Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux

Pulled mainline in order to get the UAPI infrastructure already
merged before I pull in David Howells's UAPI trees for networking.

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 1368 insertions, 0 deletions

diff --git a/drivers/media/pci/saa7134/saa7134-core.c b/drivers/media/pci/saa7134/saa7134-core.c
new file mode 100644
index 0000000..f2b37e0
--- /dev/null
+++ b/drivers/media/pci/saa7134/saa7134-core.c
@@ -0,0 +1,1368 @@
+/*
+ *
+ * device driver for philips saa7134 based TV cards
+ * driver core
+ *
+ * (c) 2001-03 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/kmod.h>
+#include <linux/sound.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/dma-mapping.h>
+#include <linux/pm.h>
+
+#include "saa7134-reg.h"
+#include "saa7134.h"
+
+MODULE_DESCRIPTION("v4l2 driver module for saa7130/34 based TV cards");
+MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(SAA7134_VERSION);
+
+
+/* ------------------------------------------------------------------ */
+
+static unsigned int irq_debug;
+module_param(irq_debug, int, 0644);
+MODULE_PARM_DESC(irq_debug,"enable debug messages [IRQ handler]");
+
+static unsigned int core_debug;
+module_param(core_debug, int, 0644);
+MODULE_PARM_DESC(core_debug,"enable debug messages [core]");
+
+static unsigned int gpio_tracking;
+module_param(gpio_tracking, int, 0644);
+MODULE_PARM_DESC(gpio_tracking,"enable debug messages [gpio]");
+
+static unsigned int alsa = 1;
+module_param(alsa, int, 0644);
+MODULE_PARM_DESC(alsa,"enable/disable ALSA DMA sound [dmasound]");
+
+static unsigned int latency = UNSET;
+module_param(latency, int, 0444);
+MODULE_PARM_DESC(latency,"pci latency timer");
+
+int saa7134_no_overlay=-1;
+module_param_named(no_overlay, saa7134_no_overlay, int, 0444);
+MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
+		" [some VIA/SIS chipsets are known to have problem with overlay]");
+
+static unsigned int video_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
+static unsigned int vbi_nr[]   = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
+static unsigned int radio_nr[] = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
+static unsigned int tuner[]    = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
+static unsigned int card[]     = {[0 ... (SAA7134_MAXBOARDS - 1)] = UNSET };
+
+
+module_param_array(video_nr, int, NULL, 0444);
+module_param_array(vbi_nr,   int, NULL, 0444);
+module_param_array(radio_nr, int, NULL, 0444);
+module_param_array(tuner,    int, NULL, 0444);
+module_param_array(card,     int, NULL, 0444);
+
+MODULE_PARM_DESC(video_nr, "video device number");
+MODULE_PARM_DESC(vbi_nr,   "vbi device number");
+MODULE_PARM_DESC(radio_nr, "radio device number");
+MODULE_PARM_DESC(tuner,    "tuner type");
+MODULE_PARM_DESC(card,     "card type");
+
+DEFINE_MUTEX(saa7134_devlist_lock);
+EXPORT_SYMBOL(saa7134_devlist_lock);
+LIST_HEAD(saa7134_devlist);
+EXPORT_SYMBOL(saa7134_devlist);
+static LIST_HEAD(mops_list);
+static unsigned int saa7134_devcount;
+
+int (*saa7134_dmasound_init)(struct saa7134_dev *dev);
+int (*saa7134_dmasound_exit)(struct saa7134_dev *dev);
+
+#define dprintk(fmt, arg...)	if (core_debug) \
+	printk(KERN_DEBUG "%s/core: " fmt, dev->name , ## arg)
+
+void saa7134_track_gpio(struct saa7134_dev *dev, char *msg)
+{
+	unsigned long mode,status;
+
+	if (!gpio_tracking)
+		return;
+	/* rising SAA7134_GPIO_GPRESCAN reads the status */
+	saa_andorb(SAA7134_GPIO_GPMODE3,SAA7134_GPIO_GPRESCAN,0);
+	saa_andorb(SAA7134_GPIO_GPMODE3,SAA7134_GPIO_GPRESCAN,SAA7134_GPIO_GPRESCAN);
+	mode   = saa_readl(SAA7134_GPIO_GPMODE0   >> 2) & 0xfffffff;
+	status = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2) & 0xfffffff;
+	printk(KERN_DEBUG
+	       "%s: gpio: mode=0x%07lx in=0x%07lx out=0x%07lx [%s]\n",
+	       dev->name, mode, (~mode) & status, mode & status, msg);
+}
+
+void saa7134_set_gpio(struct saa7134_dev *dev, int bit_no, int value)
+{
+	u32 index, bitval;
+
+	index = 1 << bit_no;
+	switch (value) {
+	case 0: /* static value */
+	case 1:	dprintk("setting GPIO%d to static %d\n", bit_no, value);
+		/* turn sync mode off if necessary */
+		if (index & 0x00c00000)
+			saa_andorb(SAA7134_VIDEO_PORT_CTRL6, 0x0f, 0x00);
+		if (value)
+			bitval = index;
+		else
+			bitval = 0;
+		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, index, index);
+		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, index, bitval);
+		break;
+	case 3:	/* tristate */
+		dprintk("setting GPIO%d to tristate\n", bit_no);
+		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, index, 0);
+		break;
+	}
+}
+
+/* ------------------------------------------------------------------ */
+
+
+/* ----------------------------------------------------------- */
