diff options
author | Jeff Garzik <jgarzik@pobox.com> | 2005-08-29 20:40:27 (GMT) |
---|---|---|
committer | Jeff Garzik <jgarzik@pobox.com> | 2005-08-29 20:40:27 (GMT) |
commit | c1b054d03f5b31c33eaa0b267c629b118eaf3790 (patch) | |
tree | 9333907ca767be24fcb3667877242976c3e3c8dd /drivers/net/Kconfig | |
parent | 559fb51ba7e66fe298b8355fabde1275b7def35f (diff) | |
parent | bf4e70e54cf31dcca48d279c7f7e71328eebe749 (diff) | |
download | linux-fsl-qoriq-c1b054d03f5b31c33eaa0b267c629b118eaf3790.tar.xz |
Merge /spare/repo/linux-2.6/
Diffstat (limited to 'drivers/net/Kconfig')
-rw-r--r-- | drivers/net/Kconfig | 71 |
1 files changed, 45 insertions, 26 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 0313af4..a6a441b 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -3,6 +3,8 @@ # Network device configuration # +menu "Network device support" + config NETDEVICES depends on NET bool "Network device support" @@ -21,9 +23,12 @@ config NETDEVICES If unsure, say Y. +# All the following symbols are dependent on NETDEVICES - do not repeat +# that for each of the symbols. +if NETDEVICES + config DUMMY tristate "Dummy net driver support" - depends on NETDEVICES ---help--- This is essentially a bit-bucket device (i.e. traffic you send to this device is consigned into oblivion) with a configurable IP @@ -43,7 +48,6 @@ config DUMMY config BONDING tristate "Bonding driver support" - depends on NETDEVICES depends on INET ---help--- Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet @@ -61,7 +65,6 @@ config BONDING config EQUALIZER tristate "EQL (serial line load balancing) support" - depends on NETDEVICES ---help--- If you have two serial connections to some other computer (this usually requires two modems and two telephone lines) and you use @@ -81,7 +84,6 @@ config EQUALIZER config TUN tristate "Universal TUN/TAP device driver support" - depends on NETDEVICES select CRC32 ---help--- TUN/TAP provides packet reception and transmission for user space @@ -105,7 +107,7 @@ config TUN config NET_SB1000 tristate "General Instruments Surfboard 1000" - depends on NETDEVICES && PNP + depends on PNP ---help--- This is a driver for the General Instrument (also known as NextLevel) SURFboard 1000 internal @@ -127,16 +129,16 @@ config NET_SB1000 If you don't have this card, of course say N. -if NETDEVICES source "drivers/net/arcnet/Kconfig" -endif + +source "drivers/net/phy/Kconfig" # # Ethernet # menu "Ethernet (10 or 100Mbit)" - depends on NETDEVICES && !UML + depends on !UML config NET_ETHERNET bool "Ethernet (10 or 100Mbit)" @@ -1135,7 +1137,7 @@ config IBMLANA config IBMVETH tristate "IBM LAN Virtual Ethernet support" - depends on NETDEVICES && NET_ETHERNET && PPC_PSERIES + depends on NET_ETHERNET && PPC_PSERIES ---help--- This driver supports virtual ethernet adapters on newer IBM iSeries and pSeries systems. @@ -1145,7 +1147,7 @@ config IBMVETH be called ibmveth. config IBM_EMAC - tristate "IBM PPC4xx EMAC driver support" + bool "IBM PPC4xx EMAC driver support" depends on 4xx select CRC32 ---help--- @@ -1154,7 +1156,7 @@ config IBM_EMAC config IBM_EMAC_ERRMSG bool "Verbose error messages" - depends on IBM_EMAC + depends on IBM_EMAC && BROKEN config IBM_EMAC_RXB int "Number of receive buffers" @@ -1320,7 +1322,7 @@ config FORCEDETH config CS89x0 tristate "CS89x0 support" - depends on NET_PCI && (ISA || ARCH_IXDP2X01) + depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105 ---help--- Support for CS89x0 chipset based Ethernet cards. If you have a network (Ethernet) card of this type, say Y and read the @@ -1488,14 +1490,14 @@ config 8139CP will be called 8139cp. This is recommended. config 8139TOO - tristate "RealTek RTL-8139 PCI Fast Ethernet Adapter support" + tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support" depends on NET_PCI && PCI select CRC32 select MII ---help--- This is a driver for the Fast Ethernet PCI network cards based on - the RTL8139 chips. If you have one of those, say Y and read - the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>. + the RTL 8129/8130/8139 chips. If you have one of those, say Y and + read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>. To compile this driver as a module, choose M here: the module will be called 8139too. This is recommended. @@ -1758,7 +1760,7 @@ endmenu # menu "Ethernet (1000 Mbit)" - depends on NETDEVICES && !UML + depends on !UML config ACENIC tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support" @@ -2089,7 +2091,7 @@ endmenu # menu "Ethernet (10000 Mbit)" - depends on NETDEVICES && !UML + depends on !UML config CHELSIO_T1 tristate "Chelsio 10Gb Ethernet support" @@ -2203,11 +2205,11 @@ source "drivers/s390/net/Kconfig" config ISERIES_VETH tristate "iSeries Virtual Ethernet driver support" - depends on NETDEVICES && PPC_ISERIES + depends on PPC_ISERIES config FDDI bool "FDDI driver support" - depends on NETDEVICES && (PCI || EISA) + depends on (PCI || EISA) help Fiber Distributed Data Interface is a high speed local area network design; essentially a replacement for high speed Ethernet. FDDI can @@ -2256,7 +2258,7 @@ config SKFP config HIPPI bool "HIPPI driver support (EXPERIMENTAL)" - depends on NETDEVICES && EXPERIMENTAL && INET && PCI + depends on EXPERIMENTAL && INET && PCI help HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and 1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI @@ -2288,7 +2290,7 @@ config ROADRUNNER_LARGE_RINGS config PLIP tristate "PLIP (parallel port) support" - depends on NETDEVICES && PARPORT + depends on PARPORT ---help--- PLIP (Parallel Line Internet Protocol) is used to create a reasonably fast mini network consisting of two (or, rarely, more) @@ -2324,7 +2326,6 @@ config PLIP config PPP tristate "PPP (point-to-point protocol) support" - depends on NETDEVICES ---help--- PPP (Point to Point Protocol) is a newer and better SLIP. It serves the same purpose: sending Internet traffic over telephone (and other @@ -2460,7 +2461,6 @@ config PPPOATM config SLIP tristate "SLIP (serial line) support" - depends on NETDEVICES ---help--- Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to connect to your Internet service provider or to connect to some @@ -2527,7 +2527,7 @@ config SLIP_MODE_SLIP6 config NET_FC bool "Fibre Channel driver support" - depends on NETDEVICES && SCSI && PCI + depends on SCSI && PCI help Fibre Channel is a high speed serial protocol mainly used to connect large storage devices to the computer; it is compatible with and @@ -2540,7 +2540,7 @@ config NET_FC config SHAPER tristate "Traffic Shaper (EXPERIMENTAL)" - depends on NETDEVICES && EXPERIMENTAL + depends on EXPERIMENTAL ---help--- The traffic shaper is a virtual network device that allows you to limit the rate of outgoing data flow over some other network device. @@ -2561,8 +2561,27 @@ config SHAPER config NETCONSOLE tristate "Network console logging support (EXPERIMENTAL)" - depends on NETDEVICES && EXPERIMENTAL + depends on EXPERIMENTAL ---help--- If you want to log kernel messages over the network, enable this. See <file:Documentation/networking/netconsole.txt> for details. +endif #NETDEVICES + +config NETPOLL + def_bool NETCONSOLE + +config NETPOLL_RX + bool "Netpoll support for trapping incoming packets" + default n + depends on NETPOLL + +config NETPOLL_TRAP + bool "Netpoll traffic trapping" + default n + depends on NETPOLL + +config NET_POLL_CONTROLLER + def_bool NETPOLL + +endmenu |