wl1271: Change wl12xx Files Names

All files name prefix removed due to the fact that wl12xx driver supports
wl1271 and wl1273.
Also the definition in Kconfig and header files changed respectively.

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>

1 files changed, 591 insertions, 0 deletions

diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c
new file mode 100644
index 0000000..1eafb81
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/boot.c
@@ -0,0 +1,591 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/gpio.h>
+#include <linux/slab.h>
+
+#include "acx.h"
+#include "reg.h"
+#include "boot.h"
+#include "io.h"
+#include "event.h"
+
+static struct wl1271_partition_set part_table[PART_TABLE_LEN] = {
+	[PART_DOWN] = {
+		.mem = {
+			.start = 0x00000000,
+			.size  = 0x000177c0
+		},
+		.reg = {
+			.start = REGISTERS_BASE,
+			.size  = 0x00008800
+		},
+		.mem2 = {
+			.start = 0x00000000,
+			.size  = 0x00000000
+		},
+		.mem3 = {
+			.start = 0x00000000,
+			.size  = 0x00000000
+		},
+	},
+
+	[PART_WORK] = {
+		.mem = {
+			.start = 0x00040000,
+			.size  = 0x00014fc0
+		},
+		.reg = {
+			.start = REGISTERS_BASE,
+			.size  = 0x0000a000
+		},
+		.mem2 = {
+			.start = 0x003004f8,
+			.size  = 0x00000004
+		},
+		.mem3 = {
+			.start = 0x00040404,
+			.size  = 0x00000000
+		},
+	},
+
+	[PART_DRPW] = {
+		.mem = {
+			.start = 0x00040000,
+			.size  = 0x00014fc0
+		},
+		.reg = {
+			.start = DRPW_BASE,
+			.size  = 0x00006000
+		},
+		.mem2 = {
+			.start = 0x00000000,
+			.size  = 0x00000000
+		},
+		.mem3 = {
+			.start = 0x00000000,
+			.size  = 0x00000000
+		}
+	}
+};
+
+static void wl1271_boot_set_ecpu_ctrl(struct wl1271 *wl, u32 flag)
+{
+	u32 cpu_ctrl;
+
+	/* 10.5.0 run the firmware (I) */
+	cpu_ctrl = wl1271_read32(wl, ACX_REG_ECPU_CONTROL);
+
+	/* 10.5.1 run the firmware (II) */
+	cpu_ctrl |= flag;
+	wl1271_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl);
+}
+
+static void wl1271_boot_fw_version(struct wl1271 *wl)
+{
+	struct wl1271_static_data static_data;
+
+	wl1271_read(wl, wl->cmd_box_addr, &static_data, sizeof(static_data),
+		    false);
+
+	strncpy(wl->chip.fw_ver, static_data.fw_version,
+		sizeof(wl->chip.fw_ver));
+
+	/* make sure the string is NULL-terminated */
+	wl->chip.fw_ver[sizeof(wl->chip.fw_ver) - 1] = '\0';
+}
+
+static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf,
+					     size_t fw_data_len, u32 dest)
+{
+	struct wl1271_partition_set partition;
+	int addr, chunk_num, partition_limit;
+	u8 *p, *chunk;
+
+	/* whal_FwCtrl_LoadFwImageSm() */
+
+	wl1271_debug(DEBUG_BOOT, "starting firmware upload");
+
+	wl1271_debug(DEBUG_BOOT, "fw_data_len %zd chunk_size %d",
+		     fw_data_len, CHUNK_SIZE);
+
+	if ((fw_data_len % 4) != 0) {
+		wl1271_error("firmware length not multiple of four");
+		return -EIO;
+	}
+
+	chunk = kmalloc(CHUNK_SIZE, GFP_KERNEL);
+	if (!chunk) {
+		wl1271_error("allocation for firmware upload chunk failed");
+		return -ENOMEM;
+	}
+
+	memcpy(&partition, &part_table[PART_DOWN], sizeof(partition));
+	partition.mem.start = dest;
+	wl1271_set_partition(wl, &partition);
+
+	/* 10.1 set partition limit and chunk num */
+	chunk_num = 0;
