diff options
author | Salyzyn, Mark <Mark_Salyzyn@adaptec.com> | 2008-01-16 15:39:06 (GMT) |
---|---|---|
committer | James Bottomley <James.Bottomley@HansenPartnership.com> | 2008-01-23 17:29:28 (GMT) |
commit | 8ce3eca4dc8161e030a055bde94cde28476e0894 (patch) | |
tree | 4cbf81513780508f763ce115a05ab1597a3a0ebc /drivers/scsi/aacraid/aacraid.h | |
parent | d07e03610ca1f4be373f32ad5b25ac00dbdb867d (diff) | |
download | linux-fsl-qoriq-8ce3eca4dc8161e030a055bde94cde28476e0894.tar.xz |
[SCSI] aacraid: remove pigs in space
I was amazed at how much embedded space was present in the aacraid
driver source files. Just selected five files from the set to clean up
for now and the attached patch swelled to 73K in size!
- Removed trailing space or tabs
- Removed spaces embedded within tabs
- Replaced leading 8 spaces with tabs
- Removed spaces before )
- Removed ClusterCommand as it was unused (noticed it as one triggered by above)
- Replaced scsi_status comparison with 0x02, to compare against SAM_STATUS_CHECK_CONDITION.
- Replaced a long series of spaces with tabs
- Replaced some simple if...defined() with ifdef/ifndef
Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Diffstat (limited to 'drivers/scsi/aacraid/aacraid.h')
-rw-r--r-- | drivers/scsi/aacraid/aacraid.h | 310 |
1 files changed, 153 insertions, 157 deletions
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 858b974..8a5b9c8 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -1,4 +1,4 @@ -#if (!defined(dprintk)) +#ifndef dprintk # define dprintk(x) #endif /* eg: if (nblank(dprintk(x))) */ @@ -50,9 +50,9 @@ struct diskparm /* * Firmware constants */ - + #define CT_NONE 0 -#define CT_OK 218 +#define CT_OK 218 #define FT_FILESYS 8 /* ADAPTEC's "FSA"(tm) filesystem */ #define FT_DRIVE 9 /* physical disk - addressable in scsi by bus/id/lun */ @@ -107,12 +107,12 @@ struct user_sgentryraw { struct sgmap { __le32 count; - struct sgentry sg[1]; + struct sgentry sg[1]; }; struct user_sgmap { u32 count; - struct user_sgentry sg[1]; + struct user_sgentry sg[1]; }; struct sgmap64 { @@ -137,18 +137,18 @@ struct user_sgmapraw { struct creation_info { - u8 buildnum; /* e.g., 588 */ - u8 usec; /* e.g., 588 */ - u8 via; /* e.g., 1 = FSU, - * 2 = API + u8 buildnum; /* e.g., 588 */ + u8 usec; /* e.g., 588 */ + u8 via; /* e.g., 1 = FSU, + * 2 = API */ - u8 year; /* e.g., 1997 = 97 */ + u8 year; /* e.g., 1997 = 97 */ __le32 date; /* - * unsigned Month :4; // 1 - 12 - * unsigned Day :6; // 1 - 32 - * unsigned Hour :6; // 0 - 23 - * unsigned Minute :6; // 0 - 60 - * unsigned Second :6; // 0 - 60 + * unsigned Month :4; // 1 - 12 + * unsigned Day :6; // 1 - 32 + * unsigned Hour :6; // 0 - 23 + * unsigned Minute :6; // 0 - 60 + * unsigned Second :6; // 0 - 60 */ __le32 serial[2]; /* e.g., 0x1DEADB0BFAFAF001 */ }; @@ -184,7 +184,7 @@ struct creation_info /* * Set the queues on a 16 byte alignment */ - + #define QUEUE_ALIGNMENT 16 /* @@ -203,9 +203,9 @@ struct aac_entry { * The adapter assumes the ProducerIndex and ConsumerIndex are grouped * adjacently and in that order. */ - + struct aac_qhdr { - __le64 header_addr;/* Address to hand the adapter to access + __le64 header_addr;/* Address to hand the adapter to access to this queue head */ __le32 *producer; /* The producer index for this queue (host address) */ __le32 *consumer; /* The consumer index for this queue (host address) */ @@ -215,7 +215,7 @@ struct aac_qhdr { * Define all the events which the adapter would like to notify * the host of. */ - + #define HostNormCmdQue 1 /* Change in host normal priority command queue */ #define HostHighCmdQue 2 /* Change in host high priority command queue */ #define HostNormRespQue 3 /* Change in host normal priority response queue */ @@ -286,17 +286,17 @@ struct aac_fibhdr { u8 StructType; /* Type FIB */ u8 Flags; /* Flags for FIB */ __le16 Size; /* Size of this FIB in bytes */ - __le16 SenderSize; /* Size of the FIB in the sender + __le16 SenderSize; /* Size of the FIB in the sender (for response sizing) */ __le32 SenderFibAddress; /* Host defined data in the FIB */ - __le32 ReceiverFibAddress;/* Logical address of this FIB for + __le32 ReceiverFibAddress;/* Logical address of this FIB for the adapter */ u32 SenderData; /* Place holder for the sender to store data */ union { struct { - __le32 _ReceiverTimeStart; /* Timestamp for + __le32 _ReceiverTimeStart; /* Timestamp for receipt of fib */ - __le32 _ReceiverTimeDone; /* Timestamp for + __le32 _ReceiverTimeDone; /* Timestamp for completion of fib */ } _s; } _u; @@ -311,7 +311,7 @@ struct hw_fib { * FIB commands */ -#define TestCommandResponse 1 +#define TestCommandResponse 1 #define TestAdapterCommand 2 /* * Lowlevel and comm commands @@ -350,10 +350,6 @@ struct hw_fib { #define ContainerCommand64 501 #define ContainerRawIo 502 /* - * Cluster Commands - */ -#define ClusterCommand 550 -/* * Scsi Port commands (scsi passthrough) */ #define ScsiPortCommand 600 @@ -375,19 +371,19 @@ struct hw_fib { */ enum fib_xfer_state { - HostOwned = (1<<0), - AdapterOwned = (1<<1), - FibInitialized = (1<<2), - FibEmpty = (1<<3), - AllocatedFromPool = (1<<4), - SentFromHost = (1<<5), - SentFromAdapter = (1<<6), - ResponseExpected = (1<<7), - NoResponseExpected = (1<<8), - AdapterProcessed = (1<<9), - HostProcessed = (1<<10), - HighPriority = (1<<11), - NormalPriority = (1<<12), + HostOwned = (1<<0), + AdapterOwned = (1<<1), + FibInitialized = (1<<2), + FibEmpty = (1<<3), + AllocatedFromPool = (1<<4), + SentFromHost = (1<<5), + SentFromAdapter = (1<<6), + ResponseExpected = (1<<7), + NoResponseExpected = (1<<8), + AdapterProcessed = (1<<9), + HostProcessed = (1<<10), + HighPriority = (1<<11), + NormalPriority = (1<<12), Async = (1<<13), AsyncIo = (1<<13), // rpbfix: remove with new regime PageFileIo = (1<<14), // rpbfix: remove with new regime @@ -420,7 +416,7 @@ struct aac_init __le32 AdapterFibAlign; __le32 printfbuf; __le32 printfbufsiz; - __le32 HostPhysMemPages; /* number of 4k pages of host + __le32 HostPhysMemPages; /* number of 4k pages of host physical memory */ __le32 HostElapsedSeconds; /* number of seconds since 1970. */ /* @@ -481,7 +477,7 @@ struct adapter_ops struct aac_driver_ident { - int (*init)(struct aac_dev *dev); + int (*init)(struct aac_dev *dev); char * name; char * vname; char * model; @@ -489,7 +485,7 @@ struct aac_driver_ident int quirks; }; /* - * Some adapter firmware needs communication memory + * Some adapter firmware needs communication memory * below 2gig. This tells the init function to set the * dma mask such that fib memory will be allocated where the * adapter firmware can get to it. @@ -531,29 +527,29 @@ struct aac_driver_ident * physically contigous block. The host structure that defines the * commuication queues will assume they are each a separate physically * contigous memory region that will support them all being one big - * contigous block. + * contigous block. * There is a command and response queue for each level and direction of * commuication. These regions are accessed by both the host and adapter. */ - + struct aac_queue { - u64 logical; /*address we give the adapter */ + u64 logical; /*address we give the