Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

1 files changed, 85 insertions, 0 deletions

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 039e87b..81d19d5 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2533,6 +2533,91 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1518, quirk_i82576_sriov);
 
 #endif	/* CONFIG_PCI_IOV */
 
+/*
+ * This is a quirk for the Ricoh MMC controller found as a part of
+ * some mulifunction chips.
+
+ * This is very similiar and based on the ricoh_mmc driver written by
+ * Philip Langdale. Thank you for these magic sequences.
+ *
+ * These chips implement the four main memory card controllers (SD, MMC, MS, xD)
+ * and one or both of cardbus or firewire.
+ *
+ * It happens that they implement SD and MMC
+ * support as separate controllers (and PCI functions). The linux SDHCI
+ * driver supports MMC cards but the chip detects MMC cards in hardware
+ * and directs them to the MMC controller - so the SDHCI driver never sees
+ * them.
+ *
+ * To get around this, we must disable the useless MMC controller.
+ * At that point, the SDHCI controller will start seeing them
+ * It seems to be the case that the relevant PCI registers to deactivate the
+ * MMC controller live on PCI function 0, which might be the cardbus controller
+ * or the firewire controller, depending on the particular chip in question
+ *
+ * This has to be done early, because as soon as we disable the MMC controller
+ * other pci functions shift up one level, e.g. function #2 becomes function
+ * #1, and this will confuse the pci core.
+ */
+
+#ifdef CONFIG_MMC_RICOH_MMC
+static void ricoh_mmc_fixup_rl5c476(struct pci_dev *dev)
+{
+	/* disable via cardbus interface */
+	u8 write_enable;
+	u8 write_target;
+	u8 disable;
+
+	/* disable must be done via function #0 */
+	if (PCI_FUNC(dev->devfn))
+		return;
+
+	pci_read_config_byte(dev, 0xB7, &disable);
+	if (disable & 0x02)
+		return;
+
+	pci_read_config_byte(dev, 0x8E, &write_enable);
+	pci_write_config_byte(dev, 0x8E, 0xAA);
+	pci_read_config_byte(dev, 0x8D, &write_target);
+	pci_write_config_byte(dev, 0x8D, 0xB7);
+	pci_write_config_byte(dev, 0xB7, disable | 0x02);
+	pci_write_config_byte(dev, 0x8E, write_enable);
+	pci_write_config_byte(dev, 0x8D, write_target);
+
+	dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via cardbus function)\n");
+	dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476);
+
+static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev)
+{
+	/* disable via firewire interface */
+	u8 write_enable;
+	u8 disable;
+
+	/* disable must be done via function #0 */
+	if (PCI_FUNC(dev->devfn))
+		return;
+
+	pci_read_config_byte(dev, 0xCB, &disable);
+
+	if (disable & 0x02)
+		return;
+
+	pci_read_config_byte(dev, 0xCA, &write_enable);
+	pci_write_config_byte(dev, 0xCA, 0x57);
+	pci_write_config_byte(dev, 0xCB, disable | 0x02);
+	pci_write_config_byte(dev, 0xCA, write_enable);
+
+	dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n");
+	dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
+#endif /*CONFIG_MMC_RICOH_MMC*/
+
+
 static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
 			  struct pci_fixup *end)
 {