fmd: fmd19 integration

Add fmd19 codebase, plus a minimal set of sources from dpaa-eth,
necessary for bare compilation

Change-Id: I390df8717671204e3d98a987135393bef4534e95
Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com>
Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/1029
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>

1 files changed, 112 insertions, 0 deletions

diff --git a/drivers/net/ethernet/freescale/fman/Kconfig b/drivers/net/ethernet/freescale/fman/Kconfig
new file mode 100644
index 0000000..e640465
--- /dev/null
+++ b/drivers/net/ethernet/freescale/fman/Kconfig
@@ -0,0 +1,112 @@
+menu "Frame Manager support"
+
+menuconfig FSL_FMAN
+	bool "Freescale Frame Manager (datapath) support"
+	# depends on PPC_E500MC
+	default y
+	---help---
+		If unsure, say Y.
+
+if FSL_FMAN
+
+config FSL_FMAN_TEST
+	bool "FMan test module"
+	default n
+	---help---
+		This option compiles test code for FMan.
+
+menu "FMAN Processor support"
+choice
+	depends on FSL_FMAN
+	prompt "Processor Type"
+
+config FMAN_P3040_P4080_P5020
+	bool "P3040 P4080 5020"
+
+config FMAN_P1023
+	bool "P1023"
+
+config FMAN_T4240
+	bool "T4240"
+
+endchoice
+endmenu
+
+config FMAN_RESOURCE_ALLOCATION_ALGORITHM
+	bool "Enable FMan dynamic resource allocation algorithm"
+	default n
+	---help---
+		Enables algorithm for dynamic resource allocation
+
+config FMAN_DISABLE_OH_TO_REUSE_RESOURCES
+	depends on FMAN_RESOURCE_ALLOCATION_ALGORITHM
+	bool "Disable offline parsing ports to reuse resources"
+	default n
+	---help---
+		Redistributes FMan OH's resources to all other ports,
+		thus enabling other configurations.
+
+config FMAN_MIB_CNT_OVF_IRQ_EN
+	bool "Enable the dTSEC MIB counters overflow interrupt"
+	default n
+	---help---
+		Enable the dTSEC MIB counters overflow interrupt to get
+		accurate MIB counters values. Enabled it compensates
+		for the counters overflow but reduces performance and
+		triggers error messages in HV setups.
+
+
+config FSL_FM_MAX_FRAME_SIZE
+	int "Maximum L2 frame size"
+	depends on FSL_FMAN
+	range 64 9600
+	default "1522"
+	help
+		Configure this in relation to the maximum possible MTU of your
+		network configuration. In particular, one would need to
+		increase this value in order to use jumbo frames.
+		FSL_FM_MAX_FRAME_SIZE must accomodate the Ethernet FCS (4 bytes)
+		and one ETH+VLAN header (18 bytes), to a total of 22 bytes in
+		excess of the desired L3 MTU.
+
+		Note that having too large a FSL_FM_MAX_FRAME_SIZE (much larger
+		than the actual MTU) may lead to buffer exhaustion, especially
+		in the case of badly fragmented datagrams on the Rx path.
+		Conversely, having a FSL_FM_MAX_FRAME_SIZE smaller than the actual
+		MTU will lead to frames being dropped.
+
+		This can be overridden by specifying "fsl_fm_max_frm" in
+		the kernel bootargs:
+		 * in Hypervisor-based scenarios, by adding a "chosen" node
+		with the "bootargs" property specifying
+		"fsl_fm_max_frm=<YourValue>";
+		 * in non-Hypervisor-based scenarios, via u-boot's env, by
+		modifying the "bootargs" env variable.
+
+config FSL_FM_RX_EXTRA_HEADROOM
+	int "Add extra headroom at beginning of data buffers"
+	depends on FSL_FMAN
+	range 0 384
+	default "64"
+	help
+		Configure this to tell the Frame Manager to reserve some extra
+		space at the beginning of a data buffer on the receive path,
+		before Internal Context fields are copied. This is in addition
+		to the private data area already reserved for driver internal
+		use. The option does not affect in any way the layout of
+		transmitted buffers. You may be required to enable the config
+		option FMAN_RESOURCE_ALLOCATION_ALGORITHM and also
+		FMAN_DISABLE_OH_TO_REUSE_RESOURCES to have enough resources
+		when using this option and also supporting jumbo frames.
+
+		This setting can be overridden by specifying
+		"fsl_fm_rx_extra_headroom" in the kernel bootargs:
+		 * in Hypervisor-based scenarios, by adding a "chosen" node
+		with the "bootargs" property specifying
+		"fsl_fm_rx_extra_headroom=<YourValue>";
+		 * in non-Hypervisor-based scenarios, via u-boot's env, by
+		modifying the "bootargs" env variable.
+
+endif # FSL_FMAN
+
+endmenu