+	partition_limit = part_table[PART_DOWN].mem.size;
+
+	while (chunk_num < fw_data_len / CHUNK_SIZE) {
+		/* 10.2 update partition, if needed */
+		addr = dest + (chunk_num + 2) * CHUNK_SIZE;
+		if (addr > partition_limit) {
+			addr = dest + chunk_num * CHUNK_SIZE;
+			partition_limit = chunk_num * CHUNK_SIZE +
+				part_table[PART_DOWN].mem.size;
+			partition.mem.start = addr;
+			wl1271_set_partition(wl, &partition);
+		}
+
+		/* 10.3 upload the chunk */
+		addr = dest + chunk_num * CHUNK_SIZE;
+		p = buf + chunk_num * CHUNK_SIZE;
+		memcpy(chunk, p, CHUNK_SIZE);
+		wl1271_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x",
+			     p, addr);
+		wl1271_write(wl, addr, chunk, CHUNK_SIZE, false);
+
+		chunk_num++;
+	}
+
+	/* 10.4 upload the last chunk */
+	addr = dest + chunk_num * CHUNK_SIZE;
+	p = buf + chunk_num * CHUNK_SIZE;
+	memcpy(chunk, p, fw_data_len % CHUNK_SIZE);
+	wl1271_debug(DEBUG_BOOT, "uploading fw last chunk (%zd B) 0x%p to 0x%x",
+		     fw_data_len % CHUNK_SIZE, p, addr);
+	wl1271_write(wl, addr, chunk, fw_data_len % CHUNK_SIZE, false);
+
+	kfree(chunk);
+	return 0;
+}
+
+static int wl1271_boot_upload_firmware(struct wl1271 *wl)
+{
+	u32 chunks, addr, len;
+	int ret = 0;
+	u8 *fw;
+
+	fw = wl->fw;
+	chunks = be32_to_cpup((__be32 *) fw);
+	fw += sizeof(u32);
+
+	wl1271_debug(DEBUG_BOOT, "firmware chunks to be uploaded: %u", chunks);
+
+	while (chunks--) {
+		addr = be32_to_cpup((__be32 *) fw);
+		fw += sizeof(u32);
+		len = be32_to_cpup((__be32 *) fw);
+		fw += sizeof(u32);
+
+		if (len > 300000) {
+			wl1271_info("firmware chunk too long: %u", len);
+			return -EINVAL;
+		}
+		wl1271_debug(DEBUG_BOOT, "chunk %d addr 0x%x len %u",
+			     chunks, addr, len);
+		ret = wl1271_boot_upload_firmware_chunk(wl, fw, len, addr);
+		if (ret != 0)
+			break;
+		fw += len;
+	}
+
+	return ret;
+}
+
+static int wl1271_boot_upload_nvs(struct wl1271 *wl)
+{
+	size_t nvs_len, burst_len;
+	int i;
+	u32 dest_addr, val;
+	u8 *nvs_ptr, *nvs_aligned;
+
+	if (wl->nvs == NULL)
+		return -ENODEV;
+
+	/*
+	 * FIXME: the LEGACY NVS image support (NVS's missing the 5GHz band
+	 * configurations) can be removed when those NVS files stop floating
+	 * around.
+	 */
+	if (wl->nvs_len == sizeof(struct wl1271_nvs_file) ||
+	    wl->nvs_len == WL1271_INI_LEGACY_NVS_FILE_SIZE) {
+		if (wl->nvs->general_params.dual_mode_select)
+			wl->enable_11a = true;
+	}
+
+	if (wl->nvs_len != sizeof(struct wl1271_nvs_file) &&
+	    (wl->nvs_len != WL1271_INI_LEGACY_NVS_FILE_SIZE ||
+	     wl->enable_11a)) {
+		wl1271_error("nvs size is not as expected: %zu != %zu",
+			     wl->nvs_len, sizeof(struct wl1271_nvs_file));
+		kfree(wl->nvs);
+		wl->nvs = NULL;
+		wl->nvs_len = 0;
+		return -EILSEQ;
+	}
+
+	/* only the first part of the NVS needs to be uploaded */
+	nvs_len = sizeof(wl->nvs->nvs);
+	nvs_ptr = (u8 *)wl->nvs->nvs;
+
+	/* update current MAC address to NVS */
+	nvs_ptr[11] = wl->mac_addr[0];
+	nvs_ptr[10] = wl->mac_addr[1];
+	nvs_ptr[6] = wl->mac_addr[2];
+	nvs_ptr[5] = wl->mac_addr[3];
+	nvs_ptr[4] = wl->mac_addr[4];
+	nvs_ptr[3] = wl->mac_addr[5];
+
+	/*
+	 * Layout before the actual NVS tables:
+	 * 1 byte : burst length.
