diff options
author | Russell King <rmk@dyn-67.arm.linux.org.uk> | 2008-04-19 16:17:34 (GMT) |
---|---|---|
committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2008-04-19 16:17:34 (GMT) |
commit | cf816ecb533ab96b883dfdc0db174598b5b5c4d2 (patch) | |
tree | 1b7705db288ae2917105e624b01fdf81e0882bf1 /drivers/net/atl1/atl1_hw.c | |
parent | adf6d34e460387ee3e8f1e1875d52bff51212c7d (diff) | |
parent | 15f7d677ccff6f0f5de8a1ee43a792567e9f9de9 (diff) | |
download | linux-fsl-qoriq-cf816ecb533ab96b883dfdc0db174598b5b5c4d2.tar.xz |
Merge branch 'merge-fixes' into devel
Diffstat (limited to 'drivers/net/atl1/atl1_hw.c')
-rw-r--r-- | drivers/net/atl1/atl1_hw.c | 720 |
1 files changed, 0 insertions, 720 deletions
diff --git a/drivers/net/atl1/atl1_hw.c b/drivers/net/atl1/atl1_hw.c deleted file mode 100644 index 9d3bd22..0000000 --- a/drivers/net/atl1/atl1_hw.c +++ /dev/null @@ -1,720 +0,0 @@ -/* - * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. - * Copyright(c) 2006 Chris Snook <csnook@redhat.com> - * Copyright(c) 2006 Jay Cliburn <jcliburn@gmail.com> - * - * Derived from Intel e1000 driver - * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/if_vlan.h> -#include <linux/etherdevice.h> -#include <linux/crc32.h> -#include <asm/byteorder.h> - -#include "atl1.h" - -/* - * Reset the transmit and receive units; mask and clear all interrupts. - * hw - Struct containing variables accessed by shared code - * return : ATL1_SUCCESS or idle status (if error) - */ -s32 atl1_reset_hw(struct atl1_hw *hw) -{ - struct pci_dev *pdev = hw->back->pdev; - u32 icr; - int i; - - /* - * Clear Interrupt mask to stop board from generating - * interrupts & Clear any pending interrupt events - */ - /* - * iowrite32(0, hw->hw_addr + REG_IMR); - * iowrite32(0xffffffff, hw->hw_addr + REG_ISR); - */ - - /* - * Issue Soft Reset to the MAC. This will reset the chip's - * transmit, receive, DMA. It will not effect - * the current PCI configuration. The global reset bit is self- - * clearing, and should clear within a microsecond. - */ - iowrite32(MASTER_CTRL_SOFT_RST, hw->hw_addr + REG_MASTER_CTRL); - ioread32(hw->hw_addr + REG_MASTER_CTRL); - - iowrite16(1, hw->hw_addr + REG_GPHY_ENABLE); - ioread16(hw->hw_addr + REG_GPHY_ENABLE); - - msleep(1); /* delay about 1ms */ - - /* Wait at least 10ms for All module to be Idle */ - for (i = 0; i < 10; i++) { - icr = ioread32(hw->hw_addr + REG_IDLE_STATUS); - if (!icr) - break; - msleep(1); /* delay 1 ms */ - cpu_relax(); /* FIXME: is this still the right way to do this? */ - } - - if (icr) { - dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr); - return icr; - } - - return ATL1_SUCCESS; -} - -/* function about EEPROM - * - * check_eeprom_exist - * return 0 if eeprom exist - */ -static int atl1_check_eeprom_exist(struct atl1_hw *hw) -{ - u32 value; - value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); - if (value & SPI_FLASH_CTRL_EN_VPD) { - value &= ~SPI_FLASH_CTRL_EN_VPD; - iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); - } - - value = ioread16(hw->hw_addr + REG_PCIE_CAP_LIST); - return ((value & 0xFF00) == 0x6C00) ? 