+/* delayed request_module                                      */
+
+#if defined(CONFIG_MODULES) && defined(MODULE)
+
+static void request_module_async(struct work_struct *work){
+	struct saa7134_dev* dev = container_of(work, struct saa7134_dev, request_module_wk);
+	if (card_is_empress(dev))
+		request_module("saa7134-empress");
+	if (card_is_dvb(dev))
+		request_module("saa7134-dvb");
+	if (alsa) {
+		if (dev->pci->device != PCI_DEVICE_ID_PHILIPS_SAA7130)
+			request_module("saa7134-alsa");
+	}
+}
+
+static void request_submodules(struct saa7134_dev *dev)
+{
+	INIT_WORK(&dev->request_module_wk, request_module_async);
+	schedule_work(&dev->request_module_wk);
+}
+
+static void flush_request_submodules(struct saa7134_dev *dev)
+{
+	flush_work(&dev->request_module_wk);
+}
+
+#else
+#define request_submodules(dev)
+#define flush_request_submodules(dev)
+#endif /* CONFIG_MODULES */
+
+/* ------------------------------------------------------------------ */
+
+/* nr of (saa7134-)pages for the given buffer size */
+static int saa7134_buffer_pages(int size)
+{
+	size  = PAGE_ALIGN(size);
+	size += PAGE_SIZE; /* for non-page-aligned buffers */
+	size /= 4096;
+	return size;
+}
+
+/* calc max # of buffers from size (must not exceed the 4MB virtual
+ * address space per DMA channel) */
+int saa7134_buffer_count(unsigned int size, unsigned int count)
+{
+	unsigned int maxcount;
+
+	maxcount = 1024 / saa7134_buffer_pages(size);
+	if (count > maxcount)
+		count = maxcount;
+	return count;
+}
+
+int saa7134_buffer_startpage(struct saa7134_buf *buf)
+{
+	return saa7134_buffer_pages(buf->vb.bsize) * buf->vb.i;
+}
+
+unsigned long saa7134_buffer_base(struct saa7134_buf *buf)
+{
+	unsigned long base;
+	struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
+
+	base  = saa7134_buffer_startpage(buf) * 4096;
+	base += dma->sglist[0].offset;
+	return base;
+}
+
+/* ------------------------------------------------------------------ */
+
+int saa7134_pgtable_alloc(struct pci_dev *pci, struct saa7134_pgtable *pt)
+{
+	__le32       *cpu;
+	dma_addr_t   dma_addr = 0;
+
+	cpu = pci_alloc_consistent(pci, SAA7134_PGTABLE_SIZE, &dma_addr);
+	if (NULL == cpu)
+		return -ENOMEM;
+	pt->size = SAA7134_PGTABLE_SIZE;
+	pt->cpu  = cpu;
+	pt->dma  = dma_addr;
+	return 0;
+}
+
+int saa7134_pgtable_build(struct pci_dev *pci, struct saa7134_pgtable *pt,
+			  struct scatterlist *list, unsigned int length,
+			  unsigned int startpage)
+{
+	__le32        *ptr;
+	unsigned int  i,p;
+
+	BUG_ON(NULL == pt || NULL == pt->cpu);
+
+	ptr = pt->cpu + startpage;
+	for (i = 0; i < length; i++, list++)
+		for (p = 0; p * 4096 < list->length; p++, ptr++)
+			*ptr = cpu_to_le32(sg_dma_address(list) - list->offset);
+	return 0;
+}
+
+void saa7134_pgtable_free(struct pci_dev *pci, struct saa7134_pgtable *pt)
+{
+	if (NULL == pt->cpu)
+		return;
+	pci_free_consistent(pci, pt->size, pt->cpu, pt->dma);
+	pt->cpu = NULL;
+}
+
+/* ------------------------------------------------------------------ */
+
+void saa7134_dma_free(struct videobuf_queue *q,struct saa7134_buf *buf)
+{
+	struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
+	BUG_ON(in_interrupt());
+
+	videobuf_waiton(q, &buf->vb, 0, 0);
+	videobuf_dma_unmap(q->dev, dma);
+	videobuf_dma_free(dma);
+	buf->vb.state = VIDEOBUF_NEEDS_INIT;
+}
+
+/* ------------------------------------------------------------------ */
+
+int saa7134_buffer_queue(struct saa7134_dev *dev,
+			 struct saa7134_dmaqueue *q,
+			 struct saa7134_buf *buf)
+{
+	struct saa7134_buf *next = NULL;
+
+	assert_spin_locked(&dev->slock);
+	dprintk("buffer_queue %p\n",buf);
+	if (NULL == q->curr) {
+		if (!q->need_two) {
+			q->curr = buf;
+			buf->activate(dev,buf,NULL);
+		} else if (list_empty(&q->queue)) {
+			list_add_tail(&buf->vb.queue,&q->queue);
+			buf->vb.state = VIDEOBUF_QUEUED;
+		} else {
+			next = list_entry(q->queue.next,struct saa7134_buf,
+					  vb.queue);
+			q->curr = buf;
+			buf->activate(dev,buf,next);
+		}
+	} else {
+		list_add_tail(&buf->vb.queue,&q->queue);
+		buf->vb.state = VIDEOBUF_QUEUED;
+	}
+	return 0;
+}
+
+void saa7134_buffer_finish(struct saa7134_dev *dev,
+			   struct saa7134_dmaqueue *q,
+			   unsigned int state)
+{
+	assert_spin_locked(&dev->slock);
+	dprintk("buffer_finish %p\n",q->curr);
+
+	/* finish current buffer */
+	q->curr->vb.state = state;
+	do_gettimeofday(&q->curr->vb.ts);
+	wake_up(&q->curr->vb.done);
+	q->curr = NULL;
+}
+
+void saa7134_buffer_next(struct saa7134_dev *dev,
+			 struct saa7134_dmaqueue *q)
+{
+	struct saa7134_buf *buf,*next = NULL;
+
+	assert_spin_locked(&dev->slock);
+	BUG_ON(NULL != q->curr);
+
+	if (!list_empty(&q->queue)) {
+		/* activate next one from queue */
+		buf = list_entry(q->queue.next,struct saa7134_buf,vb.queue);
