chelsio: Move the Chelsio drivers

Moves the drivers for the Chelsio chipsets into
drivers/net/ethernet/chelsio/ and the necessary Kconfig and Makefile
changes.

CC: Divy Le Ray <divy@chelsio.com>
CC: Dimitris Michailidis <dm@chelsio.com>
CC: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 0 insertions, 209 deletions

diff --git a/drivers/net/chelsio/my3126.c b/drivers/net/chelsio/my3126.c
deleted file mode 100644
index a683fd3..0000000
--- a/drivers/net/chelsio/my3126.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/* $Date: 2005/11/12 02:13:49 $ $RCSfile: my3126.c,v $ $Revision: 1.15 $ */
-#include "cphy.h"
-#include "elmer0.h"
-#include "suni1x10gexp_regs.h"
-
-/* Port Reset */
-static int my3126_reset(struct cphy *cphy, int wait)
-{
-	/*
-	 * This can be done through registers.  It is not required since
-	 * a full chip reset is used.
-	 */
-	return 0;
-}
-
-static int my3126_interrupt_enable(struct cphy *cphy)
-{
-	schedule_delayed_work(&cphy->phy_update, HZ/30);
-	t1_tpi_read(cphy->adapter, A_ELMER0_GPO, &cphy->elmer_gpo);
-	return 0;
-}
-
-static int my3126_interrupt_disable(struct cphy *cphy)
-{
-	cancel_delayed_work_sync(&cphy->phy_update);
-	return 0;
-}
-
-static int my3126_interrupt_clear(struct cphy *cphy)
-{
-	return 0;
-}
-
-#define OFFSET(REG_ADDR)    (REG_ADDR << 2)
-
-static int my3126_interrupt_handler(struct cphy *cphy)
-{
-	u32 val;
-	u16 val16;
-	u16 status;
-	u32 act_count;
-	adapter_t *adapter;
-	adapter = cphy->adapter;
-
-	if (cphy->count == 50) {
-		cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val);
-		val16 = (u16) val;
-		status = cphy->bmsr ^ val16;
-
-		if (status & MDIO_STAT1_LSTATUS)
-			t1_link_changed(adapter, 0);
-		cphy->bmsr = val16;
-
-		/* We have only enabled link change interrupts so it
-		   must be that
-		 */
-		cphy->count = 0;
-	}
-
-	t1_tpi_write(adapter, OFFSET(SUNI1x10GEXP_REG_MSTAT_CONTROL),
-		SUNI1x10GEXP_BITMSK_MSTAT_SNAP);
-	t1_tpi_read(adapter,
-		OFFSET(SUNI1x10GEXP_REG_MSTAT_COUNTER_1_LOW), &act_count);
-	t1_tpi_read(adapter,
-		OFFSET(SUNI1x10GEXP_REG_MSTAT_COUNTER_33_LOW), &val);
-	act_count += val;
-
-	/* Populate elmer_gpo with the register value */
-	t1_tpi_read(adapter, A_ELMER0_GPO, &val);
-	cphy->elmer_gpo = val;
-
-	if ( (val & (1 << 8)) || (val & (1 << 19)) ||
-	     (cphy->act_count == act_count) || cphy->act_on ) {
-		if (is_T2(adapter))
-			val |= (1 << 9);
-		else if (t1_is_T1B(adapter))
-			val |= (1 << 20);
-		cphy->act_on = 0;
-	} else {
-		if (is_T2(adapter))
-			val &= ~(1 << 9);
-		else if (t1_is_T1B(adapter))
-			val &= ~(1 << 20);
-		cphy->act_on = 1;
-	}
-
-	t1_tpi_write(adapter, A_ELMER0_GPO, val);
-
-	cphy->elmer_gpo = val;
-	cphy->act_count = act_count;
-	cphy->count++;
-
-	return cphy_cause_link_change;
-}
-
-static void my3216_poll(struct work_struct *work)
-{
-	struct cphy *cphy = container_of(work, struct cphy, phy_update.work);
-
-	my3126_interrupt_handler(cphy);
-}
-
-static int my3126_set_loopback(struct cphy *cphy, int on)
-{
-	return 0;
-}
-
-/* To check the activity LED */
-static int my3126_get_link_status(struct cphy *cphy,
-			int *link_ok, int *speed, int *duplex, int *fc)
-{
-	u32 val;
-	u16 val16;
-	adapter_t *adapter;
-
-	adapter = cphy->adapter;
-	cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val);
-	val16 = (u16) val;
-
-	/* Populate elmer_gpo with the register value */
-	t1_tpi_read(adapter, A_ELMER0_GPO, &val);
-	cphy->elmer_gpo = val;
-
-	*link_ok = (val16 & MDIO_STAT1_LSTATUS);
-
-	if (*link_ok) {
-		/* Turn on the LED. */
-		if (is_T2(adapter))
-			 val &= ~(1 << 8);
-		else if (t1_is_T1B(adapter))
-			 val &= ~(1 << 19);
-	} else {
-		/* Turn off the LED. */
-		if (is_T2(adapter))
-			 val |= (1 << 8);
-		else if (t1_is_T1B(adapter))
-			 val |= (1 << 19);
-	}
-
-	t1_tpi_write(adapter, A_ELMER0_GPO, val);
-	cphy->elmer_gpo = val;
-	*speed = SPEED_10000;
-	*duplex = DUPLEX_FULL;
-
-	/* need to add flow control */
-	if (fc)
-		*fc = PAUSE_RX | PAUSE_TX;
-
-	return 0;
-}
-
-static void my3126_destroy(struct cphy *cphy)
-{
-	kfree(cphy);
-}
-
-static struct cphy_ops my3126_ops = {
-	.destroy		= my3126_destroy,
-	.reset			= my3126_reset,
-	.interrupt_enable	= my3126_interrupt_enable,
-	.interrupt_disable	= my3126_interrupt_disable,
-	.interrupt_clear	= my3126_interrupt_clear,
-	.interrupt_handler	= my3126_interrupt_handler,
-	.get_link_status	= my3126_get_link_status,
-	.set_loopback		= my3126_set_loopback,
-	.mmds			= (MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS |
-				   MDIO_DEVS_PHYXS),
-};
-
-static struct cphy *my3126_phy_create(struct net_device *dev,
-			int phy_addr, const struct mdio_ops *mdio_ops)
-{
-	struct cphy *cphy = kzalloc(sizeof (*cphy), GFP_KERNEL);
-
-	if (!cphy)
-		return NULL;
-
-	cphy_init(cphy, dev, phy_addr, &my3126_ops, mdio_ops);
-	INIT_DELAYED_WORK(&cphy->phy_update, my3216_poll);
-	cphy->bmsr = 0;
-
-	return cphy;
-}
-
-/* Chip Reset */
-static int my3126_phy_reset(adapter_t * adapter)
-{
-	u32 val;
-
-	t1_tpi_read(adapter, A_ELMER0_GPO, &val);
-	val &= ~4;
-	t1_tpi_write(adapter, A_ELMER0_GPO, val);
-	msleep(100);
-
-	t1_tpi_write(adapter, A_ELMER0_GPO, val | 4);
-	msleep(1000);
-
-	/* Now lets enable the Laser. Delay 100us */
-	t1_tpi_read(adapter, A_ELMER0_GPO, &val);
-	val |= 0x8000;
-	t1_tpi_write(adapter, A_ELMER0_GPO, val);
-	udelay(100);
-	return 0;
-}
-
-const struct gphy t1_my3126_ops = {
-	.create = my3126_phy_create,
-	.reset = my3126_phy_reset
-};