0 : 1; -} - -static bool atl1_read_eeprom(struct atl1_hw *hw, u32 offset, u32 *p_value) -{ - int i; - u32 control; - - if (offset & 3) - return false; /* address do not align */ - - iowrite32(0, hw->hw_addr + REG_VPD_DATA); - control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT; - iowrite32(control, hw->hw_addr + REG_VPD_CAP); - ioread32(hw->hw_addr + REG_VPD_CAP); - - for (i = 0; i < 10; i++) { - msleep(2); - control = ioread32(hw->hw_addr + REG_VPD_CAP); - if (control & VPD_CAP_VPD_FLAG) - break; - } - if (control & VPD_CAP_VPD_FLAG) { - *p_value = ioread32(hw->hw_addr + REG_VPD_DATA); - return true; - } - return false; /* timeout */ -} - -/* - * Reads the value from a PHY register - * hw - Struct containing variables accessed by shared code - * reg_addr - address of the PHY register to read - */ -s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data) -{ - u32 val; - int i; - - val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT | - MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 << - MDIO_CLK_SEL_SHIFT; - iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); - ioread32(hw->hw_addr + REG_MDIO_CTRL); - - for (i = 0; i < MDIO_WAIT_TIMES; i++) { - udelay(2); - val = ioread32(hw->hw_addr + REG_MDIO_CTRL); - if (!(val & (MDIO_START | MDIO_BUSY))) - break; - } - if (!(val & (MDIO_START | MDIO_BUSY))) { - *phy_data = (u16) val; - return ATL1_SUCCESS; - } - return ATL1_ERR_PHY; -} - -#define CUSTOM_SPI_CS_SETUP 2 -#define CUSTOM_SPI_CLK_HI 2 -#define CUSTOM_SPI_CLK_LO 2 -#define CUSTOM_SPI_CS_HOLD 2 -#define CUSTOM_SPI_CS_HI 3 - -static bool atl1_spi_read(struct atl1_hw *hw, u32 addr, u32 *buf) -{ - int i; - u32 value; - - iowrite32(0, hw->hw_addr + REG_SPI_DATA); - iowrite32(addr, hw->hw_addr + REG_SPI_ADDR); - - value = SPI_FLASH_CTRL_WAIT_READY | - (CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) << - SPI_FLASH_CTRL_CS_SETUP_SHIFT | (CUSTOM_SPI_CLK_HI & - SPI_FLASH_CTRL_CLK_HI_MASK) << - SPI_FLASH_CTRL_CLK_HI_SHIFT | (CUSTOM_SPI_CLK_LO & - SPI_FLASH_CTRL_CLK_LO_MASK) << - SPI_FLASH_CTRL_CLK_LO_SHIFT | (CUSTOM_SPI_CS_HOLD & - SPI_FLASH_CTRL_CS_HOLD_MASK) << - SPI_FLASH_CTRL_CS_HOLD_SHIFT | (CUSTOM_SPI_CS_HI & - SPI_FLASH_CTRL_CS_HI_MASK) << - SPI_FLASH_CTRL_CS_HI_SHIFT | (1 & SPI_FLASH_CTRL_INS_MASK) << - SPI_FLASH_CTRL_INS_SHIFT; - - iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); - - value |= SPI_FLASH_CTRL_START; - iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL); - ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); - - for (i = 0; i < 10; i++) { - msleep(1); /* 1ms */ - value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL); - if (!(value & SPI_FLASH_CTRL_START)) - break; - } - - if (value & SPI_FLASH_CTRL_START) - return false; - - *buf = ioread32(hw->hw_addr + REG_SPI_DATA); - - return true; -} - -/* - * get_permanent_address - * return 0 if get valid mac address, - */ -static int atl1_get_permanent_address(struct atl1_hw *hw) -{ - u32 addr[2]; - u32 i, control; - u16 reg; - u8 eth_addr[ETH_ALEN]; - bool key_valid; - - if (is_valid_ether_addr(hw->perm_mac_addr)) - return 0; - - /* init */ - addr[0] = addr[1] = 0; - - if (!atl1_check_eeprom_exist(hw)) { /* eeprom exist */ - reg = 0; - key_valid = false; - /* Read out all EEPROM content */ - i = 0; - while (1) { - if (atl1_read_eeprom(hw, i + 0x100, &control)) { - if (key_valid) { - if (reg == REG_MAC_STA_ADDR) - addr[0] = control; - else if (reg == (REG_MAC_STA_ADDR + 4)) - addr[1] = control; - key_valid = false; - } else if ((control & 0xff) == 0x5A) { - key_valid = true; - reg = (u16) (control >> 16); - } else - break; /* assume data end while encount an invalid KEYWORD */ - } else - break; /* read error */ - i += 4; - } - - *(u32 *) ð_addr[2] = swab32(addr[0]); - *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); - if (is_valid_ether_addr(eth_addr)) { - memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); - return 0; - } - return 1; - } - - /* see if SPI FLAGS exist ? */ - addr[0] = addr[1] = 0; - reg = 0; - key_valid = false; - i = 0; - while (1) { - if (atl1_spi_read(hw, i + 0x1f000, &control)) { - if (key_valid) { - if (reg == REG_MAC_STA_ADDR) - addr[0] = control; - else if (reg == (REG_MAC_STA_ADDR + 4)) - addr[1] = control; - key_valid = false; - } else if ((control & 0xff) == 0x5A) { - key_valid = true; - reg = (u16) (control >> 16); - } else - break; /* data end */ - } else - break; /* read error */ - i += 4; - } - - *(u32 *) ð_addr[2] = swab32(addr[0]); - *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); - if (is_valid_ether_addr(eth_addr)) { - memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); - return 0; - } - - /* - * On some motherboards, the MAC address is written by the - * BIOS directly to the MAC register during POST, and is - * not stored in eeprom. If all else thus far has failed - * to fetch the permanent MAC address, try reading it directly. - */ - addr[0] = ioread32(hw->hw_addr + REG_MAC_STA_ADDR); - addr[1] = ioread16(hw->hw_addr + (REG_MAC_STA_ADDR + 4)); - *(u32 *) ð_addr[2] = swab32(addr[0]); - *(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]); - if (is_valid_ether_addr(eth_addr)) { - memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); - return 0; - } - - return 1; -} - -/* - * Reads the adapter's MAC address from the EEPROM - * hw - Struct containing variables accessed by shared code - */ -s32 atl1_read_mac_addr(struct atl1_hw *hw) -{ - u16 i; - - if (atl1_get_permanent_address(hw)) - random_ether_addr(hw->perm_mac_addr); - - for (i = 0; i < ETH_ALEN; i++) - hw->mac_addr[i] = hw->perm_mac_addr[i]; - return ATL1_SUCCESS; -} - -/* - * Hashes an address to determine its location in the multicast table - * hw - Struct containing variables accessed by shared code - * mc_addr - the multicast address to hash - * - * atl1_hash_mc_addr - * purpose - * set hash value for a multicast address - * hash calcu processing : - * 1. calcu 32bit CRC for multicast address - * 2. reverse crc with MSB to LSB - */ -u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr) -{ - u32 crc32, value = 0; - int i; - - crc32 = ether_crc_le(6, mc_addr); - for (i = 0; i < 32; i++) - value |= (((crc32 >> i) & 1) << (31 - i)); - - return value; -} - -/* - * Sets the bit in the multicast table corresponding to the hash value. - * hw - Struct containing variables accessed by shared code - * hash_value - Multicast address hash value - */ -void atl1_hash_set(struct atl1_hw *hw, u32 hash_value) -{ - u32 hash_bit, hash_reg; - u32 mta; - - /* - * The HASH Table is a register array of 2 32-bit registers. - * It is treated like an array of 64 bits. We want to set - * bit BitArray[hash_value]. So we figure out what register - * the bit is in, read it, OR in the new bit, then write - * back the new value. The register is determined by the - * upper 7 bits of the hash value and the bit within that - * register are determined by the lower 5 bits of