diff options
author | Karen Xie <kxie@chelsio.com> | 2008-12-09 22:15:32 (GMT) |
---|---|---|
committer | James Bottomley <James.Bottomley@HansenPartnership.com> | 2008-12-30 16:45:33 (GMT) |
commit | c3673464ebc004a3d82063cd41b9cf74d1b55db2 (patch) | |
tree | b061ecd04da7dd3ddddad8f39a4922f437493311 /drivers/scsi/cxgb3i/cxgb3i_offload.c | |
parent | b632ade282895562924d18b8eedd11a825f4b08c (diff) | |
download | linux-fsl-qoriq-c3673464ebc004a3d82063cd41b9cf74d1b55db2.tar.xz |
[SCSI] cxgb3i: Add cxgb3i iSCSI driver.
This patch implements the cxgb3i iscsi connection acceleration for the
open-iscsi initiator.
The cxgb3i driver offers the iscsi PDU based offload:
- digest insertion and verification
- payload direct-placement into host memory buffer.
Signed-off-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Diffstat (limited to 'drivers/scsi/cxgb3i/cxgb3i_offload.c')
-rw-r--r-- | drivers/scsi/cxgb3i/cxgb3i_offload.c | 1810 |
1 files changed, 1810 insertions, 0 deletions
diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c new file mode 100644 index 0000000..5f16081b --- /dev/null +++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c @@ -0,0 +1,1810 @@ +/* + * cxgb3i_offload.c: Chelsio S3xx iscsi offloaded tcp connection management + * + * Copyright (C) 2003-2008 Chelsio Communications. All rights reserved. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this + * release for licensing terms and conditions. + * + * Written by: Dimitris Michailidis (dm@chelsio.com) + * Karen Xie (kxie@chelsio.com) + */ + +#include <linux/if_vlan.h> +#include <linux/version.h> + +#include "cxgb3_defs.h" +#include "cxgb3_ctl_defs.h" +#include "firmware_exports.h" +#include "cxgb3i_offload.h" +#include "cxgb3i_pdu.h" +#include "cxgb3i_ddp.h" + +#ifdef __DEBUG_C3CN_CONN__ +#define c3cn_conn_debug cxgb3i_log_info +#else +#define c3cn_conn_debug(fmt...) +#endif + +#ifdef __DEBUG_C3CN_TX__ +#define c3cn_tx_debug cxgb3i_log_debug +#else +#define c3cn_tx_debug(fmt...) +#endif + +#ifdef __DEBUG_C3CN_RX__ +#define c3cn_rx_debug cxgb3i_log_debug +#else +#define c3cn_rx_debug(fmt...) +#endif + +/* + * module parameters releated to offloaded iscsi connection + */ +static int cxgb3_rcv_win = 256 * 1024; +module_param(cxgb3_rcv_win, int, 0644); +MODULE_PARM_DESC(cxgb3_rcv_win, "TCP receive window in bytes (default=256KB)"); + +static int cxgb3_snd_win = 64 * 1024; +module_param(cxgb3_snd_win, int, 0644); +MODULE_PARM_DESC(cxgb3_snd_win, "TCP send window in bytes (default=64KB)"); + +static int cxgb3_rx_credit_thres = 10 * 1024; +module_param(cxgb3_rx_credit_thres, int, 0644); +MODULE_PARM_DESC(rx_credit_thres, + "RX credits return threshold in bytes (default=10KB)"); + +static unsigned int cxgb3_max_connect = 8 * 1024; +module_param(cxgb3_max_connect, uint, 0644); +MODULE_PARM_DESC(cxgb3_max_connect, "Max. # of connections (default=8092)"); + +static unsigned int cxgb3_sport_base = 20000; +module_param(cxgb3_sport_base, uint, 0644); +MODULE_PARM_DESC(cxgb3_sport_base, "starting port number (default=20000)"); + +/* + * cxgb3i tcp connection data(per adapter) list + */ +static LIST_HEAD(cdata_list); +static DEFINE_RWLOCK(cdata_rwlock); + +static int c3cn_push_tx_frames(struct s3_conn *c3cn, int req_completion); +static void c3cn_release_offload_resources(struct s3_conn *c3cn); + +/* + * iscsi source port management + * + * Find