODES); i++) { + if ((m == CX24116_MODFEC_MODES[i].modulation) && + (f == CX24116_MODFEC_MODES[i].fec)) { ret = i; break; } @@ -409,7 +417,7 @@ static int cx24116_lookup_fecmod(struct cx24116_state* state, return ret; } -static int cx24116_set_fec(struct cx24116_state* state, fe_modulation_t mod, fe_code_rate_t fec) +static int cx24116_set_fec(struct cx24116_state *state, fe_modulation_t mod, fe_code_rate_t fec) { int ret = 0; @@ -417,7 +425,7 @@ static int cx24116_set_fec(struct cx24116_state* state, fe_modulation_t mod, fe_ ret = cx24116_lookup_fecmod(state, mod, fec); - if(ret < 0) + if (ret < 0) return ret; state->dnxt.fec = fec; @@ -429,7 +437,7 @@ static int cx24116_set_fec(struct cx24116_state* state, fe_modulation_t mod, fe_ return 0; } -static int cx24116_set_symbolrate(struct cx24116_state* state, u32 rate) +static int cx24116_set_symbolrate(struct cx24116_state *state, u32 rate) { dprintk("%s(%d)\n", __func__, rate); @@ -446,18 +454,18 @@ static int cx24116_set_symbolrate(struct cx24116_state* state, u32 rate) return 0; } -static int cx24116_load_firmware (struct dvb_frontend* fe, const struct firmware *fw); +static int cx24116_load_firmware(struct dvb_frontend *fe, + const struct firmware *fw); -static int cx24116_firmware_ondemand(struct dvb_frontend* fe) +static int cx24116_firmware_ondemand(struct dvb_frontend *fe) { struct cx24116_state *state = fe->demodulator_priv; const struct firmware *fw; int ret = 0; - dprintk("%s()\n",__func__); + dprintk("%s()\n", __func__); - if (cx24116_readreg(state, 0x20) > 0) - { + if (cx24116_readreg(state, 0x20) > 0) { if (state->skip_fw_load) return 0; @@ -491,7 +499,7 @@ static int cx24116_firmware_ondemand(struct dvb_frontend* fe) } /* Take a basic firmware command structure, format it and forward it for processing */ -static int cx24116_cmd_execute(struct dvb_frontend* fe, struct cx24116_cmd *cmd) +static int cx24116_cmd_execute(struct dvb_frontend *fe, struct cx24116_cmd *cmd) { struct cx24116_state *state = fe->demodulator_priv; int i, ret; @@ -499,26 +507,23 @@ static int cx24116_cmd_execute(struct dvb_frontend* fe, struct cx24116_cmd *cmd) dprintk("%s()\n", __func__); /* Load the firmware if required */ - if ( (ret = cx24116_firmware_ondemand(fe)) != 0) - { + ret = cx24116_firmware_ondemand(fe); + if (ret != 0) { printk("%s(): Unable initialise the firmware\n", __func__); return ret; } /* Write the command */ - for(i = 0; i < cmd->len ; i++) - { + for (i = 0; i < cmd->len ; i++) { dprintk("%s: 0x%02x == 0x%02x\n", __func__, i, cmd->args[i]); cx24116_writereg(state, i, cmd->args[i]); } /* Start execution and wait for cmd to terminate */ cx24116_writereg(state, CX24116_REG_EXECUTE, 0x01); - while( cx24116_readreg(state, CX24116_REG_EXECUTE) ) - { + while (cx24116_readreg(state, CX24116_REG_EXECUTE)) { msleep(10); - if(i++ > 64) - { + if (i++ > 64) { /* Avoid looping forever if the firmware does no respond */ printk("%s() Firmware not responding\n", __func__); return -EREMOTEIO; @@ -527,21 +532,21 @@ static int cx24116_cmd_execute(struct dvb_frontend* fe, struct cx24116_cmd *cmd) return 0; } -static int cx24116_load_firmware (struct dvb_frontend* fe, const struct firmware *fw) +static int cx24116_load_firmware(struct dvb_frontend *fe, + const struct firmware *fw) { - struct cx24116_state* state = fe->demodulator_priv; + struct cx24116_state *state = fe->demodulator_priv; struct cx24116_cmd cmd; int i, ret; unsigned char vers[4]; dprintk("%s\n", __func__); - dprintk("Firmware is %zu bytes (%02x %02x .. %02x %02x)\n" - ,fw->size - ,fw->data[0] - ,fw->data[1] - ,fw->data[ fw->size-2 ] - ,fw->data[ fw->size-1 ] - ); + dprintk("Firmware is %zu bytes (%02x %02x .. %02x %02x)\n", + fw->size, + fw->data[0], + fw->data[1], + fw->data[fw->size-2], + fw->data[fw->size-1]); /* Toggle 88x SRST pin to reset demod */ if (state->config->reset_device) @@ -587,7 +592,7 @@ static int cx24116_load_firmware (struct dvb_frontend* fe, const struct firmware cmd.args[0x07] = 0x9d; cmd.args[0x08] = 0xfc; cmd.args[0x09] = 0x06; - cmd.len= 0x0a; + cmd.len = 0x0a; ret = cx24116_cmd_execute(fe, &cmd); if (ret != 0) return ret; @@ -598,7 +603,7 @@ static int cx24116_load_firmware (struct dvb_frontend* fe, const struct firmware cmd.args[0x00] = CMD_TUNERINIT; cmd.args[0x01] = 0x00; cmd.args[0x02] = 0x00; - cmd.len= 0x03; + cmd.len = 0x03; ret = cx24116_cmd_execute(fe, &cmd); if (ret != 0) return ret; @@ -615,20 +620,20 @@ static int cx24116_load_firmware (struct dvb_frontend* fe, const struct firmware else cmd.args[0x04] = 0x02; cmd.args[0x05] = 0x00; - cmd.len= 0x06; + cmd.len = 0x06; ret = cx24116_cmd_execute(fe, &cmd); if (ret != 0) return ret; /* Firmware CMD 35: Get firmware version */ cmd.args[0x00] = CMD_UPDFWVERS; - cmd.len= 0x02; - for(i=0; i<4; i++) { + cmd.len = 0x02; + for (i = 0; i < 4; i++) { cmd.args[0x01] = i; ret = cx24116_cmd_execute(fe, &cmd); if (ret != 0) return ret; - vers[i]= cx24116_readreg(state, CX24116_REG_MAILBOX); + vers[i] = cx24116_readreg(state, CX24116_REG_MAILBOX); } printk("%s: FW version %i.%i.%i.%i\n", __func__, vers[0], vers[1], vers[2], vers[3]); @@ -636,15 +641,17 @@ static int cx24116_load_firmware (struct dvb_frontend* fe, const struct firmware return 0; } -static int cx24116_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) +static int cx24116_set_voltage(struct dvb_frontend *fe, + fe_sec_voltage_t voltage) { /* The isl6421 module will override this function in the fops. */ - dprintk("%s() This should never appear if the isl6421 module is loaded correctly\n",__func__); + dprintk("%s() This should never appear if the isl6421 module " + "is loaded correctly\n", __func__); return -EOPNOTSUPP; } -static int cx24116_read_status(struct dvb_frontend* fe, fe_status_t* status) +static int cx24116_read_status(struct dvb_frontend *fe, fe_status_t *status) { struct cx24116_state *state = fe->demodulator_priv; @@ -666,22 +673,23 @@ static int cx24116_read_status(struct dvb_frontend* fe, fe_status_t* status) return 0; } -static int cx24116_read_ber(struct dvb_frontend* fe, u32* ber) +static int cx24116_read_ber(struct dvb_frontend *fe, u32 *ber) { struct cx24116_state *state = fe->demodulator_priv; dprintk("%s()\n", __func__); - *ber = ( cx24116_readreg(state, CX24116_REG_BER24) << 24 ) | - ( cx24116_readreg(state, CX24116_REG_BER16) << 16 ) | - ( cx24116_readreg(state, CX24116_REG_BER8 ) << 8 ) | - cx24116_readreg(state, CX24116_REG_BER0 ); + *ber = (cx24116_readreg(state, CX24116_REG_BER24) << 24) | + (cx24116_readreg(state, CX24116_REG_BER16) << 16) | + (cx24116_readreg(state, CX24116_REG_BER8) << 8) | + cx24116_readreg(state, CX24116_REG_BER0); return 0; } /* TODO Determine function and scale appropriately */ -static int cx24116_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength) +static int cx24116_read_signal_strength(struct dvb_frontend *fe, + u16 *signal_strength) { struct cx24116_state *state = fe->demodulator_priv; struct cx24116_cmd cmd; @@ -692,39 +700,43 @@ static int cx24116_read_signal_strength(struct dvb_frontend* fe, u16* signal_str /* Firmware CMD 19: Get AGC */ cmd.args[0x00] = CMD_GETAGC; - cmd.len= 0x01; + cmd.len = 0x01; ret = cx24116_cmd_execute(fe, &cmd); if (ret != 0) return ret; - sig_reading = ( cx24116_readreg(state, CX24116_REG_SSTATUS) & CX24116_SIGNAL_MASK ) | - ( cx24116_readreg(state, CX24116_REG_SIGNAL) << 6 ); - *signal_strength= 0 - sig_reading; + sig_reading = + (cx24116_readreg(state, + CX24116_REG_SSTATUS) & CX24116_SIGNAL_MASK) | + (cx24116_readreg(state, CX24116_REG_SIGNAL) << 6); + *signal_strength = 0 - sig_reading; - dprintk("%s: raw / cooked = 0x%04x / 0x%04x\n", __func__, sig_reading, *signal_strength); + dprintk("%s: raw / cooked = 0x%04x / 0x%04x\n", + __func__, sig_reading, *signal_strength); return 0; } /* SNR (0..100)% = (sig & 0xf0) * 10 + (sig & 0x0f) * 10 / 16 */ -static int cx24116_read_snr_pct(struct dvb_frontend* fe, u16* snr) +static int cx24116_read_snr_pct(struct dvb_frontend *fe, u16 *snr) { struct cx24116_state *state = fe->demodulator_priv; u8 snr_reading; static const u32 snr_tab[] = { /* 10 x Table (rounded up) */ - 0x00000,0x0199A,0x03333,0x04ccD,0x06667, - 0x08000,0x0999A,0x0b333,0x0cccD,0x0e667, - 0x10000,0x1199A,0x13333,0x14ccD,0x16667,0x18000 }; + 0x00000, 0x0199A, 0x03333, 0x04ccD, 0x06667, + 0x08000, 0x0999A, 0x0b333, 0x0cccD, 0x0e667, + 0x10000, 0x1199A, 0x13333, 0x14ccD, 0x16667, + 0x18000 }; dprintk("%s()\n", __func__); snr_reading = cx24116_readreg(state, CX24116_REG_QUALITY0); - if(snr_reading >= 0xa0 /* 100% */) + if (snr_reading >= 0xa0 /* 100% */) *snr = 0xffff; else - *snr = snr_tab [ ( snr_reading & 0xf0 ) >> 4 ] + - ( snr_tab [ ( snr_reading & 0x0f ) ] >> 4 ); + *snr = snr_tab[(snr_reading & 0xf0) >> 4] + + (snr_tab[(snr_reading & 0x0f)] >> 4); dprintk("%s: raw / cooked = 0x%02x / 0x%04x\n", __func__, snr_reading, *snr); @@ -736,7 +748,7 @@ static int cx24116_read_snr_pct(struct dvb_frontend* fe, u16* snr) * ESNO, from 0->30db (values 0->300). We provide this value by * default. */ -static int cx24116_read_snr_esno(struct dvb_frontend* fe, u16* snr) +static int cx24116_read_snr_esno(struct dvb_frontend *fe, u16 *snr) { struct cx24116_state *state = fe->demodulator_priv; @@ -750,7 +762,7 @@ static int cx24116_read_snr_esno(struct dvb_frontend* fe, u16* snr) return 0; } -static int cx24116_read_snr(struct dvb_frontend* fe, u16* snr) +static int cx24116_read_snr(struct dvb_frontend *fe, u16 *snr) { if (esno_snr == 1) return cx24116_read_snr_esno(fe, snr); @@ -758,27 +770,27 @@ static int cx24116_read_snr(struct dvb_frontend* fe, u16* snr) return cx24116_read_snr_pct(fe, snr); } -static int cx24116_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +static int cx24116_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) { struct cx24116_state *state = fe->demodulator_priv; dprintk("%s()\n", __func__); - *ucblocks = ( cx24116_readreg(state, CX24116_REG_UCB8) << 8 ) | + *ucblocks = (cx24116_readreg(state, CX24116_REG_UCB8) << 8) | cx24116_readreg(state, CX24116_REG_UCB0); return 0; } /* Overwrite the current tuning params, we are about to tune */ -static void cx24116_clone_params(struct dvb_frontend* fe) +static void cx24116_clone_params(struct dvb_frontend *fe) { struct cx24116_state *state = fe->demodulator_priv; memcpy(&state->dcur, &state->dnxt, sizeof(state->dcur)); } /* Wait for LNB */ -static int cx24116_wait_for_lnb(struct dvb_frontend* fe) +static int cx24116_wait_for_lnb(struct dvb_frontend *fe) { struct cx24116_state *state = fe->demodulator_priv; int i; @@ -787,7 +799,7 @@ static int cx24116_wait_for_lnb(struct dvb_frontend* fe) cx24116_readreg(state, CX24116_REG_QSTATUS)); /* Wait for up to 300 ms */ - for(i = 0; i < 30 ; i++) { + for (i = 0; i < 30 ; i++) { if (cx24116_readreg(state, CX24116_REG_QSTATUS) & 0x20) return 0; msleep(10); @@ -798,20 +810,21 @@ static int cx24116_wait_for_lnb(struct dvb_frontend* fe) return -ETIMEDOUT; /* -EBUSY ? */ } -static int cx24116_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) +static int cx24116_set_tone(struct dvb_frontend *fe, + fe_sec_tone_mode_t tone) { struct cx24116_cmd cmd; int ret; dprintk("%s(%d)\n", __func__, tone); - if ( (tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF) ) { + if ((tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF)) { printk("%s: Invalid, tone=%d\n", __func__, tone); return -EINVAL; } /* Wait for LNB ready */ ret = cx24116_wait_for_lnb(fe); - if(ret != 0) + if (ret != 0) return ret; /* Min delay time after DiSEqC send */ @@ -820,7 +833,7 @@ static int cx24116_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) /* This is always done before the tone is set */ cmd.args[0x00] = CMD_SET_TONEPRE; cmd.args[0x01] = 0x00; - cmd.len= 0x02; + cmd.len = 0x02; ret = cx24116_cmd_execute(fe, &cmd); if (ret != 0) return ret; @@ -836,11 +849,11 @@ static int cx24116_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) cmd.args[0x03] = 0x01; break; case SEC_TONE_OFF: - dprintk("%s: setting tone off\n",__func__); + dprintk("%s: setting tone off\n", __func__); cmd.args[0x03] = 0x00; break; } - cmd.len= 0x04; + cmd.len = 0x04; /* Min delay time before DiSEqC send */ msleep(15); /* XXX determine is FW does this, see send_diseqc/burst */ @@ -849,7 +862,7 @@ static int cx24116_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) } /* Initialise DiSEqC */ -static int cx24116_diseqc_init(struct dvb_frontend* fe) +static int cx24116_diseqc_init(struct dvb_frontend *fe) { struct cx24116_state *state = fe->demodulator_priv; struct cx24116_cmd cmd; @@ -864,7 +877,7 @@ static int cx24116_diseqc_init(struct dvb_frontend* fe) cmd.args[0x05] = 0x28; cmd.args[0x06] = (toneburst == CX24116_DISEQC_TONEOFF) ? 0x00 : 0x01; cmd.args[0x07] = 0x01; - cmd.len= 0x08; + cmd.len = 0x08; ret = cx24116_cmd_execute(fe, &cmd); if (ret != 0) return ret; @@ -884,13 +897,14 @@ static int cx24116_diseqc_init(struct dvb_frontend* fe) state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] = 0x00; /* Command length */ - state->dsec_cmd.len= CX24116_DISEQC_MSGOFS; + state->dsec_cmd.len = CX24116_DISEQC_MSGOFS; return 0; } /* Send DiSEqC message with derived burst (hack) || previous burst */ -static int cx24116_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *d) +static int cx24116_send_diseqc_msg(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *d) { struct cx24116_state *state = fe->demodulator_priv; int i, ret; @@ -898,16 +912,16 @@ static int cx24116_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_ma /* Dump DiSEqC message */ if (debug) { printk("cx24116: %s(", __func__); - for(i = 0 ; i < d->msg_len ;) { + for (i = 0 ; i < d->msg_len ;) { printk("0x%02x", d->msg[i]); - if(++i < d->msg_len) + if (++i < d->msg_len) printk(", "); - } + } printk(") toneburst=%d\n", toneburst); } /* Validate length */ - if(d->msg_len > (CX24116_ARGLEN - CX24116_DISEQC_MSGOFS)) + if (d->msg_len > (CX24116_ARGLEN - CX24116_DISEQC_MSGOFS)) return -EINVAL; /* DiSEqC message */ @@ -918,18 +932,19 @@ static int cx24116_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_ma state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] = d->msg_len; /* Command length */ - state->dsec_cmd.len= CX24116_DISEQC_MSGOFS + state->dsec_cmd.args[CX24116_DISEQC_MSGLEN]; + state->dsec_cmd.len = CX24116_DISEQC_MSGOFS + + state->dsec_cmd.args[CX24116_DISEQC_MSGLEN]; /* DiSEqC toneburst */ - if(toneburst == CX24116_DISEQC_MESGCACHE) + if (toneburst == CX24116_DISEQC_MESGCACHE) /* Message is cached */ return 0; - else if(toneburst == CX24116_DISEQC_TONEOFF) + else if (toneburst == CX24116_DISEQC_TONEOFF) /* Message is sent without burst */ state->dsec_cmd.args[CX24116_DISEQC_BURST] = 0; - else if(toneburst == CX24116_DISEQC_TONECACHE) { + else if (toneburst == CX24116_DISEQC_TONECACHE) { /* * Message is sent with derived else cached burst * @@ -948,15 +963,17 @@ static int cx24116_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_ma * Y = VOLTAGE (0=13V, 1=18V) * Z = BAND (0=LOW, 1=HIGH(22K)) */ - if(d->msg_len >= 4 && d->msg[2] == 0x38) - state->dsec_cmd.args[CX24116_DISEQC_BURST] = ((d->msg[3] & 4) >> 2); - if(debug) - dprintk("%s burst=%d\n", __func__, state->dsec_cmd.args[CX24116_DISEQC_BURST]); + if (d->msg_len >= 4 && d->msg[2] == 0x38) + state->dsec_cmd.args[CX24116_DISEQC_BURST] = + ((d->msg[3] & 4) >> 2); + if (debug) + dprintk("%s burst=%d\n", __func__, + state->dsec_cmd.args[CX24116_DISEQC_BURST]); } /* Wait for LNB ready */ ret = cx24116_wait_for_lnb(fe); - if(ret != 0) + if (ret != 0) return ret; /* Wait for voltage/min repeat delay */ @@ -964,7 +981,7 @@ static int cx24116_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_ma /* Command */ ret = cx24116_cmd_execute(fe, &state->dsec_cmd); - if(ret != 0) + if (ret != 0) return ret; /* * Wait for send @@ -976,29 +993,33 @@ static int cx24116_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_ma * 12.5ms burst + * >15ms delay (XXX determine if FW does this, see set_tone) */ - msleep( (state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] << 4) + ((toneburst == CX24116_DISEQC_TONEOFF) ? 30 : 60) ); + msleep((state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] << 4) + + ((toneburst == CX24116_DISEQC_TONEOFF) ? 30 : 60)); return 0; } /* Send DiSEqC burst */ -static int cx24116_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t burst) +static int cx24116_diseqc_send_burst(struct dvb_frontend *fe, + fe_sec_mini_cmd_t burst) { struct cx24116_state *state = fe->demodulator_priv; int ret; - dprintk("%s(%d) toneburst=%d\n",__func__, burst, toneburst); + dprintk("%s(%d) toneburst=%d\n", __func__, burst, toneburst); /* DiSEqC burst */ if (burst == SEC_MINI_A) - state->dsec_cmd.args[CX24116_DISEQC_BURST] = CX24116_DISEQC_MINI_A; - else if(burst == SEC_MINI_B) - state->dsec_cmd.args[CX24116_DISEQC_BURST] = CX24116_DISEQC_MINI_B; + state->dsec_cmd.args[CX24116_DISEQC_BURST] = + CX24116_DISEQC_MINI_A; + else if (burst == SEC_MINI_B) + state->dsec_cmd.args[CX24116_DISEQC_BURST] = + CX24116_DISEQC_MINI_B; else return -EINVAL; /* DiSEqC toneburst */ - if(toneburst != CX24116_DISEQC_MESGCACHE) + if (toneburst != CX24116_DISEQC_MESGCACHE) /* Burst is cached */ return 0; @@ -1006,7 +1027,7 @@ static int cx24116_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t /* Wait for LNB ready */ ret = cx24116_wait_for_lnb(fe); - if(ret != 0) + if (ret != 0) return ret; /* Wait for voltage/min repeat delay */ @@ -1014,7 +1035,7 @@ static int cx24116_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t /* Command */ ret = cx24116_cmd_execute(fe, &state->dsec_cmd); - if(ret != 0) + if (ret != 0) return ret; /* @@ -1027,27 +1048,27 @@ static int cx24116_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t * 12.5ms burst + * >15ms delay (XXX determine if FW does this, see set_tone) */ - msleep( (state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] << 4) + 60 ); + msleep((state->dsec_cmd.args[CX24116_DISEQC_MSGLEN] << 4) + 60); return 0; } -static void cx24116_release(struct dvb_frontend* fe) +static void cx24116_release(struct dvb_frontend *fe) { - struct cx24116_state* state = fe->demodulator_priv; - dprintk("%s\n",__func__); + struct cx24116_state *state = fe->demodulator_priv; + dprintk("%s\n", __func__); kfree(state); } static struct dvb_frontend_ops cx24116_ops; -struct dvb_frontend* cx24116_attach(const struct cx24116_config* config, - struct i2c_adapter* i2c) +struct dvb_frontend *cx24116_attach(const struct cx24116_config *config, + struct i2c_adapter *i2c) { - struct cx24116_state* state = NULL; + struct cx24116_state *state = NULL; int ret; - dprintk("%s\n",__func__); + dprintk("%s\n", __func__); /* allocate memory for the internal state */ state = kmalloc(sizeof(struct cx24116_state), GFP_KERNEL); @@ -1077,18 +1098,20 @@ struct dvb_frontend* cx24116_attach(const struct cx24116_config* config, error2: kfree(state); error1: return NULL; } +EXPORT_SYMBOL(cx24116_attach); + /* * Initialise or wake up device * * Power config will reset and load initial firmware if required */ -static int cx24116_initfe(struct dvb_frontend* fe) +static int cx24116_initfe(struct dvb_frontend *fe) { - struct cx24116_state* state = fe->demodulator_priv; + struct cx24116_state *state = fe->demodulator_priv; struct cx24116_cmd cmd; int ret; - dprintk("%s()\n",__func__); + dprintk("%s()\n", __func__); /* Power on */ cx24116_writereg(state, 0xe0, 0); @@ -1098,9 +1121,9 @@ static int cx24116_initfe(struct dvb_frontend* fe) /* Firmware CMD 36: Power config */ cmd.args[0x00] = CMD_TUNERSLEEP; cmd.args[0x01] = 0; - cmd.len= 0x02; + cmd.len = 0x02; ret = cx24116_cmd_execute(fe, &cmd); - if(ret != 0) + if (ret != 0) return ret; return cx24116_diseqc_init(fe); @@ -1109,20 +1132,20 @@ static int cx24116_initfe(struct dvb_frontend* fe) /* * Put device to sleep */ -static int cx24116_sleep(struct dvb_frontend* fe) +static int cx24116_sleep(struct dvb_frontend *fe) { - struct cx24116_state* state = fe->demodulator_priv; + struct cx24116_state *state = fe->demodulator_priv; struct cx24116_cmd cmd; int ret; - dprintk("%s()\n",__func__); + dprintk("%s()\n", __func__); /* Firmware CMD 36: Power config */ cmd.args[0x00] = CMD_TUNERSLEEP; cmd.args[0x01] = 1; - cmd.len= 0x02; + cmd.len = 0x02; ret = cx24116_cmd_execute(fe, &cmd); - if(ret != 0) + if (ret != 0) return ret; /* Power off (Shutdown clocks) */ @@ -1133,13 +1156,15 @@ static int cx24116_sleep(struct dvb_frontend* fe) return 0; } -static int cx24116_set_property(struct dvb_frontend *fe, struct dtv_property* tvp) +static int cx24116_set_property(struct dvb_frontend *fe, + struct dtv_property *tvp) { dprintk("%s(..)\n", __func__); return 0; } -static int cx24116_get_property(struct dvb_frontend *fe, struct dtv_property* tvp) +static int cx24116_get_property(struct dvb_frontend *fe, + struct dtv_property *tvp) { dprintk("%s(..)\n", __func__); return 0; @@ -1148,7 +1173,8 @@ static int cx24116_get_property(struct dvb_frontend *fe, struct dtv_property* tv /* dvb-core told us to tune, the tv property cache will be complete, * it's safe for is to pull values and use them for tuning purposes. */ -static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) +static int cx24116_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) { struct cx24116_state *state = fe->demodulator_priv; struct dtv_frontend_properties *c = &fe->dtv_property_cache; @@ -1156,96 +1182,99 @@ static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par fe_status_t tunerstat; int