+		dprintk("buffer_next %p [prev=%p/next=%p]\n",
+			buf,q->queue.prev,q->queue.next);
+		list_del(&buf->vb.queue);
+		if (!list_empty(&q->queue))
+			next = list_entry(q->queue.next,struct saa7134_buf,
+					  vb.queue);
+		q->curr = buf;
+		buf->activate(dev,buf,next);
+		dprintk("buffer_next #2 prev=%p/next=%p\n",
+			q->queue.prev,q->queue.next);
+	} else {
+		/* nothing to do -- just stop DMA */
+		dprintk("buffer_next %p\n",NULL);
+		saa7134_set_dmabits(dev);
+		del_timer(&q->timeout);
+
+		if (card_has_mpeg(dev))
+			if (dev->ts_started)
+				saa7134_ts_stop(dev);
+	}
+}
+
+void saa7134_buffer_timeout(unsigned long data)
+{
+	struct saa7134_dmaqueue *q = (struct saa7134_dmaqueue*)data;
+	struct saa7134_dev *dev = q->dev;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->slock,flags);
+
+	/* try to reset the hardware (SWRST) */
+	saa_writeb(SAA7134_REGION_ENABLE, 0x00);
+	saa_writeb(SAA7134_REGION_ENABLE, 0x80);
+	saa_writeb(SAA7134_REGION_ENABLE, 0x00);
+
+	/* flag current buffer as failed,
+	   try to start over with the next one. */
+	if (q->curr) {
+		dprintk("timeout on %p\n",q->curr);
+		saa7134_buffer_finish(dev,q,VIDEOBUF_ERROR);
+	}
+	saa7134_buffer_next(dev,q);
+	spin_unlock_irqrestore(&dev->slock,flags);
+}
+
+/* ------------------------------------------------------------------ */
+
+int saa7134_set_dmabits(struct saa7134_dev *dev)
+{
+	u32 split, task=0, ctrl=0, irq=0;
+	enum v4l2_field cap = V4L2_FIELD_ANY;
+	enum v4l2_field ov  = V4L2_FIELD_ANY;
+
+	assert_spin_locked(&dev->slock);
+
+	if (dev->insuspend)
+		return 0;
+
+	/* video capture -- dma 0 + video task A */
+	if (dev->video_q.curr) {
+		task |= 0x01;
+		ctrl |= SAA7134_MAIN_CTRL_TE0;
+		irq  |= SAA7134_IRQ1_INTE_RA0_1 |
+			SAA7134_IRQ1_INTE_RA0_0;
+		cap = dev->video_q.curr->vb.field;
+	}
+
+	/* video capture -- dma 1+2 (planar modes) */
+	if (dev->video_q.curr &&
+	    dev->video_q.curr->fmt->planar) {
+		ctrl |= SAA7134_MAIN_CTRL_TE4 |
+			SAA7134_MAIN_CTRL_TE5;
+	}
+
+	/* screen overlay -- dma 0 + video task B */
+	if (dev->ovenable) {
+		task |= 0x10;
+		ctrl |= SAA7134_MAIN_CTRL_TE1;
+		ov = dev->ovfield;
+	}
+
+	/* vbi capture -- dma 0 + vbi task A+B */
+	if (dev->vbi_q.curr) {
+		task |= 0x22;
+		ctrl |= SAA7134_MAIN_CTRL_TE2 |
+			SAA7134_MAIN_CTRL_TE3;
+		irq  |= SAA7134_IRQ1_INTE_RA0_7 |
+			SAA7134_IRQ1_INTE_RA0_6 |
+			SAA7134_IRQ1_INTE_RA0_5 |
+			SAA7134_IRQ1_INTE_RA0_4;
+	}
+
+	/* audio capture -- dma 3 */
+	if (dev->dmasound.dma_running) {
+		ctrl |= SAA7134_MAIN_CTRL_TE6;
+		irq  |= SAA7134_IRQ1_INTE_RA3_1 |
+			SAA7134_IRQ1_INTE_RA3_0;
+	}
+
+	/* TS capture -- dma 5 */
+	if (dev->ts_q.curr) {
+		ctrl |= SAA7134_MAIN_CTRL_TE5;
+		irq  |= SAA7134_IRQ1_INTE_RA2_1 |
+			SAA7134_IRQ1_INTE_RA2_0;
+	}
+
+	/* set task conditions + field handling */
+	if (V4L2_FIELD_HAS_BOTH(cap) || V4L2_FIELD_HAS_BOTH(ov) || cap == ov) {
+		/* default config -- use full frames */
+		saa_writeb(SAA7134_TASK_CONDITIONS(TASK_A), 0x0d);
+		saa_writeb(SAA7134_TASK_CONDITIONS(TASK_B), 0x0d);
+		saa_writeb(SAA7134_FIELD_HANDLING(TASK_A),  0x02);
+		saa_writeb(SAA7134_FIELD_HANDLING(TASK_B),  0x02);
+		split = 0;
+	} else {
+		/* split fields between tasks */
+		if (V4L2_FIELD_TOP == cap) {
+			/* odd A, even B, repeat */
+			saa_writeb(SAA7134_TASK_CONDITIONS(TASK_A), 0x0d);
+			saa_writeb(SAA7134_TASK_CONDITIONS(TASK_B), 0x0e);
+		} else {
+			/* odd B, even A, repeat */
+			saa_writeb(SAA7134_TASK_CONDITIONS(TASK_A), 0x0e);
+			saa_writeb(SAA7134_TASK_CONDITIONS(TASK_B), 0x0d);
+		}
+		saa_writeb(SAA7134_FIELD_HANDLING(TASK_A),  0x01);
+		saa_writeb(SAA7134_FIELD_HANDLING(TASK_B),  0x01);
+		split = 1;
+	}
+
+	/* irqs */
+	saa_writeb(SAA7134_REGION_ENABLE, task);
+	saa_writel(SAA7134_IRQ1,          irq);
+	saa_andorl(SAA7134_MAIN_CTRL,
+		   SAA7134_MAIN_CTRL_TE0 |
+		   SAA7134_MAIN_CTRL_TE1 |
+		   SAA7134_MAIN_CTRL_TE2 |
+		   SAA7134_MAIN_CTRL_TE3 |
+		   SAA7134_MAIN_CTRL_TE4 |
+		   SAA7134_MAIN_CTRL_TE5 |
+		   SAA7134_MAIN_CTRL_TE6,
+		   ctrl);
+	dprintk("dmabits: task=0x%02x ctrl=0x%02x irq=0x%x split=%s\n",
+		task, ctrl, irq, split ? "no" : "yes");
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------ */
+/* IRQ handler + helpers                                              */
+
+static char *irqbits[] = {
+	"DONE_RA0", "DONE_RA1", "DONE_RA2", "DONE_RA3",
+	"AR", "PE", "PWR_ON", "RDCAP", "INTL", "FIDT", "MMC",
+	"TRIG_ERR", "CONF_ERR", "LOAD_ERR",
+	"GPIO16", "GPIO18", "GPIO22", "GPIO23"
+};
+#define IRQBITS ARRAY_SIZE(irqbits)
+
+static void print_irqstatus(struct saa7134_dev *dev, int loop,
+			    unsigned long report, unsigned long status)
+{
+	unsigned int i;
+
+	printk(KERN_DEBUG "%s/irq[%d,%ld]: r=0x%lx s=0x%02lx",
+	       dev->name,loop,jiffies,report,status);