+	 * 2 bytes: destination address.
+	 * n bytes: data to burst copy.
+	 *
+	 * This is ended by a 0 length, then the NVS tables.
+	 */
+
+	/* FIXME: Do we need to check here whether the LSB is 1? */
+	while (nvs_ptr[0]) {
+		burst_len = nvs_ptr[0];
+		dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8));
+
+		/*
+		 * Due to our new wl1271_translate_reg_addr function,
+		 * we need to add the REGISTER_BASE to the destination
+		 */
+		dest_addr += REGISTERS_BASE;
+
+		/* We move our pointer to the data */
+		nvs_ptr += 3;
+
+		for (i = 0; i < burst_len; i++) {
+			val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
+			       | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
+
+			wl1271_debug(DEBUG_BOOT,
+				     "nvs burst write 0x%x: 0x%x",
+				     dest_addr, val);
+			wl1271_write32(wl, dest_addr, val);
+
+			nvs_ptr += 4;
+			dest_addr += 4;
+		}
+	}
+
+	/*
+	 * We've reached the first zero length, the first NVS table
+	 * is located at an aligned offset which is at least 7 bytes further.
+	 */
+	nvs_ptr = (u8 *)wl->nvs->nvs +
+			ALIGN(nvs_ptr - (u8 *)wl->nvs->nvs + 7, 4);
+	nvs_len -= nvs_ptr - (u8 *)wl->nvs->nvs;
+
+	/* Now we must set the partition correctly */
+	wl1271_set_partition(wl, &part_table[PART_WORK]);
+
+	/* Copy the NVS tables to a new block to ensure alignment */
+	nvs_aligned = kmemdup(nvs_ptr, nvs_len, GFP_KERNEL);
+	if (!nvs_aligned)
+		return -ENOMEM;
+
+	/* And finally we upload the NVS tables */
+	wl1271_write(wl, CMD_MBOX_ADDRESS, nvs_aligned, nvs_len, false);
+
+	kfree(nvs_aligned);
+	return 0;
+}
+
+static void wl1271_boot_enable_interrupts(struct wl1271 *wl)
+{
+	wl1271_enable_interrupts(wl);
+	wl1271_write32(wl, ACX_REG_INTERRUPT_MASK,
+		       WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK));
+	wl1271_write32(wl, HI_CFG, HI_CFG_DEF_VAL);
+}
+
+static int wl1271_boot_soft_reset(struct wl1271 *wl)
+{
+	unsigned long timeout;
+	u32 boot_data;
+
+	/* perform soft reset */
+	wl1271_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
+
+	/* SOFT_RESET is self clearing */
+	timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME);
+	while (1) {
+		boot_data = wl1271_read32(wl, ACX_REG_SLV_SOFT_RESET);
+		wl1271_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data);
+		if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0)
+			break;
+
+		if (time_after(jiffies, timeout)) {
+			/* 1.2 check pWhalBus->uSelfClearTime if the
+			 * timeout was reached */
+			wl1271_error("soft reset timeout");
+			return -1;
+		}
+
+		udelay(SOFT_RESET_STALL_TIME);
+	}
+
+	/* disable Rx/Tx */
+	wl1271_write32(wl, ENABLE, 0x0);
+
+	/* disable auto calibration on start*/
+	wl1271_write32(wl, SPARE_A2, 0xffff);
+
+	return 0;
+}
+
+static int wl1271_boot_run_firmware(struct wl1271 *wl)
+{
+	int loop, ret;
+	u32 chip_id, intr;
+
+	wl1271_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
