Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits)
  dp83640: free packet queues on remove
  dp83640: use proper function to free transmit time stamping packets
  ipv6: Do not use routes from locally generated RAs
  |PATCH net-next] tg3: add tx_dropped counter
  be2net: don't create multiple RX/TX rings in multi channel mode
  be2net: don't create multiple TXQs in BE2
  be2net: refactor VF setup/teardown code into be_vf_setup/clear()
  be2net: add vlan/rx-mode/flow-control config to be_setup()
  net_sched: cls_flow: use skb_header_pointer()
  ipv4: avoid useless call of the function check_peer_pmtu
  TCP: remove TCP_DEBUG
  net: Fix driver name for mdio-gpio.c
  ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT
  rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces
  ipv4: fix ipsec forward performance regression
  jme: fix irq storm after suspend/resume
  route: fix ICMP redirect validation
  net: hold sock reference while processing tx timestamps
  tcp: md5: add more const attributes
  Add ethtool -g support to virtio_net
  ...

Fix up conflicts in:
 - drivers/net/Kconfig:
	The split-up generated a trivial conflict with removal of a
	stale reference to Documentation/networking/net-modules.txt.
	Remove it from the new location instead.
 - fs/sysfs/dir.c:
	Fairly nasty conflicts with the sysfs rb-tree usage, conflicting
	with Eric Biederman's changes for tagged directories.

12 files changed, 784 insertions, 93 deletions

diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index 121ede6..044ea06 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -8,8 +8,6 @@
  * Public License ("GPL") version 2 as distributed in the 'COPYING'
  * file from the main directory of the linux kernel source.
  *
- * Send feedback to <socketcan-users@lists.berlios.de>
- *
  *
  * Your platform definition file should specify something like:
  *
diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index 9bf1116..25695bd 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -150,7 +150,19 @@ static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt)
 	bt->prop_seg = tseg1 / 2;
 	bt->phase_seg1 = tseg1 - bt->prop_seg;
 	bt->phase_seg2 = tseg2;
-	bt->sjw = 1;
+
+	/* check for sjw user settings */
+	if (!bt->sjw || !btc->sjw_max)
+		bt->sjw = 1;
+	else {
+		/* bt->sjw is at least 1 -> sanitize upper bound to sjw_max */
+		if (bt->sjw > btc->sjw_max)
+			bt->sjw = btc->sjw_max;
+		/* bt->sjw must not be higher than tseg2 */
+		if (tseg2 < bt->sjw)
+			bt->sjw = tseg2;
+	}
+
 	bt->brp = best_brp;
 	/* real bit-rate */
 	bt->bitrate = priv->clock.freq / (bt->brp * (tseg1 + tseg2 + 1));
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 1767811..e023379 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -33,10 +33,9 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 
-#include <mach/clock.h>
-
 #define DRV_NAME			"flexcan"
 
 /* 8 for RX fifo and 2 error handling */
@@ -192,6 +191,31 @@ static struct can_bittiming_const flexcan_bittiming_const = {
 };
 
 /*
+ * Abstract off the read/write for arm versus ppc.
+ */
+#if defined(__BIG_ENDIAN)
+static inline u32 flexcan_read(void __iomem *addr)
+{
+	return in_be32(addr);
+}
+
+static inline void flexcan_write(u32 val, void __iomem *addr)
+{
+	out_be32(addr, val);
+}
+#else
+static inline u32 flexcan_read(void __iomem *addr)
+{
+	return readl(addr);
+}
+
+static inline void flexcan_write(u32 val, void __iomem *addr)
+{
+	writel(val, addr);
+}
+#endif
+
+/*
  * Swtich transceiver on or off
  */
 static void flexcan_transceiver_switch(const struct flexcan_priv *priv, int on)
@@ -212,9 +236,9 @@ static inline void flexcan_chip_enable(struct flexcan_priv *priv)
 	struct flexcan_regs __iomem *regs = priv->base;
 	u32 reg;
 
-	reg = readl(&regs->mcr);
+	reg = flexcan_read(&regs->mcr);
 	reg &= ~FLEXCAN_MCR_MDIS;
-	writel(reg, &regs->mcr);
+	flexcan_write(reg, &regs->mcr);
 
 	udelay(10);
 }
@@ -224,9 +248,9 @@ static inline void flexcan_chip_disable(struct flexcan_priv *priv)
 	struct flexcan_regs __iomem *regs = priv->base;
 	u32 reg;
 
-	reg = readl(&regs->mcr);
+	reg = flexcan_read(&regs->mcr);
 	reg |= FLEXCAN_MCR_MDIS;
-	writel(reg, &regs->mcr);
+	flexcan_write(reg, &regs->mcr);
 }
 
 static int flexcan_get_berr_counter(const struct net_device *dev,
@@ -234,7 +258,7 @@ static int flexcan_get_berr_counter(const struct net_device *dev,
 {
 	const struct flexcan_priv *priv = netdev_priv(dev);
 	struct flexcan_regs __iomem *regs = priv->base;
-	u32 reg = readl(&regs->ecr);
+	u32 reg = flexcan_read(&regs->ecr);
 
 	bec->txerr = (reg >> 0) & 0xff;
 	bec->rxerr = (reg >> 8) & 0xff;
@@ -268,15 +292,15 @@ static int flexcan_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	if (cf->can_dlc > 0) {
 		u32 data = be32_to_cpup((__be32 *)&cf->data[0]);
-		writel(data, &regs->cantxfg[FLEXCAN_TX_BUF_ID].data[0]);
+		flexcan_write(data, &regs->cantxfg[FLEXCAN_TX_BUF_ID].data[0]);
 	}
 	if (cf->can_dlc > 3) {
 		u32 data = be32_to_cpup((__be32 *)&cf->data[4]);
-		writel(data, &regs->cantxfg[FLEXCAN_TX_BUF_ID].data[1]);
+		flexcan_write(data, &regs->cantxfg[FLEXCAN_TX_BUF_ID].data[1]);
 	}
 
-	writel(can_id, &regs->cantxfg[FLEXCAN_TX_BUF_ID].can_id);
-	writel(ctrl, &regs->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl);
+	flexcan_write(can_id, &regs->cantxfg[FLEXCAN_TX_BUF_ID].can_id);
+	flexcan_write(ctrl, &regs->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl);
 
 	kfree_skb(skb);
 
@@ -464,8 +488,8 @@ static void flexcan_read_fifo(const struct net_device *dev,
 	struct flexcan_mb __iomem *mb = &regs->cantxfg[0];
 	u32 reg_ctrl, reg_id;
 
