Merge branch 'master' of git+ssh://galak@master.kernel.org/pub/scm/linux/kernel/git/galak/powerpc

21 files changed, 575 insertions, 238 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 47c72a6..e45a8f9 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2020,8 +2020,8 @@ config SIS190
 	  will be called sis190.  This is recommended.
 
 config SKGE
-	tristate "New SysKonnect GigaEthernet support (EXPERIMENTAL)"
-	depends on PCI && EXPERIMENTAL
+	tristate "New SysKonnect GigaEthernet support"
+	depends on PCI
 	select CRC32
 	---help---
 	  This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx
@@ -2082,7 +2082,6 @@ config SK98LIN
 	    - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter
 	    - Allied Telesyn AT-2971T Gigabit Ethernet Adapter
 	    - Belkin Gigabit Desktop Card 10/100/1000Base-T Adapter, Copper RJ-45
-	    - DGE-530T Gigabit Ethernet Adapter
 	    - EG1032 v2 Instant Gigabit Network Adapter
 	    - EG1064 v2 Instant Gigabit Network Adapter
 	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Abit)
diff --git a/drivers/net/appletalk/cops.h b/drivers/net/appletalk/cops.h
index c68ba9c..fd2750b 100644
--- a/drivers/net/appletalk/cops.h
+++ b/drivers/net/appletalk/cops.h
@@ -51,7 +51,7 @@
 struct ltfirmware
 {
         unsigned int length;
-        unsigned char * data;
+        const unsigned char *data;
 };
 
 #define DAYNA 1
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index e0f51af..bcf9f17 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1581,6 +1581,7 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
 		printk(KERN_INFO DRV_NAME
 		       ": %s: %s not enslaved\n",
 		       bond_dev->name, slave_dev->name);
+		write_unlock_bh(&bond->lock);
 		return -EINVAL;
 	}
 
diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c
index 1b69925..31fb2d7 100644
--- a/drivers/net/ifb.c
+++ b/drivers/net/ifb.c
@@ -57,7 +57,7 @@ struct ifb_private {
 	struct sk_buff_head     tq;
 };
 
-static int numifbs = 1;
+static int numifbs = 2;
 
 static void ri_tasklet(unsigned long dev);
 static int ifb_xmit(struct sk_buff *skb, struct net_device *dev);
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index fa176ff..8936058 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -108,6 +108,7 @@ static void irda_usb_close(struct irda_usb_cb *self);
 static void speed_bulk_callback(struct urb *urb, struct pt_regs *regs);
 static void write_bulk_callback(struct urb *urb, struct pt_regs *regs);
 static void irda_usb_receive(struct urb *urb, struct pt_regs *regs);
+static void irda_usb_rx_defer_expired(unsigned long data);
 static int irda_usb_net_open(struct net_device *dev);
 static int irda_usb_net_close(struct net_device *dev);
 static int irda_usb_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
@@ -677,6 +678,12 @@ static void irda_usb_net_timeout(struct net_device *netdev)
  * on the interrupt pipe and hang the Rx URB only when an interrupt is
  * received.
  * Jean II
+ *
+ * Note : don't read the above as what we are currently doing, but as
+ * something we could do with KC dongle. Also don't forget that the
+ * interrupt pipe is not part of the original standard, so this would
+ * need to be optional...
+ * Jean II
  */
 
 /*------------------------------------------------------------------*/
@@ -704,10 +711,8 @@ static void irda_usb_submit(struct irda_usb_cb *self, struct sk_buff *skb, struc
 	/* Reinitialize URB */
 	usb_fill_bulk_urb(urb, self->usbdev, 
 		      usb_rcvbulkpipe(self->usbdev, self->bulk_in_ep), 
-		      skb->data, skb->truesize,
+		      skb->data, IRDA_SKB_MAX_MTU,
                       irda_usb_receive, skb);
-	/* Note : unlink *must* be synchronous because of the code in 
-	 * irda_usb_net_close() -> free the skb - Jean II */
 	urb->status = 0;
 
 	/* Can be called from irda_usb_receive (irq handler) -> GFP_ATOMIC */
@@ -734,6 +739,7 @@ static void irda_usb_receive(struct urb *urb, struct pt_regs *regs)
 	struct irda_skb_cb *cb;
 	struct sk_buff *newskb;
 	struct sk_buff *dataskb;
+	struct urb *next_urb;
 	int		docopy;
 
 	IRDA_DEBUG(2, "%s(), len=%d\n", __FUNCTION__, urb->actual_length);
@@ -755,20 +761,37 @@ static void irda_usb_receive(struct urb *urb, struct pt_regs *regs)
 	if (urb->status != 0) {
 		switch (urb->status) {
 		case -EILSEQ:
-			self->stats.rx_errors++;
 			self->stats.rx_crc_errors++;	
-			break;
+			/* Also precursor to a hot-unplug on UHCI. */
+			/* Fallthrough... */
 		case -ECONNRESET:		/* -104 */
-			IRDA_DEBUG(0, "%s(), Connection Reset (-104), transfer_flags 0x%04X \n", __FUNCTION__, urb->transfer_flags);
+			/* Random error, if I remember correctly */
 			/* uhci_cleanup_unlink() is going to kill the Rx
 			 * URB just after we return. No problem, at this
 			 * point the URB will be idle ;-) - Jean II */
-			break;
+		case -ESHUTDOWN:		/* -108 */
+			/* That's usually a hot-unplug. Submit will fail... */
+		case -ETIMEDOUT:		/* -110 */
+			/* Usually precursor to a hot-unplug on OHCI. */
 		default:
-			IRDA_DEBUG(0, "%s(), RX status %d,transfer_flags 0x%04X \n", __FUNCTION__, urb->status, urb->transfer_flags);
+			self->stats.rx_errors++;
+			IRDA_DEBUG(0, "%s(), RX status %d, transfer_flags 0x%04X \n", __FUNCTION__, urb->status, urb->transfer_flags);
 			break;
 		}
-		goto done;
+		/* If we received an error, we don't want to resubmit the
+		 * Rx URB straight away but to give the USB layer a little
+		 * bit of breathing room.
+		 * We are in the USB thread context, therefore there is a
+		 * danger of recursion (new URB we submit fails, we come
+		 * back here).
+		 * With recent USB stack (2.6.15+), I'm seeing that on
+		 * hot unplug of the dongle...
+		 * Lowest effective timer is 10ms...
+		 * Jean II */
+		self->rx_defer_timer.function = &irda_usb_rx_defer_expired;
+		self->rx_defer_timer.data = (unsigned long) urb;
+		mod_timer(&self->rx_defer_timer, jiffies + (10 * HZ / 1000));
+		return;
 	}
 	
 	/* Check for empty frames */
@@ -845,13 +868,45 @@ done:
 	 * idle slot....
 	 * Jean II */
 	/* Note : with this scheme, we could submit the idle URB before
-	 * processing the Rx URB. Another time... Jean II */
+	 * processing the Rx URB. I don't think it would buy us anything as
+	 * we are running in the USB thread context. Jean II */
+	next_urb = self->idle_rx_urb;
 
-	/* Submit the idle URB to replace the URB we've just received */
-	irda_usb_submit(self, skb, self->idle_rx_urb);
 	/* Recycle Rx URB : Now, the idle URB is the present one */
 	urb->context = NULL;
 	self->idle_rx_urb = urb;
+
+	/* Submit the idle URB to replace the URB we've just received.
+	 * Do it last to avoid race conditions... Jean II */
+	irda_usb_submit(self, skb, next_urb);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * In case of errors, we want the USB layer to have time to recover.
+ * Now, it is time to resubmit ouur Rx URB...
+ */
+static void irda_usb_rx_defer_expired(unsigned long data)
+{
+	struct urb *urb = (struct urb *) data;
+	struct sk_buff *skb = (struct sk_buff *) urb->context;
+	struct irda_usb_cb *self; 
+	struct irda_skb_cb *cb;
+	struct urb *next_urb;
+
+	IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+	/* Find ourselves */
+	cb = (struct irda_skb_cb *) skb->cb;
+	IRDA_ASSERT(cb != NULL, return;);
+	self = (struct irda_usb_cb *) cb->context;
+	IRDA_ASSERT(self != NULL, return;);
+
+	/* Same stuff as when Rx is done, see above... */
+	next_urb = self->idle_rx_urb;
+	urb->context = NULL;
+	self->idle_rx_urb = urb;
+	irda_usb_submit(self, skb, next_urb);
 }
 