the value. - */ - hash_reg = (hash_value >> 31) & 0x1; - hash_bit = (hash_value >> 26) & 0x1F; - mta = ioread32((hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2)); - mta |= (1 << hash_bit); - iowrite32(mta, (hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2)); -} - -/* - * Writes a value to a PHY register - * hw - Struct containing variables accessed by shared code - * reg_addr - address of the PHY register to write - * data - data to write to the PHY - */ -s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data) -{ - int i; - u32 val; - - val = ((u32) (phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT | - (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT | - MDIO_SUP_PREAMBLE | - MDIO_START | MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT; - iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); - ioread32(hw->hw_addr + REG_MDIO_CTRL); - - for (i = 0; i < MDIO_WAIT_TIMES; i++) { - udelay(2); - val = ioread32(hw->hw_addr + REG_MDIO_CTRL); - if (!(val & (MDIO_START | MDIO_BUSY))) - break; - } - - if (!(val & (MDIO_START | MDIO_BUSY))) - return ATL1_SUCCESS; - - return ATL1_ERR_PHY; -} - -/* - * Make L001's PHY out of Power Saving State (bug) - * hw - Struct containing variables accessed by shared code - * when power on, L001's PHY always on Power saving State - * (Gigabit Link forbidden) - */ -static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw) -{ - s32 ret; - ret = atl1_write_phy_reg(hw, 29, 0x0029); - if (ret) - return ret; - return atl1_write_phy_reg(hw, 30, 0); -} - -/* - *TODO: do something or get rid of this - */ -s32 atl1_phy_enter_power_saving(struct atl1_hw *hw) -{ -/* s32 ret_val; - * u16 phy_data; - */ - -/* - ret_val = atl1_write_phy_reg(hw, ...); - ret_val = atl1_write_phy_reg(hw, ...); - .... -*/ - return ATL1_SUCCESS; -} - -/* - * Resets the PHY and make all config validate - * hw - Struct containing variables accessed by shared code - * - * Sets bit 15 and 12 of the MII Control regiser (for F001 bug) - */ -static s32 atl1_phy_reset(struct atl1_hw *hw) -{ - struct pci_dev *pdev = hw->back->pdev; - s32 ret_val; - u16 phy_data; - - if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || - hw->media_type == MEDIA_TYPE_1000M_FULL) - phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN; - else { - switch (hw->media_type) { - case MEDIA_TYPE_100M_FULL: - phy_data = - MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 | - MII_CR_RESET; - break; - case MEDIA_TYPE_100M_HALF: - phy_data = MII_CR_SPEED_100 | MII_CR_RESET; - break; - case MEDIA_TYPE_10M_FULL: - phy_data = - MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET; - break; - default: /* MEDIA_TYPE_10M_HALF: */ - phy_data = MII_CR_SPEED_10 | MII_CR_RESET; - break; - } - } - - ret_val = atl1_write_phy_reg(hw, MII_BMCR, phy_data); - if (ret_val) { - u32 val; - int i; - /* pcie serdes link may be down! */ - dev_dbg(&pdev->dev, "pcie phy link down\n"); - - for (i = 0; i < 25; i++) { - msleep(1); - val = ioread32(hw->hw_addr + REG_MDIO_CTRL); - if (!