diff options
author | Stephen Hemminger <shemminger@osdl.org> | 2005-06-27 18:33:10 (GMT) |
---|---|---|
committer | Jeff Garzik <jgarzik@pobox.com> | 2005-06-27 22:05:06 (GMT) |
commit | 89bf5f231f776443a9d65da0f774aa3632534749 (patch) | |
tree | d89ba0f943d24d2b45540562accca728d55e8c03 /drivers/net/skge.c | |
parent | c506a5090272752932be6ac0c29ffcbca38f2404 (diff) | |
download | linux-fsl-qoriq-89bf5f231f776443a9d65da0f774aa3632534749.tar.xz |
[PATCH] skge: remove XM phy (untested code)
Remove support for the non-Broadcom genesis based boards. The code
is untested, and probably won't work as is. The newer boards are all
Yukon based, and only old Genesis board I can find uses Broadcom.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Diffstat (limited to 'drivers/net/skge.c')
-rw-r--r-- | drivers/net/skge.c | 355 |
1 files changed, 138 insertions, 217 deletions
diff --git a/drivers/net/skge.c b/drivers/net/skge.c index c29e187..68de7f7 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -621,16 +621,8 @@ static void skge_led_on(struct skge_hw *hw, int port) skge_write32(hw, SK_REG(port, RX_LED_VAL), 100); skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START); - switch (hw->phy_type) { - case SK_PHY_BCOM: - xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, - PHY_B_PEC_LED_ON); - break; - default: - skge_write8(hw, SK_REG(port, TX_LED_TST), LED_T_ON); - skge_write32(hw, SK_REG(port, TX_LED_VAL), 100); - skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_START); - } + /* For Broadcom Phy only */ + xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_ON); } else { gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0); gm_phy_write(hw, port, PHY_MARV_LED_OVER, @@ -651,15 +643,8 @@ static void skge_led_off(struct skge_hw *hw, int port) skge_write32(hw, SK_REG(port, RX_LED_VAL), 0); skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_T_OFF); - switch (hw->phy_type) { - case SK_PHY_BCOM: - xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, - PHY_B_PEC_LED_OFF); - break; - default: - skge_write32(hw, SK_REG(port, TX_LED_VAL), 0); - skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_T_OFF); - } + /* Broadcom only */ + xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_OFF); } else { gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0); gm_phy_write(hw, port, PHY_MARV_LED_OVER, @@ -887,21 +872,21 @@ static u16 xm_phy_read(struct skge_hw *hw, int port, u16 reg) xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr); v = xm_read16(hw, port, XM_PHY_DATA); - if (hw->phy_type != SK_PHY_XMAC) { - for (i = 0; i < PHY_RETRIES; i++) { - udelay(1); - if (xm_read16(hw, port, XM_MMU_CMD) - & XM_MMU_PHY_RDY) - goto ready; - } - printk(KERN_WARNING PFX "%s: phy read timed out\n", - hw->dev[port]->name); - return 0; - ready: - v = xm_read16(hw, port, XM_PHY_DATA); + /* Need to wait for external PHY */ + for (i = 0; i < PHY_RETRIES; i++) { + udelay(1); + if (xm_read16(hw, port, XM_MMU_CMD) + & XM_MMU_PHY_RDY) + goto ready; } + printk(KERN_WARNING PFX "%s: phy read timed out\n", + hw->dev[port]->name); + return 0; + ready: + v = xm_read16(hw, port, XM_PHY_DATA); + return v; } @@ -913,7 +898,7 @@ static void xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val) for (i = 0; i < PHY_RETRIES; i++) { if (!(xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY)) goto ready; - cpu_relax(); + udelay(1); } printk(KERN_WARNING PFX "%s: phy write failed to come ready\n", hw->dev[port]->name); @@ -970,9 +955,8 @@ static void genesis_reset(struct skge_hw *hw, int port) xm_write16(hw, port, XM_TX_CMD, 0); /* reset TX CMD Reg */ xm_write16(hw, port, XM_RX_CMD, 0); /* reset RX CMD Reg */ - /* disable all PHY IRQs */ - if (hw->phy_type == SK_PHY_BCOM) - xm_write16(hw, port, PHY_BCOM_INT_MASK, 0xffff); + /* disable Broadcom PHY IRQ */ + xm_write16(hw, port, PHY_BCOM_INT_MASK, 0xffff); xm_outhash(hw, port, XM_HSM, (u8 *) &zero); for (i = 0; i < 15; i++) @@ -1020,54 +1004,55 @@ static void genesis_mac_init(struct skge_hw *hw, int port) * GMII mode. */ spin_lock_bh(&hw->phy_lock); - if (hw->phy_type != SK_PHY_XMAC) { - /* Take PHY out of reset. */ - r = skge_read32(hw, B2_GP_IO); - if (port == 0) - r |= GP_DIR_0|GP_IO_0; - else - r |= GP_DIR_2|GP_IO_2; - - skge_write32(hw, B2_GP_IO, r); - skge_read32(hw, B2_GP_IO); - - /* Enable GMII mode on the XMAC. */ - xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD); - - id1 = xm_phy_read(hw, port, PHY_XMAC_ID1); - - /* Optimize MDIO transfer by suppressing preamble. */ - xm_write16(hw, port, XM_MMU_CMD, - xm_read16(hw, port, XM_MMU_CMD) - | XM_MMU_NO_PRE); - - if (id1 == PHY_BCOM_ID1_C0) { - /* - * Workaround BCOM Errata for the C0 type. - * Write magic patterns to reserved registers. - */ - for (i = 0; i < ARRAY_SIZE(C0hack); i++) - xm_phy_write(hw, port, - C0hack[i].reg, C0hack[i].val); - - } else if (id1 == PHY_BCOM_ID1_A1) { - /* - * Workaround BCOM Errata for the A1 type. - * Write magic patterns to reserved registers. - */ - for (i = 0; i < ARRAY_SIZE(A1hack); i++) - xm_phy_write(hw, port, - A1hack[i].reg, A1hack[i].val); - } + /* External Phy Handling */ + /* Take PHY out of reset. */ + r = skge_read32(hw, B2_GP_IO); + if (port == 0) + r |= GP_DIR_0|GP_IO_0; + else + r |= GP_DIR_2|GP_IO_2; + + skge_write32(hw, B2_GP_IO, r); + skge_read32(hw, B2_GP_IO); + + /* Enable GMII mode on the XMAC. */ + xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD); + + id1 = xm_phy_read(hw, port, PHY_XMAC_ID1); + + /* Optimize MDIO transfer by suppressing preamble. */ + xm_write16(hw, port, XM_MMU_CMD, + xm_read16(hw, port, XM_MMU_CMD) + | XM_MMU_NO_PRE); + + if (id1 == PHY_BCOM_ID1_C0) { /* - * Workaround BCOM Errata (#10523) for all BCom PHYs. - * Disable Power Management after reset. + * Workaround BCOM Errata for the C0 type. + * Write magic patterns to reserved registers. */ - r = xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL); - xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, r | PHY_B_AC_DIS_PM); + for (i = 0; i < ARRAY_SIZE(C0hack); i++) + xm_phy_write(hw, port, + C0hack[i].reg, C0hack[i].val); + + } else if (id1 == PHY_BCOM_ID1_A1) { + /* + * Workaround BCOM Errata for the A1 type. + * Write magic patterns to reserved registers. + */ + for (i = 0; i < ARRAY_SIZE(A1hack); i++) + xm_phy_write(hw, port, + A1hack[i].reg, A1hack[i].val); } + /* + * Workaround BCOM Errata (#10523) for all BCom PHYs. + * Disable Power Management after reset. + */ + r = xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL); + xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, r | PHY_B_AC_DIS_PM); + + /* Dummy read */ xm_read16(hw, port, XM_ISRC); @@ -1098,8 +1083,8 @@ static void genesis_mac_init(struct skge_hw *hw, int port) */ r = xm_read32(hw, port, XM_MODE); xm_write32(hw, port, XM_MODE, - XM_MD_RX_CRCE|XM_MD_RX_LONG|XM_MD_RX_RUNT| - XM_MD_RX_ERR|XM_MD_RX_IRLE); + XM_MD_RX_CRCE|XM_MD_RX_LONG|XM_MD_RX_RUNT| + XM_MD_RX_ERR|XM_MD_RX_IRLE); xm_outaddr(hw, port, XM_SA, hw->dev[port]->dev_addr); xm_outaddr(hw, port, XM_EXM(0), hw->dev[port]->dev_addr); @@ -1150,103 +1135,70 @@ static void genesis_mac_init(struct skge_hw *hw, int port) else xm_write16(hw, port, XM_RX_CMD, r & ~(XM_RX_BIG_PK_OK)); - switch (hw->phy_type) { - case SK_PHY_XMAC: - if (skge->autoneg == AUTONEG_ENABLE) { - ctrl1 = PHY_X_AN_FD | PHY_X_AN_HD; + /* Broadcom phy initialization */ + ctrl1 = PHY_CT_SP1000; + ctrl2 = 0; + ctrl3 = PHY_AN_CSMA; + ctrl4 = PHY_B_PEC_EN_LTR; + ctrl5 = PHY_B_AC_TX_TST; - switch (skge->flow_control) { - case FLOW_MODE_NONE: - ctrl1 |= PHY_X_P_NO_PAUSE; - break; - case FLOW_MODE_LOC_SEND: - ctrl1 |= PHY_X_P_ASYM_MD; - break; - case FLOW_MODE_SYMMETRIC: - ctrl1 |= PHY_X_P_SYM_MD; - break; - case FLOW_MODE_REM_SEND: - ctrl1 |= PHY_X_P_BOTH_MD; - break; - } - - xm_phy_write(hw, port, PHY_XMAC_AUNE_ADV, ctrl1); - ctrl2 = PHY_CT_ANE | PHY_CT_RE_CFG; - } else { - ctrl2 = 0; - if (skge->duplex == DUPLEX_FULL) - ctrl2 |= PHY_CT_DUP_MD; + if (skge->autoneg == AUTONEG_ENABLE) { + /* + * Workaround BCOM Errata #1 for the C5 type. + * 1000Base-T Link Acquisition Failure in Slave Mode + * Set Repeater/DTE bit 10 of the 1000Base-T Control Register + */ + ctrl2 |= PHY_B_1000C_RD; + if (skge->advertising & ADVERTISED_1000baseT_Half) + ctrl2 |= PHY_B_1000C_AHD; + if (skge->advertising & ADVERTISED_1000baseT_Full) + ctrl2 |= PHY_B_1000C_AFD; + + /* Set Flow-control capabilities */ + switch (skge->flow_control) { + case FLOW_MODE_NONE: + ctrl3 |= PHY_B_P_NO_PAUSE; + break; + case FLOW_MODE_LOC_SEND: + ctrl3 |= PHY_B_P_ASYM_MD; + break; + case FLOW_MODE_SYMMETRIC: + ctrl3 |= PHY_B_P_SYM_MD; + break; + case FLOW_MODE_REM_SEND: + ctrl3 |= PHY_B_P_BOTH_MD; + break; } - xm_phy_write(hw, port, PHY_XMAC_CTRL, ctrl2); - break; - - case SK_PHY_BCOM: - ctrl1 = PHY_CT_SP1000; - ctrl2 = 0; - ctrl3 = PHY_AN_CSMA; - ctrl4 = PHY_B_PEC_EN_LTR; - ctrl5 = PHY_B_AC_TX_TST; - - if (skge->autoneg == AUTONEG_ENABLE) { - /* - * Workaround BCOM Errata #1 for the C5 type. - * 1000Base-T Link Acquisition Failure in Slave Mode - * Set Repeater/DTE bit 10 of the 1000Base-T Control Register - */ - ctrl2 |= PHY_B_1000C_RD; - if (skge->advertising & ADVERTISED_1000baseT_Half) - ctrl2 |= PHY_B_1000C_AHD; - if (skge->advertising & ADVERTISED_1000baseT_Full) - ctrl2 |= PHY_B_1000C_AFD; - - /* Set Flow-control capabilities */ - switch (skge->flow_control) { - case FLOW_MODE_NONE: - ctrl3 |= PHY_B_P_NO_PAUSE; - break; - case FLOW_MODE_LOC_SEND: - ctrl3 |= PHY_B_P_ASYM_MD; - break; - case FLOW_MODE_SYMMETRIC: - ctrl3 |= PHY_B_P_SYM_MD; - break; - case FLOW_MODE_REM_SEND: - ctrl3 |= PHY_B_P_BOTH_MD; - break; - } - - /* Restart Auto-negotiation */ - ctrl1 |= PHY_CT_ANE | PHY_CT_RE_CFG; - } else { - if (skge->duplex == DUPLEX_FULL) - ctrl1 |= PHY_CT_DUP_MD; - - ctrl2 |= PHY_B_1000C_MSE; /* set it to Slave */ - } + /* Restart Auto-negotiation */ + ctrl1 |= PHY_CT_ANE | PHY_CT_RE_CFG; + } else { + if (skge->duplex == DUPLEX_FULL) + ctrl1 |= PHY_CT_DUP_MD; - xm_phy_write(hw, port, PHY_BCOM_1000T_CTRL, ctrl2); - xm_phy_write(hw, port, PHY_BCOM_AUNE_ADV, ctrl3); + ctrl2 |= PHY_B_1000C_MSE; /* set it to Slave */ + } - if (skge->netdev->mtu > ETH_DATA_LEN) { - ctrl4 |= PHY_B_PEC_HIGH_LA; - ctrl5 |= PHY_B_AC_LONG_PACK; + xm_phy_write(hw, port, PHY_BCOM_1000T_CTRL, ctrl2); + xm_phy_write(hw, port, PHY_BCOM_AUNE_ADV, ctrl3); - xm_phy_write(hw, port,PHY_BCOM_AUX_CTRL, ctrl5); - } + if (skge->netdev->mtu > ETH_DATA_LEN) { + ctrl4 |= PHY_B_PEC_HIGH_LA; + ctrl5 |= PHY_B_AC_LONG_PACK; - xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, ctrl4); - xm_phy_write(hw, port, PHY_BCOM_CTRL, ctrl1); - break; + xm_phy_write(hw, port,PHY_BCOM_AUX_CTRL, ctrl5); } + + xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, ctrl4); + xm_phy_write(hw, port, PHY_BCOM_CTRL, ctrl1); spin_unlock_bh(&hw->phy_lock); /* Clear MIB counters */ xm_write16(hw, port, XM_STAT_CMD, - XM_SC_CLR_RXC | XM_SC_CLR_TXC); + XM_SC_CLR_RXC | XM_SC_CLR_TXC); /* Clear two times according to Errata #3 */ xm_write16(hw, port, XM_STAT_CMD, - XM_SC_CLR_RXC | XM_SC_CLR_TXC); + XM_SC_CLR_RXC | XM_SC_CLR_TXC); /* Start polling for link status */ mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ); @@ -1256,6 +1208,7 @@ static void genesis_stop(struct skge_port *skge) { struct skge_hw *hw = skge->hw; int port = skge->port; + u32 reg; /* Clear Tx packet arbiter timeout IRQ */ skge_write16(hw, B3_PA_CTRL, @@ -1273,19 +1226,16 @@ static void genesis_stop(struct skge_port *skge) skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_SET_MAC_RST); /* For external PHYs there must be special handling */ - if (hw->phy_type != SK_PHY_XMAC) { - u32 reg = skge_read32(hw, B2_GP_IO); - - if (port == 0) { - reg |= GP_DIR_0; - reg &= ~GP_IO_0; - } else { - reg |= GP_DIR_2; - reg &= ~GP_IO_2; - } - skge_write32(hw, B2_GP_IO, reg); - skge_read32(hw, B2_GP_IO); + reg = skge_read32(hw, B2_GP_IO); + if (port == 0) { + reg |= GP_DIR_0; + reg &= ~GP_IO_0; + } else { + reg |= GP_DIR_2; + reg &= ~GP_IO_2; } + skge_write32(hw, B2_GP_IO, reg); + skge_read32(hw, B2_GP_IO); xm_write16(hw, port, XM_MMU_CMD, xm_read16(hw, port, XM_MMU_CMD) @@ -1329,16 +1279,6 @@ static void genesis_mac_intr(struct skge_hw *hw, int port) u16 status = xm_read16(hw, port, XM_ISRC); pr_debug("genesis_intr status %x\n", status); - if (hw->phy_type == SK_PHY_XMAC) { - /* LInk down, start polling for state change */ - if (status & XM_IS_INP_ASS) { - xm_write16(hw, port, XM_IMSK, - xm_read16(hw, port, XM_IMSK) | XM_IS_INP_ASS); - mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ); - } - else if (status & XM_IS_AND) - mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ); - } if (status & XM_IS_TXF_UR) { xm_write32(hw, port, XM_MODE, XM_MD_FTF); @@ -1458,28 +1398,25 @@ static void genesis_link_up(struct skge_port *skge) xm_write32(hw, port, XM_MODE, mode); msk = XM_DEF_MSK; - if (hw->phy_type != SK_PHY_XMAC) - msk |= XM_IS_INP_ASS; /* disable GP0 interrupt bit */ + /* disable GP0 interrupt bit for external Phy */ + msk |= XM_IS_INP_ASS; xm_write16(hw, port, XM_IMSK, msk); xm_read16(hw, port, XM_ISRC); /* get MMU Command Reg. */ cmd = xm_read16(hw, port, XM_MMU_CMD); - if (hw->phy_type != SK_PHY_XMAC && skge->duplex == DUPLEX_FULL) + if (skge->duplex == DUPLEX_FULL) cmd |= XM_MMU_GMII_FD; - if (hw->phy_type == SK_PHY_BCOM) { - /* - * Workaround BCOM Errata (#10523) for all BCom Phys - * Enable Power Management after link up - */ - xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, - xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL) - & ~PHY_B_AC_DIS_PM); - xm_phy_write(hw, port, PHY_BCOM_INT_MASK, - PHY_B_DEF_MSK); - } + /* + * Workaround BCOM Errata (#10523) for all BCom Phys + * Enable Power Management after link up + */ + xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, + xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL) + & ~PHY_B_AC_DIS_PM); + xm_phy_write(hw, port, PHY_BCOM_INT_MASK, PHY_B_DEF_MSK); /* enable Rx/Tx */ xm_write16(hw, port, XM_MMU_CMD, @@ -1551,25 +1488,12 @@ static void skge_link_timer(unsigned long __arg) { struct skge_port *skge = (struct skge_port *) __arg; struct skge_hw *hw = skge->hw; - int port = skge->port; if (hw->chip_id != CHIP_ID_GENESIS || !netif_running(skge->netdev)) return; spin_lock_bh(&hw->phy_lock); - if (hw->phy_type == SK_PHY_BCOM) - genesis_bcom_intr(skge); - else { - int i; - for (i = 0; i < 3; i++) - if (xm_read16(hw, port, XM_ISRC) & XM_IS_INP_ASS) - break; - - if (i == 3) - mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ); - else - genesis_link_up(skge); - } + genesis_bcom_intr(skge); spin_unlock_bh(&hw->phy_lock); } @@ -2737,7 +2661,7 @@ static void skge_extirq(unsigned long data) if (hw->chip_id != CHIP_ID_GENESIS) yukon_phy_intr(skge); - else if (hw->phy_type == SK_PHY_BCOM) + else genesis_bcom_intr(skge); } } @@ -2886,9 +2810,6 @@ static int skge_reset(struct skge_hw *hw) switch (hw->chip_id) { case CHIP_ID_GENESIS: switch (hw->phy_type) { - case SK_PHY_XMAC: - hw->phy_addr = PHY_ADDR_XMAC; - break; case SK_PHY_BCOM: hw->phy_addr = PHY_ADDR_BCOM; break; |