 /*------------------------------------------------------------------*/
@@ -990,6 +1045,9 @@ static int irda_usb_net_close(struct net_device *netdev)
 	/* Stop network Tx queue */
 	netif_stop_queue(netdev);
 
+	/* Kill defered Rx URB */
+	del_timer(&self->rx_defer_timer);
+
 	/* Deallocate all the Rx path buffers (URBs and skb) */
 	for (i = 0; i < IU_MAX_RX_URBS; i++) {
 		struct urb *urb = self->rx_urb[i];
@@ -1365,6 +1423,7 @@ static int irda_usb_probe(struct usb_interface *intf,
 	self = net->priv;
 	self->netdev = net;
 	spin_lock_init(&self->lock);
+	init_timer(&self->rx_defer_timer);
 
 	/* Create all of the needed urbs */
 	for (i = 0; i < IU_MAX_RX_URBS; i++) {
@@ -1498,6 +1557,9 @@ static void irda_usb_disconnect(struct usb_interface *intf)
 	 * This will stop/desactivate the Tx path. - Jean II */
 	self->present = 0;
 
+	/* Kill defered Rx URB */
+	del_timer(&self->rx_defer_timer);
+
 	/* We need to have irq enabled to unlink the URBs. That's OK,
 	 * at this point the Tx path is gone - Jean II */
 	spin_unlock_irqrestore(&self->lock, flags);
@@ -1507,11 +1569,11 @@ static void irda_usb_disconnect(struct usb_interface *intf)
 		/* Accept no more transmissions */
 		/*netif_device_detach(self->netdev);*/
 		netif_stop_queue(self->netdev);
-		/* Stop all the receive URBs */
+		/* Stop all the receive URBs. Must be synchronous. */
 		for (i = 0; i < IU_MAX_RX_URBS; i++)
 			usb_kill_urb(self->rx_urb[i]);
 		/* Cancel Tx and speed URB.
-		 * Toggle flags to make sure it's synchronous. */
+		 * Make sure it's synchronous to avoid races. */
 		usb_kill_urb(self->tx_urb);
 		usb_kill_urb(self->speed_urb);
 	}
diff --git a/drivers/net/irda/irda-usb.h b/drivers/net/irda/irda-usb.h
index bd8f665..4026af4 100644
--- a/drivers/net/irda/irda-usb.h
+++ b/drivers/net/irda/irda-usb.h
@@ -136,8 +136,6 @@ struct irda_usb_cb {
 	__u16 bulk_out_mtu;		/* Max Tx packet size in bytes */
 	__u8  bulk_int_ep;		/* Interrupt Endpoint assignments */
 
-	wait_queue_head_t wait_q;	/* for timeouts */
-
 	struct urb *rx_urb[IU_MAX_RX_URBS];	/* URBs used to receive data frames */
 	struct urb *idle_rx_urb;	/* Pointer to idle URB in Rx path */
 	struct urb *tx_urb;		/* URB used to send data frames */
@@ -147,17 +145,18 @@ struct irda_usb_cb {
 	struct net_device_stats stats;
 	struct irlap_cb   *irlap;	/* The link layer we are binded to */
 	struct qos_info qos;
-	hashbin_t *tx_list;		/* Queued transmit skb's */
 	char *speed_buff;		/* Buffer for speed changes */
 
 	struct timeval stamp;
 	struct timeval now;
 
-	spinlock_t lock;		/* For serializing operations */
+	spinlock_t lock;		/* For serializing Tx operations */
 
 	__u16 xbofs;			/* Current xbofs setting */
 	__s16 new_xbofs;		/* xbofs we need to set */
 	__u32 speed;			/* Current speed */
 	__s32 new_speed;		/* speed we need to set */
+
+	struct timer_list rx_defer_timer;	/* Wait for Rx error to clear */
 };
 
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 6e10184..8cc0d0b 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -287,6 +287,20 @@ enum RTL8169_register_content {
 	TxInterFrameGapShift = 24,
 	TxDMAShift = 8,	/* DMA burst value (0-7) is shift this many bits */
 
+	/* Config1 register p.24 */
+	PMEnable	= (1 << 0),	/* Power Management Enable */
+
+	/* Config3 register p.25 */
+	MagicPacket	= (1 << 5),	/* Wake up when receives a Magic Packet */
+	LinkUp		= (1 << 4),	/* Wake up when the cable connection is re-established */
+
+	/* Config5 register p.27 */
+	BWF		= (1 << 6),	/* Accept Broadcast wakeup frame */
+	MWF		= (1 << 5),	/* Accept Multicast wakeup frame */
+	UWF		= (1 << 4),	/* Accept Unicast wakeup frame */
+	LanWake		= (1 << 1),	/* LanWake enable/disable */
+	PMEStatus	= (1 << 0),	/* PME status can be reset by PCI RST# */
+
 	/* TBICSR p.28 */
 	TBIReset	= 0x80000000,
 	TBILoopback	= 0x40000000,
@@ -433,6 +447,7 @@ struct rtl8169_private {
 	unsigned int (*phy_reset_pending)(void __iomem *);
 	unsigned int (*link_ok)(void __iomem *);
 	struct work_struct task;
+	unsigned wol_enabled : 1;
 };
 
 MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@vger.kernel.org>");
@@ -607,6 +622,80 @@ static void rtl8169_link_option(int idx, u8 *autoneg, u16 *speed, u8 *duplex)
 	*duplex = p->duplex;
 }
 
+static void rtl8169_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct rtl8169_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	u8 options;
+
+	wol->wolopts = 0;
+
+#define WAKE_ANY (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_BCAST | WAKE_MCAST)
+	wol->supported = WAKE_ANY;
+
+	spin_lock_irq(&tp->lock);
+
+	options = RTL_R8(Config1);
+	if (!(options & PMEnable))
+		goto out_unlock;
+
+	options = RTL_R8(Config3);
+	if (options & LinkUp)
+		wol->wolopts |= WAKE_PHY;
+	if (options & MagicPacket)
+		wol->wolopts |= WAKE_MAGIC;
+
+	options = RTL_R8(Config5);
+	if (options & UWF)
+		wol->wolopts |= WAKE_UCAST;
+	if (options & BWF)
+	        wol->wolopts |= WAKE_BCAST;
+	if (options & MWF)
+	        wol->wolopts |= WAKE_MCAST;
+
+out_unlock:
+	spin_unlock_irq(&tp->lock);
+}
+
+static int rtl8169_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct rtl8169_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	int i;
+	static struct {
+		u32 opt;
+		u16 reg;
+		u8  mask;
+	} cfg[] = {
+		{ WAKE_ANY,   Config1, PMEnable },
+		{ WAKE_PHY,   Config3, LinkUp },
+		{ WAKE_MAGIC, Config3, MagicPacket },
+		{ WAKE_UCAST, Config5, UWF },
+		{ WAKE_BCAST, Config5, BWF },
+		{ WAKE_MCAST, Config5, MWF },
+		{ WAKE_ANY,   Config5, LanWake }
+	};
+
+	spin_lock_irq(&tp->lock);
+
+	RTL_W8(Cfg9346, Cfg9346_Unlock);
+
+	for (i = 0; i < ARRAY_SIZE(cfg); i++) {
+		u8 options = RTL_R8(cfg[i].reg) & ~cfg[i].mask;
+		if (wol->wolopts & cfg[i].opt)
+			options |= cfg[i].mask;
+		RTL_W8(cfg[i].reg, options);
+	}
+
+	RTL_W8(Cfg9346, Cfg9346_Lock);
+
+	tp->wol_enabled = (wol->wolopts) ? 1 : 0;
+
+	spin_unlock_irq(&tp->lock);
+
+	return 0;
+}
+
 static void rtl8169_get_drvinfo(struct net_device *dev,
 				struct ethtool_drvinfo *info)
 {
@@ -1025,6 +1114,8 @@ static struct ethtool_ops rtl8169_ethtool_ops = {
 	.get_tso		= ethtool_op_get_tso,
 	.set_tso		= ethtool_op_set_tso,
 	.get_regs		= rtl8169_get_regs,
+	.get_wol		= rtl8169_get_wol,
+	.set_wol		= rtl8169_set_wol,
 	.get_strings		= rtl8169_get_strings,
 	.get_stats_count	= rtl8169_get_stats_count,
 	.get_ethtool_stats	= rtl8169_get_ethtool_stats,
@@ -1442,6 +1533,11 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out,
 	}
 	tp->chipset = i;
 
