diff options
author | Robert Jarzmik <robert.jarzmik@free.fr> | 2011-11-19 15:02:52 (GMT) |
---|---|---|
committer | David Woodhouse <David.Woodhouse@intel.com> | 2012-01-09 18:07:23 (GMT) |
commit | fb50b58e488d5fb3e3600592646909ddad7bd1e5 (patch) | |
tree | 5f99348d36ebc0b93460611045fd31ea07777000 /drivers/mtd/devices/docg3.c | |
parent | 316e627edcd8186f199120931f5381615a0d9aa4 (diff) | |
download | linux-fsl-qoriq-fb50b58e488d5fb3e3600592646909ddad7bd1e5.tar.xz |
mtd: docg3: add write functions
Add write capability to the docg3 driver. The writes are
possible on a single page (512 bytes + 16 bytes), even if
that page is split on 2 physical pages on 2 blocks (each on
one plane).
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com>
Reviewed-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Diffstat (limited to 'drivers/mtd/devices/docg3.c')
-rw-r--r-- | drivers/mtd/devices/docg3.c | 553 |
1 files changed, 541 insertions, 12 deletions
diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c index 27c4fea..fd4d47b 100644 --- a/drivers/mtd/devices/docg3.c +++ b/drivers/mtd/devices/docg3.c @@ -254,6 +254,40 @@ static void doc_read_data_area(struct docg3 *docg3, void *buf, int len, } /** + * doc_write_data_area - Write data into data area + * @docg3: the device + * @buf: the buffer to get input bytes from + * @len: the length to write + * + * Writes bytes into flash data. Handles the single byte / even bytes writes. + */ +static void doc_write_data_area(struct docg3 *docg3, const void *buf, int len) +{ + int i, cdr, len4; + u16 *src16; + u8 *src8; + + doc_dbg("doc_write_data_area(buf=%p, len=%d)\n", buf, len); + cdr = len & 0x3; + len4 = len - cdr; + + doc_writew(docg3, DOC_IOSPACE_DATA, DOC_READADDRESS); + src16 = (u16 *)buf; + for (i = 0; i < len4; i += 2) { + doc_writew(docg3, *src16, DOC_IOSPACE_DATA); + src16++; + } + + src8 = (u8 *)src16; + for (i = 0; i < cdr; i++) { + doc_writew(docg3, DOC_IOSPACE_DATA | DOC_READADDR_ONE_BYTE, + DOC_READADDRESS); + doc_writeb(docg3, *src8, DOC_IOSPACE_DATA); + src8++; + } +} + +/** * doc_set_data_mode - Sets the flash to reliable data mode * @docg3: the device * @@ -343,6 +377,37 @@ static int doc_set_extra_page_mode(struct docg3 *docg3) } /** + * doc_setup_addr_sector - Setup blocks/page/ofs address for one plane + * @docg3: the device + * @sector: the sector + */ +static void doc_setup_addr_sector(struct docg3 *docg3, int sector) +{ + doc_delay(docg3, 1); + doc_flash_address(docg3, sector & 0xff); + doc_flash_address(docg3, (sector >> 8) & 0xff); + doc_flash_address(docg3, (sector >> 16) & 0xff); + doc_delay(docg3, 1); +} + +/** + * doc_setup_writeaddr_sector - Setup blocks/page/ofs address for one plane + * @docg3: the device + * @sector: the sector + * @ofs: the offset in the page, between 0 and (512 + 16 + 512) + */ +static void doc_setup_writeaddr_sector(struct docg3 *docg3, int sector, int ofs) +{ + ofs = ofs >> 2; + doc_delay(docg3, 1); + doc_flash_address(docg3, ofs & 0xff); + doc_flash_address(docg3, sector & 0xff); + doc_flash_address(docg3, (sector >> 8) & 0xff); + doc_flash_address(docg3, (sector >> 16) & 0xff); + doc_delay(docg3, 1); +} + +/** * doc_seek - Set both flash planes to the specified block, page for reading * @docg3: the device * @block0: the first plane block index @@ -378,27 +443,73 @@ static int doc_read_seek(struct docg3 *docg3, int block0, int block1, int page, if (ret) goto out; - sector = (block0 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK); doc_flash_sequence(docg3, DOC_SEQ_READ); + sector = (block0 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK); doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR); - doc_delay(docg3, 1); - doc_flash_address(docg3, sector & 0xff); - doc_flash_address(docg3, (sector >> 8) & 0xff); - doc_flash_address(docg3, (sector >> 16) & 0xff); - doc_delay(docg3, 1); + doc_setup_addr_sector(docg3, sector); sector = (block1 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK); doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR); + doc_setup_addr_sector(docg3, sector); doc_delay(docg3, 1); - doc_flash_address(docg3, sector & 0xff); - doc_flash_address(docg3, (sector >> 8) & 0xff); - doc_flash_address(docg3, (sector >> 16) & 0xff); + +out: + return ret; +} + +/** + * doc_write_seek - Set both flash planes to the specified block, page for writing + * @docg3: the device + * @block0: the first plane block index + * @block1: the second plane block index + * @page: the page index within the block + * @ofs: offset in page to write + * + * Programs the flash even and odd planes to the specific block and page. + * Alternatively, programs the flash to the wear area of the specified page. + */ +static int doc_write_seek(struct docg3 *docg3, int block0, int block1, int page, + int ofs) +{ + int ret = 0, sector; + + doc_dbg("doc_write_seek(blocks=(%d,%d), page=%d, ofs=%d)\n", + block0, block1, page, ofs); + + doc_set_reliable_mode(docg3); + + if (ofs < 2 * DOC_LAYOUT_PAGE_SIZE) { + doc_flash_sequence(docg3, DOC_SEQ_SET_PLANE1); + doc_flash_command(docg3, DOC_CMD_READ_PLANE1); + doc_delay(docg3, 2); + } else { + doc_flash_sequence(docg3, DOC_SEQ_SET_PLANE2); + doc_flash_command(docg3, DOC_CMD_READ_PLANE2); + doc_delay(docg3, 2); + } + + doc_flash_sequence(docg3, DOC_SEQ_PAGE_SETUP); + doc_flash_command(docg3, DOC_CMD_PROG_CYCLE1); + + sector = (block0 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK); + doc_setup_writeaddr_sector(docg3, sector, ofs); + + doc_flash_command(docg3, DOC_CMD_PROG_CYCLE3); doc_delay(docg3, 2); + ret = doc_wait_ready(docg3); + if (ret) + goto out; + + doc_flash_command(docg3, DOC_CMD_PROG_CYCLE1); + sector = (block1 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK); + doc_setup_writeaddr_sector(docg3, sector, ofs); + doc_delay(docg3, 1); out: return ret; } + /** * doc_read_page_ecc_init - Initialize hardware ECC engine * @docg3: the device @@ -421,6 +532,58 @@ static int doc_read_page_ecc_init(struct docg3 *docg3, int len) } /** + * doc_write_page_ecc_init - Initialize hardware BCH ECC engine + * @docg3: the device + * @len: the number of bytes covered by the ECC (BCH covered) + * + * The function does initialize the hardware ECC engine to compute the Hamming + * ECC (on 1 byte) and the BCH Syndroms (on 7 bytes). + * + * Return 0 if succeeded, -EIO