Merge 'akpm' patch series

* Merge akpm patch series: (122 commits)
  drivers/connector/cn_proc.c: remove unused local
  Documentation/SubmitChecklist: add RCU debug config options
  reiserfs: use hweight_long()
  reiserfs: use proper little-endian bitops
  pnpacpi: register disabled resources
  drivers/rtc/rtc-tegra.c: properly initialize spinlock
  drivers/rtc/rtc-twl.c: check return value of twl_rtc_write_u8() in twl_rtc_set_time()
  drivers/rtc: add support for Qualcomm PMIC8xxx RTC
  drivers/rtc/rtc-s3c.c: support clock gating
  drivers/rtc/rtc-mpc5121.c: add support for RTC on MPC5200
  init: skip calibration delay if previously done
  misc/eeprom: add eeprom access driver for digsy_mtc board
  misc/eeprom: add driver for microwire 93xx46 EEPROMs
  checkpatch.pl: update $logFunctions
  checkpatch: make utf-8 test --strict
  checkpatch.pl: add ability to ignore various messages
  checkpatch: add a "prefer __aligned" check
  checkpatch: validate signature styles and To: and Cc: lines
  checkpatch: add __rcu as a sparse modifier
  checkpatch: suggest using min_t or max_t
  ...

Did this as a merge because of (trivial) conflicts in
 - Documentation/feature-removal-schedule.txt
 - arch/xtensa/include/asm/uaccess.h
that were just easier to fix up in the merge than in the patch series.

1 files changed, 85 insertions, 0 deletions

diff --git a/drivers/misc/eeprom/digsy_mtc_eeprom.c b/drivers/misc/eeprom/digsy_mtc_eeprom.c
new file mode 100644
index 0000000..66d9e1b
--- /dev/null
+++ b/drivers/misc/eeprom/digsy_mtc_eeprom.c
@@ -0,0 +1,85 @@
+/*
+ * EEPROMs access control driver for display configuration EEPROMs
+ * on DigsyMTC board.
+ *
+ * (C) 2011 DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/eeprom_93xx46.h>
+
+#define GPIO_EEPROM_CLK		216
+#define GPIO_EEPROM_CS		210
+#define GPIO_EEPROM_DI		217
+#define GPIO_EEPROM_DO		249
+#define GPIO_EEPROM_OE		255
+#define EE_SPI_BUS_NUM	1
+
+static void digsy_mtc_op_prepare(void *p)
+{
+	/* enable */
+	gpio_set_value(GPIO_EEPROM_OE, 0);
+}
+
+static void digsy_mtc_op_finish(void *p)
+{
+	/* disable */
+	gpio_set_value(GPIO_EEPROM_OE, 1);
+}
+
+struct eeprom_93xx46_platform_data digsy_mtc_eeprom_data = {
+	.flags		= EE_ADDR8,
+	.prepare	= digsy_mtc_op_prepare,
+	.finish		= digsy_mtc_op_finish,
+};
+
+static struct spi_gpio_platform_data eeprom_spi_gpio_data = {
+	.sck		= GPIO_EEPROM_CLK,
+	.mosi		= GPIO_EEPROM_DI,
+	.miso		= GPIO_EEPROM_DO,
+	.num_chipselect	= 1,
+};
+
+static struct platform_device digsy_mtc_eeprom = {
+	.name	= "spi_gpio",
+	.id	= EE_SPI_BUS_NUM,
+	.dev	= {
+		.platform_data	= &eeprom_spi_gpio_data,
+	},
+};
+
+static struct spi_board_info digsy_mtc_eeprom_info[] __initdata = {
+	{
+		.modalias		= "93xx46",
+		.max_speed_hz		= 1000000,
+		.bus_num		= EE_SPI_BUS_NUM,
+		.chip_select		= 0,
+		.mode			= SPI_MODE_0,
+		.controller_data	= (void *)GPIO_EEPROM_CS,
+		.platform_data		= &digsy_mtc_eeprom_data,
+	},
+};
+
+static int __init digsy_mtc_eeprom_devices_init(void)
+{
+	int ret;
+
+	ret = gpio_request_one(GPIO_EEPROM_OE, GPIOF_OUT_INIT_HIGH,
+				"93xx46 EEPROMs OE");
+	if (ret) {
+		pr_err("can't request gpio %d\n", GPIO_EEPROM_OE);
+		return ret;
+	}
+	spi_register_board_info(digsy_mtc_eeprom_info,
+				ARRAY_SIZE(digsy_mtc_eeprom_info));
+	return platform_device_register(&digsy_mtc_eeprom);
+}
+device_initcall(digsy_mtc_eeprom_devices_init);