Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media update from Mauro Carvalho Chehab:

 - OF documentation and patches at core and drivers, to be used by for
   embedded media systems

 - some I2C drivers used on go7007 were rewritten/promoted from staging:
   sony-btf-mpx, tw2804, tw9903, tw9906, wis-ov7640, wis-uda1342

 - add fimc-is driver (Exynos)

 - add a new radio driver: radio-si476x

 - add a two new tuners: r820t and tuner_it913x

 - split camera code on em28xx driver and add more models

 - the cypress firmware load is used outside dvb usb drivers.  So, move
   it to a common directory to make easier to re-use it

 - siano media driver updated to work with sms2270 devices

 - several work done in order to promote go7007 and solo6x1x out of
   staging (still, there are some pending issues)

 - several API compliance fixes at v4l2 drivers that don't behave as
   expected

 - as usual, lots of driver fixes, improvements, cleanups and new device
   addition at the existing drivers.

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (831 commits)
  [media] cx88: make core less verbose
  [media] em28xx: fix oops at em28xx_dvb_bus_ctrl()
  [media] s5c73m3: fix indentation of the help section in Kconfig
  [media] cx25821-alsa: get rid of a __must_check warning
  [media] cx25821-video: declare cx25821_vidioc_s_std as static
  [media] cx25821-video: remove maxw from cx25821_vidioc_try_fmt_vid_cap
  [media] r820t: Remove a warning for an unused value
  [media] dib0090: Fix a warning at dib0090_set_EFUSE
  [media] dib8000: fix a warning
  [media] dib8000: Fix sub-channel range
  [media] dib8000: store dtv_property_cache in a temp var
  [media] dib8000: warning fix: declare internal functions as static
  [media] r820t: quiet gcc warning on n_ring
  [media] r820t: memory leak in release()
  [media] r820t: precendence bug in r820t_xtal_check()
  [media] videodev2.h: Remove the unused old V4L1 buffer types
  [media] anysee: Grammar s/report the/report to/
  [media] anysee: Initialize ret = 0 in anysee_frontend_attach()
  [media] media: videobuf2: fix the length check for mmap
  [media] em28xx: save isoc endpoint number for DVB only if endpoint has alt settings with xMaxPacketSize != 0
  ...