adapter */ struct aac_entry *base; /*system virtual address */ - struct aac_qhdr headers; /*producer,consumer q headers*/ - u32 entries; /*Number of queue entries */ + struct aac_qhdr headers; /*producer,consumer q headers*/ + u32 entries; /*Number of queue entries */ wait_queue_head_t qfull; /*Event to wait on if q full */ wait_queue_head_t cmdready; /*Cmd ready from the adapter */ - /* This is only valid for adapter to host command queues. */ - spinlock_t *lock; /* Spinlock for this queue must take this lock before accessing the lock */ + /* This is only valid for adapter to host command queues. */ + spinlock_t *lock; /* Spinlock for this queue must take this lock before accessing the lock */ spinlock_t lockdata; /* Actual lock (used only on one side of the lock) */ - struct list_head cmdq; /* A queue of FIBs which need to be prcessed by the FS thread. This is */ - /* only valid for command queues which receive entries from the adapter. */ + struct list_head cmdq; /* A queue of FIBs which need to be prcessed by the FS thread. This is */ + /* only valid for command queues which receive entries from the adapter. */ u32 numpending; /* Number of entries on outstanding queue. */ struct aac_dev * dev; /* Back pointer to adapter structure */ }; /* - * Message queues. The order here is important, see also the + * Message queues. The order here is important, see also the * queue type ordering */ @@ -565,12 +561,12 @@ struct aac_queue_block /* * SaP1 Message Unit Registers */ - + struct sa_drawbridge_CSR { - /* Offset | Name */ + /* Offset | Name */ __le32 reserved[10]; /* 00h-27h | Reserved */ u8 LUT_Offset; /* 28h | Lookup Table Offset */ - u8 reserved1[3]; /* 29h-2bh | Reserved */ + u8 reserved1[3]; /* 29h-2bh | Reserved */ __le32 LUT_Data; /* 2ch | Looup Table Data */ __le32 reserved2[26]; /* 30h-97h | Reserved */ __le16 PRICLEARIRQ; /* 98h | Primary Clear Irq */ @@ -589,8 +585,8 @@ struct sa_drawbridge_CSR { __le32 MAILBOX5; /* bch | Scratchpad 5 */ __le32 MAILBOX6; /* c0h | Scratchpad 6 */ __le32 MAILBOX7; /* c4h | Scratchpad 7 */ - __le32 ROM_Setup_Data; /* c8h | Rom Setup and Data */ - __le32 ROM_Control_Addr;/* cch | Rom Control and Address */ + __le32 ROM_Setup_Data; /* c8h | Rom Setup and Data */ + __le32 ROM_Control_Addr;/* cch | Rom Control and Address */ __le32 reserved3[12]; /* d0h-ffh | reserved */ __le32 LUT[64]; /* 100h-1ffh | Lookup Table Entries */ }; @@ -603,7 +599,7 @@ struct sa_drawbridge_CSR { #define Mailbox5 SaDbCSR.MAILBOX5 #define Mailbox6 SaDbCSR.MAILBOX6 #define Mailbox7 SaDbCSR.MAILBOX7 - + #define DoorbellReg_p SaDbCSR.PRISETIRQ #define DoorbellReg_s SaDbCSR.SECSETIRQ #define DoorbellClrReg_p SaDbCSR.PRICLEARIRQ @@ -617,19 +613,19 @@ struct sa_drawbridge_CSR { #define DOORBELL_5 0x0020 #define DOORBELL_6 0x0040 - + #define PrintfReady DOORBELL_5 #define PrintfDone DOORBELL_5 - + struct sa_registers { struct sa_drawbridge_CSR SaDbCSR; /* 98h - c4h */ }; - + #define Sa_MINIPORT_REVISION 1 #define sa_readw(AEP, CSR) readl(&((AEP)->regs.sa->CSR)) -#define sa_readl(AEP, CSR) readl(&((AEP)->regs.sa->CSR)) +#define sa_readl(AEP, CSR) readl(&((AEP)->regs.sa->CSR)) #define sa_writew(AEP, CSR, value) writew(value, &((AEP)->regs.sa->CSR)) #define sa_writel(AEP, CSR, value) writel(value, &((AEP)->regs.sa->CSR)) @@ -646,21 +642,21 @@ struct rx_mu_registers { __le32 IMRx[2]; /* 1310h | 10h | Inbound Message Registers */ __le32 OMRx[2]; /* 1318h | 18h | Outbound Message Registers */ __le32 IDR; /* 1320h | 20h | Inbound Doorbell Register */ - __le32 IISR; /* 1324h | 24h | Inbound Interrupt + __le32 