Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem

Conflicts:
	drivers/net/wireless/iwlwifi/iwl-1000.c
	drivers/net/wireless/iwlwifi/iwl-6000.c
	drivers/net/wireless/iwlwifi/iwl-core.h

1 files changed, 1 insertions, 27 deletions

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index da4a571..8d60f4f 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -578,10 +578,7 @@ static void ar9003_hw_prog_ini(struct ath_hw *ah,
 		u32 reg = INI_RA(iniArr, i, 0);
 		u32 val = INI_RA(iniArr, i, column);
 
-		if (reg >= 0x16000 && reg < 0x17000)
-			ath9k_hw_analog_shift_regwrite(ah, reg, val);
-		else
-			REG_WRITE(ah, reg, val);
+		REG_WRITE(ah, reg, val);
 
 		DO_DELAY(regWrites);
 	}
@@ -748,28 +745,6 @@ static void ar9003_hw_rfbus_done(struct ath_hw *ah)
 	REG_WRITE(ah, AR_PHY_RFBUS_REQ, 0);
 }
 
-/*
- * Set the interrupt and GPIO values so the ISR can disable RF
- * on a switch signal.  Assumes GPIO port and interrupt polarity
- * are set prior to call.
- */
-static void ar9003_hw_enable_rfkill(struct ath_hw *ah)
-{
-	/* Connect rfsilent_bb_l to baseband */
-	REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
-		    AR_GPIO_INPUT_EN_VAL_RFSILENT_BB);
-	/* Set input mux for rfsilent_bb_l to GPIO #0 */
-	REG_CLR_BIT(ah, AR_GPIO_INPUT_MUX2,
-		    AR_GPIO_INPUT_MUX2_RFSILENT);
-
-	/*
-	 * Configure the desired GPIO port for input and
-	 * enable baseband rf silence.
-	 */
-	ath9k_hw_cfg_gpio_input(ah, ah->rfkill_gpio);
-	REG_SET_BIT(ah, AR_PHY_TEST, RFSILENT_BB);
-}
-
 static void ar9003_hw_set_diversity(struct ath_hw *ah, bool value)
 {
 	u32 v = REG_READ(ah, AR_PHY_CCK_DETECT);
@@ -1206,7 +1181,6 @@ void ar9003_hw_attach_phy_ops(struct ath_hw *ah)
 	priv_ops->set_delta_slope = ar9003_hw_set_delta_slope;
 	priv_ops->rfbus_req = ar9003_hw_rfbus_req;
 	priv_ops->rfbus_done = ar9003_hw_rfbus_done;
-	priv_ops->enable_rfkill = ar9003_hw_enable_rfkill;
 	priv_ops->set_diversity = ar9003_hw_set_diversity;
 	priv_ops->ani_control = ar9003_hw_ani_control;
 	priv_ops->do_getnf = ar9003_hw_do_getnf;