phy/marvell: select copper registers in SGMII to copper mode

For the Marvel 88e1111 PHY only two SGMII modes are available, both
allowing only SGMII to copper mode (with or without clock). SGMII
to fiber mode is not supported. Make sure the fiber/copper registers
selector bit is cleared, selecting copper mode registers. The bit is
found set after the Auto-Negotiation restart erratum is performed.

Change-Id: I21c829260e0f2440f66170d5d8721e7569d8154d
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
(cherry picked from commit 2db23c6bd45fc4e6833dd86bb3ca28e37199b6ba)
Reviewed-on: http://git.am.freescale.net:8181/1028
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>

0 files changed, 0 insertions, 0 deletions