a free source port in the port allocation map. We use a very simple + * rotor scheme to look for the next free port. + * + * If a source port has been specified make sure that it doesn't collide with + * our normal source port allocation map. If it's outside the range of our + * allocation/deallocation scheme just let them use it. + * + * If the source port is outside our allocation range, the caller is + * responsible for keeping track of their port usage. + */ +static int c3cn_get_port(struct s3_conn *c3cn, struct cxgb3i_sdev_data *cdata) +{ + unsigned int start; + int idx; + + if (!cdata) + goto error_out; + + if (c3cn->saddr.sin_port != 0) { + idx = ntohs(c3cn->saddr.sin_port) - cxgb3_sport_base; + if (idx < 0 || idx >= cxgb3_max_connect) + return 0; + if (!test_and_set_bit(idx, cdata->sport_map)) + return -EADDRINUSE; + } + + /* the sport_map_next may not be accurate but that is okay, sport_map + should be */ + start = idx = cdata->sport_map_next; + do { + if (++idx >= cxgb3_max_connect) + idx = 0; + if (!(test_and_set_bit(idx, cdata->sport_map))) { + c3cn->saddr.sin_port = htons(cxgb3_sport_base + idx); + cdata->sport_map_next = idx; + c3cn_conn_debug("%s reserve port %u.\n", + cdata->cdev->name, + cxgb3_sport_base + idx); + return 0; + } + } while (idx != start); + +error_out: + return -EADDRNOTAVAIL; +} + +static void c3cn_put_port(struct s3_conn *c3cn) +{ + struct cxgb3i_sdev_data *cdata = CXGB3_SDEV_DATA(c3cn->cdev); + + if (c3cn->saddr.sin_port) { + int idx = ntohs(c3cn->saddr.sin_port) - cxgb3_sport_base; + + c3cn->saddr.sin_port = 0; + if (idx < 0 || idx >= cxgb3_max_connect) + return; + clear_bit(idx, cdata->sport_map); + c3cn_conn_debug("%s, release port %u.\n", + cdata->cdev->name, cxgb3_sport_base + idx); + } +} + +static inline void c3cn_set_flag(struct s3_conn *c3cn, enum c3cn_flags flag) +{ + __set_bit(flag, &c3cn->flags); + c3cn_conn_debug("c3cn 0x%p, set %d, s %u, f 0x%lx.\n", + c3cn, flag, c3cn->state, c3cn->flags); +} + +static inline void c3cn_clear_flag(struct s3_conn *c3cn, enum c3cn_flags flag) +{ + __clear_bit(flag, &c3cn->flags); + c3cn_conn_debug("c3cn 0x%p, clear %d, s %u, f 0x%lx.\n", + c3cn, flag, c3cn->state, c3cn->flags); +} + +static inline int c3cn_flag(struct s3_conn *c3cn, enum c3cn_flags flag) +{ + if (c3cn == NULL) + return 0; + return test_bit(flag, &c3cn->flags); +} + +static void c3cn_set_state(struct s3_conn *c3cn, int state) +{ + c3cn_conn_debug("c3cn 0x%p state -> %u.\n", c3cn, state); + c3cn->state = state; +} + +static inline void c3cn_hold(struct s3_conn *c3cn) +{ + atomic_inc(&c3cn->refcnt); +} + +static inline void c3cn_put(struct s3_conn *c3cn) +{ + if (atomic_dec_and_test(&c3cn->refcnt)) { + c3cn_conn_debug("free c3cn 0x%p, s %u, f 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + kfree(c3cn); + } +} + +static void c3cn_closed(struct s3_conn *c3cn) +{ + c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + + c3cn_put_port(c3cn); + c3cn_release_offload_resources(c3cn); + c3cn_set_state(c3cn, C3CN_STATE_CLOSED); + cxgb3i_conn_closing(c3cn); +} + +/* + * CPL (Chelsio Protocol Language) defines a message passing interface between + * the host driver and T3 asic. + * The section below implments CPLs that related to iscsi tcp connection + * open/close/abort and data send/receive. + */ + +/* + * CPL connection active open request: host -> + */ +static unsigned int find_best_mtu(const struct t3c_data *d, unsigned short mtu) +{ + int i = 0; + + while (i < d->nmtus - 1 && d->mtus[i + 1] <= mtu) + ++i; + return i; +} + +static unsigned int select_mss(struct s3_conn *c3cn, unsigned int pmtu) +{ + unsigned int idx; + struct dst_entry *dst = c3cn->dst_cache; + struct t3cdev *cdev = c3cn->cdev; + const struct t3c_data *td = T3C_DATA(cdev); + u16 advmss = dst_metric(dst, RTAX_ADVMSS); + + if (advmss > pmtu - 40) + advmss = pmtu - 40; + if (advmss < td->mtus[0] - 40) + advmss = td->mtus[0] - 40; + idx = find_best_mtu(td, advmss + 40); + return idx; +} + +static inline int compute_wscale(int win) +{ + int wscale = 0; + while (wscale < 14 && (65535<<wscale) < win) + wscale++; + return wscale; +} + +static inline unsigned int calc_opt0h(struct s3_conn *c3cn) +{ + int wscale = compute_wscale(cxgb3_rcv_win); + return V_KEEP_ALIVE(1) | + F_TCAM_BYPASS | + V_WND_SCALE(wscale) | + V_MSS_IDX(c3cn->mss_idx); +} + +static inline unsigned int calc_opt0l(struct s3_conn *c3cn) +{ + return V_ULP_MODE(ULP_MODE_ISCSI) | + V_RCV_BUFSIZ(cxgb3_rcv_win>>10); +} + +static void make_act_open_req(struct s3_conn *c3cn, struct sk_buff *skb, + unsigned int atid, const struct l2t_entry *e) +{ + struct cpl_act_open_req *req; + + c3cn_conn_debug("c3cn 0x%p, atid 0x%x.\n", c3cn, atid); + + skb->priority = CPL_PRIORITY_SETUP; + req = (struct cpl_act_open_req *)__skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_ACT_OPEN_REQ, atid)); + req->local_port = c3cn->saddr.sin_port; + req->peer_port = c3cn->daddr.sin_port; + req->local_ip = c3cn->saddr.sin_addr.s_addr; + req->peer_ip = c3cn->daddr.sin_addr.s_addr; + req->opt0h = htonl(calc_opt0h(c3cn) | V_L2T_IDX(e->idx) | + V_TX_CHANNEL(e->smt_idx)); + req->opt0l = htonl(calc_opt0l(c3cn)); + req->params = 0; +} + +static void fail_act_open(struct s3_conn *c3cn, int errno) +{ + c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + c3cn->err = errno; + c3cn_closed(c3cn); +} + +static void act_open_req_arp_failure(struct t3cdev *dev, struct sk_buff *skb) +{ + struct s3_conn *c3cn = (struct s3_conn *)skb->sk; + + c3cn_conn_debug("c3cn 0x%p, state %u.\n", c3cn, c3cn->state); + + c3cn_hold(c3cn); + spin_lock_bh(&c3cn->lock); + if (c3cn->state == C3CN_STATE_CONNECTING) + fail_act_open(c3cn, EHOSTUNREACH); + spin_unlock_bh(&c3cn->lock); + c3cn_put(c3cn); + __kfree_skb(skb); +} + +/* + * CPL connection close request: host -> + * + * Close a connection by sending a CPL_CLOSE_CON_REQ message and queue it to + * the write queue (i.e., after any unsent txt data). + */ +static void skb_entail(struct s3_conn *c3cn, struct sk_buff *skb, + int flags) +{ + CXGB3_SKB_CB(skb)->seq = c3cn->write_seq; + CXGB3_SKB_CB(skb)->flags = flags; + __skb_queue_tail(&c3cn->write_queue, skb); +} + +static void send_close_req(struct s3_conn *c3cn) +{ + struct sk_buff *skb = c3cn->cpl_close; + struct cpl_close_con_req *req = (struct cpl_close_con_req *)skb->head; + unsigned int tid = c3cn->tid; + + c3cn_conn_debug("c3cn 0x%p, state 0x%x, flag 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + + c3cn->cpl_close = NULL; + + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_CLOSE_CON)); + req->wr.wr_lo = htonl(V_WR_TID(tid)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_CLOSE_CON_REQ, tid)); + req->rsvd = htonl(c3cn->write_seq); + + skb_entail(c3cn, skb, C3CB_FLAG_NO_APPEND); + if (c3cn->state != C3CN_STATE_CONNECTING) + c3cn_push_tx_frames(c3cn, 1); +} + +/* + * CPL connection abort request: host -> + * + * Send an ABORT_REQ message. Makes sure we do not send multiple ABORT_REQs + * for the same connection and also that we do not try to send a message + * after the connection has closed. + */ +static void abort_arp_failure(struct t3cdev *cdev, struct sk_buff *skb) +{ + struct cpl_abort_req *req = cplhdr(skb); + + c3cn_conn_debug("tdev 0x%p.