diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/arcnet/com90xx.c | |
download | linux-fsl-qoriq-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/net/arcnet/com90xx.c')
-rw-r--r-- | drivers/net/arcnet/com90xx.c | 646 |
1 files changed, 646 insertions, 0 deletions
diff --git a/drivers/net/arcnet/com90xx.c b/drivers/net/arcnet/com90xx.c new file mode 100644 index 0000000..6c2c9b9 --- /dev/null +++ b/drivers/net/arcnet/com90xx.c @@ -0,0 +1,646 @@ +/* + * Linux ARCnet driver - COM90xx chipset (memory-mapped buffers) + * + * Written 1994-1999 by Avery Pennarun. + * Written 1999 by Martin Mares <mj@ucw.cz>. + * Derived from skeleton.c by Donald Becker. + * + * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) + * for sponsoring the further development of this driver. + * + * ********************** + * + * The original copyright of skeleton.c was as follows: + * + * skeleton.c Written 1993 by Donald Becker. + * Copyright 1993 United States Government as represented by the + * Director, National Security Agency. This software may only be used + * and distributed according to the terms of the GNU General Public License as + * modified by SRC, incorporated herein by reference. + * + * ********************** + * + * For more details, see drivers/net/arcnet.c + * + * ********************** + */ +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <asm/io.h> +#include <linux/arcdevice.h> + + +#define VERSION "arcnet: COM90xx chipset support\n" + + +/* Define this to speed up the autoprobe by assuming if only one io port and + * shmem are left in the list at Stage 5, they must correspond to each + * other. + * + * This is undefined by default because it might not always be true, and the + * extra check makes the autoprobe even more careful. Speed demons can turn + * it on - I think it should be fine if you only have one ARCnet card + * installed. + * + * If no ARCnet cards are installed, this delay never happens anyway and thus + * the option has no effect. + */ +#undef FAST_PROBE + + +/* Internal function declarations */ +static int com90xx_found(int ioaddr, int airq, u_long shmem); +static void com90xx_command(struct net_device *dev, int command); +static int com90xx_status(struct net_device *dev); +static void com90xx_setmask(struct net_device *dev, int mask); +static int com90xx_reset(struct net_device *dev, int really_reset); +static void com90xx_copy_to_card(struct net_device *dev, int bufnum, int offset, + void *buf, int count); +static void com90xx_copy_from_card(struct net_device *dev, int bufnum, int offset, + void *buf, int count); + +/* Known ARCnet cards */ + +static struct net_device *cards[16]; +static int numcards; + +/* Handy defines for ARCnet specific stuff */ + +/* The number of low I/O ports used by the card */ +#define ARCNET_TOTAL_SIZE 16 + +/* Amount of I/O memory used by the card */ +#define BUFFER_SIZE (512) +#define MIRROR_SIZE (BUFFER_SIZE*4) + +/* COM 9026 controller chip --> ARCnet register addresses */ +#define _INTMASK (ioaddr+0) /* writable */ +#define _STATUS (ioaddr+0) /* readable */ +#define _COMMAND (ioaddr+1) /* writable, returns random vals on read (?) */ +#define _CONFIG (ioaddr+2) /* Configuration register */ +#define _RESET (ioaddr+8) /* software reset (on read) */ +#define _MEMDATA (ioaddr+12) /* Data port for IO-mapped memory */ +#define _ADDR_HI (ioaddr+15) /* Control registers for said */ +#define _ADDR_LO (ioaddr+14) + +#undef ASTATUS +#undef ACOMMAND +#undef AINTMASK + +#define ASTATUS() inb(_STATUS) +#define ACOMMAND(cmd) outb((cmd),_COMMAND) +#define