+
+	chip_id = wl1271_read32(wl, CHIP_ID_B);
+
+	wl1271_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);
+
+	if (chip_id != wl->chip.id) {
+		wl1271_error("chip id doesn't match after firmware boot");
+		return -EIO;
+	}
+
+	/* wait for init to complete */
+	loop = 0;
+	while (loop++ < INIT_LOOP) {
+		udelay(INIT_LOOP_DELAY);
+		intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+
+		if (intr == 0xffffffff) {
+			wl1271_error("error reading hardware complete "
+				     "init indication");
+			return -EIO;
+		}
+		/* check that ACX_INTR_INIT_COMPLETE is enabled */
+		else if (intr & WL1271_ACX_INTR_INIT_COMPLETE) {
+			wl1271_write32(wl, ACX_REG_INTERRUPT_ACK,
+				       WL1271_ACX_INTR_INIT_COMPLETE);
+			break;
+		}
+	}
+
+	if (loop > INIT_LOOP) {
+		wl1271_error("timeout waiting for the hardware to "
+			     "complete initialization");
+		return -EIO;
+	}
+
+	/* get hardware config command mail box */
+	wl->cmd_box_addr = wl1271_read32(wl, REG_COMMAND_MAILBOX_PTR);
+
+	/* get hardware config event mail box */
+	wl->event_box_addr = wl1271_read32(wl, REG_EVENT_MAILBOX_PTR);
+
+	/* set the working partition to its "running" mode offset */
+	wl1271_set_partition(wl, &part_table[PART_WORK]);
+
+	wl1271_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x",
+		     wl->cmd_box_addr, wl->event_box_addr);
+
+	wl1271_boot_fw_version(wl);
+
+	/*
+	 * in case of full asynchronous mode the firmware event must be
+	 * ready to receive event from the command mailbox
+	 */
+
+	/* unmask required mbox events  */
+	wl->event_mask = BSS_LOSE_EVENT_ID |
+		SCAN_COMPLETE_EVENT_ID |
+		PS_REPORT_EVENT_ID |
+		JOIN_EVENT_COMPLETE_ID |
+		DISCONNECT_EVENT_COMPLETE_ID |
+		RSSI_SNR_TRIGGER_0_EVENT_ID |
+		PSPOLL_DELIVERY_FAILURE_EVENT_ID |
+		SOFT_GEMINI_SENSE_EVENT_ID;
+
+	ret = wl1271_event_unmask(wl);
+	if (ret < 0) {
+		wl1271_error("EVENT mask setting failed");
+		return ret;
+	}
+
+	wl1271_event_mbox_config(wl);
+
+	/* firmware startup completed */
+	return 0;
+}
+
+static int wl1271_boot_write_irq_polarity(struct wl1271 *wl)
+{
+	u32 polarity;
+
+	polarity = wl1271_top_reg_read(wl, OCP_REG_POLARITY);
+
+	/* We use HIGH polarity, so unset the LOW bit */
+	polarity &= ~POLARITY_LOW;
+	wl1271_top_reg_write(wl, OCP_REG_POLARITY, polarity);
+
+	return 0;
+}
+
+static void wl1271_boot_hw_version(struct wl1271 *wl)
+{
+	u32 fuse;
+
+	fuse = wl1271_top_reg_read(wl, REG_FUSE_DATA_2_1);
+	fuse = (fuse & PG_VER_MASK) >> PG_VER_OFFSET;
+
+	wl->hw_pg_ver = (s8)fuse;
+}
+
+int wl1271_boot(struct wl1271 *wl)
+{
+	int ret = 0;
+	u32 tmp, clk, pause;
+
+	wl1271_boot_hw_version(wl);
+
+	if (wl->ref_clock == 0 || wl->ref_clock == 2 || wl->ref_clock == 4)
+		/* ref clk: 19.2/38.4/38.4-XTAL */
+		clk = 0x3;
+	else if (wl->ref_clock == 1 || wl->ref_clock == 3)
+		/* ref clk: 26/52 */
+		clk = 0x5;
+	else
+		return -EINVAL;
+
+	if (wl->ref_clock != 0) {