IISR; /* 1324h | 24h | Inbound Interrupt Status Register */ - __le32 IIMR; /* 1328h | 28h | Inbound Interrupt - Mask Register */ + __le32 IIMR; /* 1328h | 28h | Inbound Interrupt + Mask Register */ __le32 ODR; /* 132Ch | 2Ch | Outbound Doorbell Register */ - __le32 OISR; /* 1330h | 30h | Outbound Interrupt + __le32 OISR; /* 1330h | 30h | Outbound Interrupt Status Register */ - __le32 OIMR; /* 1334h | 34h | Outbound Interrupt + __le32 OIMR; /* 1334h | 34h | Outbound Interrupt Mask Register */ __le32 reserved2; /* 1338h | 38h | Reserved */ __le32 reserved3; /* 133Ch | 3Ch | Reserved */ __le32 InboundQueue;/* 1340h | 40h | Inbound Queue Port relative to firmware */ __le32 OutboundQueue;/*1344h | 44h | Outbound Queue Port relative to firmware */ - /* * Must access through ATU Inbound - Translation Window */ + /* * Must access through ATU Inbound + Translation Window */ }; struct rx_inbound { @@ -716,12 +712,12 @@ struct rkt_registers { typedef void (*fib_callback)(void *ctxt, struct fib *fibctx); struct aac_fib_context { - s16 type; // used for verification of structure - s16 size; + s16 type; // used for verification of structure + s16 size; u32 unique; // unique value representing this context ulong jiffies; // used for cleanup - dmb changed to ulong struct list_head next; // used to link context's into a linked list - struct semaphore wait_sem; // this is used to wait for the next fib to arrive. + struct semaphore wait_sem; // this is used to wait for the next fib to arrive. int wait; // Set to true when thread is in WaitForSingleObject unsigned long count; // total number of FIBs on FibList struct list_head fib_list; // this holds fibs and their attachd hw_fibs @@ -740,9 +736,9 @@ struct sense_data { u8 EOM:1; /* End Of Medium - reserved for random access devices */ u8 filemark:1; /* Filemark - reserved for random access devices */ - u8 information[4]; /* for direct-access devices, contains the unsigned - * logical block address or residue associated with - * the sense key + u8 information[4]; /* for direct-access devices, contains the unsigned + * logical block address or residue associated with + * the sense key */ u8 add_sense_len; /* number of additional sense bytes to follow this field */ u8 cmnd_info[4]; /* not used */ @@ -752,7 +748,7 @@ struct sense_data { u8 bit_ptr:3; /* indicates which byte of the CDB or parameter data * was in error */ - u8 BPV:1; /* bit pointer valid (BPV): 1- indicates that + u8 BPV:1; /* bit pointer valid (BPV): 1- indicates that * the bit_ptr field has valid value */ u8 reserved2:2; @@ -786,24 +782,24 @@ struct fib { /* * The Adapter that this I/O is destined for. */ - struct aac_dev *dev; + struct aac_dev *dev; /* * This is the event the sendfib routine will wait on if the * caller did not pass one and this is synch io. */ - struct semaphore event_wait; + struct semaphore event_wait; spinlock_t event_lock; u32 done; /* gets set to 1 when fib is complete */ - fib_callback callback; - void *callback_data; + fib_callback callback; + void *callback_data; u32 flags; // u32 dmb was ulong /* * And for the internal issue/reply queues (we may be able * to merge these two) */ struct list_head fiblink; - void *data; + void *data; struct hw_fib *hw_fib_va; /* Actual shared object */ dma_addr_t hw_fib_pa; /* physical address of hw_fib*/ }; @@ -813,7 +809,7 @@ struct fib { * * This is returned by the RequestAdapterInfo block */ - + struct aac_adapter_info { __le32 platform; @@ -832,7 +828,7 @@ struct aac_adapter_info __le32 biosrev; __le32 biosbuild; __le32 cluster; - __le32 clusterchannelmask; + __le32 clusterchannelmask; __le32 serial[2]; __le32 battery; __le32 options; @@ -922,13 +918,13 @@ struct aac_bus_info_response { #define AAC_OPT_HOST_TIME_FIB cpu_to_le32(1<<4) #define AAC_OPT_RAID50 cpu_to_le32(1<<5) #define AAC_OPT_4GB_WINDOW cpu_to_le32(1<<6) -#define AAC_OPT_SCSI_UPGRADEABLE cpu_to_le32(1<<7) +#define AAC_OPT_SCSI_UPGRADEABLE cpu_to_le32(1<<7) #define AAC_OPT_SOFT_ERR_REPORT cpu_to_le32(1<<8) -#define AAC_OPT_SUPPORTED_RECONDITION cpu_to_le32(1<<9) +#define AAC_OPT_SUPPORTED_RECONDITION cpu_to_le32(1<<9) #define AAC_OPT_SGMAP_HOST64 cpu_to_le32(1<<10) #define AAC_OPT_ALARM cpu_to_le32(1<<11) #define AAC_OPT_NONDASD cpu_to_le32(1<<12) -#define AAC_OPT_SCSI_MANAGED cpu_to_le32(1<<13) +#define AAC_OPT_SCSI_MANAGED cpu_to_le32(1<<13) #define AAC_OPT_RAID_SCSI_MODE cpu_to_le32(1<<14) #define AAC_OPT_SUPPLEMENT_ADAPTER_INFO cpu_to_le32(1<<16) #define AAC_OPT_NEW_COMM cpu_to_le32(1<<17) @@ -948,7 +944,7 @@ struct aac_dev /* * Map for 128 fib objects (64k) - */ + */ dma_addr_t hw_fib_pa; struct hw_fib *hw_fib_va; struct hw_fib *aif_base_va; @@ -959,24 +955,24 @@ struct aac_dev struct fib *free_fib; spinlock_t fib_lock; - + struct aac_queue_block *queues; /* * The user API will use an IOCTL to register itself to receive * FIBs from the adapter. The following list is used to keep * track of all the threads that have requested these FIBs. The - * mutex is used to synchronize access to all data associated + * mutex is used to synchronize access to all data associated * with the adapter fibs. */ struct list_head fib_list; struct adapter_ops a_ops; unsigned long fsrev; /* Main driver's revision number */ - + unsigned base_size; /* Size of mapped in region */ struct aac_init *init; /* Holds initialization info to communicate with adapter */ - dma_addr_t init_pa; /* Holds physical address of the init struct */ - + dma_addr_t init_pa; /* Holds physical address of the init struct */ + struct pci_dev *pdev; /* Our PCI interface */ void * printfbuf; /* pointer to buffer used for printf's from the adapter */ void * comm_addr; /* Base address of Comm area */ @@ -990,11 +986,11 @@ struct aac_dev struct fsa_dev_info *fsa_dev; struct task_struct *thread; int cardtype; - + /* * The following is the device specific extension. */ -#if (!defined(AAC_MIN_FOOTPRINT_SIZE)) +#ifndef AAC_MIN_FOOTPRINT_SIZE # define AAC_MIN_FOOTPRINT_SIZE 8192 #endif union @@ -1015,7 +1011,7 @@ struct aac_dev /* These are in adapter info but they are in the io flow so * lets break them out so we don't have to do an AND to check them */ - u8 nondasd_support; + u8 nondasd_support; u8 cache_protected; u8 dac_support; u8 raid_scsi_mode; @@ -1078,14 +1074,14 @@ struct aac_dev /* * Define the command values */ - + #define Null 0 -#define GetAttributes 1 -#define SetAttributes 2 -#define Lookup 3 -#define ReadLink 4 -#define Read 5 -#define Write 6 +#define GetAttributes 1 +#define SetAttributes 2 +#define Lookup 3 +#define ReadLink 4 +#define Read 5 +#define Write 6 #define Create 7 #define MakeDirectory 8 #define SymbolicLink 9 @@ -1181,19 +1177,19 @@ struct aac_dev struct aac_read { - __le32 command; - __le32 cid; - __le32 block; - __le32 count; + __le32 command; + __le32 cid; + __le32 block; + __le32 count; struct sgmap sg; // Must be last in struct because it is variable }; struct aac_read64 { - __le32 command; - __le16 cid; - __le16 sector_count; - __le32 block; + __le32 command; + __le16 cid; + __le16 sector_count; + __le32 block; __le16 pad; __le16 flags; struct sgmap64 sg; // Must be last in struct because it is variable @@ -1201,26 +1197,26 @@ struct aac_read64 struct aac_read_reply { - __le32 status; - __le32 count; + __le32 status; + __le32 count; }; struct aac_write { __le32 command; - __le32 cid; - __le32 block; - __le32 count; - __le32 stable; // Not used + __le32 cid; + __le32 block; + __le32 count; + __le32 stable; // Not used struct sgmap sg; // Must be last in struct because it is variable }; struct aac_write64 { - __le32 command; - __le16 cid; - __le16 sector_count; - __le32 block; + __le32 command; + __le16 cid; + __le16 sector_count; + __le32 block; __le16 pad; __le16 flags; #define IO_TYPE_WRITE 0x00000000 @@ -1231,7 +1227,7 @@ struct aac_write64 struct aac_write_reply { __le32 status; - __le32 count; + __le32 count; __le32 committed; }; @@ -1334,10 +1330,10 @@ struct aac_srb_reply #define SRB_NoDataXfer 0x0000 #define SRB_DisableDisconnect 0x0004 #define SRB_DisableSynchTransfer 0x0008 -#define SRB_BypassFrozenQueue 0x0010 +#define SRB_BypassFrozenQueue 0x0010 #define SRB_DisableAutosense 0x0020 #define SRB_DataIn 0x0040 -#define SRB_DataOut 0x0080 +#define SRB_DataOut 0x0080 /* * SRB Functions - set in aac_srb->function @@ -1360,7 +1356,7 @@ struct aac_srb_reply #define SRBF_RemoveDevice 0x0016 #define SRBF_DomainValidation 0x0017 -/* +/* * SRB SCSI Status - set in aac_srb->scsi_status */ #define SRB_STATUS_PENDING 0x00 @@ -1519,17 +1515,17 @@ struct aac_get_container_count_resp { */ struct aac_mntent { - __le32 oid; + __le32 oid; u8 name[16]; /* if applicable */ struct creation_info create_info; /* if applicable */ __le32 capacity; - __le32 vol; /* substrate structure */ - __le32 obj; /* FT_FILESYS, etc. */ - __le32 state; /* unready for mounting, + __le32 vol; /* substrate structure */ + __le32 obj; /* FT_FILESYS, etc. */ + __le32 state; /* unready for mounting, readonly, etc. */ - union aac_contentinfo fileinfo; /* Info specific to content + union aac_contentinfo fileinfo; /* Info specific to content manager (eg, filesystem) */ - __le32 altoid; /* != oid <==> snapshot or + __le32 altoid; /* != oid <==> snapshot or broken mirror exists */ __le32 capacityhigh; }; @@ -1546,7 +1542,7 @@ struct aac_query_mount { struct aac_mount { __le32 status; - __le32 type; /* should be same as that requested */ + __le32 type; /* should be same as that requested */ __le32 count; struct aac_mntent mnt[1]; }; @@ -1616,7 +1612,7 @@ struct aac_delete_disk { u32 disknum; u32 cnum; }; - + struct fib_ioctl { u32 fibctx; @@ -1630,10 +1626,10 @@ struct revision __le32 version; __le32 build; }; - + /* - * Ugly - non Linux like ioctl coding for back compat. + * Ugly - non Linux like ioctl coding for back compat. */ #define CTL_CODE(function, method) ( \ @@ -1641,7 +1637,7 @@ struct revision ) /* - * Define the method codes for how buffers are passed for I/O and FS + * Define the method codes for how buffers are passed for I/O and FS * controls */ @@ -1652,15 +1648,15 @@ struct revision * Filesystem ioctls */ -#define FSACTL_SENDFIB CTL_CODE(2050, METHOD_BUFFERED) -#define FSACTL_SEND_RAW_SRB CTL_CODE(2067, METHOD_BUFFERED) +#define FSACTL_SENDFIB CTL_CODE(2050, METHOD_BUFFERED) +#define FSACTL_SEND_RAW_SRB CTL_CODE(2067, METHOD_BUFFERED) #define FSACTL_DELETE_DISK 0x163 #define FSACTL_QUERY_DISK 0x173 #define FSACTL_OPEN_GET_ADAPTER_FIB CTL_CODE(2100, METHOD_BUFFERED) #define FSACTL_GET_NEXT_ADAPTER_FIB CTL_CODE(2101, METHOD_BUFFERED) #define FSACTL_CLOSE_GET_ADAPTER_FIB CTL_CODE(2102, METHOD_BUFFERED) #define FSACTL_MINIPORT_REV_CHECK CTL_CODE(2107, METHOD_BUFFERED) -#define FSACTL_GET_PCI_INFO CTL_CODE(2119, METHOD_BUFFERED) +#define