diff options
author | Arend van Spriel <arend@broadcom.com> | 2011-12-08 23:06:46 (GMT) |
---|---|---|
committer | John W. Linville <linville@tuxdriver.com> | 2011-12-13 20:31:59 (GMT) |
commit | 2e756560a8a47ce754b852d0bc1ff7549433d0eb (patch) | |
tree | 700a6fdd3f2f27fc2ab7c8f289d302ca7d883abb /drivers/net | |
parent | b2ffec46ea230acac52170dd0a747526328d25fe (diff) | |
download | linux-fsl-qoriq-2e756560a8a47ce754b852d0bc1ff7549433d0eb.tar.xz |
brcm80211: smac: change from pci device driver to bcma device driver
A new bus driver called "bcma" has been introduced into the kernel tree
which considers the Broadcom AMBA chip interconnect as a bus. Each core in
the chip is a bcma device. This commit changes brcms_mac80211.c into
a bcma device driver.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/wireless/brcm80211/Kconfig | 3 | ||||
-rw-r--r-- | drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c | 168 | ||||
-rw-r--r-- | drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.h | 2 |
3 files changed, 64 insertions, 109 deletions
diff --git a/drivers/net/wireless/brcm80211/Kconfig b/drivers/net/wireless/brcm80211/Kconfig index 2069fc8..8f54c2e 100644 --- a/drivers/net/wireless/brcm80211/Kconfig +++ b/drivers/net/wireless/brcm80211/Kconfig @@ -3,9 +3,8 @@ config BRCMUTIL config BRCMSMAC tristate "Broadcom IEEE802.11n PCIe SoftMAC WLAN driver" - depends on PCI depends on MAC80211 - depends on BCMA=n + depends on BCMA select BRCMUTIL select FW_LOADER select CRC_CCITT diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index 76376eb..9e07dc4 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -17,11 +17,11 @@ #define __UNDEF_NO_VERSION__ #include <linux/etherdevice.h> -#include <linux/pci.h> #include <linux/sched.h> #include <linux/firmware.h> #include <linux/interrupt.h> #include <linux/module.h> +#include <linux/bcma/bcma.h> #include <net/mac80211.h> #include <defs.h> #include "nicpci.h" @@ -87,16 +87,14 @@ MODULE_DESCRIPTION("Broadcom 802.11n wireless LAN driver."); MODULE_SUPPORTED_DEVICE("Broadcom 802.11n WLAN cards"); MODULE_LICENSE("Dual BSD/GPL"); -/* recognized PCI IDs */ -static DEFINE_PCI_DEVICE_TABLE(brcms_pci_id_table) = { - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) }, /* 43225 2G */ - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) }, /* 43224 DUAL */ - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, /* 4313 DUAL */ - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) }, /* 43224 Ven */ - {0} -}; -MODULE_DEVICE_TABLE(pci, brcms_pci_id_table); +/* recognized BCMA Core IDs */ +static struct bcma_device_id brcms_coreid_table[] = { + BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, + BCMA_ANY_REV, BCMA_ANY_CLASS), + BCMA_CORETABLE_END +}; +MODULE_DEVICE_TABLE(bcma, brcms_coreid_table); #ifdef BCMDBG static int msglevel = 0xdeadbeef; @@ -724,7 +722,7 @@ static const struct ieee80211_ops brcms_ops = { }; /* - * is called in brcms_pci_probe() context, therefore no locking required. + * is called in brcms_bcma_probe() context, therefore no locking required. */ static int brcms_set_hint(struct brcms_info *wl, char *abbrev) { @@ -864,25 +862,15 @@ static void brcms_free(struct brcms_info *wl) #endif kfree(t); } - - /* - * unregister_netdev() calls get_stats() which may read chip - * registers so we cannot unmap the chip registers until - * after calling unregister_netdev() . - */ - if (wl->regsva) - iounmap(wl->regsva); - - wl->regsva = NULL; } /* * called from both kernel as from this kernel module (error flow on attach) * precondition: perimeter lock is not acquired. */ -static void brcms_remove(struct pci_dev *pdev) +static void brcms_remove(struct bcma_device *pdev) { - struct ieee80211_hw *hw = pci_get_drvdata(pdev); + struct ieee80211_hw *hw = bcma_get_drvdata(pdev); struct brcms_info *wl = hw->priv; if (wl->wlc) { @@ -890,11 +878,10 @@ static void brcms_remove(struct pci_dev *pdev) wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy); ieee80211_unregister_hw(hw); } - pci_disable_device(pdev); brcms_free(wl); - pci_set_drvdata(pdev, NULL); + bcma_set_drvdata(pdev, NULL); ieee80211_free_hw(hw); } @@ -1002,11 +989,9 @@ static int ieee_hw_init(struct ieee80211_hw *hw) * it as static. * * - * is called in