diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2011-01-07 00:50:35 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-01-07 00:50:35 (GMT) |
commit | 3c0cb7c31c206aaedb967e44b98442bbeb17a6c4 (patch) | |
tree | 3ecba45d7ffae4fba4a5aafaef4af5b0b1105bde /drivers/mmc | |
parent | f70f5b9dc74ca7d0a64c4ead3fb28da09dc1b234 (diff) | |
parent | 404a02cbd2ae8bf256a2fa1169bdfe86bb5ebb34 (diff) | |
download | linux-fsl-qoriq-3c0cb7c31c206aaedb967e44b98442bbeb17a6c4.tar.xz |
Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (416 commits)
ARM: DMA: add support for DMA debugging
ARM: PL011: add DMA burst threshold support for ST variants
ARM: PL011: Add support for transmit DMA
ARM: PL011: Ensure IRQs are disabled in UART interrupt handler
ARM: PL011: Separate hardware FIFO size from TTY FIFO size
ARM: PL011: Allow better handling of vendor data
ARM: PL011: Ensure error flags are clear at startup
ARM: PL011: include revision number in boot-time port printk
ARM: vexpress: add sched_clock() for Versatile Express
ARM i.MX53: Make MX53 EVK bootable
ARM i.MX53: Some bug fix about MX53 MSL code
ARM: 6607/1: sa1100: Update platform device registration
ARM: 6606/1: sa1100: Fix platform device registration
ARM i.MX51: rename IPU irqs
ARM i.MX51: Add ipu clock support
ARM: imx/mx27_3ds: Add PMIC support
ARM: DMA: Replace page_to_dma()/dma_to_page() with pfn_to_dma()/dma_to_pfn()
mx51: fix usb clock support
MX51: Add support for usb host 2
arch/arm/plat-mxc/ehci.c: fix errors/typos
...
Diffstat (limited to 'drivers/mmc')
-rw-r--r-- | drivers/mmc/host/mmci.c | 207 | ||||
-rw-r--r-- | drivers/mmc/host/mmci.h | 9 |
2 files changed, 186 insertions, 30 deletions
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 87b4fc6..5630228 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -19,6 +19,7 @@ #include <linux/highmem.h> #include <linux/log2.h> #include <linux/mmc/host.h> +#include <linux/mmc/card.h> #include <linux/amba/bus.h> #include <linux/clk.h> #include <linux/scatterlist.h> @@ -45,6 +46,12 @@ static unsigned int fmax = 515633; * is asserted (likewise for RX) * @fifohalfsize: number of bytes that can be written when MCI_TXFIFOHALFEMPTY * is asserted (likewise for RX) + * @broken_blockend: the MCI_DATABLOCKEND is broken on the hardware + * and will not work at all. + * @broken_blockend_dma: the MCI_DATABLOCKEND is broken on the hardware when + * using DMA. + * @sdio: variant supports SDIO + * @st_clkdiv: true if using a ST-specific clock divider algorithm */ struct variant_data { unsigned int clkreg; @@ -52,6 +59,10 @@ struct variant_data { unsigned int datalength_bits; unsigned int fifosize; unsigned int fifohalfsize; + bool broken_blockend; + bool broken_blockend_dma; + bool sdio; + bool st_clkdiv; }; static struct variant_data variant_arm = { @@ -65,6 +76,8 @@ static struct variant_data variant_u300 = { .fifohalfsize = 8 * 4, .clkreg_enable = 1 << 13, /* HWFCEN */ .datalength_bits = 16, + .broken_blockend_dma = true, + .sdio = true, }; static struct variant_data variant_ux500 = { @@ -73,7 +86,11 @@ static struct variant_data variant_ux500 = { .clkreg = MCI_CLK_ENABLE, .clkreg_enable = 1 << 14, /* HWFCEN */ .datalength_bits = 24, + .broken_blockend = true, + .sdio = true, + .st_clkdiv = true, }; + /* * This must be called with host->lock held */ @@ -86,7 +103,22 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired) if (desired >= host->mclk) { clk = MCI_CLK_BYPASS; host->cclk = host->mclk; + } else if (variant->st_clkdiv) { + /* + * DB8500 TRM says f = mclk / (clkdiv + 2) + * => clkdiv = (mclk / f) - 2 + * Round the divider up so we don't exceed the max + * frequency + */ + clk = DIV_ROUND_UP(host->mclk, desired) - 2; + if (clk >= 256) + clk = 255; + host->cclk = host->mclk / (clk + 2); } else { + /* + * PL180 TRM says f = mclk / (2 * (clkdiv + 1)) + * => clkdiv = mclk / (2 * f) - 1 + */ clk = host->mclk / (2 * desired) - 1; if (clk >= 256) clk = 255; @@ -129,10 +161,26 @@ mmci_request_end(struct mmci_host *host, struct mmc_request *mrq) spin_lock(&host->lock); } +static void mmci_set_mask1(struct mmci_host *host, unsigned int mask) +{ + void __iomem *base = host->base; + + if (host->singleirq) { + unsigned int mask0 = readl(base + MMCIMASK0); + + mask0 &= ~MCI_IRQ1MASK; + mask0 |= mask; + + writel(mask0, base + MMCIMASK0); + } + + writel(mask, base + MMCIMASK1); +} + static void mmci_stop_data(struct mmci_host *host) { writel(0, host->base + MMCIDATACTRL); - writel(0, host->base + MMCIMASK1); + mmci_set_mask1(host, 0); host->data = NULL; } @@ -162,6 +210,8 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) host->data = data; host->size = data->blksz * data->blocks; host->data_xfered = 0; + host->blockend = false; + host->dataend = false; mmci_init_sg(host, data); @@ -196,9 +246,14 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) irqmask = MCI_TXFIFOHALFEMPTYMASK; } + /* The ST Micro variants has a special bit to enable SDIO */ + if (variant->sdio && host->mmc->card) + if (mmc_card_sdio(host->mmc->card)) + datactrl |= MCI_ST_DPSM_SDIOEN; + writel(datactrl, base + MMCIDATACTRL); writel(readl(base + MMCIMASK0) & ~MCI_DATAENDMASK, base + MMCIMASK0); - writel(irqmask, base + MMCIMASK1); + mmci_set_mask1(host, irqmask); } static void @@ -233,20 +288,9 @@ static void mmci_data_irq(struct mmci_host *host, struct mmc_data *data, unsigned int status) { - if (status & MCI_DATABLOCKEND) { - host->data_xfered += data->blksz; -#ifdef CONFIG_ARCH_U300 - /* - * On the U300 some signal or other is - * badly routed so that a data write does - * not properly terminate with a MCI_DATAEND - * status flag. This quirk will make writes - * work again. - */ - if (data->flags & MMC_DATA_WRITE) - status |= MCI_DATAEND; -#endif - } + struct variant_data *variant = host->variant; + + /* First check for errors */ if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) { dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ (status %08x)\n", status); if (status & MCI_DATACRCFAIL) @@ -255,7 +299,10 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data, data->error = -ETIMEDOUT; else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN)) data->error = -EIO; - status |= MCI_DATAEND; + + /* Force-complete the transaction */ + host->blockend = true; + host->dataend = true; /* * We hit an error condition. Ensure that any data @@ -273,9 +320,64 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data, local_irq_restore(flags); } } - if (status & MCI_DATAEND) { + + /* + * On ARM variants in PIO mode, MCI_DATABLOCKEND + * is always sent first, and we increase the + * transfered number of bytes for that IRQ. Then + * MCI_DATAEND follows and we conclude the transaction. + * + * On the Ux500 single-IRQ variant MCI_DATABLOCKEND + * doesn't seem to immediately clear from the status, + * so we can't use it keep count when only one irq is + * used because the irq will hit for other reasons, and + * then the flag is still up. So we use the MCI_DATAEND + * IRQ at the end of the entire transfer because + * MCI_DATABLOCKEND is broken. + * + * In the U300, the IRQs can arrive out-of-order, + * e.g. MCI_DATABLOCKEND sometimes arrives after MCI_DATAEND, + * so for this case we use the flags "blockend" and + * "dataend" to make sure both IRQs have arrived before + * concluding the transaction. (This does not apply + * to the Ux500 which doesn't fire MCI_DATABLOCKEND + * at all.) In DMA mode it suffers from the same problem + * as the Ux500. + */ + if (status & MCI_DATABLOCKEND) { + /* + * Just being a little over-cautious, we do not + * use this progressive update if the hardware blockend + * flag is unreliable: since it can stay high between + * IRQs it will corrupt the transfer counter. + */ + if (!variant->broken_blockend) + host->data_xfered += data->blksz; + host->blockend = true; + } + + if (status & MCI_DATAEND) + host->dataend = true; + + /* + * On variants with broken blockend we shall only wait for dataend, + * on others we must sync with the blockend signal since they can + * appear out-of-order. + */ + if (host->dataend && (host->blockend || variant->broken_blockend)) { mmci_stop_data(host); + /* Reset these flags */ + host->blockend = false; + host->dataend = false; + + /* + * Variants with broken blockend flags need to handle the + * end of the entire transfer here. + */ + if (variant->broken_blockend && !data->error) + host->data_xfered += data->blksz * data->blocks; + if (!data->stop) { mmci_request_end(host, data->mrq); } else { @@ -356,7 +458,32 @@ static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int rem variant->fifosize : variant->fifohalfsize; count = min(remain, maxcnt); - writesl(base + MMCIFIFO, ptr, count >> 2); + /* + * The ST Micro variant for SDIO transfer sizes + * less then 8 bytes should have clock H/W flow + * control disabled. + */ + if (variant->sdio && + mmc_card_sdio(host->mmc->card)) { + if (count < 8) + writel(readl(host->base + MMCICLOCK) & + ~variant->clkreg_enable, + host->base + MMCICLOCK); + else + writel(readl(host->base + MMCICLOCK) | + variant->clkreg_enable, + host->base + MMCICLOCK); + } + + /* + * SDIO especially may want to send something that is + * not divisible by 4 (as opposed to card sectors + * etc), and the FIFO only accept full 32-bit writes. + * So compensate by adding +3 on the count, a single + * byte become a 32bit write, 7 bytes will be two + * 32bit writes etc. + */ + writesl(base + MMCIFIFO, ptr, (count + 3) >> 2); ptr += count; remain -= count; @@ -437,7 +564,7 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id) * "any data available" mode. */ if (status & MCI_RXACTIVE && host->size < variant->fifosize) - writel(MCI_RXDATAAVLBLMASK, base + MMCIMASK1); + mmci_set_mask1(host, MCI_RXDATAAVLBLMASK); /* * If we run out of data, disable the data IRQs; this @@ -446,7 +573,7 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id) * stops us racing with our data end IRQ. */ if (host->size == 0) { - writel(0, base + MMCIMASK1); + mmci_set_mask1(host, 0); writel(readl(base + MMCIMASK0) | MCI_DATAENDMASK, base + MMCIMASK0); } @@ -469,6 +596,14 @@ static irqreturn_t mmci_irq(int irq, void *dev_id) struct mmc_data *data; status = readl(host->base + MMCISTATUS); + + if (host->singleirq) { + if (status & readl(host->base + MMCIMASK1)) + mmci_pio_irq(irq, dev_id); + + status &= ~MCI_IRQ1MASK; + } + status &= readl(host->base + MMCIMASK0); writel(status, host->base + MMCICLEAR); @@ -635,6 +770,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) struct variant_data *variant = id->data; struct mmci_host *host; struct mmc_host *mmc; + unsigned int mask; int ret; /* must have platform data */ @@ -806,20 +942,30 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) if (ret) goto unmap; - ret = request_irq(dev->irq[1], mmci_pio_irq, IRQF_SHARED, DRIVER_NAME " (pio)", host); - if (ret) - goto irq0_free; + if (dev->irq[1] == NO_IRQ) + host->singleirq = true; + else { + ret = request_irq(dev->irq[1], mmci_pio_irq, IRQF_SHARED, + DRIVER_NAME " (pio)", host); + if (ret) + goto irq0_free; + } - writel(MCI_IRQENABLE, host->base + MMCIMASK0); + mask = MCI_IRQENABLE; + /* Don't use the datablockend flag if it's broken */ + if (variant->broken_blockend) + mask &= ~MCI_DATABLOCKEND; - amba_set_drvdata(dev, mmc); + writel(mask, host->base + MMCIMASK0); - mmc_add_host(mmc); + amba_set_drvdata(dev, mmc); - dev_info(&dev->dev, "%s: MMCI rev %x cfg %02x at 0x%016llx irq %d,%d\n", - mmc_hostname(mmc), amba_rev(dev), amba_config(dev), + dev_info(&dev->dev, "%s: PL%03x rev%u at 0x%08llx irq %d,%d\n", + mmc_hostname(mmc), amba_part(dev), amba_rev(dev), (unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]); + mmc_add_host(mmc); + return 0; irq0_free: @@ -864,7 +1010,8 @@ static int __devexit mmci_remove(struct amba_device *dev) writel(0, host->base + MMCIDATACTRL); free_irq(dev->irq[0], host); - free_irq(dev->irq[1], host); + if (!host->singleirq) + free_irq(dev->irq[1], host); if (host->gpio_wp != -ENOSYS) gpio_free(host->gpio_wp); diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index 4ae887f..df06f01 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -139,6 +139,11 @@ MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \ MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_DATABLOCKENDMASK) +/* These interrupts are directed to IRQ1 when two IRQ lines are available */ +#define MCI_IRQ1MASK \ + (MCI_RXFIFOHALFFULLMASK | MCI_RXDATAAVLBLMASK | \ + MCI_TXFIFOHALFEMPTYMASK) + #define NR_SG 16 struct clk; @@ -154,6 +159,7 @@ struct mmci_host { int gpio_cd; int gpio_wp; int gpio_cd_irq; + bool singleirq; unsigned int data_xfered; @@ -171,6 +177,9 @@ struct mmci_host { struct timer_list timer; unsigned int oldstat; + bool blockend; + bool dataend; + /* pio stuff */ struct sg_mapping_iter sg_miter; unsigned int size; |