Merge v3.5-rc5 into driver-core-next

This picks up the big printk fixes, and resolves a merge issue with:
	drivers/extcon/extcon_gpio.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

14 files changed, 84 insertions, 70 deletions

diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index dd2d374..276d21c 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -554,7 +554,6 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
 	struct mmc_request mrq = {NULL};
 	struct mmc_command cmd = {0};
 	struct mmc_data data = {0};
-	unsigned int timeout_us;
 
 	struct scatterlist sg;
 
@@ -574,23 +573,12 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
 	cmd.arg = 0;
 	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
 
-	data.timeout_ns = card->csd.tacc_ns * 100;
-	data.timeout_clks = card->csd.tacc_clks * 100;
-
-	timeout_us = data.timeout_ns / 1000;
-	timeout_us += data.timeout_clks * 1000 /
-		(card->host->ios.clock / 1000);
-
-	if (timeout_us > 100000) {
-		data.timeout_ns = 100000000;
-		data.timeout_clks = 0;
-	}
-
 	data.blksz = 4;
 	data.blocks = 1;
 	data.flags = MMC_DATA_READ;
 	data.sg = &sg;
 	data.sg_len = 1;
+	mmc_set_data_timeout(&data, card);
 
 	mrq.cmd = &cmd;
 	mrq.data = &data;
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 2d4a4b7..258b203 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1326,7 +1326,7 @@ static int mmc_suspend(struct mmc_host *host)
 		if (!err)
 			mmc_card_set_sleep(host->card);
 	} else if (!mmc_host_is_spi(host))
-		mmc_deselect_cards(host);
+		err = mmc_deselect_cards(host);
 	host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
 	mmc_release_host(host);
 
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index c272c686..b2b43f6 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -1075,16 +1075,18 @@ static void mmc_sd_detect(struct mmc_host *host)
  */
 static int mmc_sd_suspend(struct mmc_host *host)
 {
+	int err = 0;
+
 	BUG_ON(!host);
 	BUG_ON(!host->card);
 
 	mmc_claim_host(host);
 	if (!mmc_host_is_spi(host))
-		mmc_deselect_cards(host);
+		err = mmc_deselect_cards(host);
 	host->card->state &= ~MMC_STATE_HIGHSPEED;
 	mmc_release_host(host);
 
-	return 0;
+	return err;
 }
 
 /*
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 13d0e95..41c5fd8 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -218,6 +218,12 @@ static int sdio_enable_wide(struct mmc_card *card)
 	if (ret)
 		return ret;
 
+	if ((ctrl & SDIO_BUS_WIDTH_MASK) == SDIO_BUS_WIDTH_RESERVED)
+		pr_warning("%s: SDIO_CCCR_IF is invalid: 0x%02x\n",
+			   mmc_hostname(card->host), ctrl);
+
+	/* set as 4-bit bus width */
+	ctrl &= ~SDIO_BUS_WIDTH_MASK;
 	ctrl |= SDIO_BUS_WIDTH_4BIT;
 
 	ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h
index 787aba1..ab56f7d 100644
--- a/drivers/mmc/host/atmel-mci-regs.h
+++ b/drivers/mmc/host/atmel-mci-regs.h
@@ -140,4 +140,18 @@
 #define atmci_writel(port,reg,value)			\
 	__raw_writel((value), (port)->regs + reg)
 
+/*
+ * Fix sconfig's burst size according to atmel MCI. We need to convert them as:
+ * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3.
+ *
+ * This can be done by finding most significant bit set.
+ */
+static inline unsigned int atmci_convert_chksize(unsigned int maxburst)
+{
+	if (maxburst > 1)
+		return fls(maxburst) - 2;
+	else
+		return 0;
+}
+
 #endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 420aca6..f2c115e 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -910,6 +910,7 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data)
 	enum dma_data_direction		direction;
 	enum dma_transfer_direction	slave_dirn;
 	unsigned int			sglen;
+	u32				maxburst;
 	u32 iflags;
 
 	data->error = -EINPROGRESS;
@@ -943,17 +944,18 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data)
 	if (!chan)
 		return -ENODEV;
 
