diff options
author | Lee Jones <lee.jones@linaro.org> | 2013-02-11 10:38:00 (GMT) |
---|---|---|
committer | Lee Jones <lee.jones@linaro.org> | 2013-03-07 04:28:21 (GMT) |
commit | e4bffe8d8ad9856143b6e941a17870aee37413d7 (patch) | |
tree | 591f0b3e5c7c08c14ef1483b810cd2eaa4ccdee4 /drivers/mfd | |
parent | 75932094601b404fc9ef28f7b6c0aa83dd619af0 (diff) | |
download | linux-fsl-qoriq-e4bffe8d8ad9856143b6e941a17870aee37413d7.tar.xz |
mfd: ab8500-gpadc: Add support for the AB8540
This patch enables the GPADC to work on AB8540 based platforms.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Diffstat (limited to 'drivers/mfd')
-rw-r--r-- | drivers/mfd/ab8500-gpadc.c | 316 |
1 files changed, 276 insertions, 40 deletions
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c index fc8da44..c985b90 100644 --- a/drivers/mfd/ab8500-gpadc.c +++ b/drivers/mfd/ab8500-gpadc.c @@ -37,6 +37,13 @@ #define AB8500_GPADC_AUTODATAL_REG 0x07 #define AB8500_GPADC_AUTODATAH_REG 0x08 #define AB8500_GPADC_MUX_CTRL_REG 0x09 +#define AB8540_GPADC_MANDATA2L_REG 0x09 +#define AB8540_GPADC_MANDATA2H_REG 0x0A +#define AB8540_GPADC_APEAAX_REG 0x10 +#define AB8540_GPADC_APEAAT_REG 0x11 +#define AB8540_GPADC_APEAAM_REG 0x12 +#define AB8540_GPADC_APEAAH_REG 0x13 +#define AB8540_GPADC_APEAAL_REG 0x14 /* * OTP register offsets @@ -49,6 +56,10 @@ #define AB8500_GPADC_CAL_5 0x13 #define AB8500_GPADC_CAL_6 0x14 #define AB8500_GPADC_CAL_7 0x15 +/* New calibration for 8540 */ +#define AB8540_GPADC_OTP4_REG_7 0x38 +#define AB8540_GPADC_OTP4_REG_6 0x39 +#define AB8540_GPADC_OTP4_REG_5 0x3A /* gpadc constants */ #define EN_VINTCORE12 0x04 @@ -67,6 +78,7 @@ #define GPADC_BUSY 0x01 #define EN_FALLING 0x10 #define EN_TRIG_EDGE 0x02 +#define EN_VBIAS_XTAL_TEMP 0x02 /* GPADC constants from AB8500 spec, UM0836 */ #define ADC_RESOLUTION 1024 @@ -85,8 +97,21 @@ #define ADC_CH_BKBAT_MIN 0 #define ADC_CH_BKBAT_MAX 3200 +/* GPADC constants from AB8540 spec */ +#define ADC_CH_IBAT_MIN (-6000) /* mA range measured by ADC for ibat*/ +#define ADC_CH_IBAT_MAX 6000 +#define ADC_CH_IBAT_MIN_V (-60) /* mV range measured by ADC for ibat*/ +#define ADC_CH_IBAT_MAX_V 60 +#define IBAT_VDROP_L (-56) /* mV */ +#define IBAT_VDROP_H 56 + /* This is used to not lose precision when dividing to get gain and offset */ -#define CALIB_SCALE 1000 +#define CALIB_SCALE 1000 +/* + * Number of bits shift used to not lose precision + * when dividing to get ibat gain. + */ +#define CALIB_SHIFT_IBAT 20 /* Time in ms before disabling regulator */ #define GPADC_AUDOSUSPEND_DELAY 1 @@ -97,6 +122,7 @@ enum cal_channels { ADC_INPUT_VMAIN = 0, ADC_INPUT_BTEMP, ADC_INPUT_VBAT, + ADC_INPUT_IBAT, NBR_CAL_INPUTS, }; @@ -107,8 +133,8 @@ enum cal_channels { * @offset: Offset of the ADC channel */ struct adc_cal_data { - u64 gain; - u64 offset; + s64 gain; + s64 offset; }; /** @@ -180,6 +206,7 @@ int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel, gpadc->cal_data[ADC_INPUT_VMAIN].offset) / CALIB_SCALE; break; + case XTAL_TEMP: case BAT_CTRL: case BTEMP_BALL: case ACC_DETECT1: @@ -198,6 +225,7 @@ int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel, break; case MAIN_BAT_V: + case VBAT_TRUE_MEAS: /* For some reason we don't have calibrated data */ if (!gpadc->cal_data[ADC_INPUT_VBAT].gain) { res = ADC_CH_VBAT_MIN + (ADC_CH_VBAT_MAX - @@ -241,6 +269,20 @@ int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel, ADC_RESOLUTION; break; + case IBAT_VIRTUAL_CHANNEL: + /* For some reason we don't have calibrated data */ + if (!gpadc->cal_data[ADC_INPUT_IBAT].gain) { + res = ADC_CH_IBAT_MIN + (ADC_CH_IBAT_MAX - + ADC_CH_IBAT_MIN) * ad_value / + ADC_RESOLUTION; + break; + } + /* Here we can use the calibrated data */ + res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_IBAT].gain + + gpadc->cal_data[ADC_INPUT_IBAT].offset) + >> CALIB_SHIFT_IBAT; + break; + default: dev_err(gpadc->dev, "unknown channel, not possible to convert\n"); @@ -304,9 +346,19 @@ EXPORT_SYMBOL(ab8500_gpadc_convert); int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel, u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type) { + int raw_data; + raw_data = ab8500_gpadc_double_read_raw(gpadc, channel, + avg_sample, trig_edge, trig_timer, conv_type, NULL); + return raw_data; +} + +int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel, + u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type, + int *ibat) +{ int ret; int looplimit = 0; - u8 val, low_data, high_data; + u8 val, low_data, high_data, low_data2, high_data2; if (!gpadc) return -ENODEV; @@ -359,7 +411,6 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel, default: val = channel | AVG_16; break; - } if (conv_type == ADC_HW) @@ -383,8 +434,8 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel, ret = abx500_mask_and_set_register_interruptible(gpadc->dev, AB8500_GPADC, AB8500_GPADC_CTRL1_REG, EN_FALLING, EN_FALLING); - } + switch (channel) { case MAIN_CHARGER_C: case USB_CHARGER_C: @@ -401,6 +452,55 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel, EN_BUF | EN_ICHAR, EN_BUF | EN_ICHAR); break; + + case XTAL_TEMP: + if (conv_type == ADC_HW) + ret = abx500_mask_and_set_register_interruptible( + gpadc->dev, + AB8500_GPADC, AB8500_GPADC_CTRL1_REG, + EN_BUF | EN_TRIG_EDGE, + EN_BUF | EN_TRIG_EDGE); + else + ret = abx500_mask_and_set_register_interruptible( + gpadc->dev, + AB8500_GPADC, AB8500_GPADC_CTRL1_REG, + EN_BUF , + EN_BUF); + break; + + case VBAT_TRUE_MEAS: + if (conv_type == ADC_HW) + ret = abx500_mask_and_set_register_interruptible( + gpadc->dev, + AB8500_GPADC, AB8500_GPADC_CTRL1_REG, + EN_BUF | EN_TRIG_EDGE, + EN_BUF | EN_TRIG_EDGE); + else + ret = abx500_mask_and_set_register_interruptible( + gpadc->dev, + AB8500_GPADC, AB8500_GPADC_CTRL1_REG, + EN_BUF , + EN_BUF); + break; + + case BAT_CTRL_AND_IBAT: + case VBAT_MEAS_AND_IBAT: + case VBAT_TRUE_MEAS_AND_IBAT: + case BAT_TEMP_AND_IBAT: + if (conv_type == ADC_HW) + ret = abx500_mask_and_set_register_interruptible( + gpadc->dev, + AB8500_GPADC, AB8500_GPADC_CTRL1_REG, + EN_TRIG_EDGE, + EN_TRIG_EDGE); + else + ret = abx500_mask_and_set_register_interruptible( + gpadc->dev, + AB8500_GPADC, AB8500_GPADC_CTRL1_REG, + EN_BUF, + 0); + break; + case BTEMP_BALL: if (!is_ab8500_2p0_or_earlier(gpadc->parent)) { if (conv_type == ADC_HW) @@ -471,21 +571,19 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel, /* wait for completion of conversion */ if (conv_type == ADC_HW) { if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete, - 2*HZ)) { - dev_err(gpadc->dev, - "timeout didn't receive" - " hw GPADC conv interrupt\n"); - ret = -EINVAL; - goto out; + 2 * HZ)) { + dev_err(gpadc->dev, + "timeout didn't receive hw GPADC conv interrupt\n"); + ret = -EINVAL; + goto out; } } else { if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete, - msecs_to_jiffies(CONVERSION_TIME))) { - dev_err(gpadc->dev, - "timeout didn't receive" - " sw GPADC conv interrupt\n"); - ret = -EINVAL; - goto out; + msecs_to_jiffies(CONVERSION_TIME))) { + dev_err(gpadc->dev, + "timeout didn't receive sw GPADC conv interrupt\n"); + ret = -EINVAL; + goto out; } } @@ -523,6 +621,46 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel, goto out; } } + /* Check if double convertion is required */ + if ((channel == BAT_CTRL_AND_IBAT) || + (channel == VBAT_MEAS_AND_IBAT) || + (channel == VBAT_TRUE_MEAS_AND_IBAT) || + (channel == BAT_TEMP_AND_IBAT)) { + + if (conv_type == ADC_HW) { + /* not supported */ + ret = -ENOTSUPP; + dev_err(gpadc->dev, + "gpadc_conversion: only SW double conversion supported\n"); + goto out; + } else { + /* Read the converted RAW data 2 */ + ret = abx500_get_register_interruptible(gpadc->dev, + AB8500_GPADC, AB8540_GPADC_MANDATA2L_REG, + &low_data2); + if (ret < 0) { + dev_err(gpadc->dev, + "gpadc_conversion: read sw low data 2 failed\n"); + goto out; + } + + ret = abx500_get_register_interruptible(gpadc->dev, + AB8500_GPADC, AB8540_GPADC_MANDATA2H_REG, + &high_data2); + if (ret < 0) { + dev_err(gpadc->dev, + "gpadc_conversion: read sw high data 2 failed\n"); + goto out; + } + if (ibat != NULL) { + *ibat = (high_data2 << 8) | low_data2; + } else { + dev_warn(gpadc->dev, + "gpadc_conversion: ibat not stored\n"); + } + + } + } /* Disable GPADC */ ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC, @@ -586,15 +724,27 @@ static int otp_cal_regs[] = { AB8500_GPADC_CAL_7, }; +static int otp4_cal_regs[] = { + AB8540_GPADC_OTP4_REG_7, + AB8540_GPADC_OTP4_REG_6, + AB8540_GPADC_OTP4_REG_5, +}; + static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc) { int i; int ret[ARRAY_SIZE(otp_cal_regs)]; u8 gpadc_cal[ARRAY_SIZE(otp_cal_regs)]; - + int ret_otp4[ARRAY_SIZE(otp4_cal_regs)]; + u8 gpadc_otp4[ARRAY_SIZE(otp4_cal_regs)]; int vmain_high, vmain_low; int btemp_high, btemp_low; int vbat_high, vbat_low; + int ibat_high, ibat_low; + s64 V_gain, V_offset, V2A_gain, V2A_offset; + struct ab8500 *ab8500; + + ab8500 = gpadc->parent; /* First we read all OTP registers and store the error code */ for (i = 0; i < ARRAY_SIZE(otp_cal_regs); i++) { @@ -614,7 +764,7 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc) * bt_h/l = btemp_high/low * vb_h/l = vbat_high/low * - * Data bits: + * Data bits 8500/9540: * | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 * |.......