on error + */ +static int doc_write_page_ecc_init(struct docg3 *docg3, int len) +{ + doc_writew(docg3, !DOC_ECCCONF0_READ_MODE + | DOC_ECCCONF0_BCH_ENABLE | DOC_ECCCONF0_HAMMING_ENABLE + | (len & DOC_ECCCONF0_DATA_BYTES_MASK), + DOC_ECCCONF0); + doc_delay(docg3, 4); + doc_register_readb(docg3, DOC_FLASHCONTROL); + return doc_wait_ready(docg3); +} + +/** + * doc_ecc_disable - Disable Hamming and BCH ECC hardware calculator + * @docg3: the device + * + * Disables the hardware ECC generator and checker, for unchecked reads (as when + * reading OOB only or write status byte). + */ +static void doc_ecc_disable(struct docg3 *docg3) +{ + doc_writew(docg3, DOC_ECCCONF0_READ_MODE, DOC_ECCCONF0); + doc_delay(docg3, 4); +} + +/** + * doc_hamming_ecc_init - Initialize hardware Hamming ECC engine + * @docg3: the device + * @nb_bytes: the number of bytes covered by the ECC (Hamming covered) + * + * This function programs the ECC hardware to compute the hamming code on the + * last provided N bytes to the hardware generator. + */ +static void doc_hamming_ecc_init(struct docg3 *docg3, int nb_bytes) +{ + u8 ecc_conf1; + + ecc_conf1 = doc_register_readb(docg3, DOC_ECCCONF1); + ecc_conf1 &= ~DOC_ECCCONF1_HAMMING_BITS_MASK; + ecc_conf1 |= (nb_bytes & DOC_ECCCONF1_HAMMING_BITS_MASK); + doc_writeb(docg3, ecc_conf1, DOC_ECCCONF1); +} + +/** * doc_read_page_prepare - Prepares reading data from a flash page * @docg3: the device * @block0: the first plane block index on flash memory @@ -506,11 +669,25 @@ static int doc_read_page_getbytes(struct docg3 *docg3, int len, u_char *buf, } /** + * doc_write_page_putbytes - Writes bytes into a prepared page + * @docg3: the device + * @len: the number of bytes to be written + * @buf: the buffer of input bytes + * + */ +static void doc_write_page_putbytes(struct docg3 *docg3, int len, + const u_char *buf) +{ + doc_write_data_area(docg3, buf, len); + doc_delay(docg3, 2); +} + +/** * doc_get_hw_bch_syndroms - Get hardware calculated BCH syndroms * @docg3: the device * @syns: the array of 7 integers where the syndroms will be stored */ -static void doc_get_hw_bch_syndroms(struct docg3 *docg3, int *syns) +static void doc_get_hw_bch_syndroms(struct docg3 *docg3, u8 *syns) { int i; @@ -519,6 +696,16 @@ static void doc_get_hw_bch_syndroms(struct docg3 *docg3, int *syns) } /** + * doc_page_finish - Ends reading/writing of a flash page + * @docg3: the device + */ +static void doc_page_finish(struct docg3 *docg3) +{ + doc_writeb(docg3, 0, DOC_DATAEND); + doc_delay(docg3, 2); +} + +/** * doc_read_page_finish - Ends reading of a flash page * @docg3: the device * @@ -528,8 +715,7 @@ static void doc_get_hw_bch_syndroms(struct docg3 *docg3, int *syns) */ static void doc_read_page_finish(struct docg3 *docg3) { - doc_writeb(docg3, 0, DOC_DATAEND); - doc_delay(docg3, 2); + doc_page_finish(docg3); doc_set_device_id(docg3, 0); } @@ -791,6 +977,348 @@ static int doc_get_erase_count(struct docg3 *docg3, loff_t from) return max(plane1_erase_count, plane2_erase_count); } +/** + * doc_get_op_status - get erase/write operation status + * @docg3: the device + * + * Queries the status from the chip, and returns it + * + * Returns the status (bits DOC_PLANES_STATUS_*) + */ +static int doc_get_op_status(struct docg3 *docg3) +{ + u8 status; + + doc_flash_sequence(docg3, DOC_SEQ_PLANES_STATUS); + doc_flash_command(docg3, DOC_CMD_PLANES_STATUS); + doc_delay(docg3, 5); + + doc_ecc_disable(docg3); + doc_read_data_area(docg3, &status, 1, 1); + return status; +} + +/** + * doc_write_erase_wait_status - wait for write or erase completion + * @docg3: the device + * + * Wait for the chip to be ready again after erase or write operation, and check + * erase/write status. + * + * Returns 0 if erase successfull, -EIO if erase/write issue, -ETIMEOUT if + * timeout + */ +static int doc_write_erase_wait_status(struct docg3 *docg3) +{ + int status, ret = 0; + + if (!doc_is_ready(docg3)) + usleep_range(3000, 3000); + if (!doc_is_ready(docg3)) { + doc_dbg("Timeout reached and the chip is still not ready\n"); + ret = -EAGAIN; + goto out; + } + + status = doc_get_op_status(docg3); + if (status & DOC_PLANES_STATUS_FAIL) { + doc_dbg("Erase/Write failed on (a) plane(s), status = %x\n", + status); + ret = -EIO; + } + +out: + doc_page_finish(docg3); + return ret; +} + +/** + * doc_write_page - Write a single page to the chip + * @docg3: the device + * @to: the offset from first block and first page, in bytes, aligned on page + * size + * @buf: buffer to get bytes from + * @oob: buffer to get out of band bytes from (can be NULL if no OOB should be + * written) + * @autoecc: if 0, all 16 bytes from OOB are taken, regardless of HW Hamming or + * BCH computations. If 1, only bytes 0-7 and byte 15 are taken, + * remaining ones are filled with hardware Hamming and BCH + * computations. Its value is not meaningfull is oob == NULL. + * + * Write one full page (ie. 1 page split on two planes), of 512 bytes, with the + * OOB data. The OOB ECC is automatically computed by the hardware Hamming and + * BCH generator if autoecc is not null. + * + * Returns 0 if write successful, -EIO if write error, -EAGAIN if timeout + */ +static int doc_write_page(struct docg3 *docg3, loff_t to, const u_char *buf, + const u_char *oob, int autoecc) +{ + int block0, block1, page, ret, ofs = 0; + u8 syn[DOC_ECC_BCH_SIZE], hamming; + + doc_dbg("doc_write_page(to=%lld)\n", to); + calc_block_sector(to, &block0, &block1, &page, &ofs); + + doc_set_device_id(docg3, docg3->device_id); + ret = doc_reset_seq(docg3); + if (ret) + goto err; + + /* Program the flash address block and page */ + ret = doc_write_seek(docg3, block0, block1, page, ofs); + if (ret) + goto err; + + doc_write_page_ecc_init(docg3, DOC_ECC_BCH_COVERED_BYTES); + doc_delay(docg3, 2); + doc_write_page_putbytes(docg3, DOC_LAYOUT_PAGE_SIZE, buf); + + if (oob && autoecc) { + doc_write_page_putbytes(docg3, DOC_LAYOUT_OOB_PAGEINFO_SZ, oob); + doc_delay(docg3, 2); + oob += DOC_LAYOUT_OOB_UNUSED_OFS; + + hamming = doc_register_readb(docg3, DOC_HAMMINGPARITY); + doc_delay(docg3, 2); + doc_write_page_putbytes(docg3, DOC_LAYOUT_OOB_HAMMING_SZ, + &hamming); + doc_delay(docg3, 2); + + doc_get_hw_bch_syndroms(docg3, syn); + doc_write_page_putbytes(docg3, DOC_LAYOUT_OOB_BCH_SZ, syn); + doc_delay(docg3, 