FSACTL_GET_PCI_INFO CTL_CODE(2119, METHOD_BUFFERED) #define FSACTL_FORCE_DELETE_DISK CTL_CODE(2120, METHOD_NEITHER) #define FSACTL_GET_CONTAINERS 2131 #define FSACTL_SEND_LARGE_FIB CTL_CODE(2138, METHOD_BUFFERED) @@ -1669,7 +1665,7 @@ struct revision struct aac_common { /* - * If this value is set to 1 then interrupt moderation will occur + * If this value is set to 1 then interrupt moderation will occur * in the base commuication support. */ u32 irq_mod; @@ -1698,11 +1694,11 @@ extern struct aac_common aac_config; * The following macro is used when sending and receiving FIBs. It is * only used for debugging. */ - + #ifdef DBG #define FIB_COUNTER_INCREMENT(counter) (counter)++ #else -#define FIB_COUNTER_INCREMENT(counter) +#define FIB_COUNTER_INCREMENT(counter) #endif /* @@ -1734,17 +1730,17 @@ extern struct aac_common aac_config; * * The adapter reports is present state through the phase. Only * a single phase should be ever be set. Each phase can have multiple - * phase status bits to provide more detailed information about the - * state of the board. Care should be taken to ensure that any phase + * phase status bits to provide more detailed information about the + * state of the board. Care should be taken to ensure that any phase * status bits that are set when changing the phase are also valid * for the new phase or be cleared out. Adapter software (monitor, - * iflash, kernel) is responsible for properly maintining the phase + * iflash, kernel) is responsible for properly maintining the phase * status mailbox when it is running. - * - * MONKER_API Phases * - * Phases are bit oriented. It is NOT valid to have multiple bits set - */ + * MONKER_API Phases + * + * Phases are bit oriented. It is NOT valid to have multiple bits set + */ #define SELF_TEST_FAILED 0x00000004 #define MONITOR_PANIC 0x00000020 @@ -1767,8 +1763,8 @@ extern struct aac_common aac_config; * For FIB communication, we need all of the following things * to send back to the user. */ - -#define AifCmdEventNotify 1 /* Notify of event */ + +#define AifCmdEventNotify 1 /* Notify of event */ #define AifEnConfigChange 3 /* Adapter configuration change */ #define AifEnContainerChange 4 /* Container configuration change */ #define AifEnDeviceFailure 5 /* SCSI device failed */ @@ -1792,11 +1788,11 @@ extern struct aac_common aac_config; #define AifDenVolumeExtendComplete 201 /* A volume extend completed */ #define AifReqJobList 100 /* Gets back complete job list */ #define AifReqJobsForCtr 101 /* Gets back jobs for specific container */ -#define AifReqJobsForScsi 102 /* Gets back jobs for specific SCSI device */ -#define AifReqJobReport 103 /* Gets back a specific job report or list of them */ +#define AifReqJobsForScsi 102 /* Gets back jobs for specific SCSI device */ +#define AifReqJobReport 103 /* Gets back a specific job report or list of them */ #define AifReqTerminateJob 104 /* Terminates job */ #define AifReqSuspendJob 105 /* Suspends a job */ -#define AifReqResumeJob 106 /* Resumes a job */ +#define AifReqResumeJob 106 /* Resumes a job */ #define AifReqSendAPIReport 107 /* API generic report requests */ #define AifReqAPIJobStart 108 /* Start a job from the API */ #define AifReqAPIJobUpdate 109 /* Update a job report from the API */ @@ -1815,8 +1811,8 @@ struct aac_aifcmd { }; /** - * Convert capacity to cylinders - * accounting for the fact capacity could be a 64 bit value + * Convert capacity to cylinders + * accounting for the fact capacity could be a 64 bit value * */ static inline unsigned int cap_to_cyls(sector_t capacity, unsigned divisor) |