+	RTL_W8(Cfg9346, Cfg9346_Unlock);
+	RTL_W8(Config1, RTL_R8(Config1) | PMEnable);
+	RTL_W8(Config5, RTL_R8(Config5) & PMEStatus);
+	RTL_W8(Cfg9346, Cfg9346_Lock);
+
 	*ioaddr_out = ioaddr;
 	*dev_out = dev;
 out:
@@ -1612,49 +1708,6 @@ rtl8169_remove_one(struct pci_dev *pdev)
 	pci_set_drvdata(pdev, NULL);
 }
 
-#ifdef CONFIG_PM
-
-static int rtl8169_suspend(struct pci_dev *pdev, pm_message_t state)
-{
-	struct net_device *dev = pci_get_drvdata(pdev);
-	struct rtl8169_private *tp = netdev_priv(dev);
-	void __iomem *ioaddr = tp->mmio_addr;
-	unsigned long flags;
-
-	if (!netif_running(dev))
-		return 0;
-	
-	netif_device_detach(dev);
-	netif_stop_queue(dev);
-	spin_lock_irqsave(&tp->lock, flags);
-
-	/* Disable interrupts, stop Rx and Tx */
-	RTL_W16(IntrMask, 0);
-	RTL_W8(ChipCmd, 0);
-		
-	/* Update the error counts. */
-	tp->stats.rx_missed_errors += RTL_R32(RxMissed);
-	RTL_W32(RxMissed, 0);
-	spin_unlock_irqrestore(&tp->lock, flags);
-	
-	return 0;
-}
-
-static int rtl8169_resume(struct pci_dev *pdev)
-{
-	struct net_device *dev = pci_get_drvdata(pdev);
-
-	if (!netif_running(dev))
-	    return 0;
-
-	netif_device_attach(dev);
-	rtl8169_hw_start(dev);
-
-	return 0;
-}
-                                                                                
-#endif /* CONFIG_PM */
-
 static void rtl8169_set_rxbufsize(struct rtl8169_private *tp,
 				  struct net_device *dev)
 {
@@ -2700,6 +2753,56 @@ static struct net_device_stats *rtl8169_get_stats(struct net_device *dev)
 	return &tp->stats;
 }
 
+#ifdef CONFIG_PM
+
+static int rtl8169_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct rtl8169_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+
+	if (!netif_running(dev))
+		goto out;
+
+	netif_device_detach(dev);
+	netif_stop_queue(dev);
+
+	spin_lock_irq(&tp->lock);
+
+	rtl8169_asic_down(ioaddr);
+
+	tp->stats.rx_missed_errors += RTL_R32(RxMissed);
+	RTL_W32(RxMissed, 0);
+
+	spin_unlock_irq(&tp->lock);
+
+	pci_save_state(pdev);
+	pci_enable_wake(pdev, pci_choose_state(pdev, state), tp->wol_enabled);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+out:
+	return 0;
+}
+
+static int rtl8169_resume(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+
+	if (!netif_running(dev))
+		goto out;
+
+	netif_device_attach(dev);
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	pci_enable_wake(pdev, PCI_D0, 0);
+
+	rtl8169_schedule_work(dev, rtl8169_reset_task);
+out:
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
 static struct pci_driver rtl8169_pci_driver = {
 	.name		= MODULENAME,
 	.id_table	= rtl8169_pci_tbl,
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index b420182..ed4bc91 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -1791,6 +1791,8 @@ static int __devinit sis190_init_one(struct pci_dev *pdev,
 		goto out;
 	}
 
+	pci_set_drvdata(pdev, dev);
+
 	tp = netdev_priv(dev);
 	ioaddr = tp->mmio_addr;
 
@@ -1827,8 +1829,6 @@ static int __devinit sis190_init_one(struct pci_dev *pdev,
 	if (rc < 0)
 		goto err_remove_mii;
 
-	pci_set_drvdata(pdev, dev);
-
 	net_probe(tp, KERN_INFO "%s: %s at %p (IRQ: %d), "
 	       "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n",
 	       pci_name(pdev), sis_chip_info[ent->driver_data].name,
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 3d95fa2..7a952fe 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -540,7 +540,7 @@ static int __devinit sis900_probe(struct pci_dev *pci_dev,
 	printk("%2.2x.\n", net_dev->dev_addr[i]);
 
 	/* Detect Wake on Lan support */
-	ret = inl(CFGPMC & PMESP);
+	ret = (inl(net_dev->base_addr + CFGPMC) & PMESP) >> 27;
 	if (netif_msg_probe(sis_priv) && (ret & PME_D3C) == 0)
 		printk(KERN_INFO "%s: Wake on LAN only available from suspend to RAM.", net_dev->name);
 
@@ -2040,7 +2040,7 @@ static int sis900_set_wol(struct net_device *net_dev, struct ethtool_wolinfo *wo
 
 	if (wol->wolopts == 0) {
 		pci_read_config_dword(sis_priv->pci_dev, CFGPMCSR, &cfgpmcsr);
-		cfgpmcsr |= ~PME_EN;
+		cfgpmcsr &= ~PME_EN;
 		pci_write_config_dword(sis_priv->pci_dev, CFGPMCSR, cfgpmcsr);
 		outl(pmctrl_bits, pmctrl_addr);
 		if (netif_msg_wol(sis_priv))
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index bf55a4c..25e028b 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -879,13 +879,12 @@ static int __xm_phy_read(struct skge_hw *hw, int port, u16 reg, u16 *val)
 	int i;
 
 	xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr);
-	xm_read16(hw, port, XM_PHY_DATA);
+	*val = xm_read16(hw, port, XM_PHY_DATA);
 
-	/* Need to wait for external PHY */
 	for (i = 0; i < PHY_RETRIES; i++) {
-		udelay(1);
 		if (xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_RDY)
 			goto ready;
+		udelay(1);
 	}
 
 	return -ETIMEDOUT;
@@ -918,7 +917,12 @@ static int xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val)
 
  ready:
 	xm_write16(hw, port, XM_PHY_DATA, val);
-	return 0;
+	for (i = 0; i < PHY_RETRIES; i++) {
+		if (!(xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY))
+			return 0;
+		udelay(1);
+	}
+	return -ETIMEDOUT;
 }
 
 static void genesis_init(struct skge_hw *hw)
@@ -1168,13 +1172,17 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
 	u32 r;
 	const u8 zero[6]  = { 0 };
 
-	/* Clear MIB counters */
-	xm_write16(hw, port, XM_STAT_CMD,
-			XM_SC_CLR_RXC | XM_SC_CLR_TXC);
-	/* Clear two times according to Errata #3 */
-	xm_write16(hw, port, XM_STAT_CMD,
-			XM_SC_CLR_RXC | XM_SC_CLR_TXC);
+	for (i = 0; i < 10; i++) {
+		skge_write16(hw, SK_REG(port, TX_MFF_CTRL1),
+			     MFF_SET_MAC_RST);
+		if (skge_read16(hw, SK_REG(port, TX_MFF_CTRL1)) & MFF_SET_MAC_RST)
+			goto reset_ok;
+		udelay(1);
+	}
 
+	printk(KERN_WARNING PFX "%s: genesis reset failed\n", dev->name);
+
+ reset_ok:
 	/* Unreset the XMAC. */
 	skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_CLR_MAC_RST);
 
@@ -1191,7 +1199,7 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
 		r |= GP_DIR_2|GP_IO_2;
 
 	skge_write32(hw, B2_GP_IO, r);
-	skge_read32(hw, B2_GP_IO);
+
 
 	/* Enable GMII interface */
 	xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD);
@@ -1205,6 +1213,13 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
 	for (i = 1; i < 16; i++)
 		xm_outaddr(hw, port, XM_EXM(i), zero);
 
+	/* Clear MIB counters */
+	xm_write16(hw, port, XM_STAT_CMD,
+			XM_SC_CLR_RXC | XM_SC_CLR_TXC);
+	/* Clear two times according to Errata #3 */
+	xm_write16(hw, port, XM_STAT_CMD,
+			XM_SC_CLR_RXC | XM_SC_CLR_TXC);
+
 	/* configure Rx High Water Mark (XM_RX_HI_WM) */
 	xm_write16(hw, port, XM_RX_HI_WM, 1450);
 