brcms_pci_probe() context, therefore no locking required. + * is called in brcms_bcma_probe() context, therefore no locking required. */ -static struct brcms_info *brcms_attach(u16 vendor, u16 device, - resource_size_t regs, - struct pci_dev *btparam, uint irq) +static struct brcms_info *brcms_attach(struct bcma_device *pdev) { struct brcms_info *wl = NULL; int unit, err; @@ -1020,7 +1005,7 @@ static struct brcms_info *brcms_attach(u16 vendor, u16 device, return NULL; /* allocate private info */ - hw = pci_get_drvdata(btparam); /* btparam == pdev */ + hw = bcma_get_drvdata(pdev); if (hw != NULL) wl = hw->priv; if (WARN_ON(hw == NULL) || WARN_ON(wl == NULL)) @@ -1032,26 +1017,22 @@ static struct brcms_info *brcms_attach(u16 vendor, u16 device, /* setup the bottom half handler */ tasklet_init(&wl->tasklet, brcms_dpc, (unsigned long) wl); - wl->regsva = ioremap_nocache(regs, PCI_BAR0_WINSZ); - if (wl->regsva == NULL) { - wiphy_err(wl->wiphy, "wl%d: ioremap() failed\n", unit); - goto fail; - } spin_lock_init(&wl->lock); spin_lock_init(&wl->isr_lock); /* prepare ucode */ - if (brcms_request_fw(wl, btparam) < 0) { + if (brcms_request_fw(wl, pdev->bus->host_pci) < 0) { wiphy_err(wl->wiphy, "%s: Failed to find firmware usually in " "%s\n", KBUILD_MODNAME, "/lib/firmware/brcm"); brcms_release_fw(wl); - brcms_remove(btparam); + brcms_remove(pdev); return NULL; } /* common load-time initialization */ - wl->wlc = brcms_c_attach(wl, vendor, device, unit, false, - wl->regsva, btparam, &err); + wl->wlc = brcms_c_attach((void *)wl, pdev->bus->host_pci->vendor, + pdev->bus->host_pci->device, unit, false, + pdev->bus->mmio, pdev->bus->host_pci, &err); brcms_release_fw(wl); if (!wl->wlc) { wiphy_err(wl->wiphy, "%s: attach() failed with code %d\n", @@ -1063,11 +1044,12 @@ static struct brcms_info *brcms_attach(u16 vendor, u16 device, wl->pub->ieee_hw = hw; /* register our interrupt handler */ - if (request_irq(irq, brcms_isr, IRQF_SHARED, KBUILD_MODNAME, wl)) { + if (request_irq(pdev->bus->host_pci->irq, brcms_isr, + IRQF_SHARED, KBUILD_MODNAME, wl)) { wiphy_err(wl->wiphy, "wl%d: request_irq() failed\n", unit); goto fail; } - wl->irq = irq; + wl->irq = pdev->bus->host_pci->irq; /* register module */ brcms_c_module_register(wl->pub, "linux", wl, NULL); @@ -1114,37 +1096,18 @@ fail: * * Perimeter lock is initialized in the course of this function. */ -static int __devinit -brcms_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +static int __devinit brcms_bcma_probe(struct bcma_device *pdev) { - int rc; struct brcms_info *wl; struct ieee80211_hw *hw; - u32 val; - - dev_info(&pdev->dev, "bus %d slot %d func %d irq %d\n", - pdev->bus->number, PCI_SLOT(pdev->devfn), - PCI_FUNC(pdev->devfn), pdev->irq); - if ((pdev->vendor != PCI_VENDOR_ID_BROADCOM) || - ((pdev->device != 0x0576) && - ((pdev->device & 0xff00) != 0x4300) && - ((pdev->device & 0xff00) != 0x4700) && - ((pdev->device < 43000) || (pdev->device > 43999)))) - return -ENODEV; + dev_info(&pdev->dev, "mfg %x core %x rev %d class %d irq %d\n", + pdev->id.manuf, pdev->id.id, pdev->id.rev, pdev->id.class, + pdev->bus->host_pci->irq); - rc = pci_enable_device(pdev); - if (rc) { - pr_err("%s: Cannot enable device %d-%d_%d\n", - __func__, pdev->bus->number, PCI_SLOT(pdev->devfn), - PCI_FUNC(pdev->devfn)); + if ((pdev->id.manuf != BCMA_MANUF_BCM) || + (pdev->id.id != BCMA_CORE_80211)) return -ENODEV; - } - pci_set_master(pdev); - - pci_read_config_dword(pdev, 0x40, &val); - if ((val & 0x0000ff00) != 0) - pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); hw = ieee80211_alloc_hw(sizeof(struct brcms_info), &brcms_ops); if (!hw) { @@ -1154,14 +1117,11 @@ brcms_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) SET_IEEE80211_DEV(hw, &pdev->dev); - pci_set_drvdata(pdev, hw); + bcma_set_drvdata(pdev, hw); memset(hw->priv, 0, sizeof(*wl)); - wl = brcms_attach(pdev->vendor, pdev->device, - pci_resource_start(pdev, 0), pdev, - pdev->irq); - + wl = brcms_attach(pdev); if (!wl) { pr_err("%s: %s: brcms_attach failed!