drivers/net: Remove boolean comparisons to true/false

Booleans should not be compared to true or false
but be directly tested or tested with !.

Done via cocci script:

@@
bool t;
@@
- t == true
+ t
@@
bool t;
@@
- t != true
+ !t
@@
bool t;
@@
- t == false
+ !t
@@
bool t;
@@
- t != false
+ t

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 6 insertions, 8 deletions

diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
index 48c7b5d..5c4d9bc 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
@@ -693,7 +693,7 @@ static bool _rtl92ce_init_mac(struct ieee80211_hw *hw)
 
 	rtl_write_word(rtlpriv, REG_CR, 0x2ff);
 
-	if (_rtl92ce_llt_table_init(hw) == false)
+	if (!_rtl92ce_llt_table_init(hw))
 		return false;
 
 	rtl_write_dword(rtlpriv, REG_HISR, 0xffffffff);
@@ -906,7 +906,7 @@ int rtl92ce_hw_init(struct ieee80211_hw *hw)
 	rtlpci->being_init_adapter = true;
 	rtlpriv->intf_ops->disable_aspm(hw);
 	rtstatus = _rtl92ce_init_mac(hw);
-	if (rtstatus != true) {
+	if (!rtstatus) {
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n");
 		err = 1;
 		return err;
@@ -1117,7 +1117,7 @@ void rtl92ce_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
 		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR,
 					      (u8 *) (&reg_rcr));
 		_rtl92ce_set_bcn_ctrl_reg(hw, 0, BIT(4));
-	} else if (check_bssid == false) {
+	} else if (!check_bssid) {
 		reg_rcr &= (~(RCR_CBSSID_DATA | RCR_CBSSID_BCN));
 		_rtl92ce_set_bcn_ctrl_reg(hw, BIT(4), 0);
 		rtlpriv->cfg->ops->set_hw_reg(hw,
@@ -1985,8 +1985,7 @@ bool rtl92ce_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid)
 		e_rfpowerstate_toset = ERFON;
 		ppsc->hwradiooff = false;
 		actuallyset = true;
-	} else if ((ppsc->hwradiooff == false)
-		   && (e_rfpowerstate_toset == ERFOFF)) {
+	} else if (!ppsc->hwradiooff && (e_rfpowerstate_toset == ERFOFF)) {
 		RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
 			 "GPIOChangeRF  - HW Radio OFF, RF OFF\n");
 
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c
index c64daf2..88deae6 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c
@@ -522,8 +522,7 @@ static bool _rtl92ce_phy_set_rf_power_state(struct ieee80211_hw *hw,
 					RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
 						 "IPS Set eRf nic enable\n");
 					rtstatus = rtl_ps_enable_nic(hw);
-				} while ((rtstatus != true)
-					 && (InitializeCount < 10));
+				} while (!rtstatus && (InitializeCount < 10));
 				RT_CLEAR_PS_LEVEL(ppsc,
 						  RT_RF_OFF_LEVL_HALT_NIC);
 			} else {
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/rf.c b/drivers/net/wireless/rtlwifi/rtl8192ce/rf.c
index 69d720d..54c7614 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/rf.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/rf.c
@@ -503,7 +503,7 @@ static bool _rtl92ce_phy_rf6052_config_parafile(struct ieee80211_hw *hw)
 			break;
 		}
 
-		if (rtstatus != true) {
+		if (!rtstatus) {
 			RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
 				 "Radio[%d] Fail!!\n", rfpath);
 			return false;