+	for (i = 0; i < IRQBITS; i++) {
+		if (!(report & (1 << i)))
+			continue;
+		printk(" %s",irqbits[i]);
+	}
+	if (report & SAA7134_IRQ_REPORT_DONE_RA0) {
+		printk(" | RA0=%s,%s,%s,%ld",
+		       (status & 0x40) ? "vbi"  : "video",
+		       (status & 0x20) ? "b"    : "a",
+		       (status & 0x10) ? "odd"  : "even",
+		       (status & 0x0f));
+	}
+	printk("\n");
+}
+
+static irqreturn_t saa7134_irq(int irq, void *dev_id)
+{
+	struct saa7134_dev *dev = (struct saa7134_dev*) dev_id;
+	unsigned long report,status;
+	int loop, handled = 0;
+
+	if (dev->insuspend)
+		goto out;
+
+	for (loop = 0; loop < 10; loop++) {
+		report = saa_readl(SAA7134_IRQ_REPORT);
+		status = saa_readl(SAA7134_IRQ_STATUS);
+
+		/* If dmasound support is active and we get a sound report,
+		 * mask out the report and let the saa7134-alsa module deal
+		 * with it */
+		if ((report & SAA7134_IRQ_REPORT_DONE_RA3) &&
+			(dev->dmasound.priv_data != NULL) )
+		{
+			if (irq_debug > 1)
+				printk(KERN_DEBUG "%s/irq: preserving DMA sound interrupt\n",
+				       dev->name);
+			report &= ~SAA7134_IRQ_REPORT_DONE_RA3;
+		}
+
+		if (0 == report) {
+			if (irq_debug > 1)
+				printk(KERN_DEBUG "%s/irq: no (more) work\n",
+				       dev->name);
+			goto out;
+		}
+
+		handled = 1;
+		saa_writel(SAA7134_IRQ_REPORT,report);
+		if (irq_debug)
+			print_irqstatus(dev,loop,report,status);
+
+
+		if ((report & SAA7134_IRQ_REPORT_RDCAP) ||
+			(report & SAA7134_IRQ_REPORT_INTL))
+				saa7134_irq_video_signalchange(dev);
+
+
+		if ((report & SAA7134_IRQ_REPORT_DONE_RA0) &&
+		    (status & 0x60) == 0)
+			saa7134_irq_video_done(dev,status);
+
+		if ((report & SAA7134_IRQ_REPORT_DONE_RA0) &&
+		    (status & 0x40) == 0x40)
+			saa7134_irq_vbi_done(dev,status);
+
+		if ((report & SAA7134_IRQ_REPORT_DONE_RA2) &&
+		    card_has_mpeg(dev))
+			saa7134_irq_ts_done(dev,status);
+
+		if (report & SAA7134_IRQ_REPORT_GPIO16) {
+			switch (dev->has_remote) {
+				case SAA7134_REMOTE_GPIO:
+					if (!dev->remote)
+						break;
+					if  (dev->remote->mask_keydown & 0x10000) {
+						saa7134_input_irq(dev);
+					}
+					break;
+
+				case SAA7134_REMOTE_I2C:
+					break;			/* FIXME: invoke I2C get_key() */
+
+				default:			/* GPIO16 not used by IR remote */
+					break;
+			}
+		}
+
+		if (report & SAA7134_IRQ_REPORT_GPIO18) {
+			switch (dev->has_remote) {
+				case SAA7134_REMOTE_GPIO:
+					if (!dev->remote)
+						break;
+					if ((dev->remote->mask_keydown & 0x40000) ||
+					    (dev->remote->mask_keyup & 0x40000)) {
+						saa7134_input_irq(dev);
+					}
+					break;
+
+				case SAA7134_REMOTE_I2C:
+					break;			/* FIXME: invoke I2C get_key() */
+
+				default:			/* GPIO18 not used by IR remote */
+					break;
+			}
+		}
+	}
+
+	if (10 == loop) {
+		print_irqstatus(dev,loop,report,status);
+		if (report & SAA7134_IRQ_REPORT_PE) {
+			/* disable all parity error */
+			printk(KERN_WARNING "%s/irq: looping -- "
+			       "clearing PE (parity error!) enable bit\n",dev->name);
+			saa_clearl(SAA7134_IRQ2,SAA7134_IRQ2_INTE_PE);
+		} else if (report & SAA7134_IRQ_REPORT_GPIO16) {
+			/* disable gpio16 IRQ */
+			printk(KERN_WARNING "%s/irq: looping -- "
+			       "clearing GPIO16 enable bit\n",dev->name);
+			saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO16_P);
+			saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO16_N);
+		} else if (report & SAA7134_IRQ_REPORT_GPIO18) {
+			/* disable gpio18 IRQs */
+			printk(KERN_WARNING "%s/irq: looping -- "
+			       "clearing GPIO18 enable bit\n",dev->name);
+			saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_P);
+			saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_N);
+		} else {
+			/* disable all irqs */
+			printk(KERN_WARNING "%s/irq: looping -- "
+			       "clearing all enable bits\n",dev->name);
+			saa_writel(SAA7134_IRQ1,0);
+			saa_writel(SAA7134_IRQ2,0);
+		}
+	}
+
+ out:
+	return IRQ_RETVAL(handled);
+}
+
+/* ------------------------------------------------------------------ */
+
+/* early init (no i2c, no irq) */
+
+static int saa7134_hw_enable1(struct saa7134_dev *dev)
+{
+	/* RAM FIFO config */
+	saa_writel(SAA7134_FIFO_SIZE, 0x08070503);
+	saa_writel(SAA7134_THRESHOULD, 0x02020202);
+
+	/* enable audio + video processing */
+	saa_writel(SAA7134_MAIN_CTRL,
+			SAA7134_MAIN_CTRL_VPLLE |
+			SAA7134_MAIN_CTRL_APLLE |
+			SAA7134_MAIN_CTRL_EXOSC |
+			SAA7134_MAIN_CTRL_EVFE1 |
+			SAA7134_MAIN_CTRL_EVFE2 |
+			SAA7134_MAIN_CTRL_ESFE  |
+			SAA7134_MAIN_CTRL_EBDAC);
+
+	/*
+	* Initialize OSS _after_ enabling audio clock PLL and audio processing.
+	* OSS initialization writes to registers via the audio DSP; these
+	* writes will fail unless the audio clock has been started.  At worst,
+	* audio will not work.