i, status, ret, retune; - dprintk("%s()\n",__func__); + dprintk("%s()\n", __func__); - switch(c->delivery_system) { - case SYS_DVBS: - dprintk("%s: DVB-S delivery system selected\n",__func__); + switch (c->delivery_system) { + case SYS_DVBS: + dprintk("%s: DVB-S delivery system selected\n", __func__); - /* Only QPSK is supported for DVB-S */ - if(c->modulation != QPSK) { - dprintk("%s: unsupported modulation selected (%d)\n", - __func__, c->modulation); - return -EOPNOTSUPP; - } + /* Only QPSK is supported for DVB-S */ + if (c->modulation != QPSK) { + dprintk("%s: unsupported modulation selected (%d)\n", + __func__, c->modulation); + return -EOPNOTSUPP; + } - /* Pilot doesn't exist in DVB-S, turn bit off */ - state->dnxt.pilot_val = CX24116_PILOT_OFF; - retune = 1; + /* Pilot doesn't exist in DVB-S, turn bit off */ + state->dnxt.pilot_val = CX24116_PILOT_OFF; + retune = 1; - /* DVB-S only supports 0.35 */ - if(c->rolloff != ROLLOFF_35) { - dprintk("%s: unsupported rolloff selected (%d)\n", - __func__, c->rolloff); - return -EOPNOTSUPP; - } - state->dnxt.rolloff_val = CX24116_ROLLOFF_035; - break; + /* DVB-S only supports 0.35 */ + if (c->rolloff != ROLLOFF_35) { + dprintk("%s: unsupported rolloff selected (%d)\n", + __func__, c->rolloff); + return -EOPNOTSUPP; + } + state->dnxt.rolloff_val = CX24116_ROLLOFF_035; + break; - case SYS_DVBS2: - dprintk("%s: DVB-S2 delivery system selected\n",__func__); - - /* - * NBC 8PSK/QPSK with DVB-S is supported for DVB-S2, - * but not hardware auto detection - */ - if(c->modulation != PSK_8 && c->modulation != QPSK) { - dprintk("%s: unsupported modulation selected (%d)\n", - __func__, c->modulation); - return -EOPNOTSUPP; - } + case SYS_DVBS2: + dprintk("%s: DVB-S2 delivery system selected\n", __func__); - switch(c->pilot) { - case PILOT_AUTO: /* Not supported but emulated */ - retune = 2; /* Fall-through */ - case PILOT_OFF: - state->dnxt.pilot_val = CX24116_PILOT_OFF; - break; - case PILOT_ON: - state->dnxt.pilot_val = CX24116_PILOT_ON; - break; - default: - dprintk("%s: unsupported pilot mode selected (%d)\n", - __func__, c->pilot); - return -EOPNOTSUPP; - } + /* + * NBC 8PSK/QPSK with DVB-S is supported for DVB-S2, + * but not hardware auto detection + */ + if (c->modulation != PSK_8 && c->modulation != QPSK) { + dprintk("%s: unsupported modulation selected (%d)\n", + __func__, c->modulation); + return -EOPNOTSUPP; + } - switch(c->rolloff) { - case ROLLOFF_20: - state->dnxt.rolloff_val= CX24116_ROLLOFF_020; - break; - case ROLLOFF_25: - state->dnxt.rolloff_val= CX24116_ROLLOFF_025; - break; - case ROLLOFF_35: - state->dnxt.rolloff_val= CX24116_ROLLOFF_035; - break; - case ROLLOFF_AUTO: /* Rolloff must be explicit */ - default: - dprintk("%s: unsupported rolloff selected (%d)\n", - __func__, c->rolloff); - return -EOPNOTSUPP; - } + switch (c->pilot) { + case PILOT_AUTO: /* Not supported but emulated */ + retune = 2; /* Fall-through */ + case PILOT_OFF: + state->dnxt.pilot_val = CX24116_PILOT_OFF; + break; + case PILOT_ON: + state->dnxt.pilot_val = CX24116_PILOT_ON; break; + default: + dprintk("%s: unsupported pilot mode selected (%d)\n", + __func__, c->pilot); + return -EOPNOTSUPP; + } + switch (c->rolloff) { + case ROLLOFF_20: + state->dnxt.rolloff_val = CX24116_ROLLOFF_020; + break; + case ROLLOFF_25: + state->dnxt.rolloff_val = CX24116_ROLLOFF_025; + break; + case ROLLOFF_35: + state->dnxt.rolloff_val = CX24116_ROLLOFF_035; + break; + case ROLLOFF_AUTO: /* Rolloff must be explicit */ default: - dprintk("%s: unsupported delivery system selected (%d)\n", - __func__, c->delivery_system); + dprintk("%s: unsupported rolloff selected (%d)\n", + __func__, c->rolloff); return -EOPNOTSUPP; + } + break; + + default: + dprintk("%s: unsupported delivery system selected (%d)\n", + __func__, c->delivery_system); + return -EOPNOTSUPP; } state->dnxt.modulation = c->modulation; state->dnxt.frequency = c->frequency; state->dnxt.pilot = c->pilot; state->dnxt.rolloff = c->rolloff; - if ((ret = cx24116_set_inversion(state, c->inversion)) != 0) + ret = cx24116_set_inversion(state, c->inversion); + if (ret != 0) return ret; /* FEC_NONE/AUTO for DVB-S2 is not supported and detected here */ - if ((ret = cx24116_set_fec(state, c->modulation, c->fec_inner)) != 0) + ret = cx24116_set_fec(state, c->modulation, c->fec_inner); + if (ret != 0) return ret; - if ((ret = cx24116_set_symbolrate(state, c->symbol_rate)) != 0) + ret = cx24116_set_symbolrate(state, c->symbol_rate); + if (ret != 0) return ret; /* discard the 'current' tuning parameters and prepare to tune */ @@ -1271,7 +1300,7 @@ static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par /* Set/Reset B/W */ cmd.args[0x00] = CMD_BANDWIDTH; cmd.args[0x01] = 0x01; - cmd.len= 0x02; + cmd.len = 0x02; ret = cx24116_cmd_execute(fe, &cmd); if (ret != 0) return ret; @@ -1319,7 +1348,7 @@ static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par cx24116_writereg(state, CX24116_REG_RATEDIV, 0x00); } - cmd.len= 0x13; + cmd.len = 0x13; /* We need to support pilot and non-pilot tuning in the * driver automatically. This is a workaround for because @@ -1327,12 +1356,13 @@ static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par */ do { /* Reset status register */ - status = cx24116_readreg(state, CX24116_REG_SSTATUS) & CX24116_SIGNAL_MASK; + status = cx24116_readreg(state, CX24116_REG_SSTATUS) + & CX24116_SIGNAL_MASK; cx24116_writereg(state, CX24116_REG_SSTATUS, status); /* Tune */ ret = cx24116_cmd_execute(fe, &cmd); - if( ret != 0 ) + if (ret != 0) break; /* @@ -1341,28 +1371,27 @@ static int cx24116_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par * If we are able to tune then generally it occurs within 100ms. * If it takes longer, try a different toneburst setting. */ - for(i = 0; i < 50 ; i++) { + for (i = 0; i < 50 ; i++) { cx24116_read_status(fe, &tunerstat); status = tunerstat & (FE_HAS_SIGNAL | FE_HAS_SYNC); - if(status == (FE_HAS_SIGNAL | FE_HAS_SYNC)) { - dprintk("%s: Tuned\n",__func__); + if (status == (FE_HAS_SIGNAL | FE_HAS_SYNC)) { + dprintk("%s: Tuned\n", __func__); goto tuned; } msleep(10); } - dprintk("%s: Not tuned\n",__func__); + dprintk("%s: Not tuned\n", __func__); /* Toggle pilot bit when in auto-pilot */ - if(state->dcur.pilot == PILOT_AUTO) + if (state->dcur.pilot == PILOT_AUTO) cmd.args[0x07] ^= CX24116_PILOT_ON; - } - while(--retune); + } while (--retune); tuned: /* Set/Reset B/W */ cmd.args[0x00] = CMD_BANDWIDTH; cmd.args[0x01] = 0x00; - cmd.len= 0x02; + cmd.len = 0x02; ret = cx24116_cmd_execute(fe, &cmd); if (ret != 0) return ret; @@ -1407,17 +1436,7 @@ static struct dvb_frontend_ops cx24116_ops = { .set_frontend = cx24116_set_frontend, }; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)"); - -module_param(toneburst, int, 0644); -MODULE_PARM_DESC(toneburst, "DiSEqC toneburst 0=OFF, 1=TONE CACHE, 2=MESSAGE CACHE (default:1)"); - -module_param(esno_snr, int, 0644); -MODULE_PARM_DESC(debug, "SNR return units, 0=PERCENTAGE 0-100, 1=ESNO(db * 10) (default:0)"); - MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24116/cx24118 hardware"); MODULE_AUTHOR("Steven Toth"); MODULE_LICENSE("GPL"); -EXPORT_SYMBOL(cx24116_attach); |