-	if (host->caps.has_dma)
-		atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(3) | ATMCI_DMAEN);
-
 	if (data->flags & MMC_DATA_READ) {
 		direction = DMA_FROM_DEVICE;
 		host->dma_conf.direction = slave_dirn = DMA_DEV_TO_MEM;
+		maxburst = atmci_convert_chksize(host->dma_conf.src_maxburst);
 	} else {
 		direction = DMA_TO_DEVICE;
 		host->dma_conf.direction = slave_dirn = DMA_MEM_TO_DEV;
+		maxburst = atmci_convert_chksize(host->dma_conf.dst_maxburst);
 	}
 
+	atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(maxburst) | ATMCI_DMAEN);
+
 	sglen = dma_map_sg(chan->device->dev, data->sg,
 			data->sg_len, direction);
 
@@ -2314,6 +2316,8 @@ static int __init atmci_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, host);
 
+	setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host);
+
 	/* We need at least one slot to succeed */
 	nr_slots = 0;
 	ret = -ENODEV;
@@ -2352,8 +2356,6 @@ static int __init atmci_probe(struct platform_device *pdev)
 		}
 	}
 
-	setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host);
-
 	dev_info(&pdev->dev,
 			"Atmel MCI controller at 0x%08lx irq %d, %u slots\n",
 			host->mapbase, irq, nr_slots);
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 9bbf45f..1ca5e72 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -418,6 +418,8 @@ static int dw_mci_idmac_init(struct dw_mci *host)
 	p->des3 = host->sg_dma;
 	p->des0 = IDMAC_DES0_ER;
 
+	mci_writel(host, BMOD, SDMMC_IDMAC_SWRESET);
+
 	/* Mask out interrupts - get Tx & Rx complete only */
 	mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI | SDMMC_IDMAC_INT_RI |
 		   SDMMC_IDMAC_INT_TI);
@@ -615,14 +617,15 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot)
 	u32 div;
 
 	if (slot->clock != host->current_speed) {
-		if (host->bus_hz % slot->clock)
+		div = host->bus_hz / slot->clock;
+		if (host->bus_hz % slot->clock && host->bus_hz > slot->clock)
 			/*
 			 * move the + 1 after the divide to prevent
 			 * over-clocking the card.
 			 */
-			div = ((host->bus_hz / slot->clock) >> 1) + 1;
-		else
-			div = (host->bus_hz  / slot->clock) >> 1;
+			div += 1;
+
+		div = (host->bus_hz != slot->clock) ? DIV_ROUND_UP(div, 2) : 0;
 
 		dev_info(&slot->mmc->class_dev,
 			 "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ"
@@ -939,8 +942,8 @@ static void dw_mci_command_complete(struct dw_mci *host, struct mmc_command *cmd
 			mdelay(20);
 
 		if (cmd->data) {
-			host->data = NULL;
 			dw_mci_stop_dma(host);
+			host->data = NULL;
 		}
 	}
 }
@@ -1623,7 +1626,6 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
 	if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
 		mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI);
 		mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
-		set_bit(EVENT_DATA_COMPLETE, &host->pending_events);
 		host->dma_ops->complete(host);
 	}
 #endif
@@ -1725,7 +1727,8 @@ static void dw_mci_work_routine_card(struct work_struct *work)
 
 #ifdef CONFIG_MMC_DW_IDMAC
 				ctrl = mci_readl(host, BMOD);
-				ctrl |= 0x01; /* Software reset of DMA */
+				/* Software reset of DMA */
+				ctrl |= SDMMC_IDMAC_SWRESET;
 				mci_writel(host, BMOD, ctrl);
 #endif
 
@@ -1950,10 +1953,6 @@ int dw_mci_probe(struct dw_mci *host)
 	spin_lock_init(&host->lock);
 	INIT_LIST_HEAD(&host->queue);
 
-
-	host->dma_ops = host->pdata->dma_ops;
-	dw_mci_init_dma(host);
-
 	/*
 	 * Get the host data width - this assumes that HCON has been set with
 	 * the correct values.
@@ -1981,10 +1980,11 @@ int dw_mci_probe(struct dw_mci *host)
 	}
 
 	/* Reset all blocks */
-	if (!mci_wait_reset(&host->dev, host)) {
-		ret = -ENODEV;
-		goto err_dmaunmap;
-	}
+	if (!mci_wait_reset(&host->dev, host))
+		return -ENODEV;
+
+	host->dma_ops = host->pdata->dma_ops;
+	dw_mci_init_dma(host);
 
 	/* Clear the interrupts for the host controller */
 	mci_writel(host, RINTSTS, 0xFFFFFFFF);
@@ -2170,14 +2170,14 @@ int dw_mci_resume(struct dw_mci *host)
 	if (host->vmmc)
 		regulator_enable(host->vmmc);
 
-	if (host->dma_ops->init)
-		host->dma_ops->init(host);
-
 	if (!mci_wait_reset(&host->dev, host)) {
 		ret = -ENODEV;
 		return ret;
 	}
 
+	if (host->dma_ops->init)
+		host->dma_ops->init(host);
+
 	/* Restore the old value at FIFOTH register */
 	mci_writel(host, FIFOTH, host->fifoth_val);
 
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index f0fcce4..50ff19a 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1216,12 +1216,7 @@ static void mmci_dt_populate_generic_pdata(struct device_node *np,
 	int bus_width = 0;
 
 	pdata->gpio_wp = of_get_named_gpio(np, "wp-gpios", 0);
-	if (!pdata->gpio_wp)
-		pdata->gpio_wp = -1;
-
 	pdata->gpio_cd = of_get_named_gpio(np, "cd-gpios", 0);
-	if (!pdata->gpio_cd)
-		pdata->gpio_cd = -1;
 
 	if (of_get_property(np, "cd-inverted", NULL))
 		pdata->cd_invert = true;
@@ -1276,6 +1271,12 @@ static int __devinit mmci_probe(struct amba_device *dev,
 		return -EINVAL;
 	}
 
+	if (!plat) {
+		plat = devm_kzalloc(&dev->dev, sizeof(*plat), GFP_KERNEL);
+		if (!plat)
+			return -ENOMEM;
+	}
+
 	if (np)
 		mmci_dt_populate_generic_pdata(np, plat);
 
@@ -1424,6 +1425,10 @@ static int __devinit mmci_probe(struct amba_device *dev,
 	writel(0, host->base + MMCIMASK1);
 	writel(0xfff, host->base + MMCICLEAR);
 
+	if (plat->gpio_cd == -EPROBE_DEFER) {
+		ret = -EPROBE_DEFER;
+		goto err_gpio_cd;
+	}
 	if (gpio_is_valid(plat->gpio_cd)) {
 		ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)");
 		if (ret == 0)
@@ -1447,6 +1452,10 @@ static int __devinit mmci_probe(struct amba_device *dev,
 		if (ret >= 0)
 			host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd);
 	}
+	if (plat->gpio_wp == -EPROBE_DEFER) {
+		ret = -EPROBE_DEFER;
+		goto err_gpio_wp;
+	}
 	if (gpio_is_valid(plat->gpio_wp)) {
 		ret = gpio_request(plat->gpio_wp, DRIVER_NAME " (wp)");
 		if (ret == 0)
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 34a9026..277161d2 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -894,8 +894,8 @@ static struct platform_driver mxs_mmc_driver = {
 		.owner	= THIS_MODULE,
 #ifdef CONFIG_PM
 		.pm	= &mxs_mmc_pm_ops,
-		.of_match_table = mxs_mmc_dt_ids,
 #endif
+		.of_match_table = mxs_mmc_dt_ids,
 	},
 };
 
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 552196c..3e8dcf8 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1300,7 +1300,7 @@ static const struct mmc_host_ops mmc_omap_ops = {
 	.set_ios	= mmc_omap_set_ios,
 };
 
-static int __init mmc_omap_new_slot(struct mmc_omap_host *host, int id)
+static int __devinit mmc_omap_new_slot(struct mmc_omap_host *host, int id)
 {
 	struct mmc_omap_slot *slot = NULL;
 	struct mmc_host *mmc;
@@ -1485,24 +1485,26 @@ static int __devinit mmc_omap_probe(struct platform_device *pdev)
 	}
 
 	host->nr_slots = pdata->nr_slots;
+	host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
+
+	host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0);
+	if (!host->mmc_omap_wq)
+		goto err_plat_cleanup;
+
 	for (i = 0; i < pdata->nr_slots; i++) {
 		ret = mmc_omap_new_slot(host, i);
 		if (ret < 0) {
 			while (--i >= 0)
 				mmc_omap_remove_slot(host->slots[i]);
 
-			goto err_plat_cleanup;
+			goto err_destroy_wq;
 		}
 	}
 
-	host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
-
-	host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0);
-	if (!host->mmc_omap_wq)
-		goto err_plat_cleanup;
-
 	return 0;
 