2); + + doc_write_page_putbytes(docg3, DOC_LAYOUT_OOB_UNUSED_SZ, oob); + } + if (oob && !autoecc) + doc_write_page_putbytes(docg3, DOC_LAYOUT_OOB_SIZE, oob); + + doc_delay(docg3, 2); + doc_page_finish(docg3); + doc_delay(docg3, 2); + doc_flash_command(docg3, DOC_CMD_PROG_CYCLE2); + doc_delay(docg3, 2); + + /* + * The wait status will perform another doc_page_finish() call, but that + * seems to please the docg3, so leave it. + */ + ret = doc_write_erase_wait_status(docg3); + return ret; +err: + doc_read_page_finish(docg3); + return ret; +} + +/** + * doc_guess_autoecc - Guess autoecc mode from mbd_oob_ops + * @ops: the oob operations + * + * Returns 0 or 1 if success, -EINVAL if invalid oob mode + */ +static int doc_guess_autoecc(struct mtd_oob_ops *ops) +{ + int autoecc; + + switch (ops->mode) { + case MTD_OPS_PLACE_OOB: + case MTD_OPS_AUTO_OOB: + autoecc = 1; + break; + case MTD_OPS_RAW: + autoecc = 0; + break; + default: + autoecc = -EINVAL; + } + return autoecc; +} + +/** + * doc_fill_autooob - Fill a 16 bytes OOB from 8 non-ECC bytes + * @dst: the target 16 bytes OOB buffer + * @oobsrc: the source 8 bytes non-ECC OOB buffer + * + */ +static void doc_fill_autooob(u8 *dst, u8 *oobsrc) +{ + memcpy(dst, oobsrc, DOC_LAYOUT_OOB_PAGEINFO_SZ); + dst[DOC_LAYOUT_OOB_UNUSED_OFS] = oobsrc[DOC_LAYOUT_OOB_PAGEINFO_SZ]; +} + +/** + * doc_backup_oob - Backup OOB into docg3 structure + * @docg3: the device + * @to: the page offset in the chip + * @ops: the OOB size and buffer + * + * As the docg3 should write a page with its OOB in one pass, and some userland + * applications do write_oob() to setup the OOB and then write(), store the OOB + * into a temporary storage. This is very dangerous, as 2 concurrent + * applications could store an OOB, and then write their pages (which will + * result into one having its OOB corrupted). + * + * The only reliable way would be for userland to call doc_write_oob() with both + * the page data _and_ the OOB area. + * + * Returns 0 if success, -EINVAL if ops content invalid + */ +static int doc_backup_oob(struct docg3 *docg3, loff_t to, + struct mtd_oob_ops *ops) +{ + int ooblen = ops->ooblen, autoecc; + + if (ooblen != DOC_LAYOUT_OOB_SIZE) + return -EINVAL; + autoecc = doc_guess_autoecc(ops); + if (autoecc < 0) + return autoecc; + + docg3->oob_write_ofs = to; + docg3->oob_autoecc = autoecc; + if (ops->mode == MTD_OPS_AUTO_OOB) { + doc_fill_autooob(docg3->oob_write_buf, ops->oobbuf); + ops->oobretlen = 8; + } else { + memcpy(docg3->oob_write_buf, ops->oobbuf, DOC_LAYOUT_OOB_SIZE); + ops->oobretlen = DOC_LAYOUT_OOB_SIZE; + } + return 0; +} + +/** + * doc_write_oob - Write out of band bytes to flash + * @mtd: the device + * @ofs: the offset from first block and first page, in bytes, aligned on page + * size + * @ops: the mtd oob structure + * + * Either write OOB data into a temporary buffer, for the subsequent write + * page. The provided OOB should be 16 bytes long. If a data buffer is provided + * as well, issue the page write. + * Or provide data without OOB, and then a all zeroed OOB will be used (ECC will + * still be filled in if asked for). + * + * Returns 0 is successfull, EINVAL if length is not 14 