AINTMASK(msk) outb((msk),_INTMASK) + + +static int com90xx_skip_probe __initdata = 0; + +/* Module parameters */ + +static int io; /* use the insmod io= irq= shmem= options */ +static int irq; +static int shmem; +static char device[9]; /* use eg. device=arc1 to change name */ + +module_param(io, int, 0); +module_param(irq, int, 0); +module_param(shmem, int, 0); +module_param_string(device, device, sizeof(device), 0); + +static void __init com90xx_probe(void) +{ + int count, status, ioaddr, numprint, airq, openparen = 0; + unsigned long airqmask; + int ports[(0x3f0 - 0x200) / 16 + 1] = + {0}; + u_long shmems[(0xFF800 - 0xA0000) / 2048 + 1] = + {0}; + int numports, numshmems, *port; + u_long *p; + + if (!io && !irq && !shmem && !*device && com90xx_skip_probe) + return; + + BUGLVL(D_NORMAL) printk(VERSION); + + /* set up the arrays where we'll store the possible probe addresses */ + numports = numshmems = 0; + if (io) + ports[numports++] = io; + else + for (count = 0x200; count <= 0x3f0; count += 16) + ports[numports++] = count; + if (shmem) + shmems[numshmems++] = shmem; + else + for (count = 0xA0000; count <= 0xFF800; count += 2048) + shmems[numshmems++] = count; + + /* Stage 1: abandon any reserved ports, or ones with status==0xFF + * (empty), and reset any others by reading the reset port. + */ + numprint = -1; + for (port = &ports[0]; port - ports < numports; port++) { + numprint++; + numprint %= 8; + if (!numprint) { + BUGMSG2(D_INIT, "\n"); + BUGMSG2(D_INIT, "S1: "); + } + BUGMSG2(D_INIT, "%Xh ", *port); + + ioaddr = *port; + + if (!request_region(*port, ARCNET_TOTAL_SIZE, "arcnet (90xx)")) { + BUGMSG2(D_INIT_REASONS, "(request_region)\n"); + BUGMSG2(D_INIT_REASONS, "S1: "); + BUGLVL(D_INIT_REASONS) numprint = 0; + *port-- = ports[--numports]; + continue; + } + if (ASTATUS() == 0xFF) { + BUGMSG2(D_INIT_REASONS, "(empty)\n"); + BUGMSG2(D_INIT_REASONS, "S1: "); + BUGLVL(D_INIT_REASONS) numprint = 0; + release_region(*port, ARCNET_TOTAL_SIZE); + *port-- = ports[--numports]; + continue; + } + inb(_RESET); /* begin resetting card */ + + BUGMSG2(D_INIT_REASONS, "\n"); + BUGMSG2(D_INIT_REASONS, "S1: "); + BUGLVL(D_INIT_REASONS) numprint = 0; + } + BUGMSG2(D_INIT, "\n"); + + if (!numports) { + BUGMSG2(D_NORMAL, "S1: No ARCnet cards found.\n"); + return; + } + /* Stage 2: we have now reset any possible ARCnet cards, so we can't + * do anything until they finish. If D_INIT, print the list of + * cards that are left. + */ + numprint = -1; + for (port = &ports[0]; port < ports + numports; port++) { + numprint++; + numprint %= 8; + if (!numprint) { + BUGMSG2(D_INIT, "\n"); + BUGMSG2(D_INIT, "S2: "); + } + BUGMSG2(D_INIT, "%Xh ", *port); + } + BUGMSG2(D_INIT, "\n"); + mdelay(RESETtime); + + /* Stage 3: abandon any shmem addresses that don't have the signature + * 0xD1 byte in the right place, or are read-only. + */ + numprint = -1; + for (p = &shmems[0]; p < shmems + numshmems; p++) { + u_long ptr = *p; + + numprint++; + numprint %= 8; + if (!numprint) { + BUGMSG2(D_INIT, "\n"); + BUGMSG2(D_INIT, "S3: "); + } + BUGMSG2(D_INIT, "%lXh ", *p); + + if (!request_mem_region(*p, BUFFER_SIZE, "arcnet (90xx)")) { + BUGMSG2(D_INIT_REASONS, "(request_mem_region)\n"); + BUGMSG2(D_INIT_REASONS, "Stage 3: "); + BUGLVL(D_INIT_REASONS) numprint = 0; + *p-- = shmems[--numshmems]; + continue; + } + if (isa_readb(ptr) != TESTvalue) { + BUGMSG2(D_INIT_REASONS, "(%02Xh != %02Xh)\n", + isa_readb(ptr), TESTvalue); + BUGMSG2(D_INIT_REASONS, "S3: "); + BUGLVL(D_INIT_REASONS) numprint = 0; + release_mem_region(*p, BUFFER_SIZE); + *p-- = shmems[--numshmems]; + continue; + } + /* By