1 files changed, 266 insertions, 0 deletions

diff --git a/drivers/media/v4l2-core/v4l2-of.c b/drivers/media/v4l2-core/v4l2-of.c
new file mode 100644
index 0000000..aa59639
--- /dev/null
+++ b/drivers/media/v4l2-core/v4l2-of.c
@@ -0,0 +1,266 @@
+/*
+ * V4L2 OF binding parsing library
+ *
+ * Copyright (C) 2012 - 2013 Samsung Electronics Co., Ltd.
+ * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * Copyright (C) 2012 Renesas Electronics Corp.
+ * Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <media/v4l2-of.h>
+
+static void v4l2_of_parse_csi_bus(const struct device_node *node,
+				  struct v4l2_of_endpoint *endpoint)
+{
+	struct v4l2_of_bus_mipi_csi2 *bus = &endpoint->bus.mipi_csi2;
+	u32 data_lanes[ARRAY_SIZE(bus->data_lanes)];
+	struct property *prop;
+	bool have_clk_lane = false;
+	unsigned int flags = 0;
+	u32 v;
+
+	prop = of_find_property(node, "data-lanes", NULL);
+	if (prop) {
+		const __be32 *lane = NULL;
+		int i;
+
+		for (i = 0; i < ARRAY_SIZE(data_lanes); i++) {
+			lane = of_prop_next_u32(prop, lane, &data_lanes[i]);
+			if (!lane)
+				break;
+		}
+		bus->num_data_lanes = i;
+		while (i--)
+			bus->data_lanes[i] = data_lanes[i];
+	}
+
+	if (!of_property_read_u32(node, "clock-lanes", &v)) {
+		bus->clock_lane = v;
+		have_clk_lane = true;
+	}
+
+	if (of_get_property(node, "clock-noncontinuous", &v))
+		flags |= V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK;
+	else if (have_clk_lane || bus->num_data_lanes > 0)
+		flags |= V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
+
+	bus->flags = flags;
+	endpoint->bus_type = V4L2_MBUS_CSI2;
+}
+
+static void v4l2_of_parse_parallel_bus(const struct device_node *node,
+				       struct v4l2_of_endpoint *endpoint)
+{
+	struct v4l2_of_bus_parallel *bus = &endpoint->bus.parallel;
+	unsigned int flags = 0;
+	u32 v;
+
+	if (!of_property_read_u32(node, "hsync-active", &v))
+		flags |= v ? V4L2_MBUS_HSYNC_ACTIVE_HIGH :
+			V4L2_MBUS_HSYNC_ACTIVE_LOW;
+
+	if (!of_property_read_u32(node, "vsync-active", &v))
+		flags |= v ? V4L2_MBUS_VSYNC_ACTIVE_HIGH :
+			V4L2_MBUS_VSYNC_ACTIVE_LOW;
+
+	if (!of_property_read_u32(node, "pclk-sample", &v))
+		flags |= v ? V4L2_MBUS_PCLK_SAMPLE_RISING :
+			V4L2_MBUS_PCLK_SAMPLE_FALLING;
+
+	if (!of_property_read_u32(node, "field-even-active", &v))
+		flags |= v ? V4L2_MBUS_FIELD_EVEN_HIGH :
+			V4L2_MBUS_FIELD_EVEN_LOW;
+	if (flags)
+		endpoint->bus_type = V4L2_MBUS_PARALLEL;
+	else
+		endpoint->bus_type = V4L2_MBUS_BT656;
+
+	if (!of_property_read_u32(node, "data-active", &v))
+		flags |= v ? V4L2_MBUS_DATA_ACTIVE_HIGH :
+			V4L2_MBUS_DATA_ACTIVE_LOW;
+
+	if (of_get_property(node, "slave-mode", &v))
+		flags |= V4L2_MBUS_SLAVE;
+	else
+		flags |= V4L2_MBUS_MASTER;
+
+	if (!of_property_read_u32(node, "bus-width", &v))
+		bus->bus_width = v;
+
+	if (!of_property_read_u32(node, "data-shift", &v))
+		bus->data_shift = v;
+
+	bus->flags = flags;
+
+}
+
+/**
+ * v4l2_of_parse_endpoint() - parse all endpoint node properties
+ * @node: pointer to endpoint device_node
+ * @endpoint: pointer to the V4L2 OF endpoint data structure
+ *
+ * All properties are optional. If none are found, we don't set any flags.
+ * This means the port has a static configuration and no properties have
+ * to be specified explicitly.
+ * If any properties that identify the bus as parallel are found and
+ * slave-mode isn't set, we set V4L2_MBUS_MASTER. Similarly, if we recognise
+ * the bus as serial CSI-2 and clock-noncontinuous isn't set, we set the
+ * V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag.
+ * The caller should hold a reference to @node.
+ */
+void v4l2_of_parse_endpoint(const struct device_node *node,
+			    struct v4l2_of_endpoint *endpoint)
+{
+	struct device_node *port_node = of_get_parent(node);
+
+	memset(endpoint, 0, offsetof(struct v4l2_of_endpoint, head));
