diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/hydra.h | |
download | linux-fsl-qoriq-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/net/hydra.h')
-rw-r--r-- | drivers/net/hydra.h | 177 |
1 files changed, 177 insertions, 0 deletions
diff --git a/drivers/net/hydra.h b/drivers/net/hydra.h new file mode 100644 index 0000000..3741414 --- /dev/null +++ b/drivers/net/hydra.h @@ -0,0 +1,177 @@ +/* $Linux: hydra.h,v 1.0 1994/10/26 02:03:47 cgd Exp $ */ + +/* + * Copyright (c) 1994 Timo Rossi + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Timo Rossi + * 4. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * The Hydra Systems card uses the National Semiconductor + * 8390 NIC (Network Interface Controller) chip, located + * at card base address + 0xffe1. NIC registers are accessible + * only at odd byte addresses, so the register offsets must + * be multiplied by two. + * + * Card address PROM is located at card base + 0xffc0 (even byte addresses) + * + * RAM starts at the card base address, and is 16K or 64K. + * The current Amiga NetBSD hydra driver is hardwired for 16K. + * It seems that the RAM should be accessed as words or longwords only. + * + */ + +/* adapted for Linux by Topi Kanerva 03/29/95 + with original author's permission */ + +#define HYDRA_NIC_BASE 0xffe1 + +/* Page0 registers */ + +#define NIC_CR 0 /* Command register */ +#define NIC_PSTART (1*2) /* Page start (write) */ +#define NIC_PSTOP (2*2) /* Page stop (write) */ +#define NIC_BNDRY (3*2) /* Boundary pointer */ +#define NIC_TSR (4*2) /* Transmit status (read) */ +#define NIC_TPSR (4*2) /* Transmit page start (write) */ +#define NIC_NCR (5*2) /* Number of collisions, read */ +#define NIC_TBCR0 (5*2) /* Transmit byte count low (write) */ +#define NIC_FIFO (6*2) /* FIFO reg. (read) */ +#define NIC_TBCR1 (6*2) /* Transmit byte count high (write) */ +#define NIC_ISR (7*2) /* Interrupt status register */ +#define NIC_RBCR0 (0xa*2) /* Remote byte count low (write) */ +#define NIC_RBCR1 (0xb*2) /* Remote byte count high (write) */ +#define NIC_RSR (0xc*2) /* Receive status (read) */ +#define NIC_RCR (0xc*2) /* Receive config (write) */ +#define NIC_CNTR0 (0xd*2) /* Frame alignment error count (read) */ +#define NIC_TCR (0xd*2) /* Transmit config (write) */ +#define NIC_CNTR1 (0xe*2) /* CRC error counter (read) */ +#define NIC_DCR (0xe*2) /* Data config (write) */ +#define NIC_CNTR2 (0xf*2) /* missed packet counter (read) */ +#define NIC_IMR (0xf*2) /* Interrupt mask reg. (write) */ + +/* Page1 registers */ + +#define NIC_PAR0 (1*2) /* Physical address */ +#define NIC_PAR1 (2*2) +#define NIC_PAR2 (3*2) +#define NIC_PAR3 (4*2) +#define NIC_PAR4 (5*2) +#define NIC_PAR5 (6*2) +#define NIC_CURR (7*2) /* Current RX ring-buffer page */ +#define NIC_MAR0 (8*2) /* Multicast address */ +#define NIC_MAR1 (9*2) +#define NIC_MAR2 (0xa*2) +#define NIC_MAR3 (0xb*2) +#define NIC_MAR4 (0xc*2) +#define NIC_MAR5 (0xd*2) +#define NIC_MAR6 (0xe*2) +#define NIC_MAR7 (0xf*2) + +/* Command register definitions */ + +#define CR_STOP 0x01 /* Stop -- software reset command */ +#define CR_START 0x02 /* Start */ +#define CR_TXP 0x04 /* Transmit packet */ + +#define CR_RD0 0x08 /* Remote DMA cmd */ +#define CR_RD1 0x10 +#define CR_RD2 0x20 + +#define CR_NODMA CR_RD2 + +#define CR_PS0 0x40 /* Page select */ +#define CR_PS1 0x80 + +#define CR_PAGE0 0 +#define CR_PAGE1 CR_PS0 +#define CR_PAGE2 CR_PS1 + +/* Interrupt status reg. definitions */ + +#define ISR_PRX 0x01 /* Packet received without errors */ +#define ISR_PTX 0x02 /* Packet transmitted without errors */ +#define ISR_RXE 0x04 /* Receive error */ +#define ISR_TXE 0x08 /* Transmit error */ +#define ISR_OVW 0x10 /* Ring buffer overrun */ +#define ISR_CNT 0x20 /* Counter overflow */ +#define ISR_RDC 0x40 /* Remote DMA compile */ +#define ISR_RST 0x80 /* Reset status */ + +/* Data config reg. definitions */ + +#define DCR_WTS 0x01 /* Word transfer select */ +#define DCR_BOS 0x02 /* Byte order select */ +#define DCR_LAS 0x04 /* Long address select */ +#define DCR_LS 0x08 /* Loopback select */ +#define DCR_AR 0x10 /* Auto-init remote */ +#define DCR_FT0 0x20 /* FIFO threshold select */ +#define DCR_FT1 0x40 + +/* Transmit config reg. definitions */ + +#define TCR_CRC 0x01 /* Inhibit CRC */ +#define TCR_LB0 0x02 /* Loopback control */ +#define TCR_LB1 0x04 +#define TCR_ATD 0x08 /* Auto transmit disable */ +#define TCR_OFST 0x10 /* Collision offset enable */ + +/* Transmit status reg. definitions */ + +#define TSR_PTX 0x01 /* Packet transmitted */ +#define TSR_COL 0x04 /* Transmit collided */ +#define TSR_ABT 0x08 /* Transmit aborted */ +#define TSR_CRS 0x10 /* Carrier sense lost */ +#define TSR_FU 0x20 /* FIFO underrun */ +#define TSR_CDH 0x40 /* CD Heartbeat */ +#define TSR_OWC 0x80 /* Out of Window Collision */ + +/* Receiver config register definitions */ + +#define RCR_SEP 0x01 /* Save errored packets */ +#define RCR_AR 0x02 /* Accept runt packets */ +#define RCR_AB 0x04 /* Accept broadcast */ +#define RCR_AM 0x08 /* Accept multicast */ +#define RCR_PRO 0x10 /* Promiscuous mode */ +#define RCR_MON 0x20 /* Monitor mode */ + +/* Receiver status register definitions */ + +#define RSR_PRX 0x01 /* Packet received without error */ +#define RSR_CRC 0x02 /* CRC error */ +#define RSR_FAE 0x04 /* Frame alignment error */ +#define RSR_FO 0x08 /* FIFO overrun */ +#define RSR_MPA 0x10 /* Missed packet */ +#define RSR_PHY 0x20 /* Physical address */ +#define RSR_DIS 0x40 /* Received disabled */ +#define RSR_DFR 0x80 /* Deferring (jabber) */ + +/* Hydra System card address PROM offset */ + +#define HYDRA_ADDRPROM 0xffc0 + + |