+		u16 val;
+		/* Set clock type (open drain) */
+		val = wl1271_top_reg_read(wl, OCP_REG_CLK_TYPE);
+		val &= FREF_CLK_TYPE_BITS;
+		wl1271_top_reg_write(wl, OCP_REG_CLK_TYPE, val);
+
+		/* Set clock pull mode (no pull) */
+		val = wl1271_top_reg_read(wl, OCP_REG_CLK_PULL);
+		val |= NO_PULL;
+		wl1271_top_reg_write(wl, OCP_REG_CLK_PULL, val);
+	} else {
+		u16 val;
+		/* Set clock polarity */
+		val = wl1271_top_reg_read(wl, OCP_REG_CLK_POLARITY);
+		val &= FREF_CLK_POLARITY_BITS;
+		val |= CLK_REQ_OUTN_SEL;
+		wl1271_top_reg_write(wl, OCP_REG_CLK_POLARITY, val);
+	}
+
+	wl1271_write32(wl, PLL_PARAMETERS, clk);
+
+	pause = wl1271_read32(wl, PLL_PARAMETERS);
+
+	wl1271_debug(DEBUG_BOOT, "pause1 0x%x", pause);
+
+	pause &= ~(WU_COUNTER_PAUSE_VAL);
+	pause |= WU_COUNTER_PAUSE_VAL;
+	wl1271_write32(wl, WU_COUNTER_PAUSE, pause);
+
+	/* Continue the ELP wake up sequence */
+	wl1271_write32(wl, WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
+	udelay(500);
+
+	wl1271_set_partition(wl, &part_table[PART_DRPW]);
+
+	/* Read-modify-write DRPW_SCRATCH_START register (see next state)
+	   to be used by DRPw FW. The RTRIM value will be added by the FW
+	   before taking DRPw out of reset */
+
+	wl1271_debug(DEBUG_BOOT, "DRPW_SCRATCH_START %08x", DRPW_SCRATCH_START);
+	clk = wl1271_read32(wl, DRPW_SCRATCH_START);
+
+	wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk);
+
+	clk |= (wl->ref_clock << 1) << 4;
+	wl1271_write32(wl, DRPW_SCRATCH_START, clk);
+
+	wl1271_set_partition(wl, &part_table[PART_WORK]);
+
+	/* Disable interrupts */
+	wl1271_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
+
+	ret = wl1271_boot_soft_reset(wl);
+	if (ret < 0)
+		goto out;
+
+	/* 2. start processing NVS file */
+	ret = wl1271_boot_upload_nvs(wl);
+	if (ret < 0)
+		goto out;
+
+	/* write firmware's last address (ie. it's length) to
+	 * ACX_EEPROMLESS_IND_REG */
+	wl1271_debug(DEBUG_BOOT, "ACX_EEPROMLESS_IND_REG");
+
+	wl1271_write32(wl, ACX_EEPROMLESS_IND_REG, ACX_EEPROMLESS_IND_REG);
+
+	tmp = wl1271_read32(wl, CHIP_ID_B);
+
+	wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp);
+
+	/* 6. read the EEPROM parameters */
+	tmp = wl1271_read32(wl, SCR_PAD2);
+
+	ret = wl1271_boot_write_irq_polarity(wl);
+	if (ret < 0)
+		goto out;
+
+	wl1271_write32(wl, ACX_REG_INTERRUPT_MASK,
+		       WL1271_ACX_ALL_EVENTS_VECTOR);
+
+	/* WL1271: The reference driver skips steps 7 to 10 (jumps directly
+	 * to upload_fw) */
+
+	ret = wl1271_boot_upload_firmware(wl);
+	if (ret < 0)
+		goto out;
+
+	/* 10.5 start firmware */
+	ret = wl1271_boot_run_firmware(wl);
+	if (ret < 0)
+		goto out;
+
+	/* Enable firmware interrupts now */
+	wl1271_boot_enable_interrupts(wl);
+
+	/* set the wl1271 default filters */
+	wl->rx_config = WL1271_DEFAULT_RX_CONFIG;
+	wl->rx_filter = WL1271_DEFAULT_RX_FILTER;
+
+	wl1271_event_mbox_config(wl);
+
+out:
+	return ret;
+}