+	*/
+
+	/* enable peripheral devices */
+	saa_writeb(SAA7134_SPECIAL_MODE, 0x01);
+
+	/* set vertical line numbering start (vbi needs this) */
+	saa_writeb(SAA7134_SOURCE_TIMING2, 0x20);
+
+	return 0;
+}
+
+static int saa7134_hwinit1(struct saa7134_dev *dev)
+{
+	dprintk("hwinit1\n");
+
+	saa_writel(SAA7134_IRQ1, 0);
+	saa_writel(SAA7134_IRQ2, 0);
+
+	/* Clear any stale IRQ reports */
+	saa_writel(SAA7134_IRQ_REPORT, saa_readl(SAA7134_IRQ_REPORT));
+
+	mutex_init(&dev->lock);
+	spin_lock_init(&dev->slock);
+
+	saa7134_track_gpio(dev,"pre-init");
+	saa7134_video_init1(dev);
+	saa7134_vbi_init1(dev);
+	if (card_has_mpeg(dev))
+		saa7134_ts_init1(dev);
+	saa7134_input_init1(dev);
+
+	saa7134_hw_enable1(dev);
+
+	return 0;
+}
+
+/* late init (with i2c + irq) */
+static int saa7134_hw_enable2(struct saa7134_dev *dev)
+{
+
+	unsigned int irq2_mask;
+
+	/* enable IRQ's */
+	irq2_mask =
+		SAA7134_IRQ2_INTE_DEC3    |
+		SAA7134_IRQ2_INTE_DEC2    |
+		SAA7134_IRQ2_INTE_DEC1    |
+		SAA7134_IRQ2_INTE_DEC0    |
+		SAA7134_IRQ2_INTE_PE      |
+		SAA7134_IRQ2_INTE_AR;
+
+	if (dev->has_remote == SAA7134_REMOTE_GPIO && dev->remote) {
+		if (dev->remote->mask_keydown & 0x10000)
+			irq2_mask |= SAA7134_IRQ2_INTE_GPIO16_N;
+		else {		/* Allow enabling both IRQ edge triggers */
+			if (dev->remote->mask_keydown & 0x40000)
+				irq2_mask |= SAA7134_IRQ2_INTE_GPIO18_P;
+			if (dev->remote->mask_keyup & 0x40000)
+				irq2_mask |= SAA7134_IRQ2_INTE_GPIO18_N;
+		}
+	}
+
+	if (dev->has_remote == SAA7134_REMOTE_I2C) {
+		request_module("ir-kbd-i2c");
+	}
+
+	saa_writel(SAA7134_IRQ1, 0);
+	saa_writel(SAA7134_IRQ2, irq2_mask);
+
+	return 0;
+}
+
+static int saa7134_hwinit2(struct saa7134_dev *dev)
+{
+
+	dprintk("hwinit2\n");
+
+	saa7134_video_init2(dev);
+	saa7134_tvaudio_init2(dev);
+
+	saa7134_hw_enable2(dev);
+
+	return 0;
+}
+
+
+/* shutdown */
+static int saa7134_hwfini(struct saa7134_dev *dev)
+{
+	dprintk("hwfini\n");
+
+	if (card_has_mpeg(dev))
+		saa7134_ts_fini(dev);
+	saa7134_input_fini(dev);
+	saa7134_vbi_fini(dev);
+	saa7134_tvaudio_fini(dev);
+	return 0;
+}
+
+static void __devinit must_configure_manually(int has_eeprom)
+{
+	unsigned int i,p;
+
+	if (!has_eeprom)
+		printk(KERN_WARNING
+		       "saa7134: <rant>\n"
+		       "saa7134:  Congratulations!  Your TV card vendor saved a few\n"
+		       "saa7134:  cents for a eeprom, thus your pci board has no\n"
+		       "saa7134:  subsystem ID and I can't identify it automatically\n"
+		       "saa7134: </rant>\n"
+		       "saa7134: I feel better now.  Ok, here are the good news:\n"
+		       "saa7134: You can use the card=<nr> insmod option to specify\n"
+		       "saa7134: which board do you have.  The list:\n");
+	else
+		printk(KERN_WARNING
+		       "saa7134: Board is currently unknown. You might try to use the card=<nr>\n"
+		       "saa7134: insmod option to specify which board do you have, but this is\n"
+		       "saa7134: somewhat risky, as might damage your card. It is better to ask\n"
+		       "saa7134: for support at linux-media@vger.kernel.org.\n"
+		       "saa7134: The supported cards are:\n");
+
+	for (i = 0; i < saa7134_bcount; i++) {
+		printk(KERN_WARNING "saa7134:   card=%d -> %-40.40s",
+		       i,saa7134_boards[i].name);
+		for (p = 0; saa7134_pci_tbl[p].driver_data; p++) {
+			if (saa7134_pci_tbl[p].driver_data != i)
+				continue;
+			printk(" %04x:%04x",
+			       saa7134_pci_tbl[p].subvendor,
+			       saa7134_pci_tbl[p].subdevice);
+		}
+		printk("\n");
+	}
+}
+
+static struct video_device *vdev_init(struct saa7134_dev *dev,
+				      struct video_device *template,
+				      char *type)
+{
+	struct video_device *vfd;
+
+	vfd = video_device_alloc();
+	if (NULL == vfd)
+		return NULL;
+	*vfd = *template;
+	vfd->v4l2_dev  = &dev->v4l2_dev;
+	vfd->release = video_device_release;
+	vfd->debug   = video_debug;
+	snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)",
+		 dev->name, type, saa7134_boards[dev->board].name);
+	video_set_drvdata(vfd, dev);
+	return vfd;
+}
+
+static void saa7134_unregister_video(struct saa7134_dev *dev)
+{
+	if (dev->video_dev) {
+		if (video_is_registered(dev->video_dev))
+			video_unregister_device(dev->video_dev);
+		else
+			video_device_release(dev->video_dev);
+		dev->video_dev = NULL;
+	}
+	if (dev->vbi_dev) {
+		if (video_is_registered(dev->vbi_dev))
