diff options
author | Jeff Garzik <jeff@garzik.org> | 2006-09-19 19:27:07 (GMT) |
---|---|---|
committer | Jeff Garzik <jeff@garzik.org> | 2006-09-19 19:27:07 (GMT) |
commit | f8ec473387f70d103c83ffb3ab50cb2b1380d0c0 (patch) | |
tree | 8abcae6e3e7c4692519196c26dac4a82e65753b4 /drivers/net | |
parent | 23b6b0e3e8306ce3d00e0c87196bfaad335b9096 (diff) | |
download | linux-fsl-qoriq-f8ec473387f70d103c83ffb3ab50cb2b1380d0c0.tar.xz |
e1000, ixgb: Remove pointless wrappers
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/e1000/e1000_ethtool.c | 20 | ||||
-rw-r--r-- | drivers/net/e1000/e1000_hw.c | 94 | ||||
-rw-r--r-- | drivers/net/e1000/e1000_osdep.h | 19 | ||||
-rw-r--r-- | drivers/net/ixgb/ixgb_hw.c | 6 | ||||
-rw-r--r-- | drivers/net/ixgb/ixgb_osdep.h | 12 |
5 files changed, 60 insertions, 91 deletions
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 0759bf0..e39aa1f 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -908,7 +908,7 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) /* Disable all the interrupts */ E1000_WRITE_REG(&adapter->hw, IMC, 0xFFFFFFFF); - msec_delay(10); + msleep(10); /* Test each interrupt */ for (; i < 10; i++) { @@ -928,7 +928,7 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) adapter->test_icr = 0; E1000_WRITE_REG(&adapter->hw, IMC, mask); E1000_WRITE_REG(&adapter->hw, ICS, mask); - msec_delay(10); + msleep(10); if (adapter->test_icr & mask) { *data = 3; @@ -945,7 +945,7 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) adapter->test_icr = 0; E1000_WRITE_REG(&adapter->hw, IMS, mask); E1000_WRITE_REG(&adapter->hw, ICS, mask); - msec_delay(10); + msleep(10); if (!(adapter->test_icr & mask)) { *data = 4; @@ -962,7 +962,7 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) adapter->test_icr = 0; E1000_WRITE_REG(&adapter->hw, IMC, ~mask & 0x00007FFF); E1000_WRITE_REG(&adapter->hw, ICS, ~mask & 0x00007FFF); - msec_delay(10); + msleep(10); if (adapter->test_icr) { *data = 5; @@ -973,7 +973,7 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) /* Disable all the interrupts */ E1000_WRITE_REG(&adapter->hw, IMC, 0xFFFFFFFF); - msec_delay(10); + msleep(10); /* Unhook test interrupt handler */ free_irq(irq, netdev); @@ -1395,7 +1395,7 @@ e1000_setup_loopback_test(struct e1000_adapter *adapter) #define E1000_SERDES_LB_ON 0x410 e1000_set_phy_loopback(adapter); E1000_WRITE_REG(hw, SCTL, E1000_SERDES_LB_ON); - msec_delay(10); + msleep(10); return 0; break; default: @@ -1428,7 +1428,7 @@ e1000_loopback_cleanup(struct e1000_adapter *adapter) hw->media_type == e1000_media_type_internal_serdes) { #define E1000_SERDES_LB_OFF 0x400 E1000_WRITE_REG(hw, SCTL, E1000_SERDES_LB_OFF); - msec_delay(10); + msleep(10); break; } /* Fall Through */ @@ -1508,7 +1508,7 @@ e1000_run_loopback_test(struct e1000_adapter *adapter) if (unlikely(++k == txdr->count)) k = 0; } E1000_WRITE_REG(&adapter->hw, TDT, k); - msec_delay(200); + msleep(200); time = jiffies; /* set the start time for the receive */ good_cnt = 0; do { /* receive the sent packets */ @@ -1579,14 +1579,14 @@ e1000_link_test(struct e1000_adapter *adapter, uint64_t *data) e1000_check_for_link(&adapter->hw); if (adapter->hw.serdes_link_down == FALSE) return *data; - msec_delay(20); + msleep(20); } while (i++ < 3750); *data = 1; } else { e1000_check_for_link(&adapter->hw); if (adapter->hw.autoneg) /* if auto_neg is set wait for it */ - msec_delay(4000); + msleep(4000); if (!(E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU)) { *data = 1; diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index a6f8f4f..10b8c8c 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -223,7 +223,7 @@ e1000_phy_init_script(struct e1000_hw *hw) DEBUGFUNC("e1000_phy_init_script"); if (hw->phy_init_script) { - msec_delay(20); + msleep(20); /* Save off the current value of register 0x2F5B to be restored at * the end of this routine. */ @@ -232,11 +232,11 @@ e1000_phy_init_script(struct e1000_hw *hw) /* Disabled the PHY transmitter */ e1000_write_phy_reg(hw, 0x2F5B, 0x0003); - msec_delay(20); + msleep(20); e1000_write_phy_reg(hw,0x0000,0x0140); - msec_delay(5); + msleep(5); switch (hw->mac_type) { case e1000_82541: @@ -270,7 +270,7 @@ e1000_phy_init_script(struct e1000_hw *hw) e1000_write_phy_reg(hw, 0x0000, 0x3300); - msec_delay(20); + msleep(20); /* Now enable the transmitter */ e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data); @@ -551,14 +551,14 @@ e1000_reset_hw(struct e1000_hw *hw) /* Delay to allow any outstanding PCI transactions to complete before * resetting the device */ - msec_delay(10); + msleep(10); ctrl = E1000_READ_REG(hw, CTRL); /* Must reset the PHY before resetting the MAC */ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_PHY_RST)); - msec_delay(5); + msleep(5); } /* Must acquire the MDIO ownership before MAC reset. @@ -578,7 +578,7 @@ e1000_reset_hw(struct e1000_hw *hw) else extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; - msec_delay(2); + msleep(2); timeout--; } while (timeout); } @@ -626,7 +626,7 @@ e1000_reset_hw(struct e1000_hw *hw) e1000_get_software_flag(hw); E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_RST)); - msec_delay(5); + msleep(5); break; default: E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_RST)); @@ -649,14 +649,14 @@ e1000_reset_hw(struct e1000_hw *hw) E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); E1000_WRITE_FLUSH(hw); /* Wait for EEPROM reload */ - msec_delay(2); + msleep(2); break; case e1000_82541: case e1000_82541_rev_2: case e1000_82547: case e1000_82547_rev_2: /* Wait for EEPROM reload */ - msec_delay(20); + msleep(20); break; case e1000_82573: if (e1000_is_onboard_nvm_eeprom(hw) == FALSE) { @@ -678,7 +678,7 @@ e1000_reset_hw(struct e1000_hw *hw) break; default: /* Wait for EEPROM reload (it happens automatically) */ - msec_delay(5); + msleep(5); break; } @@ -708,7 +708,7 @@ e1000_reset_hw(struct e1000_hw *hw) /* If MWI was previously enabled, reenable it. */ if (hw->mac_type == e1000_82542_rev2_0) { - if (hw->pci_cmd_word & CMD_MEM_WRT_INVALIDATE) + if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE) e1000_pci_set_mwi(hw); } @@ -784,7 +784,7 @@ e1000_init_hw(struct e1000_hw *hw) e1000_pci_clear_mwi(hw); E1000_WRITE_REG(hw, RCTL, E1000_RCTL_RST); E1000_WRITE_FLUSH(hw); - msec_delay(5); + msleep(5); } /* Setup the receive address. This involves initializing all of the Receive @@ -796,8 +796,8 @@ e1000_init_hw(struct e1000_hw *hw) if (hw->mac_type == e1000_82542_rev2_0) { E1000_WRITE_REG(hw, RCTL, 0); E1000_WRITE_FLUSH(hw); - msec_delay(1); - if (hw->pci_cmd_word & CMD_MEM_WRT_INVALIDATE) + msleep(1); + if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE) e1000_pci_set_mwi(hw); } @@ -851,7 +851,7 @@ e1000_init_hw(struct e1000_hw *hw) /* More time needed for PHY to initialize */ if (hw->mac_type == e1000_ich8lan) - msec_delay(15); + msleep(15); /* Call a subroutine to configure the link and setup flow control. */ ret_val = e1000_setup_link(hw); @@ -1231,7 +1231,7 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) E1000_WRITE_FLUSH(hw); hw->txcw = txcw; - msec_delay(1); + msleep(1); /* If we have a signal (the cable is plugged in) then poll for a "Link-Up" * indication in the Device Status Register. Time-out if a link isn't @@ -1243,7 +1243,7 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) (E1000_READ_REG(hw, CTRL) & E1000_CTRL_SWDPIN1) == signal) { DEBUGOUT("Looking for Link\n"); for (i = 0; i < (LINK_UP_TIMEOUT / 10); i++) { - msec_delay(10); + msleep(10); status = E1000_READ_REG(hw, STATUS); if (status & E1000_STATUS_LU) break; } @@ -1355,7 +1355,7 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw) } /* Wait 15ms for MAC to configure PHY from eeprom settings */ - msec_delay(15); + msleep(15); if (hw->mac_type != e1000_ich8lan) { /* Configure activity LED after PHY reset */ led_ctrl = E1000_READ_REG(hw, LEDCTL); @@ -2334,7 +2334,7 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw) return ret_val; if (mii_status_reg & MII_SR_LINK_STATUS) break; - msec_delay(100); + msleep(100); } if ((i == 0) && ((hw->phy_type == e1000_phy_m88) || @@ -2349,7 +2349,7 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw) /* This loop will early-out if the link condition has been met. */ for (i = PHY_FORCE_TIME; i > 0; i--) { if (mii_status_reg & MII_SR_LINK_STATUS) break; - msec_delay(100); + msleep(100); /* Read the MII Status Register and wait for Auto-Neg Complete bit * to be set. */ @@ -3132,7 +3132,7 @@ e1000_wait_autoneg(struct e1000_hw *hw) if (phy_data & MII_SR_AUTONEG_COMPLETE) { return E1000_SUCCESS; } - msec_delay(100); + msleep(100); } return E1000_SUCCESS; } @@ -3306,7 +3306,7 @@ e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask) /* firmware currently using resource (fwmask) */ /* or other software thread currently using resource (swmask) */ e1000_put_hw_eeprom_semaphore(hw); - msec_delay_irq(5); + mdelay(5); timeout--; } @@ -3725,7 +3725,7 @@ e1000_phy_hw_reset(struct e1000_hw *hw) E1000_WRITE_FLUSH(hw); if (hw->mac_type < e1000_82571) - msec_delay(10); + msleep(10); else udelay(100); @@ -3733,7 +3733,7 @@ e1000_phy_hw_reset(struct e1000_hw *hw) E1000_WRITE_FLUSH(hw); if (hw->mac_type >= e1000_82571) - msec_delay_irq(10); + mdelay(10); e1000_swfw_sync_release(hw, swfw); } else { /* Read the Extended Device Control Register, assert the PHY_RESET_DIR @@ -3744,7 +3744,7 @@ e1000_phy_hw_reset(struct e1000_hw *hw) ctrl_ext &= ~E1000_CTRL_EXT_SDP4_DATA; E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); E1000_WRITE_FLUSH(hw); - msec_delay(10); + msleep(10); ctrl_ext |= E1000_CTRL_EXT_SDP4_DATA; E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); E1000_WRITE_FLUSH(hw); @@ -3917,7 +3917,7 @@ e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw) /* Issue PHY reset */ e1000_phy_hw_reset(hw); - msec_delay_irq(5); + mdelay(5); } /* Disable GigE link negotiation */ reg = E1000_READ_REG(hw, PHY_CTRL); @@ -5179,7 +5179,7 @@ e1000_update_eeprom_checksum(struct e1000_hw *hw) ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); ctrl_ext |= E1000_CTRL_EXT_EE_RST; E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); - msec_delay(10); + msleep(10); } return E1000_SUCCESS; } @@ -5230,7 +5230,7 @@ e1000_write_eeprom(struct e1000_hw *hw, status = e1000_write_eeprom_microwire(hw, offset, words, data); } else { status = e1000_write_eeprom_spi(hw, offset, words, data); - msec_delay(10); + msleep(10); } /* Done with writing */ @@ -7058,7 +7058,7 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw, if (ret_val) return ret_val; - msec_delay_irq(20); + mdelay(20); ret_val = e1000_write_phy_reg(hw, 0x0000, IGP01E1000_IEEE_FORCE_GIGA); @@ -7082,7 +7082,7 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw, if (ret_val) return ret_val; - msec_delay_irq(20); + mdelay(20); /* Now enable the transmitter */ ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data); @@ -7107,7 +7107,7 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw, if (ret_val) return ret_val; - msec_delay_irq(20); + mdelay(20); ret_val = e1000_write_phy_reg(hw, 0x0000, IGP01E1000_IEEE_FORCE_GIGA); @@ -7123,7 +7123,7 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw, if (ret_val) return ret_val; - msec_delay_irq(20); + mdelay(20); /* Now enable the transmitter */ ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data); @@ -7519,7 +7519,7 @@ e1000_mng_enable_host_if(struct e1000_hw * hw) hicr = E1000_READ_REG(hw, HICR); if (!(hicr & E1000_HICR_C)) break; - msec_delay_irq(1); + mdelay(1); } if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) { @@ -7842,26 +7842,26 @@ e1000_polarity_reversal_workaround(struct e1000_hw *hw) return ret_val; if ((mii_status_reg & ~MII_SR_LINK_STATUS) == 0) break; - msec_delay_irq(100); + mdelay(100); } /* Recommended delay time after link has been lost */ - msec_delay_irq(1000); + mdelay(1000); /* Now we will re-enable th transmitter on the PHY */ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019); if (ret_val) return ret_val; - msec_delay_irq(50); + mdelay(50); ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFF0); if (ret_val) return ret_val; - msec_delay_irq(50); + mdelay(50); ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFF00); if (ret_val) return ret_val; - msec_delay_irq(50); + mdelay(50); ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0x0000); if (ret_val) return ret_val; @@ -7885,7 +7885,7 @@ e1000_polarity_reversal_workaround(struct e1000_hw *hw) return ret_val; if (mii_status_reg & MII_SR_LINK_STATUS) break; - msec_delay_irq(100); + mdelay(100); } return E1000_SUCCESS; } @@ -7998,7 +7998,7 @@ e1000_get_auto_rd_done(struct e1000_hw *hw) switch (hw->mac_type) { default: - msec_delay(5); + msleep(5); break; case e1000_82571: case e1000_82572: @@ -8008,7 +8008,7 @@ e1000_get_auto_rd_done(struct e1000_hw *hw) while (timeout) { if (E1000_READ_REG(hw, EECD) & E1000_EECD_AUTO_RD) break; - else msec_delay(1); + else msleep(1); timeout--; } @@ -8023,7 +8023,7 @@ e1000_get_auto_rd_done(struct e1000_hw *hw) * Need to wait for PHY configuration completion before accessing NVM * and PHY. */ if (hw->mac_type == e1000_82573) - msec_delay(25); + msleep(25); return E1000_SUCCESS; } @@ -8047,7 +8047,7 @@ e1000_get_phy_cfg_done(struct e1000_hw *hw) switch (hw->mac_type) { default: - msec_delay_irq(10); + mdelay(10); break; case e1000_80003es2lan: /* Separate *_CFG_DONE_* bit for each port */ @@ -8060,7 +8060,7 @@ e1000_get_phy_cfg_done(struct e1000_hw *hw) if (E1000_READ_REG(hw, EEMNGCTL) & cfg_mask) break; else - msec_delay(1); + msleep(1); timeout--; } @@ -8180,7 +8180,7 @@ e1000_get_software_semaphore(struct e1000_hw *hw) /* If SMBI bit cleared, it is now set and we hold the semaphore */ if (!(swsm & E1000_SWSM_SMBI)) break; - msec_delay_irq(1); + mdelay(1); timeout--; } @@ -8339,7 +8339,7 @@ e1000_get_software_flag(struct e1000_hw *hw) extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL); if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG) break; - msec_delay_irq(1); + mdelay(1); timeout--; } diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/e1000/e1000_osdep.h index 2d3e8b0..46bc49d 100644 --- a/drivers/net/e1000/e1000_osdep.h +++ b/drivers/net/e1000/e1000_osdep.h @@ -42,25 +42,6 @@ #include <linux/interrupt.h> #include <linux/sched.h> -#ifndef msec_delay -#define msec_delay(x) do { if(in_interrupt()) { \ - /* Don't mdelay in interrupt context! */ \ - BUG(); \ - } else { \ - msleep(x); \ - } } while (0) - -/* Some workarounds require millisecond delays and are run during interrupt - * context. Most notably, when establishing link, the phy may need tweaking - * but cannot process phy register reads/writes faster than millisecond - * intervals...and we establish link due to a "link status change" interrupt. - */ -#define msec_delay_irq(x) mdelay(x) -#endif - -#define PCI_COMMAND_REGISTER PCI_COMMAND -#define CMD_MEM_WRT_INVALIDATE PCI_COMMAND_INVALIDATE - typedef enum { #undef FALSE FALSE = 0, diff --git a/drivers/net/ixgb/ixgb_hw.c b/drivers/net/ixgb/ixgb_hw.c index 2b15155..acc6df7 100644 --- a/drivers/net/ixgb/ixgb_hw.c +++ b/drivers/net/ixgb/ixgb_hw.c @@ -83,7 +83,7 @@ static uint32_t ixgb_mac_reset(struct ixgb_hw *hw) #endif /* Delay a few ms just to allow the reset to complete */ - msec_delay(IXGB_DELAY_AFTER_RESET); + msleep(IXGB_DELAY_AFTER_RESET); ctrl_reg = IXGB_READ_REG(hw, CTRL0); #ifdef DBG /* Make sure the self-clearing global reset bit did self clear */ @@ -133,7 +133,7 @@ ixgb_adapter_stop(struct ixgb_hw *hw) */ IXGB_WRITE_REG(hw, RCTL, IXGB_READ_REG(hw, RCTL) & ~IXGB_RCTL_RXEN); IXGB_WRITE_REG(hw, TCTL, IXGB_READ_REG(hw, TCTL) & ~IXGB_TCTL_TXEN); - msec_delay(IXGB_DELAY_BEFORE_RESET); + msleep(IXGB_DELAY_BEFORE_RESET); /* Issue a global reset to the MAC. This will reset the chip's * transmit, receive, DMA, and link units. It will not effect @@ -300,7 +300,7 @@ ixgb_init_hw(struct ixgb_hw *hw) #endif /* Delay a few ms just to allow the reset to complete */ - msec_delay(IXGB_DELAY_AFTER_EE_RESET); + msleep(IXGB_DELAY_AFTER_EE_RESET); if (ixgb_get_eeprom_data(hw) == FALSE) { return(FALSE); diff --git a/drivers/net/ixgb/ixgb_osdep.h b/drivers/net/ixgb/ixgb_osdep.h index ee982fe..19cb1d5 100644 --- a/drivers/net/ixgb/ixgb_osdep.h +++ b/drivers/net/ixgb/ixgb_osdep.h @@ -40,18 +40,6 @@ #include <linux/interrupt.h> #include <linux/sched.h> -#ifndef msec_delay -#define msec_delay(x) do { if(in_interrupt()) { \ - /* Don't mdelay in interrupt context! */ \ - BUG(); \ - } else { \ - msleep(x); \ - } } while(0) -#endif - -#define PCI_COMMAND_REGISTER PCI_COMMAND -#define CMD_MEM_WRT_INVALIDATE PCI_COMMAND_INVALIDATE - typedef enum { #undef FALSE FALSE = 0, |