|.......|.......|.......|.......|.......|.......|....... * | | vm_h9 | vm_h8 @@ -632,6 +782,35 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc) * | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 | * |.......|.......|.......|.......|.......|.......|.......|....... * + * Data bits 8540: + * OTP2 + * | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | + * |.......|.......|.......|.......|.......|.......|.......|....... + * | vm_h9 | vm_h8 | vm_h7 | vm_h6 | vm_h5 | vm_h4 | vm_h3 | vm_h2 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | vm_h1 | vm_h0 | vm_l4 | vm_l3 | vm_l2 | vm_l1 | vm_l0 | bt_h9 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | bt_h8 | bt_h7 | bt_h6 | bt_h5 | bt_h4 | bt_h3 | bt_h2 | bt_h1 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | bt_h0 | bt_l4 | bt_l3 | bt_l2 | bt_l1 | bt_l0 | vb_h9 | vb_h8 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | vb_h7 | vb_h6 | vb_h5 | vb_h4 | vb_h3 | vb_h2 | vb_h1 | vb_h0 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 | + * |.......|.......|.......|.......|.......|.......|.......|....... + * + * Data bits 8540: + * OTP4 + * | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | | ib_h9 | ib_h8 | ib_h7 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | ib_h6 | ib_h5 | ib_h4 | ib_h3 | ib_h2 | ib_h1 | ib_h0 | ib_l5 + * |.......|.......|.......|.......|.......|.......|.......|....... + * | ib_l4 | ib_l3 | ib_l2 | ib_l1 | ib_l0 | + * * * Ideal output ADC codes corresponding to injected input voltages * during manufacturing is: @@ -644,38 +823,96 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc) * vbat_low: Vin = 2380mV / ADC ideal code = 33 */ - /* Calculate gain and offset for VMAIN if all reads succeeded */ - if (!(ret[0] < 0 || ret[1] < 0 || ret[2] < 0)) { - vmain_high = (((gpadc_cal[0] & 0x03) << 8) | - ((gpadc_cal[1] & 0x3F) << 2) | - ((gpadc_cal[2] & 0xC0) >> 6)); + if (is_ab8540(ab8500)) { + /* Calculate gain and offset for VMAIN if all reads succeeded*/ + if (!(ret[1] < 0 || ret[2] < 0)) { + vmain_high = (((gpadc_cal[1] & 0xFF) << 2) | + ((gpadc_cal[2] & 0xC0) >> 6)); + vmain_low = ((gpadc_cal[2] & 0x3E) >> 1); + gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE * + (19500 - 315) / (vmain_high - vmain_low); + gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE * + 19500 - (CALIB_SCALE * (19500 - 315) / + (vmain_high - vmain_low)) * vmain_high; + } else { + gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0; + } - vmain_low = ((gpadc_cal[2] & 0x3E) >> 1); + /* Read IBAT calibration Data */ + for (i = 0; i < ARRAY_SIZE(otp4_cal_regs); i++) { + ret_otp4[i] = abx500_get_register_interruptible( + gpadc->dev, AB8500_OTP_EMUL, + otp4_cal_regs[i], &gpadc_otp4[i]); + if (ret_otp4[i] < 0) + dev_err(gpadc->dev, + "%s: read otp4 reg 0x%02x failed\n", + __func__, otp4_cal_regs[i]); + } - gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE * - (19500 - 315) / (vmain_high - vmain_low); + /* Calculate gain and offset for IBAT if all reads succeeded */ + if (!