+			video_unregister_device(dev->vbi_dev);
+		else
+			video_device_release(dev->vbi_dev);
+		dev->vbi_dev = NULL;
+	}
+	if (dev->radio_dev) {
+		if (video_is_registered(dev->radio_dev))
+			video_unregister_device(dev->radio_dev);
+		else
+			video_device_release(dev->radio_dev);
+		dev->radio_dev = NULL;
+	}
+}
+
+static void mpeg_ops_attach(struct saa7134_mpeg_ops *ops,
+			    struct saa7134_dev *dev)
+{
+	int err;
+
+	if (NULL != dev->mops)
+		return;
+	if (saa7134_boards[dev->board].mpeg != ops->type)
+		return;
+	err = ops->init(dev);
+	if (0 != err)
+		return;
+	dev->mops = ops;
+}
+
+static void mpeg_ops_detach(struct saa7134_mpeg_ops *ops,
+			    struct saa7134_dev *dev)
+{
+	if (NULL == dev->mops)
+		return;
+	if (dev->mops != ops)
+		return;
+	dev->mops->fini(dev);
+	dev->mops = NULL;
+}
+
+static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
+				     const struct pci_device_id *pci_id)
+{
+	struct saa7134_dev *dev;
+	struct saa7134_mpeg_ops *mops;
+	int err;
+
+	if (saa7134_devcount == SAA7134_MAXBOARDS)
+		return -ENOMEM;
+
+	dev = kzalloc(sizeof(*dev),GFP_KERNEL);
+	if (NULL == dev)
+		return -ENOMEM;
+
+	err = v4l2_device_register(&pci_dev->dev, &dev->v4l2_dev);
+	if (err)
+		goto fail0;
+
+	/* pci init */
+	dev->pci = pci_dev;
+	if (pci_enable_device(pci_dev)) {
+		err = -EIO;
+		goto fail1;
+	}
+
+	dev->nr = saa7134_devcount;
+	sprintf(dev->name,"saa%x[%d]",pci_dev->device,dev->nr);
+
+	/* pci quirks */
+	if (pci_pci_problems) {
+		if (pci_pci_problems & PCIPCI_TRITON)
+			printk(KERN_INFO "%s: quirk: PCIPCI_TRITON\n", dev->name);
+		if (pci_pci_problems & PCIPCI_NATOMA)
+			printk(KERN_INFO "%s: quirk: PCIPCI_NATOMA\n", dev->name);
+		if (pci_pci_problems & PCIPCI_VIAETBF)
+			printk(KERN_INFO "%s: quirk: PCIPCI_VIAETBF\n", dev->name);
+		if (pci_pci_problems & PCIPCI_VSFX)
+			printk(KERN_INFO "%s: quirk: PCIPCI_VSFX\n",dev->name);
+#ifdef PCIPCI_ALIMAGIK
+		if (pci_pci_problems & PCIPCI_ALIMAGIK) {
+			printk(KERN_INFO "%s: quirk: PCIPCI_ALIMAGIK -- latency fixup\n",
+			       dev->name);
+			latency = 0x0A;
+		}
+#endif
+		if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) {
+			printk(KERN_INFO "%s: quirk: this driver and your "
+					"chipset may not work together"
+					" in overlay mode.\n",dev->name);
+			if (!saa7134_no_overlay) {
+				printk(KERN_INFO "%s: quirk: overlay "
+						"mode will be disabled.\n",
+						dev->name);
+				saa7134_no_overlay = 1;
+			} else {
+				printk(KERN_INFO "%s: quirk: overlay "
+						"mode will be forced. Use this"
+						" option at your own risk.\n",
+						dev->name);
+			}
+		}
+	}
+	if (UNSET != latency) {
+		printk(KERN_INFO "%s: setting pci latency timer to %d\n",
+		       dev->name,latency);
+		pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, latency);
+	}
+
+	/* print pci info */
+	dev->pci_rev = pci_dev->revision;
+	pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER,  &dev->pci_lat);
+	printk(KERN_INFO "%s: found at %s, rev: %d, irq: %d, "
+	       "latency: %d, mmio: 0x%llx\n", dev->name,
+	       pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
+	       dev->pci_lat,(unsigned long long)pci_resource_start(pci_dev,0));
+	pci_set_master(pci_dev);
+	if (!pci_dma_supported(pci_dev, DMA_BIT_MASK(32))) {
+		printk("%s: Oops: no 32bit PCI DMA ???\n",dev->name);
+		err = -EIO;
+		goto fail1;
+	}
+
+	/* board config */
+	dev->board = pci_id->driver_data;
+	if (card[dev->nr] >= 0 &&
+	    card[dev->nr] < saa7134_bcount)
+		dev->board = card[dev->nr];
+	if (SAA7134_BOARD_UNKNOWN == dev->board)
+		must_configure_manually(0);
+	else if (SAA7134_BOARD_NOAUTO == dev->board) {
+		must_configure_manually(1);
+		dev->board = SAA7134_BOARD_UNKNOWN;
+	}
+	dev->autodetected = card[dev->nr] != dev->board;
+	dev->tuner_type = saa7134_boards[dev->board].tuner_type;
+	dev->tuner_addr = saa7134_boards[dev->board].tuner_addr;
+	dev->radio_type = saa7134_boards[dev->board].radio_type;
+	dev->radio_addr = saa7134_boards[dev->board].radio_addr;
+	dev->tda9887_conf = saa7134_boards[dev->board].tda9887_conf;
+	if (UNSET != tuner[dev->nr])
+		dev->tuner_type = tuner[dev->nr];
+	printk(KERN_INFO "%s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n",
+		dev->name,pci_dev->subsystem_vendor,
+		pci_dev->subsystem_device,saa7134_boards[dev->board].name,
+		dev->board, dev->autodetected ?
