Merge tag 'v3.10' into sdk-kernel-3.10

git rebase --continue

Linux 3.10

Conflicts:
	Documentation/virtual/kvm/api.txt
	arch/ia64/kvm/Makefile
	arch/powerpc/Kconfig
	arch/powerpc/Makefile
	arch/powerpc/boot/dts/b4420qds.dts
	arch/powerpc/boot/dts/b4860qds.dts
	arch/powerpc/boot/dts/b4qds.dts
	arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
	arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
	arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
	arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
	arch/powerpc/boot/dts/fsl/b4si-post.dtsi
	arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
	arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
	arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
	arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
	arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
	arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
	arch/powerpc/boot/dts/fsl/qonverge-usb2-dr-0.dtsi
	arch/powerpc/boot/dts/fsl/qoriq-sec5.0-0.dtsi
	arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
	arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
	arch/powerpc/boot/dts/p1025rdb_36b.dts
	arch/powerpc/boot/dts/t4240qds.dts
	arch/powerpc/configs/corenet64_smp_defconfig
	arch/powerpc/configs/mpc85xx_defconfig
	arch/powerpc/configs/mpc85xx_smp_defconfig
	arch/powerpc/include/asm/cputable.h
	arch/powerpc/include/asm/kvm_host.h
	arch/powerpc/include/asm/kvm_ppc.h
	arch/powerpc/include/asm/machdep.h
	arch/powerpc/include/uapi/asm/kvm.h
	arch/powerpc/kernel/cpu_setup_fsl_booke.S
	arch/powerpc/kernel/cputable.c
	arch/powerpc/kernel/idle.c
	arch/powerpc/kernel/pci-common.c
	arch/powerpc/kvm/Kconfig
	arch/powerpc/kvm/book3s.c
	arch/powerpc/kvm/booke.c
	arch/powerpc/kvm/e500.c
	arch/powerpc/kvm/e500_mmu.c
	arch/powerpc/kvm/e500_mmu_host.c
	arch/powerpc/kvm/e500mc.c
	arch/powerpc/kvm/emulate.c
	arch/powerpc/kvm/irq.h
	arch/powerpc/kvm/mpic.c
	arch/powerpc/kvm/powerpc.c
	arch/powerpc/mm/tlb_nohash.c
	arch/powerpc/platforms/85xx/Kconfig
	arch/powerpc/platforms/85xx/b4_qds.c
	arch/powerpc/platforms/85xx/t4240_qds.c
	arch/powerpc/platforms/pseries/smp.c
	arch/powerpc/sysdev/fsl_85xx_l2ctlr.c
	arch/powerpc/sysdev/fsl_msi.c
	arch/powerpc/sysdev/fsl_pci.c
	arch/powerpc/sysdev/fsl_pci.h
	arch/powerpc/sysdev/mpic.c
	arch/x86/kvm/Makefile
	arch/x86/kvm/x86.c
	drivers/Kconfig
	drivers/clk/Kconfig
	drivers/cpufreq/Makefile
	drivers/crypto/caam/caamalg.c
	drivers/crypto/caam/intern.h
	drivers/crypto/caam/jr.c
	drivers/crypto/caam/regs.h
	drivers/infiniband/ulp/ipoib/ipoib_ethtool.c
	drivers/iommu/Makefile
	drivers/iommu/amd_iommu.c
	drivers/iommu/exynos-iommu.c
	drivers/iommu/intel-iommu.c
	drivers/iommu/iommu.c
	drivers/iommu/msm_iommu.c
	drivers/iommu/omap-iommu.c
	drivers/iommu/tegra-gart.c
	drivers/iommu/tegra-smmu.c
	drivers/misc/Makefile
	drivers/mmc/card/block.c
	drivers/mmc/card/queue.c
	drivers/mmc/core/core.c
	drivers/mtd/nand/fsl_ifc_nand.c
	drivers/net/ethernet/3com/3c501.c
	drivers/net/ethernet/8390/3c503.c
	drivers/net/ethernet/dec/ewrk3.c
	drivers/net/ethernet/freescale/fec.c
	drivers/net/ethernet/freescale/gianfar.c
	drivers/net/ethernet/freescale/gianfar.h
	drivers/net/ethernet/i825xx/3c505.c
	drivers/net/ethernet/i825xx/3c507.c
	drivers/rtc/rtc-ds3232.c
	drivers/s390/net/qeth_core_main.c
	drivers/staging/Kconfig
	drivers/staging/Makefile
	drivers/staging/ccg/u_ether.c
	drivers/usb/gadget/fsl_udc_core.c
	drivers/usb/otg/fsl_otg.c
	drivers/vfio/vfio.c
	drivers/watchdog/Kconfig
	include/linux/iommu.h
	include/linux/kvm_host.h
	include/linux/mmc/sdhci.h
	include/linux/msi.h
	include/linux/netdev_features.h
	include/linux/pci.h
	include/linux/skbuff.h
	include/net/ip6_route.h
	include/net/sch_generic.h
	include/net/xfrm.h
	include/uapi/linux/kvm.h
	net/core/netpoll.c
	virt/kvm/irqchip.c
	virt/kvm/kvm_main.c