\n", cdev); + + req->cmd = CPL_ABORT_NO_RST; + cxgb3_ofld_send(cdev, skb); +} + +static inline void c3cn_purge_write_queue(struct s3_conn *c3cn) +{ + struct sk_buff *skb; + + while ((skb = __skb_dequeue(&c3cn->write_queue))) + __kfree_skb(skb); +} + +static void send_abort_req(struct s3_conn *c3cn) +{ + struct sk_buff *skb = c3cn->cpl_abort_req; + struct cpl_abort_req *req; + unsigned int tid = c3cn->tid; + + if (unlikely(c3cn->state == C3CN_STATE_ABORTING) || !skb || + !c3cn->cdev) + return; + + c3cn_set_state(c3cn, C3CN_STATE_ABORTING); + + c3cn_conn_debug("c3cn 0x%p, flag ABORT_RPL + ABORT_SHUT.\n", c3cn); + + c3cn_set_flag(c3cn, C3CN_ABORT_RPL_PENDING); + + /* Purge the send queue so we don't send anything after an abort. */ + c3cn_purge_write_queue(c3cn); + + c3cn->cpl_abort_req = NULL; + req = (struct cpl_abort_req *)skb->head; + + skb->priority = CPL_PRIORITY_DATA; + set_arp_failure_handler(skb, abort_arp_failure); + + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_HOST_ABORT_CON_REQ)); + req->wr.wr_lo = htonl(V_WR_TID(tid)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_ABORT_REQ, tid)); + req->rsvd0 = htonl(c3cn->snd_nxt); + req->rsvd1 = !c3cn_flag(c3cn, C3CN_TX_DATA_SENT); + req->cmd = CPL_ABORT_SEND_RST; + + l2t_send(c3cn->cdev, skb, c3cn->l2t); +} + +/* + * CPL connection abort reply: host -> + * + * Send an ABORT_RPL message in response of the ABORT_REQ received. + */ +static void send_abort_rpl(struct s3_conn *c3cn, int rst_status) +{ + struct sk_buff *skb = c3cn->cpl_abort_rpl; + struct cpl_abort_rpl *rpl = (struct cpl_abort_rpl *)skb->head; + + c3cn->cpl_abort_rpl = NULL; + + skb->priority = CPL_PRIORITY_DATA; + rpl->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_HOST_ABORT_CON_RPL)); + rpl->wr.wr_lo = htonl(V_WR_TID(c3cn->tid)); + OPCODE_TID(rpl) = htonl(MK_OPCODE_TID(CPL_ABORT_RPL, c3cn->tid)); + rpl->cmd = rst_status; + + cxgb3_ofld_send(c3cn->cdev, skb); +} + +/* + * CPL connection rx data ack: host -> + * Send RX credits through an RX_DATA_ACK CPL message. Returns the number of + * credits sent. + */ +static u32 send_rx_credits(struct s3_conn *c3cn, u32 credits, u32 dack) +{ + struct sk_buff *skb; + struct cpl_rx_data_ack *req; + + skb = alloc_skb(sizeof(*req), GFP_ATOMIC); + if (!skb) + return 0; + + req = (struct cpl_rx_data_ack *)__skb_put(skb, sizeof(*req)); + req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD)); + OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_RX_DATA_ACK, c3cn->tid)); + req->credit_dack = htonl(dack | V_RX_CREDITS(credits)); + skb->priority = CPL_PRIORITY_ACK; + cxgb3_ofld_send(c3cn->cdev, skb); + return credits; +} + +/* + * CPL connection tx data: host -> + * + * Send iscsi PDU via TX_DATA CPL message. Returns the number of + * credits sent. + * Each TX_DATA consumes work request credit (wrs), so we need to keep track of + * how many we've used so far and