diff options
| author | Lennert Buytenhek <buytenh@wantstofly.org> | 2010-01-12 12:48:56 (GMT) |
|---|---|---|
| committer | John W. Linville <linville@tuxdriver.com> | 2010-01-12 19:21:15 (GMT) |
| commit | 854783444bab0024556c0aefdb0a860f2f1da286 (patch) | |
| tree | ab03e580902c04e6d0b69a7cffedc1cf14399eb4 /drivers/net/wireless | |
| parent | 4eae9edd38c0a9ce34e39100ccc69ff520bc1224 (diff) | |
| download | linux-fsl-qoriq-854783444bab0024556c0aefdb0a860f2f1da286.tar.xz | |
mwl8k: properly set receive status rate index on 5 GHz receive
The mwl8k firmware uses indices into the 2.4 GHz band rate table for
the receive descriptor channel field even if the packet was received
on a 5 GHz channel, while mac80211 expects an index into the 5 GHz
band rate table when packets are received on the 5 GHz band, which
presents a mismatch as the 5 GHz band rate table lacks the five
non-OFDM rates that the 2.4 GHz rate table starts with.
To handle this properly, we need to substract 5 from the rate index
field if the packet was received on a 5 GHz channel (and was not
received at an MCS rate).
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless')
| -rw-r--r-- | drivers/net/wireless/mwl8k.c | 16 |
1 files changed, 14 insertions, 2 deletions
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 13dded4..cc2ce61 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -759,7 +759,13 @@ mwl8k_rxd_8366_ap_process(void *_rxd, struct ieee80211_rx_status *status, } } - status->band = IEEE80211_BAND_2GHZ; + if (rxd->channel > 14) { + status->band = IEEE80211_BAND_5GHZ; + if (!(status->flag & RX_FLAG_HT)) + status->rate_idx -= 5; + } else { + status->band = IEEE80211_BAND_2GHZ; + } status->freq = ieee80211_channel_to_frequency(rxd->channel); *qos = rxd->qos_control; @@ -850,7 +856,13 @@ mwl8k_rxd_sta_process(void *_rxd, struct ieee80211_rx_status *status, if (rate_info & MWL8K_STA_RATE_INFO_MCS_FORMAT) status->flag |= RX_FLAG_HT; - status->band = IEEE80211_BAND_2GHZ; + if (rxd->channel > 14) { + status->band = IEEE80211_BAND_5GHZ; + if (!(status->flag & RX_FLAG_HT)) + status->rate_idx -= 5; + } else { + status->band = IEEE80211_BAND_2GHZ; + } status->freq = ieee80211_channel_to_frequency(rxd->channel); *qos = rxd->qos_control; |