@@ -1697,6 +1712,7 @@ static void yukon_mac_init(struct skge_hw *hw, int port)
 	skge_write32(hw, SK_REG(port, GPHY_CTRL), reg | GPC_RST_SET);
 	skge_write32(hw, SK_REG(port, GPHY_CTRL), reg | GPC_RST_CLR);
 	skge_write32(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON | GMC_RST_CLR);
+
 	if (skge->autoneg == AUTONEG_DISABLE) {
 		reg = GM_GPCR_AU_ALL_DIS;
 		gma_write16(hw, port, GM_GP_CTRL,
@@ -1704,16 +1720,23 @@ static void yukon_mac_init(struct skge_hw *hw, int port)
 
 		switch (skge->speed) {
 		case SPEED_1000:
+			reg &= ~GM_GPCR_SPEED_100;
 			reg |= GM_GPCR_SPEED_1000;
-			/* fallthru */
+			break;
 		case SPEED_100:
+			reg &= ~GM_GPCR_SPEED_1000;
 			reg |= GM_GPCR_SPEED_100;
+			break;
+		case SPEED_10:
+			reg &= ~(GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100);
+			break;
 		}
 
 		if (skge->duplex == DUPLEX_FULL)
 			reg |= GM_GPCR_DUP_FULL;
 	} else
 		reg = GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100 | GM_GPCR_DUP_FULL;
+
 	switch (skge->flow_control) {
 	case FLOW_MODE_NONE:
 		skge_write32(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
@@ -2162,8 +2185,10 @@ static int skge_up(struct net_device *dev)
 	skge->tx_avail = skge->tx_ring.count - 1;
 
 	/* Enable IRQ from port */
+	spin_lock_irq(&hw->hw_lock);
 	hw->intr_mask |= portirqmask[port];
 	skge_write32(hw, B0_IMSK, hw->intr_mask);
+	spin_unlock_irq(&hw->hw_lock);
 
 	/* Initialize MAC */
 	spin_lock_bh(&hw->phy_lock);
@@ -2221,8 +2246,10 @@ static int skge_down(struct net_device *dev)
 	else
 		yukon_stop(skge);
 
+	spin_lock_irq(&hw->hw_lock);
 	hw->intr_mask &= ~portirqmask[skge->port];
 	skge_write32(hw, B0_IMSK, hw->intr_mask);
+	spin_unlock_irq(&hw->hw_lock);
 
 	/* Stop transmitter */
 	skge_write8(hw, Q_ADDR(txqaddr[port], Q_CSR), CSR_STOP);
@@ -2670,8 +2697,7 @@ static int skge_poll(struct net_device *dev, int *budget)
 
 	/* restart receiver */
 	wmb();
-	skge_write8(hw, Q_ADDR(rxqaddr[skge->port], Q_CSR),
-		    CSR_START | CSR_IRQ_CL_F);
+	skge_write8(hw, Q_ADDR(rxqaddr[skge->port], Q_CSR), CSR_START);
 
 	*budget -= work_done;
 	dev->quota -= work_done;
@@ -2679,10 +2705,11 @@ static int skge_poll(struct net_device *dev, int *budget)
 	if (work_done >=  to_do)
 		return 1; /* not done */
 
-	netif_rx_complete(dev);
-	hw->intr_mask |= portirqmask[skge->port];
-	skge_write32(hw, B0_IMSK, hw->intr_mask);
-	skge_read32(hw, B0_IMSK);
+	spin_lock_irq(&hw->hw_lock);
+	__netif_rx_complete(dev);
+  	hw->intr_mask |= portirqmask[skge->port];
+  	skge_write32(hw, B0_IMSK, hw->intr_mask);
+ 	spin_unlock_irq(&hw->hw_lock);
 
 	return 0;
 }
@@ -2842,18 +2869,10 @@ static void skge_extirq(unsigned long data)
 	}
 	spin_unlock(&hw->phy_lock);
 
-	local_irq_disable();
+	spin_lock_irq(&hw->hw_lock);
 	hw->intr_mask |= IS_EXT_REG;
 	skge_write32(hw, B0_IMSK, hw->intr_mask);
-	local_irq_enable();
-}
-
-static inline void skge_wakeup(struct net_device *dev)
-{
-	struct skge_port *skge = netdev_priv(dev);
-
-	prefetch(skge->rx_ring.to_clean);
-	netif_rx_schedule(dev);
+	spin_unlock_irq(&hw->hw_lock);
 }
 
 static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs)
@@ -2864,15 +2883,17 @@ static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs)
 	if (status == 0 || status == ~0) /* hotplug or shared irq */
 		return IRQ_NONE;
 
-	status &= hw->intr_mask;
+	spin_lock(&hw->hw_lock);
 	if (status & IS_R1_F) {
+		skge_write8(hw, Q_ADDR(Q_R1, Q_CSR), CSR_IRQ_CL_F);
 		hw->intr_mask &= ~IS_R1_F;
-		skge_wakeup(hw->dev[0]);
+		netif_rx_schedule(hw->dev[0]);
 	}
 
 	if (status & IS_R2_F) {
+		skge_write8(hw, Q_ADDR(Q_R2, Q_CSR), CSR_IRQ_CL_F);
 		hw->intr_mask &= ~IS_R2_F;
-		skge_wakeup(hw->dev[1]);
+		netif_rx_schedule(hw->dev[1]);
 	}
 
 	if (status & IS_XA1_F)
@@ -2914,6 +2935,7 @@ static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs)
 	}
 
 	skge_write32(hw, B0_IMSK, hw->intr_mask);
+	spin_unlock(&hw->hw_lock);
 
 	return IRQ_HANDLED;
 }
@@ -3282,6 +3304,7 @@ static int __devinit skge_probe(struct pci_dev *pdev,
 
 	hw->pdev = pdev;
 	spin_lock_init(&hw->phy_lock);
+	spin_lock_init(&hw->hw_lock);
 	tasklet_init(&hw->ext_tasklet, skge_extirq, (unsigned long) hw);
 
 	hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
diff --git a/drivers/net/skge.h b/drivers/net/skge.h
index 2efdacc..941f12a 100644
--- a/drivers/net/skge.h
+++ b/drivers/net/skge.h
@@ -2402,6 +2402,7 @@ struct skge_hw {
 
 	struct tasklet_struct ext_tasklet;
 	spinlock_t	     phy_lock;
+	spinlock_t	     hw_lock;
 };
 
 enum {
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index cae2edf..ca8160d 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -195,11 +195,11 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
 	pr_debug("sky2_set_power_state %d\n", state);
 	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 
-	pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_PMC, &power_control);
+	power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_PMC);
 	vaux = (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL) &&
 		(power_control & PCI_PM_CAP_PME_D3cold);
 
-	pci_read_config_word(hw->pdev, hw->pm_cap + PCI_PM_CTRL, &power_control);
+	power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_CTRL);
 
 	power_control |= PCI_PM_CTRL_PME_STATUS;
 	power_control &= ~(PCI_PM_CTRL_STATE_MASK);
@@ -223,7 +223,7 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
 			sky2_write8(hw, B2_Y2_CLK_GATE, 0);
 
 		/* Turn off phy power saving */
-		pci_read_config_dword(hw->pdev, PCI_DEV_REG1, &reg1);
+		reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
 		reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
 
 		/* looks like this XL is back asswards .. */
@@ -232,18 +232,28 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
 			if (hw->ports > 1)
 				reg1 |= PCI_Y2_PHY2_COMA;
 		}
-		pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1);
+
+		if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+			sky2_pci_write32(hw, PCI_DEV_REG3, 0);
+			reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
+			reg1 &= P_ASPM_CONTROL_MSK;
+			sky2_pci_write32(hw, PCI_DEV_REG4, reg1);
+			sky2_pci_write32(hw, PCI_DEV_REG5, 0);
+		}
+
+		sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+
 		break;
 
 	case PCI_D3hot:
 	case PCI_D3cold:
 		/* Turn on phy power saving */
-		pci_read_config_dword(hw->pdev, PCI_DEV_REG1, &reg1);
+		reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
 		if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
 			reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
 		else
 			reg1 |= (PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
-		pci_write_config_dword(hw->pdev, PCI_DEV_REG1, reg1);
+		sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
 
 		if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
 			sky2_write8(hw, B2_Y2_CLK_GATE, 0);
@@ -265,7 +275,7 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
 		ret = -1;
 	}
 