+		"autodetected" : "insmod option");
+
+	/* get mmio */
+	if (!request_mem_region(pci_resource_start(pci_dev,0),
+				pci_resource_len(pci_dev,0),
+				dev->name)) {
+		err = -EBUSY;
+		printk(KERN_ERR "%s: can't get MMIO memory @ 0x%llx\n",
+		       dev->name,(unsigned long long)pci_resource_start(pci_dev,0));
+		goto fail1;
+	}
+	dev->lmmio = ioremap(pci_resource_start(pci_dev, 0),
+			     pci_resource_len(pci_dev, 0));
+	dev->bmmio = (__u8 __iomem *)dev->lmmio;
+	if (NULL == dev->lmmio) {
+		err = -EIO;
+		printk(KERN_ERR "%s: can't ioremap() MMIO memory\n",
+		       dev->name);
+		goto fail2;
+	}
+
+	/* initialize hardware #1 */
+	saa7134_board_init1(dev);
+	saa7134_hwinit1(dev);
+
+	/* get irq */
+	err = request_irq(pci_dev->irq, saa7134_irq,
+			  IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
+	if (err < 0) {
+		printk(KERN_ERR "%s: can't get IRQ %d\n",
+		       dev->name,pci_dev->irq);
+		goto fail3;
+	}
+
+	/* wait a bit, register i2c bus */
+	msleep(100);
+	saa7134_i2c_register(dev);
+	saa7134_board_init2(dev);
+
+	saa7134_hwinit2(dev);
+
+	/* load i2c helpers */
+	if (card_is_empress(dev)) {
+		struct v4l2_subdev *sd =
+			v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+				"saa6752hs",
+				saa7134_boards[dev->board].empress_addr, NULL);
+
+		if (sd)
+			sd->grp_id = GRP_EMPRESS;
+	}
+
+	if (saa7134_boards[dev->board].rds_addr) {
+		struct v4l2_subdev *sd;
+
+		sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
+				&dev->i2c_adap, "saa6588",
+				0, I2C_ADDRS(saa7134_boards[dev->board].rds_addr));
+		if (sd) {
+			printk(KERN_INFO "%s: found RDS decoder\n", dev->name);
+			dev->has_rds = 1;
+		}
+	}
+
+	v4l2_prio_init(&dev->prio);
+
+	mutex_lock(&saa7134_devlist_lock);
+	list_for_each_entry(mops, &mops_list, next)
+		mpeg_ops_attach(mops, dev);
+	list_add_tail(&dev->devlist, &saa7134_devlist);
+	mutex_unlock(&saa7134_devlist_lock);
+
+	/* check for signal */
+	saa7134_irq_video_signalchange(dev);
+
+	if (TUNER_ABSENT != dev->tuner_type)
+		saa_call_all(dev, core, s_power, 0);
+
+	/* register v4l devices */
+	if (saa7134_no_overlay > 0)
+		printk(KERN_INFO "%s: Overlay support disabled.\n", dev->name);
+
+	dev->video_dev = vdev_init(dev,&saa7134_video_template,"video");
+	err = video_register_device(dev->video_dev,VFL_TYPE_GRABBER,
+				    video_nr[dev->nr]);
+	if (err < 0) {
+		printk(KERN_INFO "%s: can't register video device\n",
+		       dev->name);
+		goto fail4;
+	}
+	printk(KERN_INFO "%s: registered device %s [v4l2]\n",
+	       dev->name, video_device_node_name(dev->video_dev));
+
+	dev->vbi_dev = vdev_init(dev, &saa7134_video_template, "vbi");
+
+	err = video_register_device(dev->vbi_dev,VFL_TYPE_VBI,
+				    vbi_nr[dev->nr]);
+	if (err < 0)
+		goto fail4;
+	printk(KERN_INFO "%s: registered device %s\n",
+	       dev->name, video_device_node_name(dev->vbi_dev));
+
+	if (card_has_radio(dev)) {
+		dev->radio_dev = vdev_init(dev,&saa7134_radio_template,"radio");
+		err = video_register_device(dev->radio_dev,VFL_TYPE_RADIO,
+					    radio_nr[dev->nr]);
+		if (err < 0)
+			goto fail4;
+		printk(KERN_INFO "%s: registered device %s\n",
+		       dev->name, video_device_node_name(dev->radio_dev));
+	}
+
+	/* everything worked */
+	saa7134_devcount++;
+
+	if (saa7134_dmasound_init && !dev->dmasound.priv_data)
+		saa7134_dmasound_init(dev);
+
+	request_submodules(dev);
+	return 0;
+
+ fail4:
+	saa7134_unregister_video(dev);
+	saa7134_i2c_unregister(dev);
+	free_irq(pci_dev->irq, dev);
+ fail3:
+	saa7134_hwfini(dev);
+	iounmap(dev->lmmio);
+ fail2:
+	release_mem_region(pci_resource_start(pci_dev,0),
+			   pci_resource_len(pci_dev,0));
+ fail1:
+	v4l2_device_unregister(&dev->v4l2_dev);
+ fail0:
+	kfree(dev);
+	return err;
+}
+
+static void __devexit saa7134_finidev(struct pci_dev *pci_dev)
+{
+	struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev);
+	struct saa7134_dev *dev = container_of(v4l2_dev, struct saa7134_dev, v4l2_dev);
+	struct saa7134_mpeg_ops *mops;
+
+	flush_request_submodules(dev);
+
+	/* Release DMA sound modules if present */
+	if (saa7134_dmasound_exit && dev->dmasound.priv_data) {
+		saa7134_dmasound_exit(dev);
+	}
+
+	/* debugging ... */
+	if (irq_debug) {
+		u32 report = saa_readl(SAA7134_IRQ_REPORT);
+		u32 status = saa_readl(SAA7134_IRQ_STATUS);
+		print_irqstatus(dev,42,report,status);
+	}
+
+	/* disable peripheral devices */
+	saa_writeb(SAA7134_SPECIAL_MODE,0);
+
+	/* shutdown hardware */
+	saa_writel(SAA7134_IRQ1,0);
+	saa_writel(SAA7134_IRQ2,0);
+	saa_writel(SAA7134_MAIN_CTRL,0);
+
+	/* shutdown subsystems */
+	saa7134_hwfini(dev);
+
+	/* unregister */
+	mutex_lock(&saa7134_devlist_lock);
+	list_del(&dev->devlist);
+	list_for_each_entry(mops, &mops_list, next)
+		mpeg_ops_detach(mops, dev);
+	mutex_unlock(&saa7134_devlist_lock);
+	saa7134_devcount--;
+
+	saa7134_i2c_unregister(dev);
+	saa7134_unregister_video(dev);
+
+
+	/* the DMA sound modules should be unloaded before reaching
+	   this, but just in case they are still present... */
+	if (dev->dmasound.priv_data != NULL) {
+		free_irq(pci_dev->irq, &dev->dmasound);
+		dev->dmasound.priv_data = NULL;
+	}
+
+
+	/* release resources */
+	free_irq(pci_dev->irq, dev);
+	iounmap(dev->lmmio);