-	reg_ctrl = readl(&mb->can_ctrl);
-	reg_id = readl(&mb->can_id);
+	reg_ctrl = flexcan_read(&mb->can_ctrl);
+	reg_id = flexcan_read(&mb->can_id);
 	if (reg_ctrl & FLEXCAN_MB_CNT_IDE)
 		cf->can_id = ((reg_id >> 0) & CAN_EFF_MASK) | CAN_EFF_FLAG;
 	else
@@ -475,12 +499,12 @@ static void flexcan_read_fifo(const struct net_device *dev,
 		cf->can_id |= CAN_RTR_FLAG;
 	cf->can_dlc = get_can_dlc((reg_ctrl >> 16) & 0xf);
 
-	*(__be32 *)(cf->data + 0) = cpu_to_be32(readl(&mb->data[0]));
-	*(__be32 *)(cf->data + 4) = cpu_to_be32(readl(&mb->data[1]));
+	*(__be32 *)(cf->data + 0) = cpu_to_be32(flexcan_read(&mb->data[0]));
+	*(__be32 *)(cf->data + 4) = cpu_to_be32(flexcan_read(&mb->data[1]));
 
 	/* mark as read */
-	writel(FLEXCAN_IFLAG_RX_FIFO_AVAILABLE, &regs->iflag1);
-	readl(&regs->timer);
+	flexcan_write(FLEXCAN_IFLAG_RX_FIFO_AVAILABLE, &regs->iflag1);
+	flexcan_read(&regs->timer);
 }
 
 static int flexcan_read_frame(struct net_device *dev)
@@ -516,17 +540,17 @@ static int flexcan_poll(struct napi_struct *napi, int quota)
 	 * The error bits are cleared on read,
 	 * use saved value from irq handler.
 	 */
-	reg_esr = readl(&regs->esr) | priv->reg_esr;
+	reg_esr = flexcan_read(&regs->esr) | priv->reg_esr;
 
 	/* handle state changes */
 	work_done += flexcan_poll_state(dev, reg_esr);
 
 	/* handle RX-FIFO */
-	reg_iflag1 = readl(&regs->iflag1);
+	reg_iflag1 = flexcan_read(&regs->iflag1);
 	while (reg_iflag1 & FLEXCAN_IFLAG_RX_FIFO_AVAILABLE &&
 	       work_done < quota) {
 		work_done += flexcan_read_frame(dev);
-		reg_iflag1 = readl(&regs->iflag1);
+		reg_iflag1 = flexcan_read(&regs->iflag1);
 	}
 
 	/* report bus errors */
@@ -536,8 +560,8 @@ static int flexcan_poll(struct napi_struct *napi, int quota)
 	if (work_done < quota) {
 		napi_complete(napi);
 		/* enable IRQs */
-		writel(FLEXCAN_IFLAG_DEFAULT, &regs->imask1);
-		writel(priv->reg_ctrl_default, &regs->ctrl);
+		flexcan_write(FLEXCAN_IFLAG_DEFAULT, &regs->imask1);
+		flexcan_write(priv->reg_ctrl_default, &regs->ctrl);
 	}
 
 	return work_done;
@@ -551,9 +575,9 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
 	struct flexcan_regs __iomem *regs = priv->base;
 	u32 reg_iflag1, reg_esr;
 
-	reg_iflag1 = readl(&regs->iflag1);
-	reg_esr = readl(&regs->esr);
-	writel(FLEXCAN_ESR_ERR_INT, &regs->esr);	/* ACK err IRQ */
+	reg_iflag1 = flexcan_read(&regs->iflag1);
+	reg_esr = flexcan_read(&regs->esr);
+	flexcan_write(FLEXCAN_ESR_ERR_INT, &regs->esr);	/* ACK err IRQ */
 
 	/*
 	 * schedule NAPI in case of:
@@ -569,16 +593,16 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
 		 * save them for later use.
 		 */
 		priv->reg_esr = reg_esr & FLEXCAN_ESR_ERR_BUS;
-		writel(FLEXCAN_IFLAG_DEFAULT & ~FLEXCAN_IFLAG_RX_FIFO_AVAILABLE,
-		       &regs->imask1);
-		writel(priv->reg_ctrl_default & ~FLEXCAN_CTRL_ERR_ALL,
+		flexcan_write(FLEXCAN_IFLAG_DEFAULT &
+			~FLEXCAN_IFLAG_RX_FIFO_AVAILABLE, &regs->imask1);
+		flexcan_write(priv->reg_ctrl_default & ~FLEXCAN_CTRL_ERR_ALL,
 		       &regs->ctrl);
 		napi_schedule(&priv->napi);
 	}
 
 	/* FIFO overflow */
 	if (reg_iflag1 & FLEXCAN_IFLAG_RX_FIFO_OVERFLOW) {
-		writel(FLEXCAN_IFLAG_RX_FIFO_OVERFLOW, &regs->iflag1);
+		flexcan_write(FLEXCAN_IFLAG_RX_FIFO_OVERFLOW, &regs->iflag1);
 		dev->stats.rx_over_errors++;
 		dev->stats.rx_errors++;
 	}
@@ -587,7 +611,7 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
 	if (reg_iflag1 & (1 << FLEXCAN_TX_BUF_ID)) {
 		/* tx_bytes is incremented in flexcan_start_xmit */
 		stats->tx_packets++;
-		writel((1 << FLEXCAN_TX_BUF_ID), &regs->iflag1);
+		flexcan_write((1 << FLEXCAN_TX_BUF_ID), &regs->iflag1);
 		netif_wake_queue(dev);
 	}
 
@@ -601,7 +625,7 @@ static void flexcan_set_bittiming(struct net_device *dev)
 	struct flexcan_regs __iomem *regs = priv->base;
 	u32 reg;
 
-	reg = readl(&regs->ctrl);
+	reg = flexcan_read(&regs->ctrl);
 	reg &= ~(FLEXCAN_CTRL_PRESDIV(0xff) |
 		 FLEXCAN_CTRL_RJW(0x3) |
 		 FLEXCAN_CTRL_PSEG1(0x7) |
@@ -625,11 +649,11 @@ static void flexcan_set_bittiming(struct net_device *dev)
 		reg |= FLEXCAN_CTRL_SMP;
 
 	dev_info(dev->dev.parent, "writing ctrl=0x%08x\n", reg);
-	writel(reg, &regs->ctrl);
+	flexcan_write(reg, &regs->ctrl);
 
 	/* print chip status */
 	dev_dbg(dev->dev.parent, "%s: mcr=0x%08x ctrl=0x%08x\n", __func__,
-		readl(&regs->mcr), readl(&regs->ctrl));
+		flexcan_read(&regs->mcr), flexcan_read(&regs->ctrl));
 }
 
 /*
@@ -650,10 +674,10 @@ static int flexcan_chip_start(struct net_device *dev)
 	flexcan_chip_enable(priv);
 
 	/* soft reset */
-	writel(FLEXCAN_MCR_SOFTRST, &regs->mcr);
+	flexcan_write(FLEXCAN_MCR_SOFTRST, &regs->mcr);
 	udelay(10);
 
-	reg_mcr = readl(&regs->mcr);
+	reg_mcr = flexcan_read(&regs->mcr);
 	if (reg_mcr & FLEXCAN_MCR_SOFTRST) {
 		dev_err(dev->dev.parent,
 			"Failed to softreset can module (mcr=0x%08x)\n",
@@ -675,12 +699,12 @@ static int flexcan_chip_start(struct net_device *dev)
 	 * choose format C
 	 *
 	 */
-	reg_mcr = readl(&regs->mcr);
+	reg_mcr = flexcan_read(&regs->mcr);
 	reg_mcr |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_FEN | FLEXCAN_MCR_HALT |
 		FLEXCAN_MCR_SUPV | FLEXCAN_MCR_WRN_EN |
 		FLEXCAN_MCR_IDAM_C;
 	dev_dbg(dev->dev.parent, "%s: writing mcr=0x%08x", __func__, reg_mcr);
-	writel(reg_mcr, &regs->mcr);
+	flexcan_write(reg_mcr, &regs->mcr);
 
 	/*
 	 * CTRL
@@ -698,7 +722,7 @@ static int flexcan_chip_start(struct net_device *dev)
 	 * (FLEXCAN_CTRL_ERR_MSK), too. Otherwise we don't get any
 	 * warning or bus passive interrupts.
 	 */
-	reg_ctrl = readl(&regs->ctrl);
+	reg_ctrl = flexcan_read(&regs->ctrl);
 	reg_ctrl &= ~FLEXCAN_CTRL_TSYN;
 	reg_ctrl |= FLEXCAN_CTRL_BOFF_REC | FLEXCAN_CTRL_LBUF |
 		FLEXCAN_CTRL_ERR_STATE | FLEXCAN_CTRL_ERR_MSK;
@@ -706,38 +730,39 @@ static int flexcan_chip_start(struct net_device *dev)
 	/* save for later use */
 	priv->reg_ctrl_default = reg_ctrl;
 	dev_dbg(dev->dev.parent, "%s: writing ctrl=0x%08x", __func__, reg_ctrl);
-	writel(reg_ctrl, &regs->ctrl);
+	flexcan_write(reg_ctrl, &regs->ctrl);
 
 	for (i = 0; i < ARRAY_SIZE(regs->cantxfg); i++) {
-		writel(0, &regs->cantxfg[i].can_ctrl);
-		writel(0, &regs->cantxfg[i].can_id);
-		writel(0, &regs->cantxfg[i].data[0]);
-		writel(0, &regs->cantxfg[i].data[1]);
+		flexcan_write(0, &regs->cantxfg[i].can_ctrl);
+		flexcan_write(0, &regs->cantxfg[i].can_id);
+		flexcan_write(0, &regs->cantxfg[i].data[0]);
+		flexcan_write(0, &regs->cantxfg[i].data[1]);
 
 		/* put MB into rx queue */
-		writel(FLEXCAN_MB_CNT_CODE(0x4), &regs->cantxfg[i].can_ctrl);
+		flexcan_write(FLEXCAN_MB_CNT_CODE(0x4),
+			&regs->cantxfg[i].can_ctrl);
 	}
 
 	/* acceptance mask/acceptance code (accept everything) */
-	writel(0x0, &regs->rxgmask);
-	writel(0x0, &regs->rx14mask);
-	writel(0x0, &regs->rx15mask);
+	flexcan_write(0x0, &regs->rxgmask);
+	flexcan_write(0x0, &regs->rx14mask);
+	flexcan_write(0x0, &regs->rx15mask);
 
 	flexcan_transceiver_switch(priv, 1);
 
 	/* synchronize with the can bus */
-	reg_mcr = readl(&regs->mcr);
+	reg_mcr = flexcan_read(&regs->mcr);
 	reg_mcr &= ~FLEXCAN_MCR_HALT;
-	writel(reg_mcr, &regs->mcr);
+	flexcan_write(reg_mcr, &regs->mcr);
 
 	priv->can.state = CAN_STATE_ERROR_ACTIVE;
 
 	/* enable FIFO interrupts */
-	writel(FLEXCAN_IFLAG_DEFAULT, &regs->imask1);
+	flexcan_write(FLEXCAN_IFLAG_DEFAULT, &regs->imask1);
 
 	/* print chip status */
 	dev_dbg(dev->dev.parent, "%s: reading mcr=0x%08x ctrl=0x%08x\n",
-		__func__, readl(&regs->mcr), readl(&regs->ctrl));
+		__func__, flexcan_read(&regs->mcr), flexcan_read(&regs->ctrl));
 
 	return 0;
 
@@ -759,12 +784,12 @@ static void flexcan_chip_stop(struct net_device *dev)
 	u32 reg;
 
 	/* Disable all interrupts */
-	writel(0, &regs->imask1);
+	flexcan_write(0, &regs->imask1);
 
 	/* Disable + halt module */
-	reg = readl(&regs->mcr);
+	reg = flexcan_read(&regs->mcr);
 	reg |= FLEXCAN_MCR_MDIS | FLEXCAN_MCR_HALT;
-	writel(reg, &regs->mcr);
+	flexcan_write(reg, &regs->mcr);
 
 	flexcan_transceiver_switch(priv, 0);
 	priv->can.state = CAN_STATE_STOPPED;
@@ -856,24 +881,24 @@ static int __devinit register_flexcandev(struct net_device *dev)
 
 	/* select "bus clock", chip must be disabled */
 	flexcan_chip_disable(priv);
-	reg = readl(&regs->ctrl);
+	reg = flexcan_read(&regs->ctrl);
 	reg |= FLEXCAN_CTRL_CLK_SRC;
-	writel(reg, &regs->ctrl);
+	flexcan_write(reg, &regs->ctrl);
 
 	flexcan_chip_enable(priv);
 
 	/* set freeze, halt and activate FIFO, restrict register access */
-	reg = readl(&regs->mcr);
+	reg = flexcan_read(&regs->mcr);
 	reg |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_HALT |
 		FLEXCAN_MCR_FEN | FLEXCAN_MCR_SUPV;
-	writel(reg, &regs->mcr);
+	flexcan_write(reg, &regs->mcr);
 
 	/*
 	 * Currently we only support newer versions of this core
 	 * featuring a RX FIFO. Older cores found on some Coldfire
 	 * derivates are not yet supported.
 	 */
-	reg = readl(&regs->mcr);
+	reg = flexcan_read(&regs->mcr);
 	if (!(reg & FLEXCAN_MCR_FEN)) {
 		dev_err(dev->dev.parent,
 			"Could not enable RX FIFO, unsupported core\n");
@@ -901,16 +926,29 @@ static int __devinit flexcan_probe(struct platform_device *pdev)
 	struct net_device *dev;
 	struct flexcan_priv *priv;
 	struct resource *mem;
-	struct clk *clk;
+	struct clk *clk = NULL;
 	void __iomem *base;
 	resource_size_t mem_size;
 	int err, irq;
+	u32 clock_freq = 0;
+
+	if (pdev->dev.of_node) {
+		const u32 *clock_freq_p;
 
-	clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(clk)) {
-		dev_err(&pdev->dev, "no clock defined\n");
-		err = PTR_ERR(clk);
-		goto failed_clock;
+		clock_freq_p = of_get_property(pdev->dev.of_node,
+						"clock-frequency", NULL);
+		if (clock_freq_p)
+			clock_freq = *clock_freq_p;
+	}
+
+	if (!clock_freq) {
+		clk = clk_get(&pdev->dev, NULL);
+		if (IS_ERR(clk)) {
+			dev_err(&pdev->dev, "no clock defined\n");
+			err = PTR_ERR(clk);
+			goto failed_clock;
+		}
+		clock_freq = clk_get_rate(clk);
 	}
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -943,7 +981,7 @@ static int __devinit flexcan_probe(struct platform_device *pdev)
 	dev->flags |= IFF_ECHO; /* we support local echo in hardware */
 
 	priv = netdev_priv(dev);
-	priv->can.clock.freq = clk_get_rate(clk);
+	priv->can.clock.freq = clock_freq;
 	priv->can.bittiming_const = &flexcan_bittiming_const;
 	priv->can.do_set_mode = flexcan_set_mode;
 	priv->can.do_get_berr_counter = flexcan_get_berr_counter;
@@ -978,7 +1016,8 @@ static int __devinit flexcan_probe(struct platform_device *pdev)
  failed_map:
 	release_mem_region(mem->start, mem_size);
  failed_get:
-	clk_put(clk);
+	if (clk)
+		clk_put(clk);
  failed_clock:
 	return err;
 }
@@ -996,15 +1035,27 @@ static int __devexit flexcan_remove(struct platform_device *pdev)
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(mem->start, resource_size(mem));
 
-	clk_put(priv->clk);
+	if (priv->clk)
+		clk_put(priv->clk);
 
 	free_candev(dev);
 
 	return 0;
 }
 
+static struct of_device_id flexcan_of_match[] = {
+	{
+		.compatible = "fsl,p1010-flexcan",
+	},
+	{},
+};
+
 static struct platform_driver flexcan_driver = {
-	.driver.name = DRV_NAME,
+	.driver = {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = flexcan_of_match,
+	},
 	.probe = flexcan_probe,
 	.remove = __devexit_p(flexcan_remove),
 };
diff --git a/drivers/net/can/mscan/mscan.c b/drivers/net/can/mscan/mscan.c
index 4cc6f44..ec4a311 100644
--- a/drivers/net/can/mscan/mscan.c
+++ b/drivers/net/can/mscan/mscan.c
@@ -62,7 +62,7 @@ static enum can_state state_map[] = {
 static int mscan_set_mode(struct net_device *dev, u8 mode)
 {
 	struct mscan_priv *priv = netdev_priv(dev);
-	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct mscan_regs __iomem *regs = priv->reg_base;
 	int ret = 0;
 	int i;
 	u8 canctl1;
@@ -138,7 +138,7 @@ static int mscan_set_mode(struct net_device *dev, u8 mode)
 static int mscan_start(struct net_device *dev)
 {
 	struct mscan_priv *priv = netdev_priv(dev);
-	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct mscan_regs __iomem *regs = priv->reg_base;
 	u8 canrflg;
 	int err;
 
@@ -178,7 +178,7 @@ static int mscan_restart(struct net_device *dev)
 	struct mscan_priv *priv = netdev_priv(dev);
 
 	if (priv->type == MSCAN_TYPE_MPC5121) {
-		struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+		struct mscan_regs __iomem *regs = priv->reg_base;
 
 		priv->can.state = CAN_STATE_ERROR_ACTIVE;
 		WARN(!(in_8(&regs->canmisc) & MSCAN_BOHOLD),
@@ -199,7 +199,7 @@ static netdev_tx_t mscan_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct can_frame *frame = (struct can_frame *)skb->data;
 	struct mscan_priv *priv = netdev_priv(dev);
-	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct mscan_regs __iomem *regs = priv->reg_base;
 	int i, rtr, buf_id;
 	u32 can_id;
 
@@ -307,7 +307,7 @@ static enum can_state check_set_state(struct net_device *dev, u8 canrflg)
 static void mscan_get_rx_frame(struct net_device *dev, struct can_frame *frame)
 {
 	struct mscan_priv *priv = netdev_priv(dev);
-	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct mscan_regs __iomem *regs = priv->reg_base;
 	u32 can_id;
 	int i;
 
@@ -348,7 +348,7 @@ static void mscan_get_err_frame(struct net_device *dev, struct can_frame *frame,
 				u8 canrflg)
 {
 	struct mscan_priv *priv = netdev_priv(dev);
-	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct mscan_regs __iomem *regs = priv->reg_base;
 	struct net_device_stats *stats = &dev->stats;
 	enum can_state old_state;
 
@@ -411,7 +411,7 @@ static int mscan_rx_poll(struct napi_struct *napi, int quota)
 {
 	struct mscan_priv *priv = container_of(napi, struct mscan_priv, napi);
 	struct net_device *dev = napi->dev;
-	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct mscan_regs __iomem *regs = priv->reg_base;
 	struct net_device_stats *stats = &dev->stats;
 	int npackets = 0;
 	int ret = 1;
@@ -458,7 +458,7 @@ static irqreturn_t mscan_isr(int irq, void *dev_id)
 {
 	struct net_device *dev = (struct net_device *)dev_id;
 	struct mscan_priv *priv = netdev_priv(dev);
-	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct mscan_regs __iomem *regs = priv->reg_base;
 	struct net_device_stats *stats = &dev->stats;
 	u8 cantier, cantflg, canrflg;
 	irqreturn_t ret = IRQ_NONE;
@@ -542,7 +542,7 @@ static int mscan_do_set_mode(struct net_device *dev, enum can_mode mode)
 static int mscan_do_set_bittiming(struct net_device *dev)
 {
 	struct mscan_priv *priv = netdev_priv(dev);
-	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct mscan_regs __iomem *regs = priv->reg_base;
 	struct can_bittiming *bt = &priv->can.bittiming;
 	u8 btr0, btr1;
 
@@ -564,7 +564,7 @@ static int mscan_open(struct net_device *dev)
 {
 	int ret;
 	struct mscan_priv *priv = netdev_priv(dev);
-	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct mscan_regs __iomem *regs = priv->reg_base;
 
 	/* common open */
 	ret = open_candev(dev);
@@ -603,7 +603,7 @@ exit_napi_disable:
 static int mscan_close(struct net_device *dev)
 {
 	struct mscan_priv *priv = netdev_priv(dev);
-	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct mscan_regs __iomem *regs = priv->reg_base;
 
 	netif_stop_queue(dev);
 	napi_disable(&priv->napi);
@@ -627,7 +627,7 @@ static const struct net_device_ops mscan_netdev_ops = {
 int register_mscandev(struct net_device *dev, int mscan_clksrc)
 {
 	struct mscan_priv *priv = netdev_priv(dev);
-	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct mscan_regs __iomem *regs = priv->reg_base;
 	u8 ctl1;
 
 	ctl1 = in_8(&regs->canctl1);
@@ -664,7 +664,7 @@ int register_mscandev(struct net_device *dev, int mscan_clksrc)
 void unregister_mscandev(struct net_device *dev)
 {
 	struct mscan_priv *priv = netdev_priv(dev);
-	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct mscan_regs __iomem *regs = priv->reg_base;
 	mscan_set_mode(dev, MSCAN_INIT_MODE);
 	clrbits8(&regs->canctl1, MSCAN_CANE);
 	unregister_candev(dev);
diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig
index 6fdc031..fe9e64d 100644
--- a/drivers/net/can/sja1000/Kconfig
+++ b/drivers/net/can/sja1000/Kconfig
@@ -29,6 +29,13 @@ config CAN_SJA1000_OF_PLATFORM
 	  OpenFirmware bindings, e.g. if you have a PowerPC based system
 	  you may want to enable this option.
 
+config CAN_EMS_PCMCIA
+	tristate "EMS CPC-CARD Card"
+	depends on PCMCIA
+	---help---
+	  This driver is for the one or two channel CPC-CARD cards from
+	  EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
+
 config CAN_EMS_PCI
 	tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
 	depends on PCI
@@ -37,6 +44,13 @@ config CAN_EMS_PCI
 	  CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
 	  (http://www.ems-wuensche.de).
 
+config CAN_PEAK_PCI
+	tristate "PEAK PCAN PCI/PCIe Cards"
+	depends on PCI
+	---help---
+	  This driver is for the PCAN PCI/PCIe cards (1, 2, 3 or 4 channels)
+	  from PEAK Systems (http://www.peak-system.com).
+
 config CAN_KVASER_PCI
 	tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
 	depends on PCI
diff --git a/drivers/net/can/sja1000/Makefile b/drivers/net/can/sja1000/Makefile
index 2c591eb..0604f24 100644
--- a/drivers/net/can/sja1000/Makefile
+++ b/drivers/net/can/sja1000/Makefile
@@ -6,8 +6,10 @@ obj-$(CONFIG_CAN_SJA1000) += sja1000.o
 obj-$(CONFIG_CAN_SJA1000_ISA) += sja1000_isa.o
 obj-$(CONFIG_CAN_SJA1000_PLATFORM) += sja1000_platform.o
 obj-$(CONFIG_CAN_SJA1000_OF_PLATFORM) += sja1000_of_platform.o
+obj-$(CONFIG_CAN_EMS_PCMCIA) += ems_pcmcia.o
 obj-$(CONFIG_CAN_EMS_PCI) += ems_pci.o
 obj-$(CONFIG_CAN_KVASER_PCI) += kvaser_pci.o
+obj-$(CONFIG_CAN_PEAK_PCI) += peak_pci.o
 obj-$(CONFIG_CAN_PLX_PCI) += plx_pci.o
 obj-$(CONFIG_CAN_TSCAN1) += tscan1.o
 
diff --git a/drivers/net/can/sja1000/ems_pcmcia.c b/drivers/net/can/sja1000/ems_pcmcia.c
new file mode 100644
index 0000000..075a545
--- /dev/null
+++ b/drivers/net/can/sja1000/ems_pcmcia.c
@@ -0,0 +1,331 @@
+/*
+ * Copyright (C) 2008 Sebastian Haas (initial chardev implementation)
+ * Copyright (C) 2010 Markus Plessing <plessing@ems-wuensche.com>
+ * Rework for mainline by Oliver Hartkopp <socketcan@hartkopp.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include "sja1000.h"
+
+#define DRV_NAME "ems_pcmcia"
+
+MODULE_AUTHOR("Markus Plessing <plessing@ems-wuensche.com>");
+MODULE_DESCRIPTION("Socket-CAN driver for EMS CPC-CARD cards");
+MODULE_SUPPORTED_DEVICE("EMS CPC-CARD CAN card");
+MODULE_LICENSE("GPL v2");
+
+#define EMS_PCMCIA_MAX_CHAN 2
+
+struct ems_pcmcia_card {
+	int channels;
+	struct pcmcia_device *pcmcia_dev;
+	struct net_device *net_dev[EMS_PCMCIA_MAX_CHAN];
+	void __iomem *base_addr;
+};
+
+#define EMS_PCMCIA_CAN_CLOCK (16000000 / 2)
+
+/*
+ * The board configuration is probably following:
+ * RX1 is connected to ground.
+ * TX1 is not connected.
+ * CLKO is not connected.
+ * Setting the OCR register to 0xDA is a good idea.
+ * This means  normal output mode , push-pull and the correct polarity.
+ */
+#define EMS_PCMCIA_OCR (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL)
+
+/*
+ * In the CDR register, you should set CBP to 1.
+ * You will probably also want to set the clock divider value to 7
+ * (meaning direct oscillator output) because the second SJA1000 chip
+ * is driven by the first one CLKOUT output.
+ */
+#define EMS_PCMCIA_CDR (CDR_CBP | CDR_CLKOUT_MASK)
+#define EMS_PCMCIA_MEM_SIZE 4096 /* Size of the remapped io-memory */
+#define EMS_PCMCIA_CAN_BASE_OFFSET 0x100 /* Offset where controllers starts */
+#define EMS_PCMCIA_CAN_CTRL_SIZE 0x80 /* Memory size for each controller */
+
+#define EMS_CMD_RESET 0x00 /* Perform a reset of the card */
+#define EMS_CMD_MAP   0x03 /* Map CAN controllers into card' memory */
+#define EMS_CMD_UMAP  0x02 /* Unmap CAN controllers from card' memory */
+
+static struct pcmcia_device_id ems_pcmcia_tbl[] = {
+	PCMCIA_DEVICE_PROD_ID123("EMS_T_W", "CPC-Card", "V2.0", 0xeab1ea23,
+				 0xa338573f, 0xe4575800),
+	PCMCIA_DEVICE_NULL,
+};
+
+MODULE_DEVICE_TABLE(pcmcia, ems_pcmcia_tbl);
+
+static u8 ems_pcmcia_read_reg(const struct sja1000_priv *priv, int port)
+{
+	return readb(priv->reg_base + port);
+}
+
+static void ems_pcmcia_write_reg(const struct sja1000_priv *priv, int port,
+				 u8 val)
+{
+	writeb(val, priv->reg_base + port);
+}
+
+static irqreturn_t ems_pcmcia_interrupt(int irq, void *dev_id)
+{
+	struct ems_pcmcia_card *card = dev_id;
+	struct net_device *dev;
+	irqreturn_t retval = IRQ_NONE;
+	int i, again;
+
+	/* Card not present */
+	if (readw(card->base_addr) != 0xAA55)
+		return IRQ_HANDLED;
+
+	do {
+		again = 0;
+
+		/* Check interrupt for each channel */
+		for (i = 0; i < card->channels; i++) {
+			dev = card->net_dev[i];
+			if (!dev)
+				continue;
+
+			if (sja1000_interrupt(irq, dev) == IRQ_HANDLED)
+				again = 1;
+		}
+		/* At least one channel handled the interrupt */
+		if (again)
+			retval = IRQ_HANDLED;
+
+	} while (again);
+
+	return retval;
+}
+
+/*
+ * Check if a CAN controller is present at the specified location
+ * by trying to set 'em into the PeliCAN mode
+ */
+static inline int ems_pcmcia_check_chan(struct sja1000_priv *priv)
+{
+	/* Make sure SJA1000 is in reset mode */
+	ems_pcmcia_write_reg(priv, REG_MOD, 1);
+	ems_pcmcia_write_reg(priv, REG_CDR, CDR_PELICAN);
+
+	/* read reset-values */
+	if (ems_pcmcia_read_reg(priv, REG_CDR) == CDR_PELICAN)
+		return 1;
+
+	return 0;
+}
+
+static void ems_pcmcia_del_card(struct pcmcia_device *pdev)
+{
+	struct ems_pcmcia_card *card = pdev->priv;
+	struct net_device *dev;
+	int i;
+
+	free_irq(pdev->irq, card);
+
+	for (i = 0; i < card->channels; i++) {
+		dev = card->net_dev[i];
+		if (!dev)
+			continue;
+
+		printk(KERN_INFO "%s: removing %s on channel #%d\n",
+		       DRV_NAME, dev->name, i);
+		unregister_sja1000dev(dev);
+		free_sja1000dev(dev);
+	}
+
+	writeb(EMS_CMD_UMAP, card->base_addr);
+	iounmap(card->base_addr);
+	kfree(card);
+
+	pdev->priv = NULL;
+}
+
+/*
+ * Probe PCI device for EMS CAN signature and register each available
+ * CAN channel to SJA1000 Socket-CAN subsystem.
+ */
+static int __devinit ems_pcmcia_add_card(struct pcmcia_device *pdev,
+					 unsigned long base)
+{
+	struct sja1000_priv *priv;
+	struct net_device *dev;
+	struct ems_pcmcia_card *card;
+	int err, i;
+
+	/* Allocating card structures to hold addresses, ... */
+	card = kzalloc(sizeof(struct ems_pcmcia_card), GFP_KERNEL);
+	if (!card)
+		return -ENOMEM;
+
+	pdev->priv = card;
+	card->channels = 0;
+
+	card->base_addr = ioremap(base, EMS_PCMCIA_MEM_SIZE);
+	if (!card->base_addr) {
+		err = -ENOMEM;
+		goto failure_cleanup;
+	}
+
+	/* Check for unique EMS CAN signature */
+	if (readw(card->base_addr) != 0xAA55) {
+		err = -ENODEV;
+		goto failure_cleanup;
+	}
+
+	/* Request board reset */
+	writeb(EMS_CMD_RESET, card->base_addr);
+
+	/* Make sure CAN controllers are mapped into card's memory space */
+	writeb(EMS_CMD_MAP, card->base_addr);
+
+	/* Detect available channels */
+	for (i = 0; i < EMS_PCMCIA_MAX_CHAN; i++) {
+		dev = alloc_sja1000dev(0);
+		if (!dev) {
+			err = -ENOMEM;
+			goto failure_cleanup;
+		}
+
+		card->net_dev[i] = dev;
+		priv = netdev_priv(dev);
+		priv->priv = card;
+		SET_NETDEV_DEV(dev, &pdev->dev);
+
+		priv->irq_flags = IRQF_SHARED;
+		dev->irq = pdev->irq;
+		priv->reg_base = card->base_addr + EMS_PCMCIA_CAN_BASE_OFFSET +
+			(i * EMS_PCMCIA_CAN_CTRL_SIZE);
+
+		/* Check if channel is present */
+		if (ems_pcmcia_check_chan(priv)) {
+			priv->read_reg  = ems_pcmcia_read_reg;
+			priv->write_reg = ems_pcmcia_write_reg;
+			priv->can.clock.freq = EMS_PCMCIA_CAN_CLOCK;
+			priv->ocr = EMS_PCMCIA_OCR;
+			priv->cdr = EMS_PCMCIA_CDR;
+			priv->flags |= SJA1000_CUSTOM_IRQ_HANDLER;
+
+			/* Register SJA1000 device */
+			err = register_sja1000dev(dev);
+			if (err) {
+				free_sja1000dev(dev);
+				goto failure_cleanup;
+			}
+
+			card->channels++;
+
+			printk(KERN_INFO "%s: registered %s on channel "
+			       "#%d at 0x%p, irq %d\n", DRV_NAME, dev->name,
+			       i, priv->reg_base, dev->irq);
+		} else
+			free_sja1000dev(dev);
+	}
+
+	err = request_irq(dev->irq, &ems_pcmcia_interrupt, IRQF_SHARED,
+			  DRV_NAME, card);
+	if (!err)
+		return 0;
+
+failure_cleanup:
+	ems_pcmcia_del_card(pdev);
+	return err;
+}
+
+/*
+ * Setup PCMCIA socket and probe for EMS CPC-CARD
+ */
+static int __devinit ems_pcmcia_probe(struct pcmcia_device *dev)
+{
+	int csval;
+
+	/* General socket configuration */
+	dev->config_flags |= CONF_ENABLE_IRQ;
+	dev->config_index = 1;
+	dev->config_regs = PRESENT_OPTION;
+
+	/* The io structure describes IO port mapping */
+	dev->resource[0]->end = 16;
+	dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+	dev->resource[1]->end = 16;
+	dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_16;
+	dev->io_lines = 5;
+
+	/* Allocate a memory window */
+	dev->resource[2]->flags =
+		(WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE);
+	dev->resource[2]->start = dev->resource[2]->end = 0;
+
+	csval = pcmcia_request_window(dev, dev->resource[2], 0);
+	if (csval) {
+		dev_err(&dev->dev, "pcmcia_request_window failed (err=%d)\n",
+			csval);
+		return 0;
+	}
+
+	csval = pcmcia_map_mem_page(dev, dev->resource[2], dev->config_base);
+	if (csval) {
+		dev_err(&dev->dev, "pcmcia_map_mem_page failed (err=%d)\n",
+			csval);
+		return 0;
+	}
+
+	csval = pcmcia_enable_device(dev);
+	if (csval) {
+		dev_err(&dev->dev, "pcmcia_enable_device failed (err=%d)\n",
+			csval);
+		return 0;
+	}
+
+	ems_pcmcia_add_card(dev, dev->resource[2]->start);
+	return 0;
+}
+
+/*
+ * Release claimed resources
+ */
+static void ems_pcmcia_remove(struct pcmcia_device *dev)
+{
+	ems_pcmcia_del_card(dev);
+	pcmcia_disable_device(dev);
+}
+
+static struct pcmcia_driver ems_pcmcia_driver = {
+	.name = DRV_NAME,
+	.probe = ems_pcmcia_probe,
+	.remove = ems_pcmcia_remove,
+	.id_table = ems_pcmcia_tbl,
+};
+
+static int __init ems_pcmcia_init(void)
+{
+	return pcmcia_register_driver(&ems_pcmcia_driver);
+}
+module_init(ems_pcmcia_init);
+
+static void __exit ems_pcmcia_exit(void)
+{
+	pcmcia_unregister_driver(&ems_pcmcia_driver);
+}
+module_exit(ems_pcmcia_exit);
diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c
new file mode 100644
index 0000000..905bce0
--- /dev/null
+++ b/drivers/net/can/sja1000/peak_pci.c
@@ -0,0 +1,291 @@
+/*
+ * Copyright (C) 2007, 2011 Wolfgang Grandegger <wg@grandegger.com>
+ *
+ * Derived from the PCAN project file driver/src/pcan_pci.c:
+ *
+ * Copyright (C) 2001-2006  PEAK System-Technik GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/can.h>
+#include <linux/can/dev.h>
+
+#include "sja1000.h"
+
+MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
+MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCI/PCIe cards");
+MODULE_SUPPORTED_DEVICE("PEAK PCAN PCI/PCIe CAN card");
+MODULE_LICENSE("GPL v2");
+
+#define DRV_NAME  "peak_pci"
+
+struct peak_pci_chan {
+	void __iomem *cfg_base;	     /* Common for all channels */
+	struct net_device *next_dev; /* Chain of network devices */
+	u16 icr_mask;		     /* Interrupt mask for fast ack */
+};
+
+#define PEAK_PCI_CAN_CLOCK	(16000000 / 2)
+
+#define PEAK_PCI_CDR		(CDR_CBP | CDR_CLKOUT_MASK)
+#define PEAK_PCI_OCR		OCR_TX0_PUSHPULL
+
+/*
+ * Important PITA registers
+ */
+#define PITA_ICR		0x00	/* Interrupt control register */
+#define PITA_GPIOICR		0x18	/* GPIO interface control register */
+#define PITA_MISC		0x1C	/* Miscellaneous register */
+
+#define PEAK_PCI_CFG_SIZE	0x1000	/* Size of the config PCI bar */
+#define PEAK_PCI_CHAN_SIZE	0x0400	/* Size used by the channel */
+
+#define PEAK_PCI_VENDOR_ID	0x001C	/* The PCI device and vendor IDs */
+#define PEAK_PCI_DEVICE_ID	0x0001	/* for PCI/PCIe slot cards */
+
+static const u16 peak_pci_icr_masks[] = {0x02, 0x01, 0x40, 0x80};
+
+static DEFINE_PCI_DEVICE_TABLE(peak_pci_tbl) = {
+	{PEAK_PCI_VENDOR_ID, PEAK_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+	{0,}
+};
+
+MODULE_DEVICE_TABLE(pci, peak_pci_tbl);
+
+static u8 peak_pci_read_reg(const struct sja1000_priv *priv, int port)
+{
+	return readb(priv->reg_base + (port << 2));
+}
+
+static void peak_pci_write_reg(const struct sja1000_priv *priv,
+			       int port, u8 val)
+{
+	writeb(val, priv->reg_base + (port << 2));
+}
+
+static void peak_pci_post_irq(const struct sja1000_priv *priv)
+{
+	struct peak_pci_chan *chan = priv->priv;
+	u16 icr;
+
+	/* Select and clear in PITA stored interrupt */
+	icr = readw(chan->cfg_base + PITA_ICR);
+	if (icr & chan->icr_mask)
+		writew(chan->icr_mask, chan->cfg_base + PITA_ICR);
+}
+
+static int __devinit peak_pci_probe(struct pci_dev *pdev,
+				    const struct pci_device_id *ent)
+{
+	struct sja1000_priv *priv;
+	struct peak_pci_chan *chan;
+	struct net_device *dev, *dev0 = NULL;
+	void __iomem *cfg_base, *reg_base;
+	u16 sub_sys_id, icr;
+	int i, err, channels;
+
+	err = pci_enable_device(pdev);
+	if (err)
+		return err;
+
+	err = pci_request_regions(pdev, DRV_NAME);
+	if (err)
+		goto failure_disable_pci;
+
+	err = pci_read_config_word(pdev, 0x2e, &sub_sys_id);
+	if (err)
+		goto failure_release_regions;
+
+	dev_dbg(&pdev->dev, "probing device %04x:%04x:%04x\n",
+		pdev->vendor, pdev->device, sub_sys_id);
+
+	err = pci_write_config_word(pdev, 0x44, 0);
+	if (err)
+		goto failure_release_regions;
+
+	if (sub_sys_id >= 12)
+		channels = 4;
+	else if (sub_sys_id >= 10)
+		channels = 3;
+	else if (sub_sys_id >= 4)
+		channels = 2;
+	else
+		channels = 1;
+
+	cfg_base = pci_iomap(pdev, 0, PEAK_PCI_CFG_SIZE);
+	if (!cfg_base) {
+		dev_err(&pdev->dev, "failed to map PCI resource #0\n");
+		goto failure_release_regions;
+	}
+
+	reg_base = pci_iomap(pdev, 1, PEAK_PCI_CHAN_SIZE * channels);
+	if (!reg_base) {
+		dev_err(&pdev->dev, "failed to map PCI resource #1\n");
+		goto failure_unmap_cfg_base;
+	}
+
+	/* Set GPIO control register */
+	writew(0x0005, cfg_base + PITA_GPIOICR + 2);
+	/* Enable all channels of this card */
+	writeb(0x00, cfg_base + PITA_GPIOICR);
+	/* Toggle reset */
+	writeb(0x05, cfg_base + PITA_MISC + 3);
+	mdelay(5);
+	/* Leave parport mux mode */
+	writeb(0x04, cfg_base + PITA_MISC + 3);
+
+	icr = readw(cfg_base + PITA_ICR + 2);
+
+	for (i = 0; i < channels; i++) {
+		dev = alloc_sja1000dev(sizeof(struct peak_pci_chan));
+		if (!dev) {
+			err = -ENOMEM;
+			goto failure_remove_channels;
+		}
+
+		priv = netdev_priv(dev);
+		chan = priv->priv;
+
+		chan->cfg_base = cfg_base;
+		priv->reg_base = reg_base + i * PEAK_PCI_CHAN_SIZE;
+
+		priv->read_reg = peak_pci_read_reg;
+		priv->write_reg = peak_pci_write_reg;
+		priv->post_irq = peak_pci_post_irq;
+
+		priv->can.clock.freq = PEAK_PCI_CAN_CLOCK;
+		priv->ocr = PEAK_PCI_OCR;
+		priv->cdr = PEAK_PCI_CDR;
+		/* Neither a slave nor a single device distributes the clock */
+		if (channels == 1 || i > 0)
+			priv->cdr |= CDR_CLK_OFF;
+
+		/* Setup interrupt handling */
+		priv->irq_flags = IRQF_SHARED;
+		dev->irq = pdev->irq;
+
+		chan->icr_mask = peak_pci_icr_masks[i];
+		icr |= chan->icr_mask;
+
+		SET_NETDEV_DEV(dev, &pdev->dev);
+
+		err = register_sja1000dev(dev);
+		if (err) {
+			dev_err(&pdev->dev, "failed to register device\n");
+			free_sja1000dev(dev);
+			goto failure_remove_channels;
+		}
+
+		/* Create chain of SJA1000 devices */
+		if (i == 0)
+			dev0 = dev;
+		else
+			chan->next_dev = dev;
+
+		dev_info(&pdev->dev,
+			 "%s at reg_base=0x%p cfg_base=0x%p irq=%d\n",
+			 dev->name, priv->reg_base, chan->cfg_base, dev->irq);
+	}
+
+	pci_set_drvdata(pdev, dev0);
+
+	/* Enable interrupts */
+	writew(icr, cfg_base + PITA_ICR + 2);
+
+	return 0;
+
+failure_remove_channels:
+	/* Disable interrupts */
+	writew(0x0, cfg_base + PITA_ICR + 2);
+
+	for (dev = dev0; dev; dev = chan->next_dev) {
+		unregister_sja1000dev(dev);
+		free_sja1000dev(dev);
+		priv = netdev_priv(dev);
+		chan = priv->priv;
+		dev = chan->next_dev;
+	}
+
+	pci_iounmap(pdev, reg_base);
+
+failure_unmap_cfg_base:
+	pci_iounmap(pdev, cfg_base);
+
+failure_release_regions:
+	pci_release_regions(pdev);
+
+failure_disable_pci:
+	pci_disable_device(pdev);
+
+	return err;
+}
+
+static void __devexit peak_pci_remove(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev); /* First device */
+	struct sja1000_priv *priv = netdev_priv(dev);
+	struct peak_pci_chan *chan = priv->priv;
+	void __iomem *cfg_base = chan->cfg_base;
+	void __iomem *reg_base = priv->reg_base;
+
+	/* Disable interrupts */
+	writew(0x0, cfg_base + PITA_ICR + 2);
+
+	/* Loop over all registered devices */
+	while (1) {
+		dev_info(&pdev->dev, "removing device %s\n", dev->name);
+		unregister_sja1000dev(dev);
+		free_sja1000dev(dev);
+		dev = chan->next_dev;
+		if (!dev)
+			break;
+		priv = netdev_priv(dev);
+		chan = priv->priv;
+	}
+
+	pci_iounmap(pdev, reg_base);
+	pci_iounmap(pdev, cfg_base);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+
+	pci_set_drvdata(pdev, NULL);
+}
+
+static struct pci_driver peak_pci_driver = {
+	.name = DRV_NAME,
+	.id_table = peak_pci_tbl,
+	.probe = peak_pci_probe,
+	.remove = __devexit_p(peak_pci_remove),
+};
+
+static int __init peak_pci_init(void)
+{
+	return pci_register_driver(&peak_pci_driver);
+}
+module_init(peak_pci_init);
+
+static void __exit peak_pci_exit(void)
+{
+	pci_unregister_driver(&peak_pci_driver);
+}
+module_exit(peak_pci_exit);
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index f501bba..04a3f1b 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -40,8 +40,6 @@
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
  * DAMAGE.
  *
- * Send feedback to <socketcan-users@lists.berlios.de>
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/net/can/sja1000/sja1000.h b/drivers/net/can/sja1000/sja1000.h
index 78bd4ec..23fff06 100644
--- a/drivers/net/can/sja1000/sja1000.h
+++ b/drivers/net/can/sja1000/sja1000.h
@@ -40,8 +40,6 @@
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
  * DAMAGE.
  *
- * Send feedback to <socketcan-users@lists.berlios.de>
- *
  */
 
 #ifndef SJA1000_DEV_H
diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c
index 4b70b7e..a979b00 100644
--- a/drivers/net/can/slcan.c
+++ b/drivers/net/can/slcan.c
@@ -35,8 +35,6 @@
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
  * DAMAGE.
  *
- * Send feedback to <socketcan-users@lists.berlios.de>
- *
  */
 
 #include <linux/module.h>
diff --git a/drivers/net/can/vcan.c b/drivers/net/can/vcan.c
index a30b8f4..f93e2d6 100644
--- a/drivers/net/can/vcan.c
+++ b/drivers/net/can/vcan.c
@@ -37,8 +37,6 @@
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
  * DAMAGE.
  *
- * Send feedback to <socketcan-users@lists.berlios.de>
- *
  */
 
 #include <linux/module.h>