-	pci_write_config_byte(hw->pdev, hw->pm_cap + PCI_PM_CTRL, power_control);
+	sky2_pci_write16(hw, hw->pm_cap + PCI_PM_CTRL, power_control);
 	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 	return ret;
 }
@@ -463,16 +473,31 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 		ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
 	}
 
-	gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
+	if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev >= 2) {
+		/* apply fixes in PHY AFE */
+		gm_phy_write(hw, port, 22, 255);
+		/* increase differential signal amplitude in 10BASE-T */
+		gm_phy_write(hw, port, 24, 0xaa99);
+		gm_phy_write(hw, port, 23, 0x2011);
 
-	if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
-		/* turn on 100 Mbps LED (LED_LINK100) */
-		ledover |= PHY_M_LED_MO_100(MO_LED_ON);
-	}
+		/* fix for IEEE A/B Symmetry failure in 1000BASE-T */
+		gm_phy_write(hw, port, 24, 0xa204);
+		gm_phy_write(hw, port, 23, 0x2002);
 
-	if (ledover)
-		gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
+		/* set page register to 0 */
+		gm_phy_write(hw, port, 22, 0);
+	} else {
+		gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
+
+		if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
+			/* turn on 100 Mbps LED (LED_LINK100) */
+			ledover |= PHY_M_LED_MO_100(MO_LED_ON);
+		}
+
+		if (ledover)
+			gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
 
+	}
 	/* Enable phy interrupt on auto-negotiation complete (or link up) */
 	if (sky2->autoneg == AUTONEG_ENABLE)
 		gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
@@ -520,10 +545,16 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
 
 		switch (sky2->speed) {
 		case SPEED_1000:
+			reg &= ~GM_GPCR_SPEED_100;
 			reg |= GM_GPCR_SPEED_1000;
-			/* fallthru */
+			break;
 		case SPEED_100:
+			reg &= ~GM_GPCR_SPEED_1000;
 			reg |= GM_GPCR_SPEED_100;
+			break;
+		case SPEED_10:
+			reg &= ~(GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100);
+			break;
 		}
 
 		if (sky2->duplex == DUPLEX_FULL)
@@ -947,6 +978,12 @@ static int sky2_rx_start(struct sky2_port *sky2)
 
 	sky2->rx_put = sky2->rx_next = 0;
 	sky2_qset(hw, rxq);
+
+	if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev >= 2) {
+		/* MAC Rx RAM Read is controlled by hardware */
+		sky2_write32(hw, Q_ADDR(rxq, Q_F), F_M_RX_RAM_DIS);
+	}
+
 	sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
 
 	rx_set_checksum(sky2);
@@ -1029,9 +1066,10 @@ static int sky2_up(struct net_device *dev)
 		    RB_RST_SET);
 
 	sky2_qset(hw, txqaddr[port]);
-	if (hw->chip_id == CHIP_ID_YUKON_EC_U)
-		sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0);
 
+	/* Set almost empty threshold */
+	if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == 1)
+		sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0);
 
 	sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
 			   TX_RING_SIZE - 1);
@@ -1041,8 +1079,10 @@ static int sky2_up(struct net_device *dev)
 		goto err_out;
 
 	/* Enable interrupts from phy/mac for port */
+	spin_lock_irq(&hw->hw_lock);
 	hw->intr_mask |= (port == 0) ? Y2_IS_PORT_1 : Y2_IS_PORT_2;
 	sky2_write32(hw, B0_IMSK, hw->intr_mask);
+	spin_unlock_irq(&hw->hw_lock);
 	return 0;
 
 err_out:
@@ -1342,10 +1382,10 @@ static int sky2_down(struct net_device *dev)
 	netif_stop_queue(dev);
 
 	/* Disable port IRQ */
-	local_irq_disable();
+	spin_lock_irq(&hw->hw_lock);
 	hw->intr_mask &= ~((sky2->port == 0) ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2);
 	sky2_write32(hw, B0_IMSK, hw->intr_mask);
-	local_irq_enable();
+	spin_unlock_irq(&hw->hw_lock);
 
 	flush_scheduled_work();
 
@@ -1446,6 +1486,29 @@ static void sky2_link_up(struct sky2_port *sky2)
 	sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), GMAC_DEF_MSK);
 
 	reg = gma_read16(hw, port, GM_GP_CTRL);
+	if (sky2->autoneg == AUTONEG_DISABLE) {
+		reg |= GM_GPCR_AU_ALL_DIS;
+
+		/* Is write/read necessary?  Copied from sky2_mac_init */
+		gma_write16(hw, port, GM_GP_CTRL, reg);
+		gma_read16(hw, port, GM_GP_CTRL);
+
+		switch (sky2->speed) {
+		case SPEED_1000:
+			reg &= ~GM_GPCR_SPEED_100;
+			reg |= GM_GPCR_SPEED_1000;
+			break;
+		case SPEED_100:
+			reg &= ~GM_GPCR_SPEED_1000;
+			reg |= GM_GPCR_SPEED_100;
+			break;
+		case SPEED_10:
+			reg &= ~(GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100);
+			break;
+		}
+	} else
+		reg &= ~GM_GPCR_AU_ALL_DIS;
+
 	if (sky2->duplex == DUPLEX_FULL || sky2->autoneg == AUTONEG_ENABLE)
 		reg |= GM_GPCR_DUP_FULL;
 
@@ -1604,10 +1667,10 @@ static void sky2_phy_task(void *arg)
 out:
 	up(&sky2->phy_sema);
 
-	local_irq_disable();
+	spin_lock_irq(&hw->hw_lock);
 	hw->intr_mask |= (sky2->port == 0) ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2;
 	sky2_write32(hw, B0_IMSK, hw->intr_mask);
-	local_irq_enable();
+	spin_unlock_irq(&hw->hw_lock);
 }
 
 
@@ -1834,6 +1897,17 @@ static int sky2_poll(struct net_device *dev0, int *budget)
 
 	sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
 
+	/*
+	 * Kick the STAT_LEV_TIMER_CTRL timer.
+	 * This fixes my hangs on Yukon-EC (0xb6) rev 1.
+	 * The if clause is there to start the timer only if it has been
+	 * configured correctly and not been disabled via ethtool.
+	 */
+	if (sky2_read8(hw, STAT_LEV_TIMER_CTRL) == TIM_START) {
+		sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_STOP);
+		sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
+	}
+
 	hwidx = sky2_read16(hw, STAT_PUT_IDX);
 	BUG_ON(hwidx >= STATUS_RING_SIZE);
 	rmb();
@@ -1916,16 +1990,19 @@ exit_loop:
 	sky2_tx_check(hw, 0, tx_done[0]);
 	sky2_tx_check(hw, 1, tx_done[1]);
 
+	if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_START) {
+		sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
+		sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
+	}
+
 	if (likely(work_done < to_do)) {
-		/* need to restart TX timer */
-		if (is_ec_a1(hw)) {
-			sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
-			sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
-		}
+		spin_lock_irq(&hw->hw_lock);
+		__netif_rx_complete(dev0);
 
-		netif_rx_complete(dev0);
 		hw->intr_mask |= Y2_IS_STAT_BMU;
 		sky2_write32(hw, B0_IMSK, hw->intr_mask);
+		spin_unlock_irq(&hw->hw_lock);
+
 		return 0;
 	} else {
 		*budget -= work_done;
@@ -1988,13 +2065,13 @@ static void sky2_hw_intr(struct sky2_hw *hw)
 	if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
 		u16 pci_err;
 
-		pci_read_config_word(hw->pdev, PCI_STATUS, &pci_err);
+		pci_err = sky2_pci_read16(hw, PCI_STATUS);
 		if (net_ratelimit())
 			printk(KERN_ERR PFX "%s: pci hw error (0x%x)\n",
 			       pci_name(hw->pdev), pci_err);
 
 		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-		pci_write_config_word(hw->pdev, PCI_STATUS,
+		sky2_pci_write16(hw, PCI_STATUS,
 				      pci_err | PCI_STATUS_ERROR_BITS);
 		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 	}
@@ -2003,7 +2080,7 @@ static void sky2_hw_intr(struct sky2_hw *hw)
 		/* PCI-Express uncorrectable Error occurred */
 		u32 pex_err;
 