+err_destroy_wq:
+	destroy_workqueue(host->mmc_omap_wq);
 err_plat_cleanup:
 	if (pdata->cleanup)
 		pdata->cleanup(&pdev->dev);
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 9a7a60a..389a3ee 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -85,7 +85,6 @@
 #define BRR_ENABLE		(1 << 5)
 #define DTO_ENABLE		(1 << 20)
 #define INIT_STREAM		(1 << 1)
-#define ACEN_ACMD12		(1 << 2)
 #define DP_SELECT		(1 << 21)
 #define DDIR			(1 << 4)
 #define DMA_EN			0x1
@@ -117,7 +116,6 @@
 #define OMAP_MMC_MAX_CLOCK	52000000
 #define DRIVER_NAME		"omap_hsmmc"
 
-#define AUTO_CMD12		(1 << 0)	/* Auto CMD12 support */
 /*
  * One controller can have multiple slots, like on some omap boards using
  * omap.c controller driver. Luckily this is not currently done on any known
@@ -177,7 +175,6 @@ struct omap_hsmmc_host {
 	int			reqs_blocked;
 	int			use_reg;
 	int			req_in_progress;
-	unsigned int		flags;
 	struct omap_hsmmc_next	next_data;
 
 	struct	omap_mmc_platform_data	*pdata;
@@ -773,8 +770,6 @@ omap_hsmmc_start_command(struct omap_hsmmc_host *host, struct mmc_command *cmd,
 		cmdtype = 0x3;
 
 	cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22);
-	if ((host->flags & AUTO_CMD12) && mmc_op_multi(cmd->opcode))
-		cmdreg |= ACEN_ACMD12;
 
 	if (data) {
 		cmdreg |= DP_SELECT | MSBS | BCE;
@@ -847,14 +842,11 @@ omap_hsmmc_xfer_done(struct omap_hsmmc_host *host, struct mmc_data *data)
 	else
 		data->bytes_xfered = 0;
 
-	if (data->stop && ((!(host->flags & AUTO_CMD12)) || data->error)) {
-		omap_hsmmc_start_command(host, data->stop, NULL);
-	} else {
-		if (data->stop)
-			data->stop->resp[0] = OMAP_HSMMC_READ(host->base,
-							RSP76);
+	if (!data->stop) {
 		omap_hsmmc_request_done(host, data->mrq);
+		return;
 	}
+	omap_hsmmc_start_command(host, data->stop, NULL);
 }
 
 /*
@@ -1859,7 +1851,6 @@ static int __devinit omap_hsmmc_probe(struct platform_device *pdev)
 	host->mapbase	= res->start + pdata->reg_offset;
 	host->base	= ioremap(host->mapbase, SZ_4K);
 	host->power_mode = MMC_POWER_OFF;
-	host->flags	= AUTO_CMD12;
 	host->next_data.cookie = 1;
 
 	platform_set_drvdata(pdev, host);
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 55a164f..a50c205 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -404,7 +404,7 @@ static void sdhci_s3c_setup_card_detect_gpio(struct sdhci_s3c *sc)
 		if (sc->ext_cd_irq &&
 		    request_threaded_irq(sc->ext_cd_irq, NULL,
 					 sdhci_s3c_gpio_card_detect_thread,
-					 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+					 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 					 dev_name(dev), sc) == 0) {
 			int status = gpio_get_value(sc->ext_cd_gpio);
 			if (pdata->ext_cd_gpio_invert)
diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c
index 1fe32df..423da81 100644
--- a/drivers/mmc/host/sdhci-spear.c
+++ b/drivers/mmc/host/sdhci-spear.c
@@ -4,7 +4,7 @@
  * Support of SDHCI platform devices for spear soc family
  *
  * Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
  *
  * Inspired by sdhci-pltfm.c
  *
@@ -289,5 +289,5 @@ static struct platform_driver sdhci_driver = {
 module_platform_driver(sdhci_driver);
 
 MODULE_DESCRIPTION("SPEAr Secure Digital Host Controller Interface driver");
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index e626732..f4b8b4d 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -680,8 +680,8 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
 	}
 
 	if (count >= 0xF) {
-		pr_warning("%s: Too large timeout 0x%x requested for CMD%d!\n",
-			   mmc_hostname(host->mmc), count, cmd->opcode);
+		DBG("%s: Too large timeout 0x%x requested for CMD%d!\n",
+		    mmc_hostname(host->mmc), count, cmd->opcode);
 		count = 0xE;
 	}