qlge: Add basic firmware dump.

Adding the infrstructure and basic data for the firmware
core dump.
The firmware coredump is turned OFF by default.  There will be no
memory allocations for data dumps to the log.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 73 insertions, 0 deletions

diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index e2b2286..242b1ea 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -1,5 +1,35 @@
 #include "qlge.h"
 
+int ql_unpause_mpi_risc(struct ql_adapter *qdev)
+{
+	u32 tmp;
+
+	/* Un-pause the RISC */
+	tmp = ql_read32(qdev, CSR);
+	if (!(tmp & CSR_RP))
+		return -EIO;
+
+	ql_write32(qdev, CSR, CSR_CMD_CLR_PAUSE);
+	return 0;
+}
+
+int ql_pause_mpi_risc(struct ql_adapter *qdev)
+{
+	u32 tmp;
+	int count = UDELAY_COUNT;
+
+	/* Pause the RISC */
+	ql_write32(qdev, CSR, CSR_CMD_SET_PAUSE);
+	do {
+		tmp = ql_read32(qdev, CSR);
+		if (tmp & CSR_RP)
+			break;
+		mdelay(UDELAY_DELAY);
+		count--;
+	} while (count);
+	return (count == 0) ? -ETIMEDOUT : 0;
+}
+
 int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data)
 {
 	int status;
@@ -45,6 +75,35 @@ int ql_soft_reset_mpi_risc(struct ql_adapter *qdev)
 	return status;
 }
 
+/* Determine if we are in charge of the firwmare. If
+ * we are the lower of the 2 NIC pcie functions, or if
+ * we are the higher function and the lower function
+ * is not enabled.
+ */
+int ql_own_firmware(struct ql_adapter *qdev)
+{
+	u32 temp;
+
+	/* If we are the lower of the 2 NIC functions
+	 * on the chip the we are responsible for
+	 * core dump and firmware reset after an error.
+	 */
+	if (qdev->func < qdev->alt_func)
+		return 1;
+
+	/* If we are the higher of the 2 NIC functions
+	 * on the chip and the lower function is not
+	 * enabled, then we are responsible for
+	 * core dump and firmware reset after an error.
+	 */
+	temp =  ql_read32(qdev, STS);
+	if (!(temp & (1 << (8 + qdev->alt_func))))
+		return 1;
+
+	return 0;
+
+}
+
 static int ql_get_mb_sts(struct ql_adapter *qdev, struct mbox_params *mbcp)
 {
 	int i, status;
@@ -1143,5 +1202,19 @@ void ql_mpi_reset_work(struct work_struct *work)
 	cancel_delayed_work_sync(&qdev->mpi_work);
 	cancel_delayed_work_sync(&qdev->mpi_port_cfg_work);
 	cancel_delayed_work_sync(&qdev->mpi_idc_work);
+	/* If we're not the dominant NIC function,
+	 * then there is nothing to do.
+	 */
+	if (!ql_own_firmware(qdev)) {
+		QPRINTK(qdev, DRV, ERR, "Don't own firmware!\n");
+		return;
+	}
+
+	if (!ql_core_dump(qdev, qdev->mpi_coredump)) {
+		QPRINTK(qdev, DRV, ERR, "Core is dumped!\n");
+		qdev->core_is_dumped = 1;
+		queue_delayed_work(qdev->workqueue,
+			&qdev->mpi_core_to_log, 5 * HZ);
+	}
 	ql_soft_reset_mpi_risc(qdev);
 }