-		pci_read_config_dword(hw->pdev, PEX_UNC_ERR_STAT, &pex_err);
+		pex_err = sky2_pci_read32(hw, PEX_UNC_ERR_STAT);
 
 		if (net_ratelimit())
 			printk(KERN_ERR PFX "%s: pci express error (0x%x)\n",
@@ -2011,7 +2088,7 @@ static void sky2_hw_intr(struct sky2_hw *hw)
 
 		/* clear the interrupt */
 		sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-		pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT,
+		sky2_pci_write32(hw, PEX_UNC_ERR_STAT,
 				       0xffffffffUL);
 		sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 
@@ -2057,6 +2134,7 @@ static void sky2_phy_intr(struct sky2_hw *hw, unsigned port)
 
 	hw->intr_mask &= ~(port == 0 ? Y2_IS_IRQ_PHY1 : Y2_IS_IRQ_PHY2);
 	sky2_write32(hw, B0_IMSK, hw->intr_mask);
+
 	schedule_work(&sky2->phy_task);
 }
 
@@ -2070,6 +2148,7 @@ static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs)
 	if (status == 0 || status == ~0)
 		return IRQ_NONE;
 
+	spin_lock(&hw->hw_lock);
 	if (status & Y2_IS_HW_ERR)
 		sky2_hw_intr(hw);
 
@@ -2098,7 +2177,7 @@ static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs)
 
 	sky2_write32(hw, B0_Y2_SP_ICR, 2);
 
-	sky2_read32(hw, B0_IMSK);
+	spin_unlock(&hw->hw_lock);
 
 	return IRQ_HANDLED;
 }
@@ -2141,7 +2220,7 @@ static int sky2_reset(struct sky2_hw *hw)
 {
 	u16 status;
 	u8 t8, pmd_type;
-	int i, err;
+	int i;
 
 	sky2_write8(hw, B0_CTST, CS_RST_CLR);
 
@@ -2163,25 +2242,18 @@ static int sky2_reset(struct sky2_hw *hw)
 	sky2_write8(hw, B0_CTST, CS_RST_CLR);
 
 	/* clear PCI errors, if any */
-	err = pci_read_config_word(hw->pdev, PCI_STATUS, &status);
-	if (err)
-		goto pci_err;
+	status = sky2_pci_read16(hw, PCI_STATUS);
 
 	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-	err = pci_write_config_word(hw->pdev, PCI_STATUS,
-				    status | PCI_STATUS_ERROR_BITS);
-	if (err)
-		goto pci_err;
+	sky2_pci_write16(hw, PCI_STATUS, status | PCI_STATUS_ERROR_BITS);
+
 
 	sky2_write8(hw, B0_CTST, CS_MRST_CLR);
 
 	/* clear any PEX errors */
-	if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP)) {
-		err = pci_write_config_dword(hw->pdev, PEX_UNC_ERR_STAT,
-						 0xffffffffUL);
-		if (err)
-			goto pci_err;
-	}
+	if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP)) 
+		sky2_pci_write32(hw, PEX_UNC_ERR_STAT, 0xffffffffUL);
+
 
 	pmd_type = sky2_read8(hw, B2_PMD_TYP);
 	hw->copper = !(pmd_type == 'L' || pmd_type == 'S');
@@ -2280,8 +2352,7 @@ static int sky2_reset(struct sky2_hw *hw)
 			sky2_write8(hw, STAT_FIFO_ISR_WM, 16);
 
 		sky2_write32(hw, STAT_TX_TIMER_INI, sky2_us2clk(hw, 1000));
-		sky2_write32(hw, STAT_LEV_TIMER_INI, sky2_us2clk(hw, 100));
-		sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 20));
+		sky2_write32(hw, STAT_ISR_TIMER_INI, sky2_us2clk(hw, 7));
 	}
 
 	/* enable status unit */
@@ -2292,14 +2363,6 @@ static int sky2_reset(struct sky2_hw *hw)
 	sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
 
 	return 0;
-
-pci_err:
-	/* This is to catch a BIOS bug workaround where
-	 * mmconfig table doesn't have other buses.
-	 */
-	printk(KERN_ERR PFX "%s: can't access PCI config space\n",
-	       pci_name(hw->pdev));
-	return err;
 }
 
 static u32 sky2_supported_modes(const struct sky2_hw *hw)
@@ -2823,11 +2886,11 @@ static int sky2_set_coalesce(struct net_device *dev,
 	    (ecmd->rx_coalesce_usecs_irq < tmin || ecmd->rx_coalesce_usecs_irq > tmax))
 		return -EINVAL;
 
-	if (ecmd->tx_max_coalesced_frames > 0xffff)
+	if (ecmd->tx_max_coalesced_frames >= TX_RING_SIZE-1)
 		return -EINVAL;
-	if (ecmd->rx_max_coalesced_frames > 0xff)
+	if (ecmd->rx_max_coalesced_frames > RX_MAX_PENDING)
 		return -EINVAL;
-	if (ecmd->rx_max_coalesced_frames_irq > 0xff)
+	if (ecmd->rx_max_coalesced_frames_irq >RX_MAX_PENDING)
 		return -EINVAL;
 
 	if (ecmd->tx_coalesce_usecs == 0)
@@ -3169,17 +3232,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 		}
 	}
 
-#ifdef __BIG_ENDIAN
-	/* byte swap descriptors in hardware */
-	{
-		u32 reg;
-
-		pci_read_config_dword(pdev, PCI_DEV_REG2, &reg);
-		reg |= PCI_REV_DESC;
-		pci_write_config_dword(pdev, PCI_DEV_REG2, reg);
-	}
-#endif
-
 	err = -ENOMEM;
 	hw = kzalloc(sizeof(*hw), GFP_KERNEL);
 	if (!hw) {
@@ -3197,6 +3249,18 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 		goto err_out_free_hw;
 	}
 	hw->pm_cap = pm_cap;
+	spin_lock_init(&hw->hw_lock);
+
+#ifdef __BIG_ENDIAN
+	/* byte swap descriptors in hardware */
+	{
+		u32 reg;
+
+		reg = sky2_pci_read32(hw, PCI_DEV_REG2);
+		reg |= PCI_REV_DESC;
+		sky2_pci_write32(hw, PCI_DEV_REG2, reg);
+	}
+#endif
 
 	/* ring for status responses */
 	hw->st_le = pci_alloc_consistent(hw->pdev, STATUS_LE_BYTES,
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index fd12c28..3edb980 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -5,14 +5,22 @@
 #define _SKY2_H
 
 /* PCI config registers */
-#define PCI_DEV_REG1	0x40
-#define PCI_DEV_REG2	0x44
-#define PCI_DEV_STATUS  0x7c
-#define PCI_OS_PCI_X    (1<<26)
+enum {
+	PCI_DEV_REG1	= 0x40,
+	PCI_DEV_REG2	= 0x44,
+	PCI_DEV_STATUS  = 0x7c,
+	PCI_DEV_REG3	= 0x80,
+	PCI_DEV_REG4	= 0x84,
+	PCI_DEV_REG5    = 0x88,
+};
 
-#define PEX_LNK_STAT	0xf2
-#define PEX_UNC_ERR_STAT 0x104
-#define PEX_DEV_CTRL	0xe8
+enum {
+	PEX_DEV_CAP	= 0xe4,
+	PEX_DEV_CTRL	= 0xe8,
+	PEX_DEV_STA	= 0xea,
+	PEX_LNK_STAT	= 0xf2,
+	PEX_UNC_ERR_STAT= 0x104,
+};
 
 /* Yukon-2 */
 enum pci_dev_reg_1 {
@@ -37,6 +45,25 @@ enum pci_dev_reg_2 {
 	PCI_USEDATA64	= 1<<0,		/* Use 64Bit Data bus ext */
 };
 