+
+	endpoint->local_node = node;
+	/*
+	 * It doesn't matter whether the two calls below succeed.
+	 * If they don't then the default value 0 is used.
+	 */
+	of_property_read_u32(port_node, "reg", &endpoint->port);
+	of_property_read_u32(node, "reg", &endpoint->id);
+
+	v4l2_of_parse_csi_bus(node, endpoint);
+	/*
+	 * Parse the parallel video bus properties only if none
+	 * of the MIPI CSI-2 specific properties were found.
+	 */
+	if (endpoint->bus.mipi_csi2.flags == 0)
+		v4l2_of_parse_parallel_bus(node, endpoint);
+
+	of_node_put(port_node);
+}
+EXPORT_SYMBOL(v4l2_of_parse_endpoint);
+
+/**
+ * v4l2_of_get_next_endpoint() - get next endpoint node
+ * @parent: pointer to the parent device node
+ * @prev: previous endpoint node, or NULL to get first
+ *
+ * Return: An 'endpoint' node pointer with refcount incremented. Refcount
+ * of the passed @prev node is not decremented, the caller have to use
+ * of_node_put() on it when done.
+ */
+struct device_node *v4l2_of_get_next_endpoint(const struct device_node *parent,
+					struct device_node *prev)
+{
+	struct device_node *endpoint;
+	struct device_node *port = NULL;
+
+	if (!parent)
+		return NULL;
+
+	if (!prev) {
+		struct device_node *node;
+		/*
+		 * It's the first call, we have to find a port subnode
+		 * within this node or within an optional 'ports' node.
+		 */
+		node = of_get_child_by_name(parent, "ports");
+		if (node)
+			parent = node;
+
+		for_each_child_of_node(parent, node) {
+			if (!of_node_cmp(node->name, "port")) {
+				port = node;
+				break;
+			}
+		}
+		if (port) {
+			/* Found a port, get an endpoint. */
+			endpoint = of_get_next_child(port, NULL);
+			of_node_put(port);
+		} else {
+			endpoint = NULL;
+		}
+
+		if (!endpoint)
+			pr_err("%s(): no endpoint nodes specified for %s\n",
+			       __func__, parent->full_name);
+	} else {
+		port = of_get_parent(prev);
+		if (!port)
+			/* Hm, has someone given us the root node ?... */
+			return NULL;
+
+		/* Avoid dropping prev node refcount to 0. */
+		of_node_get(prev);
+		endpoint = of_get_next_child(port, prev);
+		if (endpoint) {
+			of_node_put(port);
+			return endpoint;
+		}
+
+		/* No more endpoints under this port, try the next one. */
+		do {
+			port = of_get_next_child(parent, port);
+			if (!port)
+				return NULL;
+		} while (of_node_cmp(port->name, "port"));
+
+		/* Pick up the first endpoint in this port. */
+		endpoint = of_get_next_child(port, NULL);
+		of_node_put(port);
+	}
+
+	return endpoint;
+}
+EXPORT_SYMBOL(v4l2_of_get_next_endpoint);
+
+/**
+ * v4l2_of_get_remote_port_parent() - get remote port's parent node
+ * @node: pointer to a local endpoint device_node
+ *
+ * Return: Remote device node associated with remote endpoint node linked
+ *	   to @node. Use of_node_put() on it when done.
+ */
+struct device_node *v4l2_of_get_remote_port_parent(
+			       const struct device_node *node)
+{
+	struct device_node *np;
+	unsigned int depth;
+
+	/* Get remote endpoint node. */
+	np = of_parse_phandle(node, "remote-endpoint", 0);
+
+	/* Walk 3 levels up only if there is 'ports' node. */
+	for (depth = 3; depth && np; depth--) {
+		np = of_get_next_parent(np);
+		if (depth == 2 && of_node_cmp(np->name, "ports"))
+			break;
+	}
+	return np;
+}
+EXPORT_SYMBOL(v4l2_of_get_remote_port_parent);
+
+/**
+ * v4l2_of_get_remote_port() - get remote port node
+ * @node: pointer to a local endpoint device_node
+ *
+ * Return: Remote port node associated with remote endpoint node linked
+ *	   to @node. Use of_node_put() on it when done.
+ */
+struct device_node *v4l2_of_get_remote_port(const struct device_node *node)
+{
+	struct device_node *np;
+
+	/* Get remote endpoint node. */
+	np = of_parse_phandle(node, "remote-endpoint", 0);
+	if (!np)
+		return NULL;
+	return of_get_parent(np);
+}
+EXPORT_SYMBOL(v4l2_of_get_remote_port);