13 files changed, 392 insertions, 127 deletions

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 1d18443..2ab88e5 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -4,7 +4,6 @@
 
 menuconfig PHYLIB
 	tristate "PHY Device support and infrastructure"
-	depends on !S390
 	depends on NETDEVICES
 	help
 	  Ethernet controllers are usually attached to PHY
@@ -137,7 +136,7 @@ config MDIO_BITBANG
 
 config MDIO_GPIO
 	tristate "Support for GPIO lib-based bitbanged MDIO buses"
-	depends on MDIO_BITBANG && GENERIC_GPIO
+	depends on MDIO_BITBANG && GPIOLIB
 	---help---
 	  Supports GPIO lib-based MDIO busses.
 
diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c
index ec40ba8..ff2e45e 100644
--- a/drivers/net/phy/lxt.c
+++ b/drivers/net/phy/lxt.c
@@ -159,7 +159,7 @@ static int lxt973a2_update_link(struct phy_device *phydev)
 	return 0;
 }
 
-int lxt973a2_read_status(struct phy_device *phydev)
+static int lxt973a2_read_status(struct phy_device *phydev)
 {
 	int adv;
 	int err;
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index db59f9e..b0d081b 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -7,6 +7,8 @@
  *
  * Copyright (c) 2004 Freescale Semiconductor, Inc.
  *
+ * Copyright (c) 2013 Michael Stapelberg <michael@stapelberg.de>
+ *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
@@ -82,6 +84,28 @@
 #define MII_88E1318S_PHY_MSCR1_REG	16
 #define MII_88E1318S_PHY_MSCR1_PAD_ODD	BIT(6)
 
+/* Copper Specific Interrupt Enable Register */
+#define MII_88E1318S_PHY_CSIER                              0x12
+/* WOL Event Interrupt Enable */
+#define MII_88E1318S_PHY_CSIER_WOL_EIE                      BIT(7)
+
+/* LED Timer Control Register */
+#define MII_88E1318S_PHY_LED_PAGE                           0x03
+#define MII_88E1318S_PHY_LED_TCR                            0x12
+#define MII_88E1318S_PHY_LED_TCR_FORCE_INT                  BIT(15)
+#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE                BIT(7)
+#define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW             BIT(11)
+
+/* Magic Packet MAC address registers */
+#define MII_88E1318S_PHY_MAGIC_PACKET_WORD2                 0x17
+#define MII_88E1318S_PHY_MAGIC_PACKET_WORD1                 0x18
+#define MII_88E1318S_PHY_MAGIC_PACKET_WORD0                 0x19
+
+#define MII_88E1318S_PHY_WOL_PAGE                           0x11
+#define MII_88E1318S_PHY_WOL_CTRL                           0x10
+#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS          BIT(12)
+#define MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE BIT(14)
+
 #define MII_88E1121_PHY_LED_CTRL	16
 #define MII_88E1121_PHY_LED_PAGE	3
 #define MII_88E1121_PHY_LED_DEF		0x0030
@@ -708,6 +732,107 @@ static int m88e1121_did_interrupt(struct phy_device *phydev)
 	return 0;
 }
 
+static void m88e1318_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
+{
+	wol->supported = WAKE_MAGIC;
+	wol->wolopts = 0;
+
+	if (phy_write(phydev, MII_MARVELL_PHY_PAGE,
+		      MII_88E1318S_PHY_WOL_PAGE) < 0)
+		return;
+
+	if (phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL) &
+	    MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE)
+		wol->wolopts |= WAKE_MAGIC;
+
+	if (phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x00) < 0)
+		return;
+}
+
+static int m88e1318_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
+{
+	int err, oldpage, temp;
+
+	oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
+
+	if (wol->wolopts & WAKE_MAGIC) {
+		/* Explicitly switch to page 0x00, just to be sure */
+		err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x00);
+		if (err < 0)
+			return err;
+
+		/* Enable the WOL interrupt */
+		temp = phy_read(phydev, MII_88E1318S_PHY_CSIER);
+		temp |= MII_88E1318S_PHY_CSIER_WOL_EIE;
+		err = phy_write(phydev, MII_88E1318S_PHY_CSIER, temp);
+		if (err < 0)
+			return err;
+
+		err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
+				MII_88E1318S_PHY_LED_PAGE);
+		if (err < 0)
+			return err;
+
+		/* Setup LED[2] as interrupt pin (active low) */
+		temp = phy_read(phydev, MII_88E1318S_PHY_LED_TCR);
+		temp &= ~MII_88E1318S_PHY_LED_TCR_FORCE_INT;
+		temp |= MII_88E1318S_PHY_LED_TCR_INTn_ENABLE;
+		temp |= MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW;
+		err = phy_write(phydev, MII_88E1318S_PHY_LED_TCR, temp);
+		if (err < 0)
+			return err;
+
+		err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
+				MII_88E1318S_PHY_WOL_PAGE);
+		if (err < 0)
+			return err;
+
+		/* Store the device address for the magic packet */
+		err = phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD2,
+				((phydev->attached_dev->dev_addr[5] << 8) |
+				 phydev->attached_dev->dev_addr[4]));
+		if (err < 0)
+			return err;
+		err = phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD1,
+				((phydev->attached_dev->dev_addr[3] << 8) |
+				 phydev->attached_dev->dev_addr[2]));
+		if (err < 0)
+			return err;
+		err = phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD0,
+				((phydev->attached_dev->dev_addr[1] << 8) |
+				 phydev->attached_dev->dev_addr[0]));
+		if (err < 0)
+			return err;
+
+		/* Clear WOL status and enable magic packet matching */
+		temp = phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL);
+		temp |= MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS;
+		temp |= MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE;
+		err = phy_write(phydev, MII_88E1318S_PHY_WOL_CTRL, temp);
+		if (err < 0)
+			return err;
+	} else {
+		err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
+				MII_88E1318S_PHY_WOL_PAGE);
+		if (err < 0)
+			return err;
+
+		/* Clear WOL status and disable magic packet matching */
+		temp = phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL);
+		temp |= MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS;
+		temp &= ~MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE;
+		err = phy_write(phydev, MII_88E1318S_PHY_WOL_CTRL, temp);
+		if (err < 0)
+			return err;
+	}
+
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
 static struct phy_driver marvell_drivers[] = {
 	{
 		.phy_id = MARVELL_PHY_ID_88E1101,
@@ -784,6 +909,8 @@ static struct phy_driver marvell_drivers[] = {
 		.ack_interrupt = &marvell_ack_interrupt,
 		.config_intr = &marvell_config_intr,
 		.did_interrupt = &m88e1121_did_interrupt,
+		.get_wol = &m88e1318_get_wol,
+		.set_wol = &m88e1318_set_wol,
 		.driver = { .owner = THIS_MODULE },
 	},
 	{
diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c
index 2727498..a47f923 100644
--- a/drivers/net/phy/mdio-gpio.c
+++ b/drivers/net/phy/mdio-gpio.c
@@ -235,17 +235,7 @@ static struct platform_driver mdio_gpio_driver = {
 	},
 };
 
-static int __init mdio_gpio_init(void)
-{
-	return platform_driver_register(&mdio_gpio_driver);
-}
-module_init(mdio_gpio_init);
-
-static void __exit mdio_gpio_exit(void)
-{
-	platform_driver_unregister(&mdio_gpio_driver);
-}
-module_exit(mdio_gpio_exit);
+module_platform_driver(mdio_gpio_driver);
 
 MODULE_ALIAS("platform:mdio-gpio");
 MODULE_AUTHOR("Laurent Pinchart, Paulius Zaleckas");
diff --git a/drivers/net/phy/mdio-mux-gpio.c b/drivers/net/phy/mdio-mux-gpio.c
index 0c9accb..e91d7d7 100644
--- a/drivers/net/phy/mdio-mux-gpio.c
+++ b/drivers/net/phy/mdio-mux-gpio.c
@@ -53,7 +53,7 @@ static int mdio_mux_gpio_probe(struct platform_device *pdev)
 {
 	enum of_gpio_flags f;
 	struct mdio_mux_gpio_state *s;
-	unsigned int num_gpios;
+	int num_gpios;
 	unsigned int n;
 	int r;
 
@@ -61,7 +61,7 @@ static int mdio_mux_gpio_probe(struct platform_device *pdev)
 		return -ENODEV;
 
 	num_gpios = of_gpio_count(pdev->dev.of_node);
-	if (num_gpios == 0 || num_gpios > MDIO_MUX_GPIO_MAX_BITS)
+	if (num_gpios <= 0 || num_gpios > MDIO_MUX_GPIO_MAX_BITS)
 		return -ENODEV;
 
 	s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
diff --git a/drivers/net/phy/mdio-octeon.c b/drivers/net/phy/mdio-octeon.c
index 09297fe..b51fa1f 100644
--- a/drivers/net/phy/mdio-octeon.c
+++ b/drivers/net/phy/mdio-octeon.c
@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2009,2011 Cavium, Inc.
+ * Copyright (C) 2009-2012 Cavium, Inc.
  */
 
 #include <linux/platform_device.h>
@@ -27,30 +27,98 @@
 #define SMI_CLK		0x18
 #define SMI_EN		0x20
 
+enum octeon_mdiobus_mode {
+	UNINIT = 0,
+	C22,
+	C45
+};
+
 struct octeon_mdiobus {
 	struct mii_bus *mii_bus;
 	u64 register_base;
 	resource_size_t mdio_phys;
 	resource_size_t regsize;
+	enum octeon_mdiobus_mode mode;
 	int phy_irq[PHY_MAX_ADDR];
 };
 
+static void octeon_mdiobus_set_mode(struct octeon_mdiobus *p,
+				    enum octeon_mdiobus_mode m)
+{
+	union cvmx_smix_clk smi_clk;
+
+	if (m == p->mode)
+		return;
+
+	smi_clk.u64 = cvmx_read_csr(p->register_base + SMI_CLK);
+	smi_clk.s.mode = (m == C45) ? 1 : 0;
+	smi_clk.s.preamble = 1;
+	cvmx_write_csr(p->register_base + SMI_CLK, smi_clk.u64);
+	p->mode = m;
+}
+
+static int octeon_mdiobus_c45_addr(struct octeon_mdiobus *p,
+				   int phy_id, int regnum)
+{
+	union cvmx_smix_cmd smi_cmd;
+	union cvmx_smix_wr_dat smi_wr;
+	int timeout = 1000;
+
+	octeon_mdiobus_set_mode(p, C45);
+
+	smi_wr.u64 = 0;
+	smi_wr.s.dat = regnum & 0xffff;
+	cvmx_write_csr(p->register_base + SMI_WR_DAT, smi_wr.u64);
+
+	regnum = (regnum >> 16) & 0x1f;
+
+	smi_cmd.u64 = 0;
+	smi_cmd.s.phy_op = 0; /* MDIO_CLAUSE_45_ADDRESS */
+	smi_cmd.s.phy_adr = phy_id;
+	smi_cmd.s.reg_adr = regnum;
+	cvmx_write_csr(p->register_base + SMI_CMD, smi_cmd.u64);
+
+	do {
+		/* Wait 1000 clocks so we don't saturate the RSL bus
+		 * doing reads.
+		 */
+		__delay(1000);
+		smi_wr.u64 = cvmx_read_csr(p->register_base + SMI_WR_DAT);
+	} while (smi_wr.s.pending && --timeout);
+
+	if (timeout <= 0)
+		return -EIO;
+	return 0;
+}
+
 static int octeon_mdiobus_read(struct mii_bus *bus, int phy_id, int regnum)
 {
 	struct octeon_mdiobus *p = bus->priv;
 	union cvmx_smix_cmd smi_cmd;
 	union cvmx_smix_rd_dat smi_rd;
+	unsigned int op = 1; /* MDIO_CLAUSE_22_READ */
 	int timeout = 1000;
 
+	if (regnum & MII_ADDR_C45) {
+		int r = octeon_mdiobus_c45_addr(p, phy_id, regnum);
+		if (r < 0)
+			return r;
+
+		regnum = (regnum >> 16) & 0x1f;
+		op = 3; /* MDIO_CLAUSE_45_READ */
+	} else {
+		octeon_mdiobus_set_mode(p, C22);
+	}
+
+
 	smi_cmd.u64 = 0;
-	smi_cmd.s.phy_op = 1; /* MDIO_CLAUSE_22_READ */
+	smi_cmd.s.phy_op = op;
 	smi_cmd.s.phy_adr = phy_id;
 	smi_cmd.s.reg_adr = regnum;
 	cvmx_write_csr(p->register_base + SMI_CMD, smi_cmd.u64);
 
 	do {
-		/*
-		 * Wait 1000 clocks so we don't saturate the RSL bus
+		/* Wait 1000 clocks so we don't saturate the RSL bus
 		 * doing reads.
 		 */
 		__delay(1000);
@@ -69,21 +137,33 @@ static int octeon_mdiobus_write(struct mii_bus *bus, int phy_id,
 	struct octeon_mdiobus *p = bus->priv;
 	union cvmx_smix_cmd smi_cmd;
 	union cvmx_smix_wr_dat smi_wr;
+	unsigned int op = 0; /* MDIO_CLAUSE_22_WRITE */
 	int timeout = 1000;
 
+
+	if (regnum & MII_ADDR_C45) {
+		int r = octeon_mdiobus_c45_addr(p, phy_id, regnum);
+		if (r < 0)
+			return r;
+
+		regnum = (regnum >> 16) & 0x1f;
+		op = 1; /* MDIO_CLAUSE_45_WRITE */
+	} else {
+		octeon_mdiobus_set_mode(p, C22);
+	}
+
 	smi_wr.u64 = 0;
 	smi_wr.s.dat = val;
 	cvmx_write_csr(p->register_base + SMI_WR_DAT, smi_wr.u64);
 
 	smi_cmd.u64 = 0;
-	smi_cmd.s.phy_op = 0; /* MDIO_CLAUSE_22_WRITE */
+	smi_cmd.s.phy_op = op;
 	smi_cmd.s.phy_adr = phy_id;
 	smi_cmd.s.reg_adr = regnum;
 	cvmx_write_csr(p->register_base + SMI_CMD, smi_cmd.u64);
 
 	do {
-		/*
-		 * Wait 1000 clocks so we don't saturate the RSL bus
+		/* Wait 1000 clocks so we don't saturate the RSL bus
 		 * doing reads.
 		 */
 		__delay(1000);
@@ -197,18 +277,7 @@ void octeon_mdiobus_force_mod_depencency(void)
 }
 EXPORT_SYMBOL(octeon_mdiobus_force_mod_depencency);
 
-static int __init octeon_mdiobus_mod_init(void)
-{
-	return platform_driver_register(&octeon_mdiobus_driver);
-}
-
-static void __exit octeon_mdiobus_mod_exit(void)
-{
-	platform_driver_unregister(&octeon_mdiobus_driver);
-}
-
-module_init(octeon_mdiobus_mod_init);
-module_exit(octeon_mdiobus_mod_exit);
+module_platform_driver(octeon_mdiobus_driver);
 
 MODULE_DESCRIPTION(DRV_DESCRIPTION);
 MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 044b532..dc92097 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -95,7 +95,7 @@ static struct class mdio_bus_class = {
 