writing 0x42 to the TESTvalue location, we also make + * sure no "mirror" shmem areas show up - if they occur + * in another pass through this loop, they will be discarded + * because *cptr != TESTvalue. + */ + isa_writeb(0x42, ptr); + if (isa_readb(ptr) != 0x42) { + BUGMSG2(D_INIT_REASONS, "(read only)\n"); + BUGMSG2(D_INIT_REASONS, "S3: "); + release_mem_region(*p, BUFFER_SIZE); + *p-- = shmems[--numshmems]; + continue; + } + BUGMSG2(D_INIT_REASONS, "\n"); + BUGMSG2(D_INIT_REASONS, "S3: "); + BUGLVL(D_INIT_REASONS) numprint = 0; + } + BUGMSG2(D_INIT, "\n"); + + if (!numshmems) { + BUGMSG2(D_NORMAL, "S3: No ARCnet cards found.\n"); + for (port = &ports[0]; port < ports + numports; port++) + release_region(*port, ARCNET_TOTAL_SIZE); + return; + } + /* Stage 4: something of a dummy, to report the shmems that are + * still possible after stage 3. + */ + numprint = -1; + for (p = &shmems[0]; p < shmems + numshmems; p++) { + numprint++; + numprint %= 8; + if (!numprint) { + BUGMSG2(D_INIT, "\n"); + BUGMSG2(D_INIT, "S4: "); + } + BUGMSG2(D_INIT, "%lXh ", *p); + } + BUGMSG2(D_INIT, "\n"); + + /* Stage 5: for any ports that have the correct status, can disable + * the RESET flag, and (if no irq is given) generate an autoirq, + * register an ARCnet device. + * + * Currently, we can only register one device per probe, so quit + * after the first one is found. + */ + numprint = -1; + for (port = &ports[0]; port < ports + numports; port++) { + int found = 0; + numprint++; + numprint %= 8; + if (!numprint) { + BUGMSG2(D_INIT, "\n"); + BUGMSG2(D_INIT, "S5: "); + } + BUGMSG2(D_INIT, "%Xh ", *port); + + ioaddr = *port; + status = ASTATUS(); + + if ((status & 0x9D) + != (NORXflag | RECONflag | TXFREEflag | RESETflag)) { + BUGMSG2(D_INIT_REASONS, "(status=%Xh)\n", status); + BUGMSG2(D_INIT_REASONS, "S5: "); + BUGLVL(D_INIT_REASONS) numprint = 0; + release_region(*port, ARCNET_TOTAL_SIZE); + *port-- = ports[--numports]; + continue; + } + ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear); + status = ASTATUS(); + if (status & RESETflag) { + BUGMSG2(D_INIT_REASONS, " (eternal reset, status=%Xh)\n", + status); + BUGMSG2(D_INIT_REASONS, "S5: "); + BUGLVL(D_INIT_REASONS) numprint = 0; + release_region(*port, ARCNET_TOTAL_SIZE); + *port-- = ports[--numports]; + continue; + } + /* skip this completely if an IRQ was given, because maybe + * we're on a machine that locks during autoirq! + */ + if (!irq) { + /* if we do this, we're sure to get an IRQ since the + * card has just reset and the NORXflag is on until + * we tell it to start receiving. + */ + airqmask = probe_irq_on(); + AINTMASK(NORXflag); + udelay(1); + AINTMASK(0); + airq = probe_irq_off(airqmask); + + if (airq <= 0) { + BUGMSG2(D_INIT_REASONS, "(airq=%d)\n", airq); + BUGMSG2(D_INIT_REASONS, "S5: "); + BUGLVL(D_INIT_REASONS) numprint = 0; + release_region(*port, ARCNET_TOTAL_SIZE); + *port-- = ports[--numports]; + continue; + } + } else { + airq = irq; + } + + BUGMSG2(D_INIT, "(%d,", airq); + openparen = 1; + + /* Everything seems okay. But which shmem, if any, puts + * back its signature byte when the card is reset? + * + * If there are multiple cards installed, there might be + * multiple shmems still in the list. + */ +#ifdef FAST_PROBE + if (numports > 1 || numshmems > 1) { + inb(_RESET); + mdelay(RESETtime); + } else { + /* just one shmem and port, assume they match */ + isa_writeb(TESTvalue, shmems[0]); + } +#else + inb(_RESET); + mdelay(RESETtime); +#endif + + for (p = &shmems[0]; p < shmems + numshmems; p++) { + u_long ptr = *p; + + if (isa_readb(ptr) == TESTvalue) { /* found one */ + BUGMSG2(D_INIT, "%lXh)\n", *p); + openparen = 0; + + /* register the card */ + if (com90xx_found(*port, airq, *p) == 0) + found = 1; + numprint = -1; + + /* remove shmem from the list */ + *p = shmems[--numshmems]; + break; /* go to the next I/O port */ + } else { + BUGMSG2(D_INIT_REASONS, "%Xh-", isa_readb(ptr)); + } + } + + if (openparen) { + BUGLVL(D_INIT) printk("no matching shmem)\n"); + BUGLVL(D_INIT_REASONS) printk("S5: "); + BUGLVL(D_INIT_REASONS) numprint = 0; + } + if (!found) + release_region(*port, ARCNET_TOTAL_SIZE); + *port-- = ports[--numports]; + } + + BUGLVL(D_INIT_REASONS) printk("\n"); + + /* Now put back TESTvalue on all leftover shmems. */ + for (p = &shmems[0]; p < shmems + numshmems; p++) { + isa_writeb(TESTvalue, *p); + release_mem_region(*p, BUFFER_SIZE); + } +} + + +/* Set up the struct net_device associated with this card. Called after + * probing succeeds. + */ +static int __init com90xx_found(int ioaddr, int airq, u_long shmem) +{ + struct net_device *dev = NULL; + struct arcnet_local *lp; + u_long first_mirror, last_mirror; + int mirror_size; + + /* allocate struct net_device */ + dev = alloc_arcdev(device); + if (!dev) { + BUGMSG2(D_NORMAL, "com90xx: Can't allocate device!\n"); + release_mem_region(shmem, BUFFER_SIZE); + return -ENOMEM; + } + lp = dev->priv; + /* find the real shared memory start/end points, including mirrors */ + + /* guess the actual size of one "memory mirror" - the number of + * bytes between copies of the shared memory. On most cards, it's + * 2k (or there are no mirrors at all) but on some, it's 4k. + */ + mirror_size = MIRROR_SIZE; + if (isa_readb(shmem) == TESTvalue + && isa_readb(shmem - mirror_size) != TESTvalue + && isa_readb(shmem - 2 * mirror_size) == TESTvalue) + mirror_size *= 2; + + first_mirror = last_mirror = shmem; + while (isa_readb(first_mirror) == TESTvalue) + first_mirror -= mirror_size; + first_mirror += mirror_size; + + while (isa_readb(last_mirror) == TESTvalue) + last_mirror += mirror_size; + last_mirror -= mirror_size; + + dev->mem_start = first_mirror; + dev->mem_end = last_mirror + MIRROR_SIZE - 1; + + release_mem_region(shmem, BUFFER_SIZE); + if (!request_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1, "arcnet (90xx)")) + goto err_free_dev; + + /* reserve the irq */ + if (request_irq(airq, &arcnet_interrupt, 0, "arcnet (90xx)", dev)) { + BUGMSG(D_NORMAL, "Can't get IRQ %d!\n", airq); + goto err_release_mem; + } + dev->irq = airq; + + /* Initialize the rest of the device structure. */ + lp->card_name = "COM90xx"; + lp->hw.command = com90xx_command; + lp->hw.status = com90xx_status; + lp->hw.intmask = com90xx_setmask; + lp->hw.reset = com90xx_reset; + lp->hw.owner = THIS_MODULE; + lp->hw.copy_to_card = com90xx_copy_to_card; + lp->hw.copy_from_card = com90xx_copy_from_card; + lp->mem_start = ioremap(dev->mem_start, dev->mem_end - dev->mem_start + 1); + if (!lp->mem_start) { + BUGMSG(D_NORMAL, "Can't remap device memory!\n"); + goto err_free_irq; + } + + /* get and check the station ID from offset 1 in shmem */ + dev->dev_addr[0] = readb(lp->mem_start + 1); + + dev->base_addr = ioaddr; + + BUGMSG(D_NORMAL, "COM90xx station %02Xh found at %03lXh, IRQ %d, " + "ShMem %lXh (%ld*%xh).\n", + dev->dev_addr[0], + dev->base_addr, dev->irq, dev->mem_start, + (dev->mem_end - dev->mem_start + 1) / mirror_size, mirror_size); + + if (register_netdev(dev)) + goto err_unmap; + + cards[numcards++] = dev; + return 0; + +err_unmap: + iounmap(lp->mem_start); +err_free_irq: + free_irq(dev->irq, dev); +err_release_mem: + release_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1); +err_free_dev: + free_netdev(dev); + return -EIO; +} + + +static void com90xx_command(struct net_device *dev, int cmd) +{ + short ioaddr = dev->base_addr; + + ACOMMAND(cmd); +} + + +static int com90xx_status(struct net_device *dev) +{ + short ioaddr = dev->base_addr; + + return ASTATUS(); +} + + +static void com90xx_setmask(struct net_device *dev, int mask) +{ + short ioaddr = dev->base_addr; + + AINTMASK(mask); +} + + +/* + * Do a hardware reset on the card, and set up necessary registers. + * + * This should be called as little as possible, because it disrupts the + * token on the network (causes a RECON) and requires a significant delay. + * + * However, it does make sure the card is in a defined state. + */ +int com90xx_reset(struct net_device *dev, int really_reset) +{ + struct arcnet_local *lp = dev->priv; + short ioaddr = dev->base_addr; + + BUGMSG(D_INIT, "Resetting (status=%02Xh)\n", ASTATUS()); + + if (really_reset) { + /* reset the card */ + inb(_RESET); + mdelay(RESETtime); + } + ACOMMAND(CFLAGScmd | RESETclear); /* clear flags & end reset */ + ACOMMAND(CFLAGScmd | CONFIGclear); + + /* don't do this until we verify that it doesn't hurt older cards! */ + /* outb(inb(_CONFIG) | ENABLE16flag, _CONFIG); */ + + /* verify that the ARCnet signature byte is present */ + if (readb(lp->mem_start) != TESTvalue) { + if (really_reset) + BUGMSG(D_NORMAL, "reset failed: TESTvalue not present.\n"); + return 1; + } + /* enable extended (512-byte) packets */ + ACOMMAND(CONFIGcmd | EXTconf); + + /* clean out all the memory to make debugging make more sense :) */ + BUGLVL(D_DURING) + memset_io(lp->mem_start, 0x42, 2048); + + /* done! return success. */ + return 0; +} + +static void com90xx_copy_to_card(struct net_device *dev, int bufnum, int offset, + void *buf, int count) +{ + struct arcnet_local *lp = dev->priv; + void __iomem *memaddr = lp->mem_start + bufnum * 512 + offset; + TIME("memcpy_toio", count, memcpy_toio(memaddr, buf, count)); +} + + +static void com90xx_copy_from_card(struct net_device *dev, int bufnum, int offset, + void *buf, int count) +{ + struct arcnet_local *lp = dev->priv; + void __iomem *memaddr = lp->mem_start + bufnum * 512 + offset; + TIME("memcpy_fromio", count, memcpy_fromio(buf, memaddr, count)); +} + + +MODULE_LICENSE("GPL"); + +static int __init com90xx_init(void) +{ + if (irq == 2) + irq = 9; + com90xx_probe(); + if (!numcards) + return -EIO; + return 0; +} + +static void __exit com90xx_exit(void) +{ + struct net_device *dev; + struct arcnet_local *lp; + int count; + + for (count = 0; count < numcards; count++) { + dev = cards[count]; + lp = dev->priv; + + unregister_netdev(dev); + free_irq(dev->irq, dev); + iounmap(lp->mem_start); + release_region(dev->base_addr, ARCNET_TOTAL_SIZE); + release_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1); + free_netdev(dev); + } +} + +module_init(com90xx_init); +module_exit(com90xx_exit); + +#ifndef MODULE +static int __init com90xx_setup(char *s) +{ + int ints[8]; + + s = get_options(s, 8, ints); + if (!ints[0] && !*s) { + printk("com90xx: Disabled.\n"); + return 1; + } + + switch (ints[0]) { + default: /* ERROR */ + printk("com90xx: Too many arguments.\n"); + case 3: /* Mem address */ + shmem = ints[3]; + case 2: /* IRQ */ + irq = ints[2]; + case 1: /* IO address */ + io = ints[1]; + } + + if (*s) + snprintf(device, sizeof(device), "%s", s); + + return 1; +} + +__setup("com90xx=", com90xx_setup); +#endif |