diff options
author | Ben Hutchings <bhutchings@solarflare.com> | 2008-11-04 20:34:56 (GMT) |
---|---|---|
committer | Jeff Garzik <jgarzik@redhat.com> | 2008-11-06 05:50:09 (GMT) |
commit | 3e133c44d24a094118caee182200462d46c55b56 (patch) | |
tree | cabc1821bef090abedd1891c3d16137dea8f2ef3 /drivers/net/sfc | |
parent | f41507245ef8b079685aba8da5b5b2b5e87e70bc (diff) | |
download | linux-fsl-qoriq-3e133c44d24a094118caee182200462d46c55b56.tar.xz |
sfc: Use lm87 and lm90 drivers for board temperature/power monitoring
Add board monitoring to periodic work whenever link is down.
For SFE4001, report when a fault has caused the PHY to turn off.
For SFE4002, switch XFP PHY into low-power state in case of a fault.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/net/sfc')
-rw-r--r-- | drivers/net/sfc/boards.c | 136 | ||||
-rw-r--r-- | drivers/net/sfc/mdio_10g.c | 35 | ||||
-rw-r--r-- | drivers/net/sfc/mdio_10g.h | 7 | ||||
-rw-r--r-- | drivers/net/sfc/net_driver.h | 6 | ||||
-rw-r--r-- | drivers/net/sfc/sfe4001.c | 116 | ||||
-rw-r--r-- | drivers/net/sfc/tenxpress.c | 18 | ||||
-rw-r--r-- | drivers/net/sfc/workarounds.h | 2 | ||||
-rw-r--r-- | drivers/net/sfc/xfp_phy.c | 9 |
8 files changed, 265 insertions, 64 deletions
diff --git a/drivers/net/sfc/boards.c b/drivers/net/sfc/boards.c index 99e6023..edf0262 100644 --- a/drivers/net/sfc/boards.c +++ b/drivers/net/sfc/boards.c @@ -11,6 +11,7 @@ #include "phy.h" #include "boards.h" #include "efx.h" +#include "workarounds.h" /* Macros for unpacking the board revision */ /* The revision info is in host byte order. */ @@ -52,9 +53,128 @@ static void board_blink(struct efx_nic *efx, bool blink) } /***************************************************************************** + * Support for LM87 sensor chip used on several boards + */ +#define LM87_REG_ALARMS1 0x41 +#define LM87_REG_ALARMS2 0x42 +#define LM87_IN_LIMITS(nr, _min, _max) \ + 0x2B + (nr) * 2, _max, 0x2C + (nr) * 2, _min +#define LM87_AIN_LIMITS(nr, _min, _max) \ + 0x3B + (nr), _max, 0x1A + (nr), _min +#define LM87_TEMP_INT_LIMITS(_min, _max) \ + 0x39, _max, 0x3A, _min +#define LM87_TEMP_EXT1_LIMITS(_min, _max) \ + 0x37, _max, 0x38, _min + +#define LM87_ALARM_TEMP_INT 0x10 +#define LM87_ALARM_TEMP_EXT1 0x20 + +#if defined(CONFIG_SENSORS_LM87) || defined(CONFIG_SENSORS_LM87_MODULE) + +static int efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info, + const u8 *reg_values) +{ + struct i2c_client *client = i2c_new_device(&efx->i2c_adap, info); + int rc; + + if (!client) + return -EIO; + + while (*reg_values) { + u8 reg = *reg_values++; + u8 value = *reg_values++; + rc = i2c_smbus_write_byte_data(client, reg, value); + if (rc) + goto err; + } + + efx->board_info.hwmon_client = client; + return 0; + +err: + i2c_unregister_device(client); + return rc; +} + +static void efx_fini_lm87(struct efx_nic *efx) +{ + i2c_unregister_device(efx->board_info.hwmon_client); +} + +static int efx_check_lm87(struct efx_nic *efx, unsigned mask) +{ + struct i2c_client *client = efx->board_info.hwmon_client; + s32 alarms1, alarms2; + + /* If link is up then do not monitor temperature */ + if (EFX_WORKAROUND_7884(efx) && efx->link_up) + return 0; + + alarms1 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS1); + alarms2 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS2); + if (alarms1 < 0) + return alarms1; + if (alarms2 < 0) + return alarms2; + alarms1 &= mask; + alarms2 &= mask >> 8; + if (alarms1 || alarms2) { + EFX_ERR(efx, + "LM87 detected a hardware failure (status %02x:%02x)" + "%s%s\n", + alarms1, alarms2, + (alarms1 & LM87_ALARM_TEMP_INT) ? " INTERNAL" : "", + (alarms1 & LM87_ALARM_TEMP_EXT1) ? " EXTERNAL" : ""); + return -ERANGE; + } + + return 0; +} + +#else /* !CONFIG_SENSORS_LM87 */ + +static inline int +efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info, + const u8 *reg_values) +{ + return 0; +} +static inline void efx_fini_lm87(struct efx_nic *efx) +{ +} +static inline int efx_check_lm87(struct efx_nic *efx, unsigned mask) +{ + return 0; +} + +#endif /* CONFIG_SENSORS_LM87 */ + +/***************************************************************************** * Support for the SFE4002 * */ +static u8 sfe4002_lm87_channel = 0x03; /* use AIN not FAN inputs */ + +static const u8 sfe4002_lm87_regs[] = { + LM87_IN_LIMITS(0, 0x83, 0x91), /* 2.5V: 1.8V +/- 5% */ + LM87_IN_LIMITS(1, 0x51, 0x5a), /* Vccp1: 1.2V +/- 5% */ + LM87_IN_LIMITS(2, 0xb6, 0xca), /* 3.3V: 3.3V +/- 5% */ + LM87_IN_LIMITS(3, 0xb0, 0xc9), /* 5V: 4.6-5.2V */ + LM87_IN_LIMITS(4, 0xb0, 0xe0), /* 12V: 11-14V */ + LM87_IN_LIMITS(5, 0x44, 0x4b), /* Vccp2: 1.0V +/- 5% */ + LM87_AIN_LIMITS(0, 0xa0, 0xb2), /* AIN1: 1.66V +/- 5% */ + LM87_AIN_LIMITS(1, 0x91, 0xa1), /* AIN2: 1.5V +/- 5% */ + LM87_TEMP_INT_LIMITS(10, 60), /* board */ + LM87_TEMP_EXT1_LIMITS(10, 70), /* Falcon */ + 0 +}; + +static struct i2c_board_info sfe4002_hwmon_info = { + I2C_BOARD_INFO("lm87", 0x2e), + .platform_data = &sfe4002_lm87_channel, + .irq = -1, +}; + /****************************************************************************/ /* LED allocations. Note that on rev A0 boards the schematic and the reality * differ: red and green are swapped. Below is the fixed (A1) layout (there @@ -84,11 +204,27 @@ static void sfe4002_fault_led(struct efx_nic *efx, bool state) QUAKE_LED_OFF); } +static int sfe4002_check_hw(struct efx_nic *efx) +{ + /* A0 board rev. 4002s report a temperature fault the whole time + * (bad sensor) so we mask it out. */ + unsigned alarm_mask = + (efx->board_info.major == 0 && efx->board_info.minor == 0) ? + ~LM87_ALARM_TEMP_EXT1 : ~0; + + return efx_check_lm87(efx, alarm_mask); +} + static int sfe4002_init(struct efx_nic *efx) { + int rc = efx_init_lm87(efx, &sfe4002_hwmon_info, sfe4002_lm87_regs); + if (rc) + return rc; + efx->board_info.monitor = sfe4002_check_hw; efx->board_info.init_leds = sfe4002_init_leds; efx->board_info.set_fault_led = sfe4002_fault_led; efx->board_info.blink = board_blink; + efx->board_info.fini = efx_fini_lm87; return 0; } diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c index 003e48d..19e2521 100644 --- a/drivers/net/sfc/mdio_10g.c +++ b/drivers/net/sfc/mdio_10g.c @@ -260,6 +260,41 @@ void mdio_clause45_phy_reconfigure(struct efx_nic *efx) MDIO_MMDREG_CTRL1, ctrl2); } +static void mdio_clause45_set_mmd_lpower(struct efx_nic *efx, + int lpower, int mmd) +{ + int phy = efx->mii.phy_id; + int stat = mdio_clause45_read(efx, phy, mmd, MDIO_MMDREG_STAT1); + int ctrl1, ctrl2; + + EFX_TRACE(efx, "Setting low power mode for MMD %d to %d\n", + mmd, lpower); + + if (stat & (1 << MDIO_MMDREG_STAT1_LPABLE_LBN)) { + ctrl1 = ctrl2 = mdio_clause45_read(efx, phy, + mmd, MDIO_MMDREG_CTRL1); + if (lpower) + ctrl2 |= (1 << MDIO_MMDREG_CTRL1_LPOWER_LBN); + else + ctrl2 &= ~(1 << MDIO_MMDREG_CTRL1_LPOWER_LBN); + if (ctrl1 != ctrl2) + mdio_clause45_write(efx, phy, mmd, + MDIO_MMDREG_CTRL1, ctrl2); + } +} + +void