ARM: 7024/1: simpad: Cleanup CS3 accessors.

- prepend CS3 accessors by simpad_ to indicate they
  are specific to simpad devices.
- use spinlock to protect shadow register.
- implement 8 read-only pins.
- use readl/writel macros so barriers are used where
  necessary.
- register CS3 as GPIO controller with 24 pins
  (16 output only and 8 input only).
- fix PCMCIA driver to access the read-only pins
  rather than the shadow register for status bits.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 16 insertions, 19 deletions

diff --git a/drivers/pcmcia/sa1100_simpad.c b/drivers/pcmcia/sa1100_simpad.c
index c998f7a..0fac965 100644
--- a/drivers/pcmcia/sa1100_simpad.c
+++ b/drivers/pcmcia/sa1100_simpad.c
@@ -15,10 +15,6 @@
 #include <mach/simpad.h>
 #include "sa1100_generic.h"
  
-extern long get_cs3_shadow(void);
-extern void set_cs3_bit(int value); 
-extern void clear_cs3_bit(int value);
-
 static struct pcmcia_irqs irqs[] = {
 	{ 1, IRQ_GPIO_CF_CD, "CF_CD" },
 };
@@ -26,7 +22,7 @@ static struct pcmcia_irqs irqs[] = {
 static int simpad_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
 
-	clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
+	simpad_clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
 
 	skt->socket.pci_irq = IRQ_GPIO_CF_IRQ;
 
@@ -38,8 +34,8 @@ static void simpad_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 	soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
 
 	/* Disable CF bus: */
-	//set_cs3_bit(PCMCIA_BUFF_DIS);
-	clear_cs3_bit(PCMCIA_RESET);       
+	/*simpad_set_cs3_bit(PCMCIA_BUFF_DIS);*/
+	simpad_clear_cs3_bit(PCMCIA_RESET);
 }
 
 static void
@@ -47,15 +43,16 @@ simpad_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 			   struct pcmcia_state *state)
 {
 	unsigned long levels = GPLR;
-	long cs3reg = get_cs3_shadow();
+	long cs3reg = simpad_get_cs3_ro();
 
 	state->detect=((levels & GPIO_CF_CD)==0)?1:0;
 	state->ready=(levels & GPIO_CF_IRQ)?1:0;
-	state->bvd1=1; /* Not available on Simpad. */
-	state->bvd2=1; /* Not available on Simpad. */
+	state->bvd1 = 1; /* Might be cs3reg & PCMCIA_BVD1 */
+	state->bvd2 = 1; /* Might be cs3reg & PCMCIA_BVD2 */
 	state->wrprot=0; /* Not available on Simpad. */
-  
-	if((cs3reg & 0x0c) == 0x0c) {
+
+	if ((cs3reg & (PCMCIA_VS1|PCMCIA_VS2)) ==
+			(PCMCIA_VS1|PCMCIA_VS2)) {
 		state->vs_3v=0;
 		state->vs_Xv=0;
 	} else {
@@ -75,23 +72,23 @@ simpad_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 	/* Murphy: see table of MIC2562a-1 */
 	switch (state->Vcc) {
 	case 0:
-		clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
+		simpad_clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
 		break;
 
 	case 33:  
-		clear_cs3_bit(VCC_3V_EN|EN1);
-		set_cs3_bit(VCC_5V_EN|EN0);
+		simpad_clear_cs3_bit(VCC_3V_EN|EN1);
+		simpad_set_cs3_bit(VCC_5V_EN|EN0);
 		break;
 
 	case 50:
-		clear_cs3_bit(VCC_5V_EN|EN1);
-		set_cs3_bit(VCC_3V_EN|EN0);
+		simpad_clear_cs3_bit(VCC_5V_EN|EN1);
+		simpad_set_cs3_bit(VCC_3V_EN|EN0);
 		break;
 
 	default:
 		printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
 			__func__, state->Vcc);
-		clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
+		simpad_clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
 		local_irq_restore(flags);
 		return -1;
 	}
@@ -110,7 +107,7 @@ static void simpad_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
 static void simpad_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
 {
 	soc_pcmcia_disable_irqs(skt, irqs, ARRAY_SIZE(irqs));
-	set_cs3_bit(PCMCIA_RESET);
+	simpad_set_cs3_bit(PCMCIA_RESET);
 }
 
 static struct pcmcia_low_level simpad_pcmcia_ops = {