 #if IS_ENABLED(CONFIG_OF_MDIO)
 /* Helper function for of_mdio_find_bus */
-static int of_mdio_bus_match(struct device *dev, void *mdio_bus_np)
+static int of_mdio_bus_match(struct device *dev, const void *mdio_bus_np)
 {
 	return dev->of_node == mdio_bus_np;
 }
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index b983596..2510435 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -5,15 +5,20 @@
  *
  * Author: David J. Choi
  *
- * Copyright (c) 2010 Micrel, Inc.
+ * Copyright (c) 2010-2013 Micrel, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  *
- * Support : ksz9021 1000/100/10 phy from Micrel
- *		ks8001, ks8737, ks8721, ks8041, ks8051 100/10 phy
+ * Support : Micrel Phys:
+ *		Giga phys: ksz9021, ksz9031
+ *		100/10 Phys : ksz8001, ksz8721, ksz8737, ksz8041
+ *			   ksz8021, ksz8031, ksz8051,
+ *			   ksz8081, ksz8091,
+ *			   ksz8061,
+ *		Switch : ksz8873, ksz886x
  */
 
 #include <linux/kernel.h>
@@ -48,6 +53,18 @@
 #define KS8737_CTRL_INT_ACTIVE_HIGH		(1 << 14)
 #define KSZ8051_RMII_50MHZ_CLK			(1 << 7)
 
+static int ksz_config_flags(struct phy_device *phydev)
+{
+	int regval;
+
+	if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) {
+		regval = phy_read(phydev, MII_KSZPHY_CTRL);
+		regval |= KSZ8051_RMII_50MHZ_CLK;
+		return phy_write(phydev, MII_KSZPHY_CTRL, regval);
+	}
+	return 0;
+}
+
 static int kszphy_ack_interrupt(struct phy_device *phydev)
 {
 	/* bit[7..0] int status, which is a read and clear register. */
@@ -109,22 +126,19 @@ static int kszphy_config_init(struct phy_device *phydev)
 
 static int ksz8021_config_init(struct phy_device *phydev)
 {
+	int rc;
 	const u16 val = KSZPHY_OMSO_B_CAST_OFF | KSZPHY_OMSO_RMII_OVERRIDE;
 	phy_write(phydev, MII_KSZPHY_OMSO, val);
-	return 0;
+	rc = ksz_config_flags(phydev);
+	return rc < 0 ? rc : 0;
 }
 
 static int ks8051_config_init(struct phy_device *phydev)
 {
-	int regval;
-
-	if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) {
-		regval = phy_read(phydev, MII_KSZPHY_CTRL);
-		regval |= KSZ8051_RMII_50MHZ_CLK;
-		phy_write(phydev, MII_KSZPHY_CTRL, regval);
-	}
+	int rc;
 
-	return 0;
+	rc = ksz_config_flags(phydev);
+	return rc < 0 ? rc : 0;
 }
 
 #define KSZ8873MLL_GLOBAL_CONTROL_4	0x06
@@ -176,7 +190,20 @@ static struct phy_driver ksphy_driver[] = {
 }, {
 	.phy_id		= PHY_ID_KSZ8021,
 	.phy_id_mask	= 0x00ffffff,
-	.name		= "Micrel KSZ8021",
+	.name		= "Micrel KSZ8021 or KSZ8031",
+	.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause |
+			   SUPPORTED_Asym_Pause),
+	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+	.config_init	= ksz8021_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.ack_interrupt	= kszphy_ack_interrupt,
+	.config_intr	= kszphy_config_intr,
+	.driver		= { .owner = THIS_MODULE,},
+}, {
+	.phy_id		= PHY_ID_KSZ8031,
+	.phy_id_mask	= 0x00ffffff,
+	.name		= "Micrel KSZ8031",
 	.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause |
 			   SUPPORTED_Asym_Pause),
 	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
@@ -225,9 +252,45 @@ static struct phy_driver ksphy_driver[] = {
 	.config_intr	= kszphy_config_intr,
 	.driver		= { .owner = THIS_MODULE,},
 }, {
+	.phy_id		= PHY_ID_KSZ8081,
+	.name		= "Micrel KSZ8081 or KSZ8091",
+	.phy_id_mask	= 0x00fffff0,
+	.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+	.config_init	= kszphy_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.ack_interrupt	= kszphy_ack_interrupt,
+	.config_intr	= kszphy_config_intr,
+	.driver		= { .owner = THIS_MODULE,},
+}, {
+	.phy_id		= PHY_ID_KSZ8061,
+	.name		= "Micrel KSZ8061",
+	.phy_id_mask	= 0x00fffff0,
+	.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+	.config_init	= kszphy_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.ack_interrupt	= kszphy_ack_interrupt,
+	.config_intr	= kszphy_config_intr,
+	.driver		= { .owner = THIS_MODULE,},
+}, {
 	.phy_id		= PHY_ID_KSZ9021,
 	.phy_id_mask	= 0x000ffffe,
 	.name		= "Micrel KSZ9021 Gigabit PHY",
+	.features	= (PHY_GBIT_FEATURES | SUPPORTED_Pause),
+	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+	.config_init	= kszphy_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.ack_interrupt	= kszphy_ack_interrupt,
+	.config_intr	= ksz9021_config_intr,
+	.driver		= { .owner = THIS_MODULE, },
+}, {
+	.phy_id		= PHY_ID_KSZ9031,
+	.phy_id_mask	= 0x00fffff0,
+	.name		= "Micrel KSZ9031 Gigabit PHY",
 	.features	= (PHY_GBIT_FEATURES | SUPPORTED_Pause
 				| SUPPORTED_Asym_Pause),
 	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
@@ -247,6 +310,16 @@ static struct phy_driver ksphy_driver[] = {
 	.config_aneg	= ksz8873mll_config_aneg,
 	.read_status	= ksz8873mll_read_status,
 	.driver		= { .owner = THIS_MODULE, },
+}, {
+	.phy_id		= PHY_ID_KSZ886X,
+	.phy_id_mask	= 0x00fffff0,
+	.name		= "Micrel KSZ886X Switch",
+	.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+	.config_init	= kszphy_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.driver		= { .owner = THIS_MODULE, },
 } };
 