mdio_clause45_set_mmds_lpower(struct efx_nic *efx, + int low_power, unsigned int mmd_mask) +{ + int mmd = 0; + while (mmd_mask) { + if (mmd_mask & 1) + mdio_clause45_set_mmd_lpower(efx, low_power, mmd); + mmd_mask = (mmd_mask >> 1); + mmd++; + } +} + /** * mdio_clause45_get_settings - Read (some of) the PHY settings over MDIO. * @efx: Efx NIC diff --git a/drivers/net/sfc/mdio_10g.h b/drivers/net/sfc/mdio_10g.h index 19c42ea..db9f358 100644 --- a/drivers/net/sfc/mdio_10g.h +++ b/drivers/net/sfc/mdio_10g.h @@ -54,6 +54,9 @@ /* Loopback bit for WIS, PCS, PHYSX and DTEXS */ #define MDIO_MMDREG_CTRL1_LBACK_LBN (14) #define MDIO_MMDREG_CTRL1_LBACK_WIDTH (1) +/* Low power */ +#define MDIO_MMDREG_CTRL1_LPOWER_LBN (11) +#define MDIO_MMDREG_CTRL1_LPOWER_WIDTH (1) /* Bits in MMDREG_STAT1 */ #define MDIO_MMDREG_STAT1_FAULT_LBN (7) @@ -240,6 +243,10 @@ extern void mdio_clause45_transmit_disable(struct efx_nic *efx); /* Generic part of reconfigure: set/clear loopback bits */ extern void mdio_clause45_phy_reconfigure(struct efx_nic *efx); +/* Set the power state of the specified MMDs */ +extern void mdio_clause45_set_mmds_lpower(struct efx_nic *efx, + int low_power, unsigned int mmd_mask); + /* Read (some of) the PHY settings over MDIO */ extern void mdio_clause45_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd); diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index c953eb1..e596c9a 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -414,6 +414,7 @@ struct efx_blinker { * @init_leds: Sets up board LEDs * @set_fault_led: Turns the fault LED on or off * @blink: Starts/stops blinking + * @monitor: Board-specific health check function * @fini: Cleanup function * @blinker: used to blink LEDs in software * @hwmon_client: I2C client for hardware monitor @@ -428,6 +429,7 @@ struct efx_board { * have a separate init callback that happens later than * board init. */ int (*init_leds)(struct efx_nic *efx); + int (*monitor) (struct efx_nic *nic); void (*set_fault_led) (struct efx_nic *efx, bool state); void (*blink) (struct efx_nic *efx, bool start); void (*fini) (struct efx_nic *nic); @@ -525,11 +527,15 @@ struct efx_phy_operations { * @enum efx_phy_mode - PHY operating mode flags * @PHY_MODE_NORMAL: on and should pass traffic * @PHY_MODE_TX_DISABLED: on with TX disabled + * @PHY_MODE_LOW_POWER: set to low power through MDIO + * @PHY_MODE_OFF: switched off through external control * @PHY_MODE_SPECIAL: on but will not pass traffic */ enum efx_phy_mode { PHY_MODE_NORMAL = 0, PHY_MODE_TX_DISABLED = 1, + PHY_MODE_LOW_POWER = 2, + PHY_MODE_OFF = 4, PHY_MODE_SPECIAL = 8, }; diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c index fe4e3fd..aa576c5 100644 --- a/drivers/net/sfc/sfe4001.c +++ b/drivers/net/sfc/sfe4001.c @@ -21,6 +21,7 @@ #include "falcon_hwdefs.h" #include "falcon_io.h" #include "mac.h" +#include "workarounds.h" /************************************************************************** * @@ -65,48 +66,9 @@ #define P1_SPARE_LBN 4 #define P1_SPARE_WIDTH 4 - -/************************************************************************** - * - * Temperature Sensor - * - **************************************************************************/ -#define MAX6647 0x4e - -#define RLTS 0x00 -#define RLTE 0x01 -#define RSL 0x02 -#define RCL 0x03 -#define RCRA 0x04 -#define RLHN 0x05 -#define RLLI 0x06 -#define RRHI 0x07 -#define RRLS 0x08 -#define WCRW 0x0a -#define WLHO 0x0b -#define WRHA 0x0c -#define WRLN 0x0e -#define