(ret_otp4[0] < 0 || ret_otp4[1] < 0 || ret_otp4[2] < 0)) { + ibat_high = (((gpadc_otp4[0] & 0x07) << 7) | + ((gpadc_otp4[1] & 0xFE) >> 1)); + ibat_low = (((gpadc_otp4[1] & 0x01) << 5) | + ((gpadc_otp4[2] & 0xF8) >> 3)); + + V_gain = ((IBAT_VDROP_H - IBAT_VDROP_L) + << CALIB_SHIFT_IBAT) / (ibat_high - ibat_low); + + V_offset = (IBAT_VDROP_H << CALIB_SHIFT_IBAT) - + (((IBAT_VDROP_H - IBAT_VDROP_L) << + CALIB_SHIFT_IBAT) / (ibat_high - ibat_low)) + * ibat_high; + /* + * Result obtained is in mV (at a scale factor), + * we need to calculate gain and offset to get mA + */ + V2A_gain = (ADC_CH_IBAT_MAX - ADC_CH_IBAT_MIN)/ + (ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V); + V2A_offset = ((ADC_CH_IBAT_MAX_V * ADC_CH_IBAT_MIN - + ADC_CH_IBAT_MAX * ADC_CH_IBAT_MIN_V) + << CALIB_SHIFT_IBAT) + / (ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V); + + gpadc->cal_data[ADC_INPUT_IBAT].gain = V_gain * V2A_gain; + gpadc->cal_data[ADC_INPUT_IBAT].offset = V_offset * + V2A_gain + V2A_offset; + } else { + gpadc->cal_data[ADC_INPUT_IBAT].gain = 0; + } - gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE * 19500 - - (CALIB_SCALE * (19500 - 315) / - (vmain_high - vmain_low)) * vmain_high; + dev_dbg(gpadc->dev, "IBAT gain %llu offset %llu\n", + gpadc->cal_data[ADC_INPUT_IBAT].gain, + gpadc->cal_data[ADC_INPUT_IBAT].offset); } else { - gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0; + /* Calculate gain and offset for VMAIN if all reads succeeded */ + if (!(ret[0] < 0 || ret[1] < 0 || ret[2] < 0)) { + vmain_high = (((gpadc_cal[0] & 0x03) << 8) | + ((gpadc_cal[1] & 0x3F) << 2) | + ((gpadc_cal[2] & 0xC0) >> 6)); + vmain_low = ((gpadc_cal[2] & 0x3E) >> 1); + + gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE * + (19500 - 315) / (vmain_high - vmain_low); + + gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE * + 19500 - (CALIB_SCALE * (19500 - 315) / + (vmain_high - vmain_low)) * vmain_high; + } else { + gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0; + } } - /* Calculate gain and offset for BTEMP if all reads succeeded */ if (!(ret[2] < 0 || ret[3] < 0 || ret[4] < 0)) { btemp_high = (((gpadc_cal[2] & 0x01) << 9) | - (gpadc_cal[3] << 1) | - ((gpadc_cal[4] & 0x80) >> 7)); - + (gpadc_cal[3] << 1) | ((gpadc_cal[4] & 0x80) >> 7)); btemp_low = ((gpadc_cal[4] & 0x7C) >> 2); gpadc->cal_data[ADC_INPUT_BTEMP].gain = CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low); - gpadc->cal_data[ADC_INPUT_BTEMP].offset = CALIB_SCALE * 1300 - - (CALIB_SCALE * (1300 - 21) / - (btemp_high - btemp_low)) * btemp_high; + (CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low)) + * btemp_high; } else { gpadc->cal_data[ADC_INPUT_BTEMP].gain = 0; } @@ -687,7 +924,6 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc) gpadc->cal_data[ADC_INPUT_VBAT].gain = CALIB_SCALE * (4700 - 2380) / (vbat_high - vbat_low); - gpadc->cal_data[ADC_INPUT_VBAT].offset = CALIB_SCALE * 4700 - (CALIB_SCALE * (4700 - 2380) / (vbat_high - vbat_low)) * vbat_high; |