ath6kl: Optimize target power in deep sleep suspend

Adding below steps helps to get good power numbers
in deep sleep suspend path,

    * Disable WOW mode.
    * Flush data packets and wait for all control packets.
      to be cleared in TX path before deep sleep suspend.
    * Set host sleep mode to SLEEP.

Below steps are added to perform the recovery action
while the system resume from deep sleep,

     * Set host sleep mode to AWAKE.
     * Reset scan parameters to default value.

In addition, Debug prints are added to track deep sleep
suspend/resume state.

Signed-off-by: Raja Mani <rmani@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

1 files changed, 81 insertions, 17 deletions

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index e3c4c40..8091028 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -2130,6 +2130,77 @@ static int ath6kl_wow_resume(struct ath6kl *ar)
 	return 0;
 }
 
+static int ath6kl_cfg80211_deepsleep_suspend(struct ath6kl *ar)
+{
+	struct ath6kl_vif *vif;
+	int ret;
+
+	vif = ath6kl_vif_first(ar);
+	if (!vif)
+		return -EIO;
+
+	if (!ath6kl_cfg80211_ready(vif))
+		return -EIO;
+
+	ath6kl_cfg80211_stop_all(ar);
+
+	/* Save the current power mode before enabling power save */
+	ar->wmi->saved_pwr_mode = ar->wmi->pwr_mode;
+
+	ret = ath6kl_wmi_powermode_cmd(ar->wmi, 0, REC_POWER);
+	if (ret)
+		return ret;
+
+	/* Disable WOW mode */
+	ret = ath6kl_wmi_set_wow_mode_cmd(ar->wmi, vif->fw_vif_idx,
+					  ATH6KL_WOW_MODE_DISABLE,
+					  0, 0);
+	if (ret)
+		return ret;
+
+	/* Flush all non control pkts in TX path */
+	ath6kl_tx_data_cleanup(ar);
+
+	ret = ath6kl_cfg80211_host_sleep(ar, vif);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int ath6kl_cfg80211_deepsleep_resume(struct ath6kl *ar)
+{
+	struct ath6kl_vif *vif;
+	int ret;
+
+	vif = ath6kl_vif_first(ar);
+
+	if (!vif)
+		return -EIO;
+
+	if (ar->wmi->pwr_mode != ar->wmi->saved_pwr_mode) {
+		ret = ath6kl_wmi_powermode_cmd(ar->wmi, 0,
+					       ar->wmi->saved_pwr_mode);
+		if (ret)
+			return ret;
+	}
+
+	ret = ath6kl_wmi_set_host_sleep_mode_cmd(ar->wmi, vif->fw_vif_idx,
+						 ATH6KL_HOST_MODE_AWAKE);
+	if (ret)
+		return ret;
+
+	ar->state = ATH6KL_STATE_ON;
+
+	/* Reset scan parameter to default values */
+	ret = ath6kl_wmi_scanparams_cmd(ar->wmi, vif->fw_vif_idx,
+					0, 0, 0, 0, 0, 0, 3, 0, 0, 0);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
 int ath6kl_cfg80211_suspend(struct ath6kl *ar,
 			    enum ath6kl_cfg_suspend_mode mode,
 			    struct cfg80211_wowlan *wow)
@@ -2158,15 +2229,12 @@ int ath6kl_cfg80211_suspend(struct ath6kl *ar,
 
 	case ATH6KL_CFG_SUSPEND_DEEPSLEEP:
 
-		ath6kl_cfg80211_stop_all(ar);
-
-		/* save the current power mode before enabling power save */
-		ar->wmi->saved_pwr_mode = ar->wmi->pwr_mode;
+		ath6kl_dbg(ATH6KL_DBG_SUSPEND, "deep sleep suspend\n");
 
-		ret = ath6kl_wmi_powermode_cmd(ar->wmi, 0, REC_POWER);
+		ret = ath6kl_cfg80211_deepsleep_suspend(ar);
 		if (ret) {
-			ath6kl_warn("wmi powermode command failed during suspend: %d\n",
-				    ret);
+			ath6kl_err("deepsleep suspend failed: %d\n", ret);
+			return ret;
 		}
 
 		ar->state = ATH6KL_STATE_DEEPSLEEP;
@@ -2227,17 +2295,13 @@ int ath6kl_cfg80211_resume(struct ath6kl *ar)
 		break;
 
 	case ATH6KL_STATE_DEEPSLEEP:
-		if (ar->wmi->pwr_mode != ar->wmi->saved_pwr_mode) {
-			ret = ath6kl_wmi_powermode_cmd(ar->wmi, 0,
-						       ar->wmi->saved_pwr_mode);
-			if (ret) {
-				ath6kl_warn("wmi powermode command failed during resume: %d\n",
-					    ret);
-			}
-		}
-
-		ar->state = ATH6KL_STATE_ON;
+		ath6kl_dbg(ATH6KL_DBG_SUSPEND, "deep sleep resume\n");
 
+		ret = ath6kl_cfg80211_deepsleep_resume(ar);
+		if (ret) {
+			ath6kl_warn("deep sleep resume failed: %d\n", ret);
+			return ret;
+		}
 		break;
 
 	case ATH6KL_STATE_CUTPOWER: