diff options
author | Bruce Allan <bruce.w.allan@intel.com> | 2012-04-13 03:16:22 (GMT) |
---|---|---|
committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2012-05-02 08:58:45 (GMT) |
commit | cb17aab916b0467faecf241c9b3b396b6da045d9 (patch) | |
tree | bdfb68caca112d9bc2408cd7edcf651356d16508 /drivers/net | |
parent | 62bc813e48aef39c187bb426ddd5441862f1d8d1 (diff) | |
download | linux-fsl-qoriq-cb17aab916b0467faecf241c9b3b396b6da045d9.tar.xz |
e1000e: PHY initialization flow changes for 82577/8/9
The PHY initialization flows and assorted workarounds for 82577/8/9 done
during driver load and resume from Sx should be the same yet they are not.
Combine the current flows/workarounds into a common set of functions that
are called during the different code paths.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.c | 247 |
1 files changed, 146 insertions, 101 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 2506ee2..4c8b0fb 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -287,25 +287,126 @@ static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val) #define ew16flash(reg, val) __ew16flash(hw, (reg), (val)) #define ew32flash(reg, val) __ew32flash(hw, (reg), (val)) -static void e1000_toggle_lanphypc_value_ich8lan(struct e1000_hw *hw) +/** + * e1000_phy_is_accessible_pchlan - Check if able to access PHY registers + * @hw: pointer to the HW structure + * + * Test access to the PHY registers by reading the PHY ID registers. If + * the PHY ID is already known (e.g. resume path) compare it with known ID, + * otherwise assume the read PHY ID is correct if it is valid. + * + * Assumes the sw/fw/hw semaphore is already acquired. + **/ +static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw) { - u32 reg; + u16 phy_reg; + u32 phy_id; - /* Set Phy Config Counter to 50msec */ - reg = er32(FEXTNVM3); - reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK; - reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC; - ew32(FEXTNVM3, reg); - - /* Toggle LANPHYPC Value bit */ - reg = er32(CTRL); - reg |= E1000_CTRL_LANPHYPC_OVERRIDE; - reg &= ~E1000_CTRL_LANPHYPC_VALUE; - ew32(CTRL, reg); - e1e_flush(); - udelay(10); - reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE; - ew32(CTRL, reg); + hw->phy.ops.read_reg_locked(hw, PHY_ID1, &phy_reg); + phy_id = (u32)(phy_reg << 16); + hw->phy.ops.read_reg_locked(hw, PHY_ID2, &phy_reg); + phy_id |= (u32)(phy_reg & PHY_REVISION_MASK); + + if (hw->phy.id) { + if (hw->phy.id == phy_id) + return true; + } else { + if ((phy_id != 0) && (phy_id != PHY_REVISION_MASK)) + hw->phy.id = phy_id; + return true; + } + + return false; +} + +/** + * e1000_init_phy_workarounds_pchlan - PHY initialization workarounds + * @hw: pointer to the HW structure + * + * Workarounds/flow necessary for PHY initialization during driver load + * and resume paths. + **/ +static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw) +{ + u32 mac_reg, fwsm = er32(FWSM); + s32 ret_val; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) { + e_dbg("Failed to initialize PHY flow\n"); + return ret_val; + } + + /* + * The MAC-PHY interconnect may be in SMBus mode. If the PHY is + * inaccessible and resetting the PHY is not blocked, toggle the + * LANPHYPC Value bit to force the interconnect to PCIe mode. + */ + switch (hw->mac.type) { + case e1000_pch2lan: + /* + * Gate automatic PHY configuration by hardware on + * non-managed 82579 + */ + if (!(fwsm & E1000_ICH_FWSM_FW_VALID)) + e1000_gate_hw_phy_config_ich8lan(hw, true); + + if (e1000_phy_is_accessible_pchlan(hw)) + break; + + /* fall-through */ + case e1000_pchlan: + if ((hw->mac.type == e1000_pchlan) && + (fwsm & E1000_ICH_FWSM_FW_VALID)) + break; + + if (hw->phy.ops.check_reset_block(hw)) { + e_dbg("Required LANPHYPC toggle blocked by ME\n"); + break; + } + + e_dbg("Toggling LANPHYPC\n"); + + /* Set Phy Config Counter to 50msec */ + mac_reg = er32(FEXTNVM3); + mac_reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK; + mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC; + ew32(FEXTNVM3, mac_reg); + + /* Toggle LANPHYPC Value bit */ + mac_reg = er32(CTRL); + mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE; + mac_reg &= ~E1000_CTRL_LANPHYPC_VALUE; + ew32(CTRL, mac_reg); + e1e_flush(); + udelay(10); + mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE; + ew32(CTRL, mac_reg); + e1e_flush(); + msleep(50); + break; + default: + break; + } + + hw->phy.ops.release(hw); + + /* + * Reset the PHY before any access to it. Doing so, ensures + * that the PHY is in a known good state before we read/write + * PHY registers. The generic reset is sufficient here, + * because we haven't determined the PHY type yet. + */ + ret_val = e1000e_phy_hw_reset_generic(hw); + + /* Ungate automatic PHY configuration on non-managed 82579 */ + if ((hw->mac.type == e1000_pch2lan) && + !(fwsm & E1000_ICH_FWSM_FW_VALID)) { + usleep_range(10000, 20000); + e1000_gate_hw_phy_config_ich8lan(hw, false); + } + + return ret_val; } /** @@ -335,65 +436,34 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) phy->ops.power_down = e1000_power_down_phy_copper_ich8lan; phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; - if (!hw->phy.ops.check_reset_block(hw)) { - u32 fwsm = er32(FWSM); - - /* - * The MAC-PHY interconnect may still be in SMBus mode after - * Sx->S0. If resetting the PHY is not blocked, toggle the - * LANPHYPC Value bit to force the interconnect to PCIe mode. - */ - e1000_toggle_lanphypc_value_ich8lan(hw); - msleep(50); - - /* - * Gate automatic PHY configuration by hardware on - * non-managed 82579 - */ - if ((hw->mac.type == e1000_pch2lan) && - !(fwsm & E1000_ICH_FWSM_FW_VALID)) - e1000_gate_hw_phy_config_ich8lan(hw, true); - - /* - * Reset the PHY before any access to it. Doing so, ensures - * that the PHY is in a known good state before we read/write - * PHY registers. The generic reset is sufficient here, - * because we haven't determined the PHY type yet. - */ - ret_val = e1000e_phy_hw_reset_generic(hw); - if (ret_val) - return ret_val; + phy->id = e1000_phy_unknown; - /* Ungate automatic PHY configuration on non-managed 82579 */ - if ((hw->mac.type == e1000_pch2lan) && - !(fwsm & E1000_ICH_FWSM_FW_VALID)) { - usleep_range(10000, 20000); - e1000_gate_hw_phy_config_ich8lan(hw, false); - } - } + ret_val = e1000_init_phy_workarounds_pchlan(hw); + if (ret_val) + return ret_val; - phy->id = e1000_phy_unknown; - switch (hw->mac.type) { - default: - ret_val = e1000e_get_phy_id(hw); - if (ret_val) - return ret_val; - if ((phy->id != 0) && (phy->id != PHY_REVISION_MASK)) + if (phy->id == e1000_phy_unknown) + switch (hw->mac.type) { + default: + ret_val = e1000e_get_phy_id(hw); + if (ret_val) + return ret_val; + if ((phy->id != 0) && (phy->id != PHY_REVISION_MASK)) + break; + /* fall-through */ + case e1000_pch2lan: + /* + * In case the PHY needs to be in mdio slow mode, + * set slow mode and try to get the PHY id again. + */ + ret_val = e1000_set_mdio_slow_mode_hv(hw); + if (ret_val) + return ret_val; + ret_val = e1000e_get_phy_id(hw); + if (ret_val) + return ret_val; break; - /* fall-through */ - case e1000_pch2lan: - /* - * In case the PHY needs to be in mdio slow mode, - * set slow mode and try to get the PHY id again. - */ - ret_val = e1000_set_mdio_slow_mode_hv(hw); - if (ret_val) - return ret_val; - ret_val = e1000e_get_phy_id(hw); - if (ret_val) - return ret_val; - break; - } + } phy->type = e1000e_get_phy_type_from_id(phy->id); switch (phy->type) { @@ -3736,41 +3806,16 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) **/ void e1000_resume_workarounds_pchlan(struct e1000_hw *hw) { - u16 phy_id1, phy_id2; s32 ret_val; - if ((hw->mac.type != e1000_pch2lan) || - hw->phy.ops.check_reset_block(hw)) + if (hw->mac.type < e1000_pch2lan) return; - ret_val = hw->phy.ops.acquire(hw); + ret_val = e1000_init_phy_workarounds_pchlan(hw); if (ret_val) { - e_dbg("Failed to acquire PHY semaphore in resume\n"); + e_dbg("Failed to init PHY flow ret_val=%d\n", ret_val); return; } - - /* Test access to the PHY registers by reading the ID regs */ - ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID1, &phy_id1); - if (ret_val) - goto release; - ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID2, &phy_id2); - if (ret_val) - goto release; - - if (hw->phy.id == ((u32)(phy_id1 << 16) | - (u32)(phy_id2 & PHY_REVISION_MASK))) - goto release; - - e1000_toggle_lanphypc_value_ich8lan(hw); - - hw->phy.ops.release(hw); - msleep(50); - e1000_phy_hw_reset(hw); - msleep(50); - return; - -release: - hw->phy.ops.release(hw); } /** |