+	release_mem_region(pci_resource_start(pci_dev,0),
+			   pci_resource_len(pci_dev,0));
+
+
+	v4l2_device_unregister(&dev->v4l2_dev);
+
+	/* free memory */
+	kfree(dev);
+}
+
+#ifdef CONFIG_PM
+
+/* resends a current buffer in queue after resume */
+static int saa7134_buffer_requeue(struct saa7134_dev *dev,
+				  struct saa7134_dmaqueue *q)
+{
+	struct saa7134_buf *buf, *next;
+
+	assert_spin_locked(&dev->slock);
+
+	buf  = q->curr;
+	next = buf;
+	dprintk("buffer_requeue\n");
+
+	if (!buf)
+		return 0;
+
+	dprintk("buffer_requeue : resending active buffers \n");
+
+	if (!list_empty(&q->queue))
+		next = list_entry(q->queue.next, struct saa7134_buf,
+					  vb.queue);
+	buf->activate(dev, buf, next);
+
+	return 0;
+}
+
+static int saa7134_suspend(struct pci_dev *pci_dev , pm_message_t state)
+{
+	struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev);
+	struct saa7134_dev *dev = container_of(v4l2_dev, struct saa7134_dev, v4l2_dev);
+
+	/* disable overlay - apps should enable it explicitly on resume*/
+	dev->ovenable = 0;
+
+	/* Disable interrupts, DMA, and rest of the chip*/
+	saa_writel(SAA7134_IRQ1, 0);
+	saa_writel(SAA7134_IRQ2, 0);
+	saa_writel(SAA7134_MAIN_CTRL, 0);
+
+	dev->insuspend = 1;
+	synchronize_irq(pci_dev->irq);
+
+	/* ACK interrupts once more, just in case,
+		since the IRQ handler won't ack them anymore*/
+
+	saa_writel(SAA7134_IRQ_REPORT, saa_readl(SAA7134_IRQ_REPORT));
+
+	/* Disable timeout timers - if we have active buffers, we will
+	   fill them on resume*/
+
+	del_timer(&dev->video_q.timeout);
+	del_timer(&dev->vbi_q.timeout);
+	del_timer(&dev->ts_q.timeout);
+
+	if (dev->remote)
+		saa7134_ir_stop(dev);
+
+	pci_save_state(pci_dev);
+	pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state));
+
+	return 0;
+}
+
+static int saa7134_resume(struct pci_dev *pci_dev)
+{
+	struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev);
+	struct saa7134_dev *dev = container_of(v4l2_dev, struct saa7134_dev, v4l2_dev);
+	unsigned long flags;
+
+	pci_set_power_state(pci_dev, PCI_D0);
+	pci_restore_state(pci_dev);
+
+	/* Do things that are done in saa7134_initdev ,
+		except of initializing memory structures.*/
+
+	saa7134_board_init1(dev);
+
+	/* saa7134_hwinit1 */
+	if (saa7134_boards[dev->board].video_out)
+		saa7134_videoport_init(dev);
+	if (card_has_mpeg(dev))
+		saa7134_ts_init_hw(dev);
+	if (dev->remote)
+		saa7134_ir_start(dev);
+	saa7134_hw_enable1(dev);
+
+	msleep(100);
+
+	saa7134_board_init2(dev);
+
+	/*saa7134_hwinit2*/
+	saa7134_set_tvnorm_hw(dev);
+	saa7134_tvaudio_setmute(dev);
+	saa7134_tvaudio_setvolume(dev, dev->ctl_volume);
+	saa7134_tvaudio_init(dev);
+	saa7134_enable_i2s(dev);
+	saa7134_hw_enable2(dev);
+
+	saa7134_irq_video_signalchange(dev);
+
+	/*resume unfinished buffer(s)*/
+	spin_lock_irqsave(&dev->slock, flags);
+	saa7134_buffer_requeue(dev, &dev->video_q);
+	saa7134_buffer_requeue(dev, &dev->vbi_q);
+	saa7134_buffer_requeue(dev, &dev->ts_q);
+
+	/* FIXME: Disable DMA audio sound - temporary till proper support
+		  is implemented*/
+
+	dev->dmasound.dma_running = 0;
+
+	/* start DMA now*/
+	dev->insuspend = 0;
+	smp_wmb();
+	saa7134_set_dmabits(dev);
+	spin_unlock_irqrestore(&dev->slock, flags);
+
+	return 0;
+}
+#endif
+
+/* ----------------------------------------------------------- */
+
+int saa7134_ts_register(struct saa7134_mpeg_ops *ops)
+{
+	struct saa7134_dev *dev;
+
+	mutex_lock(&saa7134_devlist_lock);
+	list_for_each_entry(dev, &saa7134_devlist, devlist)
+		mpeg_ops_attach(ops, dev);
+	list_add_tail(&ops->next,&mops_list);
+	mutex_unlock(&saa7134_devlist_lock);
+	return 0;
+}
+
+void saa7134_ts_unregister(struct saa7134_mpeg_ops *ops)
+{
+	struct saa7134_dev *dev;
+
+	mutex_lock(&saa7134_devlist_lock);
+	list_del(&ops->next);
+	list_for_each_entry(dev, &saa7134_devlist, devlist)
+		mpeg_ops_detach(ops, dev);
+	mutex_unlock(&saa7134_devlist_lock);
+}
+
+EXPORT_SYMBOL(saa7134_ts_register);
+EXPORT_SYMBOL(saa7134_ts_unregister);
+
+/* ----------------------------------------------------------- */
+
+static struct pci_driver saa7134_pci_driver = {
+	.name     = "saa7134",
+	.id_table = saa7134_pci_tbl,
+	.probe    = saa7134_initdev,
+	.remove   = __devexit_p(saa7134_finidev),
+#ifdef CONFIG_PM
+	.suspend  = saa7134_suspend,
+	.resume   = saa7134_resume
+#endif
+};
+
+static int __init saa7134_init(void)
+{
+	INIT_LIST_HEAD(&saa7134_devlist);
+	printk(KERN_INFO "saa7130/34: v4l2 driver version %s loaded\n",
+	       SAA7134_VERSION);
+	return pci_register_driver(&saa7134_pci_driver);
+}
+
+static void __exit saa7134_fini(void)
+{
+	pci_unregister_driver(&saa7134_pci_driver);
+}
+
+module_init(saa7134_init);
+module_exit(saa7134_fini);
+
+/* ----------------------------------------------------------- */
+
+EXPORT_SYMBOL(saa7134_set_gpio);
+EXPORT_SYMBOL(saa7134_boards);
+
+/* ----------------- for the DMA sound modules --------------- */
+
+EXPORT_SYMBOL(saa7134_dmasound_init);
+EXPORT_SYMBOL(saa7134_dmasound_exit);
+EXPORT_SYMBOL(saa7134_pgtable_free);
+EXPORT_SYMBOL(saa7134_pgtable_build);
+EXPORT_SYMBOL(saa7134_pgtable_alloc);
+EXPORT_SYMBOL(saa7134_set_dmabits);
+
+/* ----------------------------------------------------------- */
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */