Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking update from David Miller:

 1) Checkpoint/restarted TCP sockets now can properly propagate the TCP
    timestamp offset.  From Andrey Vagin.

 2) VMWARE VM VSOCK layer, from Andy King.

 3) Much improved support for virtual functions and SR-IOV in bnx2x,
    from Ariel ELior.

 4) All protocols on ipv4 and ipv6 are now network namespace aware, and
    all the compatability checks for initial-namespace-only protocols is
    removed.  Thanks to Tom Parkin for helping deal with the last major
    holdout, L2TP.

 5) IPV6 support in netpoll and network namespace support in pktgen,
    from Cong Wang.

 6) Multiple Registration Protocol (MRP) and Multiple VLAN Registration
    Protocol (MVRP) support, from David Ward.

 7) Compute packet lengths more accurately in the packet scheduler, from
    Eric Dumazet.

 8) Use per-task page fragment allocator in skb_append_datato_frags(),
    also from Eric Dumazet.

 9) Add support for connection tracking labels in netfilter, from
    Florian Westphal.

10) Fix default multicast group joining on ipv6, and add anti-spoofing
    checks to 6to4 and 6rd.  From Hannes Frederic Sowa.

11) Make ipv4/ipv6 fragmentation memory limits more reasonable in modern
    times, rearrange inet frag datastructures for better cacheline
    locality, and move more operations outside of locking.  From Jesper
    Dangaard Brouer.

12) Instead of strict master <--> slave relationships, allow arbitrary
    scenerios with "upper device lists".  From Jiri Pirko.

13) Improve rate limiting accuracy in TBF and act_police, also from Jiri
    Pirko.

14) Add a BPF filter netfilter match target, from Willem de Bruijn.

15) Orphan and delete a bunch of pre-historic networking drivers from
    Paul Gortmaker.

16) Add TSO support for GRE tunnels, from Pravin B SHelar.  Although
    this still needs some minor bug fixing before it's %100 correct in
    all cases.

17) Handle unresolved IPSEC states like ARP, with a resolution packet
    queue.  From Steffen Klassert.

18) Remove TCP Appropriate Byte Count support (ABC), from Stephen
    Hemminger.  This was long overdue.

19) Support SO_REUSEPORT, from Tom Herbert.

20) Allow locking a socket BPF filter, so that it cannot change after a
    process drops capabilities.

21) Add VLAN filtering to bridge, from Vlad Yasevich.

22) Bring ipv6 on-par with ipv4 and do not cache neighbour entries in
    the ipv6 routes, from YOSHIFUJI Hideaki.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1538 commits)
  ipv6: fix race condition regarding dst->expires and dst->from.
  net: fix a wrong assignment in skb_split()
  ip_gre: remove an extra dst_release()
  ppp: set qdisc_tx_busylock to avoid LOCKDEP splat
  atl1c: restore buffer state
  net: fix a build failure when !CONFIG_PROC_FS
  net: ipv4: fix waring -Wunused-variable
  net: proc: fix build failed when procfs is not configured
  Revert "xen: netback: remove redundant xenvif_put"
  net: move procfs code to net/core/net-procfs.c
  qmi_wwan, cdc-ether: add ADU960S
  bonding: set sysfs device_type to 'bond'
  bonding: fix bond_release_all inconsistencies
  b44: use netdev_alloc_skb_ip_align()
  xen: netback: remove redundant xenvif_put
  net: fec: Do a sanity check on the gpio number
  ip_gre: propogate target device GSO capability to the tunnel device
  ip_gre: allow CSUM capable devices to handle packets
  bonding: Fix initialize after use for 3ad machine state spinlock
  bonding: Fix race condition between bond_enslave() and bond_3ad_update_lacp_rate()
  ...

1 files changed, 41 insertions, 84 deletions

diff --git a/drivers/net/dsa/mv88e6123_61_65.c b/drivers/net/dsa/mv88e6123_61_65.c
index c17c75b..41ee5b6 100644
--- a/drivers/net/dsa/mv88e6123_61_65.c
+++ b/drivers/net/dsa/mv88e6123_61_65.c
@@ -8,6 +8,8 @@
  * (at your option) any later version.
  */
 
+#include <linux/delay.h>
+#include <linux/jiffies.h>
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/netdevice.h>
@@ -50,36 +52,30 @@ static int mv88e6123_61_65_switch_reset(struct dsa_switch *ds)
 {
 	int i;
 	int ret;
+	unsigned long timeout;
 
-	/*
-	 * Set all ports to the disabled state.
-	 */
+	/* Set all ports to the disabled state. */
 	for (i = 0; i < 8; i++) {
 		ret = REG_READ(REG_PORT(i), 0x04);
 		REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
 	}
 
-	/*
-	 * Wait for transmit queues to drain.
-	 */
-	msleep(2);
+	/* Wait for transmit queues to drain. */
+	usleep_range(2000, 4000);
 
-	/*
-	 * Reset the switch.
-	 */
+	/* Reset the switch. */
 	REG_WRITE(REG_GLOBAL, 0x04, 0xc400);
 
-	/*
-	 * Wait up to one second for reset to complete.
-	 */
-	for (i = 0; i < 1000; i++) {
+	/* Wait up to one second for reset to complete. */
+	timeout = jiffies + 1 * HZ;
+	while (time_before(jiffies, timeout)) {
 		ret = REG_READ(REG_GLOBAL, 0x00);
 		if ((ret & 0xc800) == 0xc800)
 			break;
 
-		msleep(1);
+		usleep_range(1000, 2000);
 	}
-	if (i == 1000)
+	if (time_after(jiffies, timeout))
 		return -ETIMEDOUT;
 
 	return 0;
@@ -90,54 +86,45 @@ static int mv88e6123_61_65_setup_global(struct dsa_switch *ds)
 	int ret;
 	int i;
 
-	/*
-	 * Disable the PHY polling unit (since there won't be any
+	/* Disable the PHY polling unit (since there won't be any
 	 * external PHYs to poll), don't discard packets with
 	 * excessive collisions, and mask all interrupt sources.
 	 */
 	REG_WRITE(REG_GLOBAL, 0x04, 0x0000);
 
-	/*
-	 * Set the default address aging time to 5 minutes, and
+	/* Set the default address aging time to 5 minutes, and
 	 * enable address learn messages to be sent to all message
 	 * ports.
 	 */
 	REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
 
-	/*
-	 * Configure the priority mapping registers.
-	 */
+	/* Configure the priority mapping registers. */
 	ret = mv88e6xxx_config_prio(ds);
 	if (ret < 0)
 		return ret;
 
-	/*
-	 * Configure the upstream port, and configure the upstream
+	/* Configure the upstream port, and configure the upstream
 	 * port as the port to which ingress and egress monitor frames
 	 * are to be sent.
 	 */
 	REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1110));
 
-	/*
-	 * Disable remote management for now, and set the switch's
+	/* Disable remote management for now, and set the switch's
 	 * DSA device number.
 	 */
 	REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f);
 
-	/*
-	 * Send all frames with destination addresses matching
+	/* Send all frames with destination addresses matching
 	 * 01:80:c2:00:00:2x to the CPU port.
 	 */
 	REG_WRITE(REG_GLOBAL2, 0x02, 0xffff);
 
-	/*
-	 * Send all frames with destination addresses matching
+	/* Send all frames with destination addresses matching
 	 * 01:80:c2:00:00:0x to the CPU port.
 	 */
 	REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
 
-	/*
-	 * Disable the loopback filter, disable flow control
+	/* Disable the loopback filter, disable flow control
 	 * messages, disable flood broadcast override, disable
 	 * removing of provider tags, disable ATU age violation
 	 * interrupts, disable tag flow control, force flow
@@ -146,9 +133,7 @@ static int mv88e6123_61_65_setup_global(struct dsa_switch *ds)
 	 */
 	REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
 
-	/*
-	 * Program the DSA routing table.
-	 */
+	/* Program the DSA routing table. */
 	for (i = 0; i < 32; i++) {
 		int nexthop;
 
@@ -159,33 +144,24 @@ static int mv88e6123_61_65_setup_global(struct dsa_switch *ds)
 		REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
 	}
 
-	/*
-	 * Clear all trunk masks.
-	 */
+	/* Clear all trunk masks. */
 	for (i = 0; i < 8; i++)
 		REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0xff);
 
-	/*
-	 * Clear all trunk mappings.
-	 */
+	/* Clear all trunk mappings. */
 	for (i = 0; i < 16; i++)
 		REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
 
-	/*
-	 * Disable ingress rate limiting by resetting all ingress
+	/* Disable ingress rate limiting by resetting all ingress
 	 * rate limit registers to their initial state.
 	 */
 	for (i = 0; i < 6; i++)
 		REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 | (i << 8));
 
-	/*
-	 * Initialise cross-chip port VLAN table to reset defaults.
-	 */
+	/* Initialise cross-chip port VLAN table to reset defaults. */
 	REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000);
 
-	/*
-	 * Clear the priority override table.
-	 */
+	/* Clear the priority override table. */
 	for (i = 0; i < 16; i++)
 		REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 | (i << 8));
 