+/*	PCI_OUR_REG_4		32 bit	Our Register 4 (Yukon-ECU only) */
+enum pci_dev_reg_4 {
+					/* (Link Training & Status State Machine) */
+	P_TIMER_VALUE_MSK	= 0xffL<<16,	/* Bit 23..16:	Timer Value Mask */
+					/* (Active State Power Management) */
+	P_FORCE_ASPM_REQUEST	= 1<<15, /* Force ASPM Request (A1 only) */
+	P_ASPM_GPHY_LINK_DOWN	= 1<<14, /* GPHY Link Down (A1 only) */
+	P_ASPM_INT_FIFO_EMPTY	= 1<<13, /* Internal FIFO Empty (A1 only) */
+	P_ASPM_CLKRUN_REQUEST	= 1<<12, /* CLKRUN Request (A1 only) */
+
+	P_ASPM_FORCE_CLKREQ_ENA	= 1<<4,	/* Force CLKREQ Enable (A1b only) */
+	P_ASPM_CLKREQ_PAD_CTL	= 1<<3,	/* CLKREQ PAD Control (A1 only) */
+	P_ASPM_A1_MODE_SELECT	= 1<<2,	/* A1 Mode Select (A1 only) */
+	P_CLK_GATE_PEX_UNIT_ENA	= 1<<1,	/* Enable Gate PEX Unit Clock */
+	P_CLK_GATE_ROOT_COR_ENA	= 1<<0,	/* Enable Gate Root Core Clock */
+	P_ASPM_CONTROL_MSK	= P_FORCE_ASPM_REQUEST | P_ASPM_GPHY_LINK_DOWN
+				  | P_ASPM_CLKRUN_REQUEST | P_ASPM_INT_FIFO_EMPTY,
+};
+
 
 #define PCI_STATUS_ERROR_BITS (PCI_STATUS_DETECTED_PARITY | \
 			       PCI_STATUS_SIG_SYSTEM_ERROR | \
@@ -507,6 +534,16 @@ enum {
 };
 #define Q_ADDR(reg, offs) (B8_Q_REGS + (reg) + (offs))
 
+/*	Q_F				32 bit	Flag Register */
+enum {
+	F_ALM_FULL	= 1<<27, /* Rx FIFO: almost full */
+	F_EMPTY		= 1<<27, /* Tx FIFO: empty flag */
+	F_FIFO_EOF	= 1<<26, /* Tag (EOF Flag) bit in FIFO */
+	F_WM_REACHED	= 1<<25, /* Watermark reached */
+	F_M_RX_RAM_DIS	= 1<<24, /* MAC Rx RAM Read Port disable */
+	F_FIFO_LEVEL	= 0x1fL<<16, /* Bit 23..16:	# of Qwords in FIFO */
+	F_WATER_MARK	= 0x0007ffL, /* Bit 10.. 0:	Watermark */
+};
 
 /* Queue Prefetch Unit Offsets, use Y2_QADDR() to address (Yukon-2 only)*/
 enum {
@@ -909,10 +946,12 @@ enum {
 	PHY_BCOM_ID1_C0	= 0x6044,
 	PHY_BCOM_ID1_C5	= 0x6047,
 
-	PHY_MARV_ID1_B0	= 0x0C23, /* Yukon (PHY 88E1011) */
+	PHY_MARV_ID1_B0	= 0x0C23, /* Yukon 	(PHY 88E1011) */
 	PHY_MARV_ID1_B2	= 0x0C25, /* Yukon-Plus (PHY 88E1011) */
-	PHY_MARV_ID1_C2	= 0x0CC2, /* Yukon-EC (PHY 88E1111) */
-	PHY_MARV_ID1_Y2	= 0x0C91, /* Yukon-2 (PHY 88E1112) */
+	PHY_MARV_ID1_C2	= 0x0CC2, /* Yukon-EC	(PHY 88E1111) */
+	PHY_MARV_ID1_Y2	= 0x0C91, /* Yukon-2	(PHY 88E1112) */
+	PHY_MARV_ID1_FE = 0x0C83, /* Yukon-FE   (PHY 88E3082 Rev.A1) */
+	PHY_MARV_ID1_ECU= 0x0CB0, /* Yukon-ECU  (PHY 88E1149 Rev.B2?) */
 };
 
 /* Advertisement register bits */
@@ -1837,8 +1876,9 @@ struct sky2_port {
 struct sky2_hw {
 	void __iomem  	     *regs;
 	struct pci_dev	     *pdev;
-	u32		     intr_mask;
 	struct net_device    *dev[2];
+	spinlock_t	     hw_lock;
+	u32		     intr_mask;
 
 	int		     pm_cap;
 	int		     msi;
@@ -1912,4 +1952,25 @@ static inline void gma_set_addr(struct sky2_hw *hw, unsigned port, unsigned reg,
 	gma_write16(hw, port, reg+4,(u16) addr[2] | ((u16) addr[3] << 8));
 	gma_write16(hw, port, reg+8,(u16) addr[4] | ((u16) addr[5] << 8));
 }
+
+/* PCI config space access */
+static inline u32 sky2_pci_read32(const struct sky2_hw *hw, unsigned reg)
+{
+	return sky2_read32(hw, Y2_CFG_SPC + reg);
+}
+
+static inline u16 sky2_pci_read16(const struct sky2_hw *hw, unsigned reg)
+{
+	return sky2_read16(hw, Y2_CFG_SPC + reg);
+}
+
+static inline void sky2_pci_write32(struct sky2_hw *hw, unsigned reg, u32 val)
+{
+	sky2_write32(hw, Y2_CFG_SPC + reg, val);
+}
+
+static inline void sky2_pci_write16(struct sky2_hw *hw, unsigned reg, u16 val)
+{
+	sky2_write16(hw, Y2_CFG_SPC + reg, val);
+}
 #endif
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index e7dc653..e8e92c8 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -9408,6 +9408,15 @@ static int __devinit tg3_is_sun_570X(struct tg3 *tp)
 			return 0;
 		if (venid == PCI_VENDOR_ID_SUN)
 			return 1;
+
+		/* TG3 chips onboard the SunBlade-2500 don't have the
+		 * subsystem-vendor-id set to PCI_VENDOR_ID_SUN but they
+		 * are distinguishable from non-Sun variants by being
+		 * named "network" by the firmware.  Non-Sun cards will
+		 * show up as being named "ethernet".
+		 */
+		if (!strcmp(pcp->prom_name, "network"))
+			return 1;
 	}
 	return 0;
 }
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index c2506b5..12076f8 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -536,6 +536,7 @@ static int __devinit TLan_probe1(struct pci_dev *pdev,
 	u16		   device_id;
 	int		   reg, rc = -ENODEV;
 
+#ifdef CONFIG_PCI
 	if (pdev) {
 		rc = pci_enable_device(pdev);
 		if (rc)
@@ -547,6 +548,7 @@ static int __devinit TLan_probe1(struct pci_dev *pdev,
 			goto err_out;
 		}
 	}
+#endif  /*  CONFIG_PCI  */
 
 	dev = alloc_etherdev(sizeof(TLanPrivateInfo));
 	if (dev == NULL) {
diff --git a/drivers/net/tokenring/smctr.h b/drivers/net/tokenring/smctr.h
index b306c7e..88dfa2e 100644
--- a/drivers/net/tokenring/smctr.h
+++ b/drivers/net/tokenring/smctr.h
@@ -1042,7 +1042,7 @@ typedef struct net_local {
         __u16            functional_address[2];
         __u16            bitwise_group_address[2];
 
-	__u8            *ptr_ucode;
+	const __u8       *ptr_ucode;
 
 	__u8		cleanup;
 
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 233a4f6..ef85d76 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -148,7 +148,7 @@ config IPW2100
 	  In order to use this driver, you will need a firmware image for it.
           You can obtain the firmware from
 	  <http://ipw2100.sf.net/>.  Once you have the firmware image, you 
-	  will need to place it in /etc/firmware.
+	  will need to place it in /lib/firmware.
 