\n", KBUILD_MODNAME, __func__); @@ -1170,16 +1130,23 @@ brcms_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return 0; } -static int brcms_suspend(struct pci_dev *pdev, pm_message_t state) +static int brcms_pci_suspend(struct pci_dev *pdev) +{ + pci_save_state(pdev); + pci_disable_device(pdev); + return pci_set_power_state(pdev, PCI_D3hot); +} + +static int brcms_suspend(struct bcma_device *pdev, pm_message_t state) { struct brcms_info *wl; struct ieee80211_hw *hw; - hw = pci_get_drvdata(pdev); + hw = bcma_get_drvdata(pdev); wl = hw->priv; if (!wl) { wiphy_err(wl->wiphy, - "brcms_suspend: pci_get_drvdata failed\n"); + "brcms_suspend: bcma_get_drvdata failed\n"); return -ENODEV; } @@ -1188,25 +1155,14 @@ static int brcms_suspend(struct pci_dev *pdev, pm_message_t state) wl->pub->hw_up = false; spin_unlock_bh(&wl->lock); - pci_save_state(pdev); - pci_disable_device(pdev); - return pci_set_power_state(pdev, PCI_D3hot); + /* temporarily do suspend ourselves */ + return brcms_pci_suspend(pdev->bus->host_pci); } -static int brcms_resume(struct pci_dev *pdev) +static int brcms_pci_resume(struct pci_dev *pdev) { - struct brcms_info *wl; - struct ieee80211_hw *hw; int err = 0; - u32 val; - - hw = pci_get_drvdata(pdev); - wl = hw->priv; - if (!wl) { - wiphy_err(wl->wiphy, - "wl: brcms_resume: pci_get_drvdata failed\n"); - return -ENODEV; - } + uint val; err = pci_set_power_state(pdev, PCI_D0); if (err) @@ -1224,24 +1180,28 @@ static int brcms_resume(struct pci_dev *pdev) if ((val & 0x0000ff00) != 0) pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); + return 0; +} + +static int brcms_resume(struct bcma_device *pdev) +{ /* - * done. driver will be put in up state - * in brcms_ops_add_interface() call. + * just do pci resume for now until bcma supports it. */ - return err; + return brcms_pci_resume(pdev->bus->host_pci); } -static struct pci_driver brcms_pci_driver = { +static struct bcma_driver brcms_bcma_driver = { .name = KBUILD_MODNAME, - .probe = brcms_pci_probe, + .probe = brcms_bcma_probe, .suspend = brcms_suspend, .resume = brcms_resume, .remove = __devexit_p(brcms_remove), - .id_table = brcms_pci_id_table, + .id_table = brcms_coreid_table, }; /** - * This is the main entry point for the WL driver. + * This is the main entry point for the brcmsmac driver. * * This function determines if a device pointed to by pdev is a WL device, * and if so, performs a brcms_attach() on it. @@ -1256,26 +1216,24 @@ static int __init brcms_module_init(void) brcm_msg_level = msglevel; #endif /* BCMDBG */ - error = pci_register_driver(&brcms_pci_driver); + error = bcma_driver_register(&brcms_bcma_driver); + printk(KERN_ERR "%s: register returned %d\n", __func__, error); if (!error) return 0; - - return error; } /** - * This function unloads the WL driver from the system. + * This function unloads the brcmsmac driver from the system. * - * This function unconditionally unloads the WL driver module from the + * This function unconditionally unloads the brcmsmac driver module from the * system. * */ static void __exit brcms_module_exit(void) { - pci_unregister_driver(&brcms_pci_driver); - + bcma_driver_unregister(&brcms_bcma_driver); } module_init(brcms_module_init); @@ -1562,7 +1520,7 @@ fail: } /* - * Precondition: Since this function is called in brcms_pci_probe() context, + * Precondition: Since this function is called in brcms_bcma_probe() context, * no locking is required. */ int brcms_ucode_init_uint(struct brcms_info *wl, size_t *n_bytes, u32 idx) @@ -1602,7 +1560,7 @@ void brcms_ucode_free_buf(void *p) /* * checks validity of all firmware images loaded from user space * - * Precondition: Since this function is called in brcms_pci_probe() context, + * Precondition: Since this function is called in brcms_bcma_probe() context, * no locking is required. */ int brcms_check_firmwares(struct brcms_info *wl) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.h b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.h index 6242f18..8f60419 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.h +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.h @@ -68,8 +68,6 @@ struct brcms_info { spinlock_t lock; /* per-device perimeter lock */ spinlock_t isr_lock; /* per-device ISR synchronization lock */ - /* regsva for unmap in brcms_free() */ - void __iomem *regsva; /* opaque chip registers virtual address */ /* timer related fields */ atomic_t callbacks; /* # outstanding callback functions */ |