(val & (MDIO_START | MDIO_BUSY))) - break; - } - - if ((val & (MDIO_START | MDIO_BUSY)) != 0) { - dev_warn(&pdev->dev, "pcie link down at least 25ms\n"); - return ret_val; - } - } - return ATL1_SUCCESS; -} - -/* - * Configures PHY autoneg and flow control advertisement settings - * hw - Struct containing variables accessed by shared code - */ -s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw) -{ - s32 ret_val; - s16 mii_autoneg_adv_reg; - s16 mii_1000t_ctrl_reg; - - /* Read the MII Auto-Neg Advertisement Register (Address 4). */ - mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK; - - /* Read the MII 1000Base-T Control Register (Address 9). */ - mii_1000t_ctrl_reg = MII_AT001_CR_1000T_DEFAULT_CAP_MASK; - - /* - * First we clear all the 10/100 mb speed bits in the Auto-Neg - * Advertisement Register (Address 4) and the 1000 mb speed bits in - * the 1000Base-T Control Register (Address 9). - */ - mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK; - mii_1000t_ctrl_reg &= ~MII_AT001_CR_1000T_SPEED_MASK; - - /* - * Need to parse media_type and set up - * the appropriate PHY registers. - */ - switch (hw->media_type) { - case MEDIA_TYPE_AUTO_SENSOR: - mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS | - MII_AR_10T_FD_CAPS | - MII_AR_100TX_HD_CAPS | - MII_AR_100TX_FD_CAPS); - mii_1000t_ctrl_reg |= MII_AT001_CR_1000T_FD_CAPS; - break; - - case MEDIA_TYPE_1000M_FULL: - mii_1000t_ctrl_reg |= MII_AT001_CR_1000T_FD_CAPS; - break; - - case MEDIA_TYPE_100M_FULL: - mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS; - break; - - case MEDIA_TYPE_100M_HALF: - mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS; - break; - - case MEDIA_TYPE_10M_FULL: - mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS; - break; - - default: - mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS; - break; - } - - /* flow control fixed to enable all */ - mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE); - - hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg; - hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg; - - ret_val = atl1_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg); - if (ret_val) - return ret_val; - - ret_val = atl1_write_phy_reg(hw, MII_AT001_CR, mii_1000t_ctrl_reg); - if (ret_val) - return ret_val; - - return ATL1_SUCCESS; -} - -/* - * Configures link settings. - * hw - Struct containing variables accessed by shared code - * Assumes the hardware has previously been reset and the - * transmitter and receiver are not enabled. - */ -static s32 atl1_setup_link(struct atl1_hw *hw) -{ - struct pci_dev *pdev = hw->back->pdev; - s32 ret_val; - - /* - * Options: - * PHY will advertise value(s) parsed from - * autoneg_advertised and fc - * no matter what autoneg is , We will not wait link result. - */ - ret_val = atl1_phy_setup_autoneg_adv(hw); - if (ret_val) { - dev_dbg(&pdev->dev, "error setting up autonegotiation\n"); - return ret_val; - } - /* SW.Reset , En-Auto-Neg if needed */ - ret_val = atl1_phy_reset(hw); - if (ret_val) { - dev_dbg(&pdev->dev, "error resetting phy\n"); - return ret_val; - } - hw->phy_configured = true; - return ret_val; -} - -static struct atl1_spi_flash_dev flash_table[] = { -/* MFR_NAME WRSR READ PRGM WREN WRDI RDSR RDID SECTOR_ERASE CHIP_ERASE */ - {"Atmel", 0x00, 0x03, 0x02, 0x06, 0x04, 0x05, 0x15, 0x52, 0x62}, - {"SST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0x90, 0x20, 0x60}, - {"ST", 0x01, 0x03, 0x02, 0x06, 0x04, 0x05, 0xAB, 0xD8, 0xC7}, -}; - -static void atl1_init_flash_opcode(struct atl1_hw *hw) -{ - if (hw->flash_vendor >= ARRAY_SIZE(flash_table)) - hw->flash_vendor = 0; /* ATMEL */ - - /* Init OP table */ - iowrite8(flash_table[hw->flash_vendor].cmd_program, - hw->hw_addr + REG_SPI_FLASH_OP_PROGRAM); - iowrite8(flash_table[hw->flash_vendor].cmd_sector_erase, - hw->hw_addr + REG_SPI_FLASH_OP_SC_ERASE); - iowrite8(flash_table[hw->flash_vendor].cmd_chip_erase, - hw->hw_addr + REG_SPI_FLASH_OP_CHIP_ERASE); - iowrite8(flash_table[hw->flash_vendor].cmd_rdid, - hw->hw_addr + REG_SPI_FLASH_OP_RDID); - iowrite8(flash_table[hw->flash_vendor].cmd_wren, - hw->hw_addr + REG_SPI_FLASH_OP_WREN); - iowrite8(flash_table[hw->flash_vendor].cmd_rdsr, - hw->hw_addr + REG_SPI_FLASH_OP_RDSR); - iowrite8(flash_table[hw->flash_vendor].cmd_wrsr, - hw->hw_addr + REG_SPI_FLASH_OP_WRSR); - iowrite8(flash_table[hw->flash_vendor].cmd_read, - hw->hw_addr + REG_SPI_FLASH_OP_READ); -} - -/* - * Performs basic configuration of the adapter. - * hw - Struct containing variables accessed by shared code - * Assumes that the controller has previously been reset and is in a - * post-reset uninitialized state. Initializes multicast table, - * and Calls routines to setup link - * Leaves the transmit and receive units disabled and uninitialized. - */ -s32 atl1_init_hw(struct atl1_hw *hw) -{ - u32 ret_val = 0; - - /* Zero out the Multicast HASH table */ - iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE); - /* clear the old settings from the multicast hash table */ - iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2)); - - atl1_init_flash_opcode(hw); - - if (!hw->phy_configured) { - /* enable GPHY LinkChange Interrrupt */ - ret_val = atl1_write_phy_reg(hw, 18, 0xC00); - if (ret_val) - return ret_val; - /* make PHY out of power-saving state */ - ret_val = atl1_phy_leave_power_saving(hw); - if (ret_val) - return ret_val; - /* Call a subroutine to configure the link */ - ret_val = atl1_setup_link(hw); - } - return ret_val; -} - -/* - * Detects the current speed and duplex settings of the hardware. - * hw - Struct containing variables accessed by shared code - * speed - Speed of the connection - * duplex - Duplex setting of the connection - */ -s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex) -{ - struct pci_dev *pdev = hw->back->pdev; - s32 ret_val; - u16 phy_data; - - /* ; --- Read PHY Specific Status Register (17) */ - ret_val = atl1_read_phy_reg(hw, MII_AT001_PSSR, &phy_data); - if (ret_val) - return ret_val; - - if (!(phy_data & MII_AT001_PSSR_SPD_DPLX_RESOLVED)) - return ATL1_ERR_PHY_RES; - - switch (phy_data & MII_AT001_PSSR_SPEED) { - case MII_AT001_PSSR_1000MBS: - *speed = SPEED_1000; - break; - case MII_AT001_PSSR_100MBS: - *speed = SPEED_100; - break; - case MII_AT001_PSSR_10MBS: - *speed = SPEED_10; - break; - default: - dev_dbg(&pdev->dev, "error getting speed\n"); - return ATL1_ERR_PHY_SPEED; - break; - } - if (phy_data & MII_AT001_PSSR_DPLX) - *duplex = FULL_DUPLEX; - else - *duplex = HALF_DUPLEX; - - return ATL1_SUCCESS; -} - -void atl1_set_mac_addr(struct atl1_hw *hw) -{ - u32 value; - /* - * 00-0B-6A-F6-00-DC - * 0: 6AF600DC 1: 000B - * low dword - */ - value = (((u32) hw->mac_addr[2]) << 24) | - (((u32) hw->mac_addr[3]) << 16) | - (((u32) hw->mac_addr[4]) << 8) | (((u32) hw->mac_addr[5])); - iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR); - /* high dword */ - value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1])); - iowrite32(value, (hw->hw_addr + REG_MAC_STA_ADDR) + (1 << 2)); -} |