           You will also very likely need the Wireless Tools in order to
           configure your card:
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index 98a76f1..dfc2401 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -1872,7 +1872,7 @@ static int atmel_set_encodeext(struct net_device *dev,
 	struct atmel_private *priv = netdev_priv(dev);
 	struct iw_point *encoding = &wrqu->encoding;
 	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
-	int idx, key_len;
+	int idx, key_len, alg = ext->alg, set_key = 1;
 
 	/* Determine and validate the key index */
 	idx = encoding->flags & IW_ENCODE_INDEX;
@@ -1883,39 +1883,42 @@ static int atmel_set_encodeext(struct net_device *dev,
 	} else
 		idx = priv->default_key;
 
-	if ((encoding->flags & IW_ENCODE_DISABLED) ||
-	    ext->alg == IW_ENCODE_ALG_NONE) {
-		priv->wep_is_on = 0;
-		priv->encryption_level = 0;
-		priv->pairwise_cipher_suite = CIPHER_SUITE_NONE;
-	}
+	if (encoding->flags & IW_ENCODE_DISABLED)
+	    alg = IW_ENCODE_ALG_NONE;
 
-	if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)
+	if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
 		priv->default_key = idx;
+		set_key = ext->key_len > 0 ? 1 : 0;
+	}
 
-	/* Set the requested key */
-	switch (ext->alg) {
-	case IW_ENCODE_ALG_NONE:
-		break;
-	case IW_ENCODE_ALG_WEP:
-		if (ext->key_len > 5) {
-			priv->wep_key_len[idx] = 13;
-			priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_128;
-			priv->encryption_level = 2;
-		} else if (ext->key_len > 0) {
-			priv->wep_key_len[idx] = 5;
-			priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_64;
-			priv->encryption_level = 1;
-		} else {
+	if (set_key) {
+		/* Set the requested key first */
+		switch (alg) {
+		case IW_ENCODE_ALG_NONE:
+			priv->wep_is_on = 0;
+			priv->encryption_level = 0;
+			priv->pairwise_cipher_suite = CIPHER_SUITE_NONE;
+			break;
+		case IW_ENCODE_ALG_WEP:
+			if (ext->key_len > 5) {
+				priv->wep_key_len[idx] = 13;
+				priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_128;
+				priv->encryption_level = 2;
+			} else if (ext->key_len > 0) {
+				priv->wep_key_len[idx] = 5;
+				priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_64;
+				priv->encryption_level = 1;
+			} else {
+				return -EINVAL;
+			}
+			priv->wep_is_on = 1;
+			memset(priv->wep_keys[idx], 0, 13);
+			key_len = min ((int)ext->key_len, priv->wep_key_len[idx]);
+			memcpy(priv->wep_keys[idx], ext->key, key_len);
+			break;
+		default:
 			return -EINVAL;
 		}
-		priv->wep_is_on = 1;
-		memset(priv->wep_keys[idx], 0, 13);
-		key_len = min ((int)ext->key_len, priv->wep_key_len[idx]);
-		memcpy(priv->wep_keys[idx], ext->key, key_len);
-		break;
-	default:
-		return -EINVAL;
 	}
 
 	return -EINPROGRESS;
@@ -3061,17 +3064,26 @@ static void authenticate(struct atmel_private *priv, u16 frame_len)
 	}
 
 	if (status == C80211_MGMT_SC_Success && priv->wep_is_on) {
+		int should_associate = 0;
 		/* WEP */
 		if (trans_seq_no != priv->ExpectedAuthentTransactionSeqNum)
 			return;
 
-		if (trans_seq_no == 0x0002 &&
-		    auth->el_id == C80211_MGMT_ElementID_ChallengeText) {
-			send_authentication_request(priv, system, auth->chall_text, auth->chall_text_len);
-			return;
+		if (system == C80211_MGMT_AAN_OPENSYSTEM) {
+			if (trans_seq_no == 0x0002) {
+				should_associate = 1;
+			}
+		} else if (system == C80211_MGMT_AAN_SHAREDKEY) {
+			if (trans_seq_no == 0x0002 &&
+			    auth->el_id == C80211_MGMT_ElementID_ChallengeText) {
+				send_authentication_request(priv, system, auth->chall_text, auth->chall_text_len);
+				return;
+			} else if (trans_seq_no == 0x0004) {
+				should_associate = 1;
+			}
 		}
 
-		if (trans_seq_no == 0x0004) {
+		if (should_associate) {
 			if(priv->station_was_associated) {
 				atmel_enter_state(priv, STATION_STATE_REASSOCIATING);
 				send_association_request(priv, 1);
@@ -3084,11 +3096,13 @@ static void authenticate(struct atmel_private *priv, u16 frame_len)
 		}
 	}
 
-	if (status == C80211_MGMT_SC_AuthAlgNotSupported) {
+	if (status == WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG) {
 		/* Do opensystem first, then try sharedkey */
-		if (system ==  C80211_MGMT_AAN_OPENSYSTEM) {
+		if (system == WLAN_AUTH_OPEN) {
 			priv->CurrentAuthentTransactionSeqNum = 0x001;
-			send_authentication_request(priv, C80211_MGMT_AAN_SHAREDKEY, NULL, 0);
+			priv->exclude_unencrypted = 1;
+			send_authentication_request(priv, WLAN_AUTH_SHARED_KEY, NULL, 0);
+			return;
 		} else if (priv->connect_to_any_BSS) {
 			int bss_index;
 
@@ -3439,10 +3453,13 @@ static void atmel_management_timer(u_long a)
 			priv->AuthenticationRequestRetryCnt = 0;
 			restart_search(priv);
 		} else {
+			int auth = C80211_MGMT_AAN_OPENSYSTEM;
 			priv->AuthenticationRequestRetryCnt++;
 			priv->CurrentAuthentTransactionSeqNum = 0x0001;
 			mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
-			send_authentication_request(priv, C80211_MGMT_AAN_OPENSYSTEM, NULL, 0);
+			if (priv->wep_is_on && priv->exclude_unencrypted)
+				auth = C80211_MGMT_AAN_SHAREDKEY;
+			send_authentication_request(priv, auth, NULL, 0);
 	  }
 	  break;
 
@@ -3541,12 +3558,15 @@ static void atmel_command_irq(struct atmel_private *priv)
 				priv->station_was_associated = priv->station_is_associated;
 				atmel_enter_state(priv, STATION_STATE_READY);
 			} else {
+				int auth = C80211_MGMT_AAN_OPENSYSTEM;
 				priv->AuthenticationRequestRetryCnt = 0;
 				atmel_enter_state(priv, STATION_STATE_AUTHENTICATING);
 
 				mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
 				priv->CurrentAuthentTransactionSeqNum = 0x0001;
-				send_authentication_request(priv, C80211_MGMT_AAN_SHAREDKEY, NULL, 0);
+				if (priv->wep_is_on && priv->exclude_unencrypted)
+					auth = C80211_MGMT_AAN_SHAREDKEY;
+				send_authentication_request(priv, auth, NULL, 0);
 			}
 			return;
 		}
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index 14beab4..287676a 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -4616,9 +4616,9 @@ static void ipw_rx_notification(struct ipw_priv *priv,
 		}
 
 	default:
-		IPW_ERROR("Unknown notification: "
-			  "subtype=%d,flags=0x%2x,size=%d\n",
-			  notif->subtype, notif->flags, notif->size);
+		IPW_DEBUG_NOTIF("Unknown notification: "
+				"subtype=%d,flags=0x%2x,size=%d\n",
+				notif->subtype, notif->flags, notif->size);
 	}
 }
 
diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c
index 3c128b6..ec6f2a4 100644
--- a/drivers/net/wireless/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco_cs.c
@@ -590,6 +590,7 @@ static struct pcmcia_device_id orinoco_cs_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
 	PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
 	PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
+	PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757),
 	PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a),
 	PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
 	PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39),
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index cf37362..98122f3 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -950,16 +950,8 @@ wv_82593_cmd(struct net_device *	dev,
 static inline int
 wv_diag(struct net_device *	dev)
 {
-  int		ret = FALSE;
-
-  if(wv_82593_cmd(dev, "wv_diag(): diagnose",
-		  OP0_DIAGNOSE, SR0_DIAGNOSE_PASSED))
-    ret = TRUE;
-
-#ifdef DEBUG_CONFIG_ERRORS
-  printk(KERN_INFO "wavelan_cs: i82593 Self Test failed!\n");
-#endif
-  return(ret);
+  return(wv_82593_cmd(dev, "wv_diag(): diagnose",
+		      OP0_DIAGNOSE, SR0_DIAGNOSE_PASSED));
 } /* wv_diag */
 
 /*------------------------------------------------------------------*/
@@ -3604,8 +3596,8 @@ wv_82593_config(struct net_device *	dev)
   cfblk.lin_prio = 0;   	/* conform to 802.3 backoff algoritm */
   cfblk.exp_prio = 5;	        /* conform to 802.3 backoff algoritm */
   cfblk.bof_met = 1;	        /* conform to 802.3 backoff algoritm */
-  cfblk.ifrm_spc = 0x20;	/* 32 bit times interframe spacing */
-  cfblk.slottim_low = 0x20;	/* 32 bit times slot time */
+  cfblk.ifrm_spc = 0x20 >> 4;	/* 32 bit times interframe spacing */
+  cfblk.slottim_low = 0x20 >> 5;	/* 32 bit times slot time */
   cfblk.slottim_hi = 0x0;
   cfblk.max_retr = 15;
   cfblk.prmisc = ((lp->promiscuous) ? TRUE: FALSE);	/* Promiscuous mode */