OSHT 0x0f -#define REET 0x10 -#define RIET 0x11 -#define RWOE 0x19 -#define RWOI 0x20 -#define HYS 0x21 -#define QUEUE 0x22 -#define MFID 0xfe -#define REVID 0xff - -/* Status bits */ -#define MAX6647_BUSY (1 << 7) /* ADC is converting */ -#define MAX6647_LHIGH (1 << 6) /* Local high temp. alarm */ -#define MAX6647_LLOW (1 << 5) /* Local low temp. alarm */ -#define MAX6647_RHIGH (1 << 4) /* Remote high temp. alarm */ -#define MAX6647_RLOW (1 << 3) /* Remote low temp. alarm */ -#define MAX6647_FAULT (1 << 2) /* DXN/DXP short/open circuit */ -#define MAX6647_EOT (1 << 1) /* Remote junction overtemp. */ -#define MAX6647_IOT (1 << 0) /* Local junction overtemp. */ - -static const u8 xgphy_max_temperature = 90; +/* Temperature Sensor */ +#define MAX664X_REG_RSL 0x02 +#define MAX664X_REG_WLHO 0x0B static void sfe4001_poweroff(struct efx_nic *efx) { @@ -119,7 +81,7 @@ static void sfe4001_poweroff(struct efx_nic *efx) i2c_smbus_write_byte_data(ioexp_client, P0_CONFIG, 0xff); /* Clear any over-temperature alert */ - i2c_smbus_read_byte_data(hwmon_client, RSL); + i2c_smbus_read_byte_data(hwmon_client, MAX664X_REG_RSL); } static int sfe4001_poweron(struct efx_nic *efx) @@ -131,7 +93,7 @@ static int sfe4001_poweron(struct efx_nic *efx) u8 out; /* Clear any previous over-temperature alert */ - rc = i2c_smbus_read_byte_data(hwmon_client, RSL); + rc = i2c_smbus_read_byte_data(hwmon_client, MAX664X_REG_RSL); if (rc < 0) return rc; @@ -209,6 +171,34 @@ fail_on: return rc; } +static int sfe4001_check_hw(struct efx_nic *efx) +{ + s32 status; + + /* If XAUI link is up then do not monitor */ + if (EFX_WORKAROUND_7884(efx) && falcon_xaui_link_ok(efx)) + return 0; + + /* Check the powered status of the PHY. Lack of power implies that + * the MAX6647 has shut down power to it, probably due to a temp. + * alarm. Reading the power status rather than the MAX6647 status + * directly because the later is read-to-clear and would thus + * start to power up the PHY again when polled, causing us to blip + * the power undesirably. + * We know we can read from the IO expander because we did + * it during power-on. Assume failure now is bad news. */ + status = i2c_smbus_read_byte_data(efx->board_info.ioexp_client, P1_IN); + if (status >= 0 && + (status & ((1 << P1_AFE_PWD_LBN) | (1 << P1_DSP_PWD25_LBN))) != 0) + return 0; + + /* Use board power control, not PHY power control */ + sfe4001_poweroff(efx); + efx->phy_mode = PHY_MODE_OFF; + + return (status < 0) ? -EIO : -ERANGE; +} + /* On SFE4001 rev A2 and later, we can control the FLASH_CFG_1 pin * using the 3V3X output of the IO-expander. Allow the user to set * this when the device is stopped, and keep it stopped then. @@ -261,35 +251,34 @@ static void sfe4001_fini(struct efx_nic *efx) i2c_unregister_device(efx->board_info.hwmon_client); } +static struct i2c_board_info sfe4001_hwmon_info = { + I2C_BOARD_INFO("max6647", 0x4e), + .irq = -1, +}; + /* This board uses an I2C expander to provider power to the PHY, which needs to * be turned on before the PHY can be used. * Context: Process context, rtnl lock held */ int sfe4001_init(struct efx_nic *efx) { - struct i2c_client *hwmon_client; int rc; - hwmon_client = i2c_new_dummy(&efx->i2c_adap, MAX6647); - if (!hwmon_client) +#if defined(CONFIG_SENSORS_LM90) || defined(CONFIG_SENSORS_LM90_MODULE) + efx->board_info.hwmon_client = + i2c_new_device(&efx->i2c_adap, &sfe4001_hwmon_info); +#else + efx->board_info.hwmon_client = + i2c_new_dummy(&efx->i2c_adap, sfe4001_hwmon_info.addr); +#endif + if (!efx->board_info.hwmon_client) return -EIO; - efx->board_info.hwmon_client = hwmon_client; - /* Set DSP over-temperature alert threshold */ - EFX_INFO(efx, "DSP cut-out at %dC\n", xgphy_max_temperature); - rc = i2c_smbus_write_byte_data(hwmon_client, WLHO, - xgphy_max_temperature); + /* Raise board/PHY high limit from 85 to 90 degrees Celsius */ + rc = i2c_smbus_write_byte_data(efx->board_info.hwmon_client, + MAX664X_REG_WLHO, 90); if (rc) - goto fail_ioexp; - - /* Read it back and verify */ - rc = i2c_smbus_read_byte_data(hwmon_client, RLHN); - if (rc < 0) - goto fail_ioexp; - if (rc != xgphy_max_temperature) { - rc = -EFAULT; - goto fail_ioexp; - } + goto fail_hwmon; efx->board_info.ioexp_client = i2c_new_dummy(&efx->i2c_adap, PCA9539); if (!efx->board_info.ioexp_client) { @@ -301,6 +290,7 @@ int sfe4001_init(struct efx_nic *efx) * blink code. */ efx->board_info.blink = tenxpress_phy_blink; + efx->board_info.monitor = sfe4001_check_hw; efx->board_info.fini = sfe4001_fini; rc = sfe4001_poweron(efx); @@ -319,6 +309,6 @@ fail_on: fail_ioexp: i2c_unregister_device(efx->board_info.ioexp_client); fail_hwmon: - i2c_unregister_device(hwmon_client); + i2c_unregister_device(efx->board_info.hwmon_client); return rc; } diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c index d507c93..8d41c29 100644 --- a/drivers/net/sfc/tenxpress.c +++ b/drivers/net/sfc/tenxpress.c @@ -376,6 +376,7 @@ static int tenxpress_phy_check_hw(struct efx_nic *efx) { struct tenxpress_phy_data *phy_data = efx->phy_data; bool link_ok; + int rc = 0; link_ok = tenxpress_link_ok(efx, true); @@ -391,7 +392,22 @@ static int tenxpress_phy_check_hw(struct efx_nic *efx) atomic_set(&phy_data->bad_crc_count, 0); } - return 0; + rc = efx->board_info.monitor(efx); + if (rc) { + EFX_ERR(efx, "Board sensor %s; shutting down PHY\n", + (rc == -ERANGE) ? "reported fault" : "failed"); + if (efx->phy_mode & PHY_MODE_OFF) { + /* Assume that board has shut PHY off */ + phy_data->phy_mode = PHY_MODE_OFF; + } else { + efx->phy_mode |= PHY_MODE_LOW_POWER; + mdio_clause45_set_mmds_lpower(efx, true, + efx->phy_op->mmds); + phy_data->phy_mode |= PHY_MODE_LOW_POWER; + } + } + + return rc; } static void tenxpress_phy_fini(struct efx_nic *efx) diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h index fa7b49d..ec50b90 100644 --- a/drivers/net/sfc/workarounds.h +++ b/drivers/net/sfc/workarounds.h @@ -22,6 +22,8 @@ #define EFX_WORKAROUND_5147 EFX_WORKAROUND_ALWAYS /* RX PCIe double split performance issue */ #define EFX_WORKAROUND_7575 EFX_WORKAROUND_ALWAYS +/* Bit-bashed I2C reads cause performance drop */ +#define EFX_WORKAROUND_7884 EFX_WORKAROUND_ALWAYS /* TX pkt parser problem with <= 16 byte TXes */ #define EFX_WORKAROUND_9141 EFX_WORKAROUND_ALWAYS /* Low rate CRC errors require XAUI reset */ diff --git a/drivers/net/sfc/xfp_phy.c b/drivers/net/sfc/xfp_phy.c index 276151d..91f0246 100644 --- a/drivers/net/sfc/xfp_phy.c +++ b/drivers/net/sfc/xfp_phy.c @@ -128,6 +128,15 @@ static int xfp_phy_check_hw(struct efx_nic *efx) if (link_up != efx->link_up) falcon_xmac_sim_phy_event(efx); + rc = efx->board_info.monitor(efx); + if (rc) { + struct xfp_phy_data *phy_data = efx->phy_data; + EFX_ERR(efx, "XFP sensor alert; putting PHY into low power\n"); + efx->phy_mode |= PHY_MODE_LOW_POWER; + mdio_clause45_set_mmds_lpower(efx, 1, XFP_REQUIRED_DEVS); + phy_data->phy_mode |= PHY_MODE_LOW_POWER; + } + return rc; } |