 static int __init ksphy_init(void)
@@ -270,12 +343,17 @@ MODULE_LICENSE("GPL");
 
 static struct mdio_device_id __maybe_unused micrel_tbl[] = {
 	{ PHY_ID_KSZ9021, 0x000ffffe },
+	{ PHY_ID_KSZ9031, 0x00fffff0 },
 	{ PHY_ID_KSZ8001, 0x00ffffff },
 	{ PHY_ID_KS8737, 0x00fffff0 },
 	{ PHY_ID_KSZ8021, 0x00ffffff },
+	{ PHY_ID_KSZ8031, 0x00ffffff },
 	{ PHY_ID_KSZ8041, 0x00fffff0 },
 	{ PHY_ID_KSZ8051, 0x00fffff0 },
+	{ PHY_ID_KSZ8061, 0x00fffff0 },
+	{ PHY_ID_KSZ8081, 0x00fffff0 },
 	{ PHY_ID_KSZ8873MLL, 0x00fffff0 },
+	{ PHY_ID_KSZ886X, 0x00fffff0 },
 	{ }
 };
 
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index ef9ea92..38f0b31 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -463,33 +463,6 @@ void phy_stop_machine(struct phy_device *phydev)
 }
 
 /**
- * phy_force_reduction - reduce PHY speed/duplex settings by one step
- * @phydev: target phy_device struct
- *
- * Description: Reduces the speed/duplex settings by one notch,
- *   in this order--
- *   1000/FULL, 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF.
- *   The function bottoms out at 10/HALF.
- */
-static void phy_force_reduction(struct phy_device *phydev)
-{
-	int idx;
-
-	idx = phy_find_setting(phydev->speed, phydev->duplex);
-	
-	idx++;
-
-	idx = phy_find_valid(idx, phydev->supported);
-
-	phydev->speed = settings[idx].speed;
-	phydev->duplex = settings[idx].duplex;
-
-	pr_info("Trying %d/%s\n",
-		phydev->speed, DUPLEX_FULL == phydev->duplex ? "FULL" : "HALF");
-}
-
-
-/**
  * phy_error - enter HALTED state for this PHY device
  * @phydev: target phy_device struct
  *
@@ -818,30 +791,11 @@ void phy_state_machine(struct work_struct *work)
 				phydev->adjust_link(phydev->attached_dev);
 
 			} else if (0 == phydev->link_timeout--) {
-				int idx;
-
 				needs_aneg = 1;
 				/* If we have the magic_aneg bit,
 				 * we try again */
 				if (phydev->drv->flags & PHY_HAS_MAGICANEG)
 					break;
-
-				/* The timer expired, and we still
-				 * don't have a setting, so we try
-				 * forcing it until we find one that
-				 * works, starting from the fastest speed,
-				 * and working our way down */
-				idx = phy_find_valid(0, phydev->supported);
-
-				phydev->speed = settings[idx].speed;
-				phydev->duplex = settings[idx].duplex;
-
-				phydev->autoneg = AUTONEG_DISABLE;
-
-				pr_info("Trying %d/%s\n",
-					phydev->speed,
-					DUPLEX_FULL == phydev->duplex ?
-					"FULL" : "HALF");
 			}
 			break;
 		case PHY_NOLINK:
@@ -866,10 +820,8 @@ void phy_state_machine(struct work_struct *work)
 				phydev->state = PHY_RUNNING;
 				netif_carrier_on(phydev->attached_dev);
 			} else {
-				if (0 == phydev->link_timeout--) {
-					phy_force_reduction(phydev);
+				if (0 == phydev->link_timeout--)
 					needs_aneg = 1;
-				}
 			}
 
 			phydev->adjust_link(phydev->attached_dev);
@@ -1092,7 +1044,7 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
 		adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv);
 		lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp);
 		idx = phy_find_setting(phydev->speed, phydev->duplex);
-		if ((lp & adv & settings[idx].setting))
+		if (!(lp & adv & settings[idx].setting))
 			goto eee_exit;
 
