ixgbe: Clean up priority based flow control

This change cleans up the logic in the priority based flow control
configuration routines.  Both the 82599 and 82598 based routines perform
similar functions however they are both arranged completely differently.
This patch goes over both of them to clean up the code.

In addition I am dropping the ixgbe_fc_pfc flow control mode and instead
just replacing it with checks for if priority flow control is enabled.
This allows us to maintain some of the link flow control information which
allows for an easier transition between link and priority flow control.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 31 insertions, 38 deletions

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c
index d3695ed..87592b4 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c
@@ -191,53 +191,46 @@ s32 ixgbe_dcb_config_tx_data_arbiter_82598(struct ixgbe_hw *hw,
  */
 s32 ixgbe_dcb_config_pfc_82598(struct ixgbe_hw *hw, u8 pfc_en)
 {
-	u32 reg;
+	u32 fcrtl, reg;
 	u8  i;
 
-	if (pfc_en) {
-		/* Enable Transmit Priority Flow Control */
-		reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
-		reg &= ~IXGBE_RMCS_TFCE_802_3X;
-		/* correct the reporting of our flow control status */
-		reg |= IXGBE_RMCS_TFCE_PRIORITY;
-		IXGBE_WRITE_REG(hw, IXGBE_RMCS, reg);
-
-		/* Enable Receive Priority Flow Control */
-		reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
-		reg &= ~IXGBE_FCTRL_RFCE;
-		reg |= IXGBE_FCTRL_RPFCE;
-		IXGBE_WRITE_REG(hw, IXGBE_FCTRL, reg);
-
-		/* Configure pause time */
-		for (i = 0; i < (MAX_TRAFFIC_CLASS >> 1); i++)
-			IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), 0x68006800);
+	/* Enable Transmit Priority Flow Control */
+	reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
+	reg &= ~IXGBE_RMCS_TFCE_802_3X;
+	reg |= IXGBE_RMCS_TFCE_PRIORITY;
+	IXGBE_WRITE_REG(hw, IXGBE_RMCS, reg);
 
-		/* Configure flow control refresh threshold value */
-		IXGBE_WRITE_REG(hw, IXGBE_FCRTV, 0x3400);
-	}
+	/* Enable Receive Priority Flow Control */
+	reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+	reg &= ~(IXGBE_FCTRL_RPFCE | IXGBE_FCTRL_RFCE);
 
-	/*
-	 * Configure flow control thresholds and enable priority flow control
-	 * for each traffic class.
-	 */
-	for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
-		int enabled = pfc_en & (1 << i);
+	if (pfc_en)
+		reg |= IXGBE_FCTRL_RPFCE;
 
-		reg = hw->fc.low_water << 10;
+	IXGBE_WRITE_REG(hw, IXGBE_FCTRL, reg);
 
-		if (enabled == pfc_enabled_tx ||
-		    enabled == pfc_enabled_full)
-			reg |= IXGBE_FCRTL_XONE;
+	fcrtl = (hw->fc.low_water << 10) | IXGBE_FCRTL_XONE;
+	/* Configure PFC Tx thresholds per TC */
+	for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+		if (!(pfc_en & (1 << i))) {
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), 0);
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), 0);
+			continue;
+		}
+
+		reg = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN;
+		IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), fcrtl);
+		IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), reg);
+	}
 
-		IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), reg);
+	/* Configure pause time */
+	reg = hw->fc.pause_time * 0x00010001;
+	for (i = 0; i < (MAX_TRAFFIC_CLASS / 2); i++)
+		IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
 
-		reg = hw->fc.high_water[i] << 10;
-		if (enabled == pfc_enabled_tx ||
-		    enabled == pfc_enabled_full)
-			reg |= IXGBE_FCRTH_FCEN;
+	/* Configure flow control refresh threshold value */
+	IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2);
 
-		IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), reg);
-	}
 
 	return 0;
 }