diff options
author | Adrian Hunter <adrian.hunter@nokia.com> | 2010-08-24 10:20:26 (GMT) |
---|---|---|
committer | Chris Ball <cjb@laptop.org> | 2010-10-23 13:11:16 (GMT) |
commit | 0f8d8ea64ec7c77ca5beb59534d386fe0235961a (patch) | |
tree | 8d6aebd250897aa33cb166994720497f40a9aaa6 /drivers/mmc/card | |
parent | dfc13e8402c75e7c2e0a52e123c0500a3259866b (diff) | |
download | linux-fsl-qoriq-0f8d8ea64ec7c77ca5beb59534d386fe0235961a.tar.xz |
mmc: Fixes for Dual Data Rate (DDR) support
The DDR support patch needs the following fixes:
- The block driver does not need to know about DDR, any more
than it needs to know about bus width.
- Not only the card must be switched to DDR mode. The host
controller must also be configured, which is done through
the 'set_ios()' function.
- Do not set the DDR mode state until after the switch command
is successful.
- Setting block length is not supported in DDR mode. Make that
a core function and change the other place it is used (mmc_test)
also.
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Diffstat (limited to 'drivers/mmc/card')
-rw-r--r-- | drivers/mmc/card/block.c | 19 | ||||
-rw-r--r-- | drivers/mmc/card/mmc_test.c | 12 |
2 files changed, 4 insertions, 27 deletions
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index aab5934..a997050 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -373,8 +373,6 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *req) readcmd = MMC_READ_SINGLE_BLOCK; writecmd = MMC_WRITE_BLOCK; } - if (mmc_card_ddr_mode(card)) - brq.data.flags |= MMC_DDR_MODE; if (rq_data_dir(req) == READ) { brq.cmd.opcode = readcmd; brq.data.flags |= MMC_DATA_READ; @@ -653,26 +651,15 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card) static int mmc_blk_set_blksize(struct mmc_blk_data *md, struct mmc_card *card) { - struct mmc_command cmd; int err; - /* - * Block-addressed and ddr mode supported cards - * ignore MMC_SET_BLOCKLEN. - */ - if (mmc_card_blockaddr(card) || mmc_card_ddr_mode(card)) - return 0; - mmc_claim_host(card->host); - cmd.opcode = MMC_SET_BLOCKLEN; - cmd.arg = 512; - cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; - err = mmc_wait_for_cmd(card->host, &cmd, 5); + err = mmc_set_blocklen(card, 512); mmc_release_host(card->host); if (err) { - printk(KERN_ERR "%s: unable to set block size to %d: %d\n", - md->disk->disk_name, cmd.arg, err); + printk(KERN_ERR "%s: unable to set block size to 512: %d\n", + md->disk->disk_name, err); return -EINVAL; } diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c index c38a3a8..21adc27 100644 --- a/drivers/mmc/card/mmc_test.c +++ b/drivers/mmc/card/mmc_test.c @@ -155,17 +155,7 @@ struct mmc_test_card { */ static int mmc_test_set_blksize(struct mmc_test_card *test, unsigned size) { - struct mmc_command cmd; - int ret; - - cmd.opcode = MMC_SET_BLOCKLEN; - cmd.arg = size; - cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; - ret = mmc_wait_for_cmd(test->card->host, &cmd, 0); - if (ret) - return ret; - - return 0; + return mmc_set_blocklen(test->card, size); } /* |