 		if (clk_stop_enable) {
@@ -1188,3 +1140,19 @@ int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
 	return 0;
 }
 EXPORT_SYMBOL(phy_ethtool_set_eee);
+
+int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
+{
+	if (phydev->drv->set_wol)
+		return phydev->drv->set_wol(phydev, wol);
+
+	return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL(phy_ethtool_set_wol);
+
+void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
+{
+	if (phydev->drv->get_wol)
+		phydev->drv->get_wol(phydev, wol);
+}
+EXPORT_SYMBOL(phy_ethtool_get_wol);
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 17abcf1..247a042 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -45,13 +45,13 @@ MODULE_LICENSE("GPL");
 
 void phy_device_free(struct phy_device *phydev)
 {
-	kfree(phydev);
+	put_device(&phydev->dev);
 }
 EXPORT_SYMBOL(phy_device_free);
 
 static void phy_device_release(struct device *dev)
 {
-	phy_device_free(to_phy_device(dev));
+	kfree(to_phy_device(dev));
 }
 
 static struct phy_driver genphy_driver;
@@ -200,6 +200,8 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
 	   there's no driver _already_ loaded. */
 	request_module(MDIO_MODULE_PREFIX MDIO_ID_FMT, MDIO_ID_ARGS(phy_id));
 
+	device_initialize(&dev->dev);
+
 	return dev;
 }
 EXPORT_SYMBOL(phy_device_create);
@@ -362,9 +364,9 @@ int phy_device_register(struct phy_device *phydev)
 	/* Run all of the fixups for this PHY */
 	phy_scan_fixups(phydev);
 
-	err = device_register(&phydev->dev);
+	err = device_add(&phydev->dev);
 	if (err) {
-		pr_err("phy %d failed to register\n", phydev->addr);
+		pr_err("PHY %d failed to add\n", phydev->addr);
 		goto out;
 	}
 
@@ -415,16 +417,15 @@ static void phy_prepare_link(struct phy_device *phydev,
  * @dev: the network device to connect
  * @phydev: the pointer to the phy device
  * @handler: callback function for state change notifications
- * @flags: PHY device's dev_flags
  * @interface: PHY device's interface
  */
 int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
-		       void (*handler)(struct net_device *), u32 flags,
+		       void (*handler)(struct net_device *),
 		       phy_interface_t interface)
 {
 	int rc;
 
-	rc = phy_attach_direct(dev, phydev, flags, interface);
+	rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface);
 	if (rc)
 		return rc;
 
@@ -442,7 +443,6 @@ EXPORT_SYMBOL(phy_connect_direct);
  * @dev: the network device to connect
  * @bus_id: the id string of the PHY device to connect
  * @handler: callback function for state change notifications
- * @flags: PHY device's dev_flags
  * @interface: PHY device's interface
  *
  * Description: Convenience function for connecting ethernet
@@ -454,7 +454,7 @@ EXPORT_SYMBOL(phy_connect_direct);
  *   the desired functionality.
  */
 struct phy_device * phy_connect(struct net_device *dev, const char *bus_id,
-		void (*handler)(struct net_device *), u32 flags,
+		void (*handler)(struct net_device *),
 		phy_interface_t interface)
 {
 	struct phy_device *phydev;
@@ -470,7 +470,7 @@ struct phy_device * phy_connect(struct net_device *dev, const char *bus_id,
 	}
 	phydev = to_phy_device(d);
 
-	rc = phy_connect_direct(dev, phydev, handler, flags, interface);
+	rc = phy_connect_direct(dev, phydev, handler, interface);
 	if (rc)
 		return ERR_PTR(rc);
 
@@ -574,14 +574,13 @@ EXPORT_SYMBOL(phy_attach_direct);
  * phy_attach - attach a network device to a particular PHY device
  * @dev: network device to attach
  * @bus_id: Bus ID of PHY device to attach
- * @flags: PHY device's dev_flags
  * @interface: PHY device's interface
  *
  * Description: Same as phy_attach_direct() except that a PHY bus_id
  *     string is passed instead of a pointer to a struct phy_device.
  */
 struct phy_device *phy_attach(struct net_device *dev,
-		const char *bus_id, u32 flags, phy_interface_t interface)
+		const char *bus_id, phy_interface_t interface)
 {
 	struct bus_type *bus = &mdio_bus_type;
 	struct phy_device *phydev;
@@ -597,7 +596,7 @@ struct phy_device *phy_attach(struct net_device *dev,
 	}
 	phydev = to_phy_device(d);
 
-	rc = phy_attach_direct(dev, phydev, flags, interface);
+	rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface);
 	if (rc)
 		return ERR_PTR(rc);
 
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 72f9347..8e7af83 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -23,6 +23,8 @@
 #define RTL821x_INER_INIT	0x6400
 #define RTL821x_INSR		0x13
 
+#define	RTL8211E_INER_LINK_STAT	0x10
+
 MODULE_DESCRIPTION("Realtek PHY driver");
 MODULE_AUTHOR("Johnson Leung");
 MODULE_LICENSE("GPL");
@@ -36,7 +38,7 @@ static int rtl821x_ack_interrupt(struct phy_device *phydev)
 	return (err < 0) ? err : 0;
 }
 
-static int rtl821x_config_intr(struct phy_device *phydev)
+static int rtl8211b_config_intr(struct phy_device *phydev)
 {
 	int err;
 