@@ -199,8 +175,7 @@ static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
 	int addr = REG_PORT(p);
 	u16 val;
 
-	/*
-	 * MAC Forcing register: don't force link, speed, duplex
+	/* MAC Forcing register: don't force link, speed, duplex
 	 * or flow control state to any particular values on physical
 	 * ports, but force the CPU port and all DSA ports to 1000 Mb/s
 	 * full duplex.
@@ -210,15 +185,13 @@ static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
 	else
 		REG_WRITE(addr, 0x01, 0x0003);
 
-	/*
-	 * Do not limit the period of time that this port can be
+	/* Do not limit the period of time that this port can be
 	 * paused for by the remote end or the period of time that
 	 * this port can pause the remote end.
 	 */
 	REG_WRITE(addr, 0x02, 0x0000);
 
-	/*
-	 * Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
+	/* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
 	 * disable Header mode, enable IGMP/MLD snooping, disable VLAN
 	 * tunneling, determine priority by looking at 802.1p and IP
 	 * priority fields (IP prio has precedence), and set STP state
@@ -245,14 +218,12 @@ static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
 		val |= 0x000c;
 	REG_WRITE(addr, 0x04, val);
 
-	/*
-	 * Port Control 1: disable trunking.  Also, if this is the
+	/* Port Control 1: disable trunking.  Also, if this is the
 	 * CPU port, enable learn messages to be sent to this port.
 	 */
 	REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000);
 
-	/*
-	 * Port based VLAN map: give each port its own address
+	/* Port based VLAN map: give each port its own address
 	 * database, allow the CPU port to talk to each of the 'real'
 	 * ports, and allow each of the 'real' ports to only talk to
 	 * the upstream port.
@@ -264,14 +235,12 @@ static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
 		val |= 1 << dsa_upstream_port(ds);
 	REG_WRITE(addr, 0x06, val);
 
-	/*
-	 * Default VLAN ID and priority: don't set a default VLAN
+	/* Default VLAN ID and priority: don't set a default VLAN
 	 * ID, and set the default packet priority to zero.
 	 */
 	REG_WRITE(addr, 0x07, 0x0000);
 
-	/*
-	 * Port Control 2: don't force a good FCS, set the maximum
+	/* Port Control 2: don't force a good FCS, set the maximum
 	 * frame size to 10240 bytes, don't let the switch add or
 	 * strip 802.1q tags, don't discard tagged or untagged frames
 	 * on this port, do a destination address lookup on all
@@ -281,48 +250,36 @@ static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
 	 */
 	REG_WRITE(addr, 0x08, 0x2080);
 
-	/*
-	 * Egress rate control: disable egress rate control.
-	 */
+	/* Egress rate control: disable egress rate control. */
 	REG_WRITE(addr, 0x09, 0x0001);
 
-	/*
-	 * Egress rate control 2: disable egress rate control.
-	 */
+	/* Egress rate control 2: disable egress rate control. */
 	REG_WRITE(addr, 0x0a, 0x0000);
 
-	/*
-	 * Port Association Vector: when learning source addresses
+	/* Port Association Vector: when learning source addresses
 	 * of packets, add the address to the address database using
 	 * a port bitmap that has only the bit for this port set and
 	 * the other bits clear.
 	 */
 	REG_WRITE(addr, 0x0b, 1 << p);
 
-	/*
-	 * Port ATU control: disable limiting the number of address
+	/* Port ATU control: disable limiting the number of address
 	 * database entries that this port is allowed to use.
 	 */
 	REG_WRITE(addr, 0x0c, 0x0000);
 
-	/*
-	 * Priorit Override: disable DA, SA and VTU priority override.
-	 */
+	/* Priority Override: disable DA, SA and VTU priority override. */
 	REG_WRITE(addr, 0x0d, 0x0000);
 
-	/*
-	 * Port Ethertype: use the Ethertype DSA Ethertype value.
-	 */
+	/* Port Ethertype: use the Ethertype DSA Ethertype value. */
 	REG_WRITE(addr, 0x0f, ETH_P_EDSA);
 
-	/*
-	 * Tag Remap: use an identity 802.1p prio -> switch prio
+	/* Tag Remap: use an identity 802.1p prio -> switch prio
 	 * mapping.
 	 */
 	REG_WRITE(addr, 0x18, 0x3210);
 
-	/*
-	 * Tag Remap 2: use an identity 802.1p prio -> switch prio
+	/* Tag Remap 2: use an identity 802.1p prio -> switch prio
 	 * mapping.
 	 */
 	REG_WRITE(addr, 0x19, 0x7654);