bytes + */ +static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, + struct mtd_oob_ops *ops) +{ + struct docg3 *docg3 = mtd->priv; + int block0, block1, page, ret, pofs = 0, autoecc, oobdelta; + u8 *oobbuf = ops->oobbuf; + u8 *buf = ops->datbuf; + size_t len, ooblen; + u8 oob[DOC_LAYOUT_OOB_SIZE]; + + if (buf) + len = ops->len; + else + len = 0; + if (oobbuf) + ooblen = ops->ooblen; + else + ooblen = 0; + + if (oobbuf && ops->mode == MTD_OPS_PLACE_OOB) + oobbuf += ops->ooboffs; + + doc_dbg("doc_write_oob(from=%lld, mode=%d, data=(%p:%zu), oob=(%p:%zu))\n", + ofs, ops->mode, buf, len, oobbuf, ooblen); + switch (ops->mode) { + case MTD_OPS_PLACE_OOB: + case MTD_OPS_RAW: + oobdelta = mtd->oobsize; + break; + case MTD_OPS_AUTO_OOB: + oobdelta = mtd->ecclayout->oobavail; + break; + default: + oobdelta = 0; + } + if ((len % DOC_LAYOUT_PAGE_SIZE) || (ooblen % oobdelta) || + (ofs % DOC_LAYOUT_PAGE_SIZE)) + return -EINVAL; + if (len && ooblen && + (len / DOC_LAYOUT_PAGE_SIZE) != (ooblen / oobdelta)) + return -EINVAL; + + ret = -EINVAL; + calc_block_sector(ofs + len, &block0, &block1, &page, &pofs); + if (block1 > docg3->max_block) + goto err; + + ops->oobretlen = 0; + ops->retlen = 0; + ret = 0; + if (len == 0 && ooblen == 0) + return -EINVAL; + if (len == 0 && ooblen > 0) + return doc_backup_oob(docg3, ofs, ops); + + autoecc = doc_guess_autoecc(ops); + if (autoecc < 0) + return autoecc; + + while (!ret && len > 0) { + memset(oob, 0, sizeof(oob)); + if (ofs == docg3->oob_write_ofs) + memcpy(oob, docg3->oob_write_buf, DOC_LAYOUT_OOB_SIZE); + else if (ooblen > 0 && ops->mode == MTD_OPS_AUTO_OOB) + doc_fill_autooob(oob, oobbuf); + else if (ooblen > 0) + memcpy(oob, oobbuf, DOC_LAYOUT_OOB_SIZE); + ret = doc_write_page(docg3, ofs, buf, oob, autoecc); + + ofs += DOC_LAYOUT_PAGE_SIZE; + len -= DOC_LAYOUT_PAGE_SIZE; + buf += DOC_LAYOUT_PAGE_SIZE; + if (ooblen) { + oobbuf += oobdelta; + ooblen -= oobdelta; + ops->oobretlen += oobdelta; + } + ops->retlen += DOC_LAYOUT_PAGE_SIZE; + } +err: + doc_set_device_id(docg3, 0); + return ret; +} + +/** + * doc_write - Write a buffer to the chip + * @mtd: the device + * @to: the offset from first block and first page, in bytes, aligned on page + * size + * @len: the number of bytes to write (must be a full page size, ie. 512) + * @retlen: the number of bytes actually written (0 or 512) + * @buf: the buffer to get bytes from + * + * Writes data to the chip. + * + * Returns 0 if write successful, -EIO if write error + */ +static int doc_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) +{ + struct docg3 *docg3 = mtd->priv; + int ret; + struct mtd_oob_ops ops; + + doc_dbg("doc_write(to=%lld, len=%zu)\n", to, len); + ops.datbuf = (char *)buf; + ops.len = len; + ops.mode = MTD_OPS_PLACE_OOB; + ops.oobbuf = NULL; + ops.ooblen = 0; + ops.ooboffs = 0; + + ret = doc_write_oob(mtd, to, &ops); + *retlen = ops.retlen; + return ret; +} + /* * Debug sysfs entries */ @@ -1052,6 +1580,7 @@ static struct mtd_info *doc_probe_device(void __iomem *base, int floor, doc_set_driver_info(chip_id, mtd); + doc_hamming_ecc_init(docg3, DOC_LAYOUT_OOB_PAGEINFO_SZ); doc_reload_bbt(docg3); return mtd; |