@@ -49,28 +51,63 @@ static int rtl821x_config_intr(struct phy_device *phydev)
 	return err;
 }
 
+static int rtl8211e_config_intr(struct phy_device *phydev)
+{
+	int err;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+		err = phy_write(phydev, RTL821x_INER,
+				RTL8211E_INER_LINK_STAT);
+	else
+		err = phy_write(phydev, RTL821x_INER, 0);
+
+	return err;
+}
+
 /* RTL8211B */
-static struct phy_driver rtl821x_driver = {
+static struct phy_driver rtl8211b_driver = {
 	.phy_id		= 0x001cc912,
-	.name		= "RTL821x Gigabit Ethernet",
+	.name		= "RTL8211B Gigabit Ethernet",
 	.phy_id_mask	= 0x001fffff,
 	.features	= PHY_GBIT_FEATURES,
 	.flags		= PHY_HAS_INTERRUPT,
 	.config_aneg	= &genphy_config_aneg,
 	.read_status	= &genphy_read_status,
 	.ack_interrupt	= &rtl821x_ack_interrupt,
-	.config_intr	= &rtl821x_config_intr,
+	.config_intr	= &rtl8211b_config_intr,
+	.driver		= { .owner = THIS_MODULE,},
+};
+
+/* RTL8211E */
+static struct phy_driver rtl8211e_driver = {
+	.phy_id		= 0x001cc915,
+	.name		= "RTL8211E Gigabit Ethernet",
+	.phy_id_mask	= 0x001fffff,
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_aneg	= &genphy_config_aneg,
+	.read_status	= &genphy_read_status,
+	.ack_interrupt	= &rtl821x_ack_interrupt,
+	.config_intr	= &rtl8211e_config_intr,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 	.driver		= { .owner = THIS_MODULE,},
 };
 
 static int __init realtek_init(void)
 {
-	return phy_driver_register(&rtl821x_driver);
+	int ret;
+
+	ret = phy_driver_register(&rtl8211b_driver);
+	if (ret < 0)
+		return -ENODEV;
+	return phy_driver_register(&rtl8211e_driver);
 }
 
 static void __exit realtek_exit(void)
 {
-	phy_driver_unregister(&rtl821x_driver);
+	phy_driver_unregister(&rtl8211b_driver);
+	phy_driver_unregister(&rtl8211e_driver);
 }
 
 module_init(realtek_init);
@@ -78,6 +115,7 @@ module_exit(realtek_exit);
 
 static struct mdio_device_id __maybe_unused realtek_tbl[] = {
 	{ 0x001cc912, 0x001fffff },
+	{ 0x001cc915, 0x001fffff },
 	{ }
 };
 
diff --git a/drivers/net/phy/spi_ks8995.c b/drivers/net/phy/spi_ks8995.c
index 41eb8ff..d11c93e 100644
--- a/drivers/net/phy/spi_ks8995.c
+++ b/drivers/net/phy/spi_ks8995.c
@@ -275,15 +275,13 @@ static int ks8995_probe(struct spi_device *spi)
 	pdata = spi->dev.platform_data;
 
 	ks = kzalloc(sizeof(*ks), GFP_KERNEL);
-	if (!ks) {
-		dev_err(&spi->dev, "no memory for private data\n");
+	if (!ks)
 		return -ENOMEM;
-	}
 
 	mutex_init(&ks->lock);
 	ks->pdata = pdata;
 	ks->spi = spi_dev_get(spi);
-	dev_set_drvdata(&spi->dev, ks);
+	spi_set_drvdata(spi, ks);
 
 	spi->mode = SPI_MODE_0;
 	spi->bits_per_word = 8;
@@ -327,7 +325,7 @@ static int ks8995_probe(struct spi_device *spi)
 	return 0;
 
 err_drvdata:
-	dev_set_drvdata(&spi->dev, NULL);
+	spi_set_drvdata(spi, NULL);
 	kfree(ks);
 	return err;
 }
@@ -336,10 +334,10 @@ static int ks8995_remove(struct spi_device *spi)
 {
 	struct ks8995_data      *ks8995;
 
-	ks8995 = dev_get_drvdata(&spi->dev);
+	ks8995 = spi_get_drvdata(spi);
 	sysfs_remove_bin_file(&spi->dev.kobj, &ks8995_registers_attr);
 
-	dev_set_drvdata(&spi->dev, NULL);
+	spi_set_drvdata(spi, NULL);
 	kfree(ks8995);
 
 	return 0;
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index 428bcd2..b1f2549 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -68,7 +68,7 @@ MODULE_DESCRIPTION("Vitesse PHY driver");
 MODULE_AUTHOR("Kriston Carson");
 MODULE_LICENSE("GPL");
 
-int vsc824x_add_skew(struct phy_device *phydev)
+static int vsc824x_add_skew(struct phy_device *phydev)
 {
 	int err;
 	int extcon;
@@ -88,7 +88,6 @@ int vsc824x_add_skew(struct phy_device *phydev)
 
 	return err;
 }
-EXPORT_SYMBOL(vsc824x_add_skew);
 
 static int vsc824x_config_init(struct phy_device *phydev)
 {