how many are pending (i.e., yet ack'ed by T3). + */ + +/* + * For ULP connections HW may inserts digest bytes into the pdu. Those digest + * bytes are not sent by the host but are part of the TCP payload and therefore + * consume TCP sequence space. + */ +static const unsigned int cxgb3_ulp_extra_len[] = { 0, 4, 4, 8 }; +static inline unsigned int ulp_extra_len(const struct sk_buff *skb) +{ + return cxgb3_ulp_extra_len[skb_ulp_mode(skb) & 3]; +} + +static unsigned int wrlen __read_mostly; + +/* + * The number of WRs needed for an skb depends on the number of fragments + * in the skb and whether it has any payload in its main body. This maps the + * length of the gather list represented by an skb into the # of necessary WRs. + * + * The max. length of an skb is controlled by the max pdu size which is ~16K. + * Also, assume the min. fragment length is the sector size (512), then add + * extra fragment counts for iscsi bhs and payload padding. + */ +#define SKB_WR_LIST_SIZE (16384/512 + 3) +static unsigned int skb_wrs[SKB_WR_LIST_SIZE] __read_mostly; + +static void s3_init_wr_tab(unsigned int wr_len) +{ + int i; + + if (skb_wrs[1]) /* already initialized */ + return; + + for (i = 1; i < SKB_WR_LIST_SIZE; i++) { + int sgl_len = (3 * i) / 2 + (i & 1); + + sgl_len += 3; + skb_wrs[i] = (sgl_len <= wr_len + ? 1 : 1 + (sgl_len - 2) / (wr_len - 1)); + } + + wrlen = wr_len * 8; +} + +static inline void reset_wr_list(struct s3_conn *c3cn) +{ + c3cn->wr_pending_head = NULL; +} + +/* + * Add a WR to a connections's list of pending WRs. This is a singly-linked + * list of sk_buffs operating as a FIFO. The head is kept in wr_pending_head + * and the tail in wr_pending_tail. + */ +static inline void enqueue_wr(struct s3_conn *c3cn, + struct sk_buff *skb) +{ + skb->sp = NULL; + + /* + * We want to take an extra reference since both us and the driver + * need to free the packet before it's really freed. We know there's + * just one user currently so we use atomic_set rather than skb_get + * to avoid the atomic op. + */ + atomic_set(&skb->users, 2); + + if (!c3cn->wr_pending_head) + c3cn->wr_pending_head = skb; + else + c3cn->wr_pending_tail->sp = (void *)skb; + c3cn->wr_pending_tail = skb; +} + +static inline struct sk_buff *peek_wr(const struct s3_conn *c3cn) +{ + return c3cn->wr_pending_head; +} + +static inline void free_wr_skb(struct sk_buff *skb) +{ + kfree_skb(skb); +} + +static inline struct sk_buff *dequeue_wr(struct s3_conn *c3cn) +{ + struct sk_buff *skb = c3cn->wr_pending_head; + + if (likely(skb)) { + /* Don't bother clearing the tail */ + c3cn->wr_pending_head = (struct sk_buff *)skb->sp; + skb->sp = NULL; + } + return skb; +} + +static void purge_wr_queue(struct s3_conn *c3cn) +{ + struct sk_buff *skb; + while ((skb = dequeue_wr(c3cn)) != NULL) + free_wr_skb(skb); +} + +static inline void make_tx_data_wr(struct s3_conn *c3cn, struct sk_buff *skb, + int len) +{ + struct tx_data_wr *req; + + skb_reset_transport_header(skb); + req = (struct tx_data_wr *)__skb_push(skb, sizeof(*req)); + req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_TX_DATA)); + req->wr_lo = htonl(V_WR_TID(c3cn->tid)); + req->sndseq = htonl(c3cn->snd_nxt); + /* len includes the length of any HW ULP additions */ + req->len = htonl(len); + req->param = htonl(V_TX_PORT(c3cn->l2t->smt_idx)); + /* V_TX_ULP_SUBMODE sets both the mode and submode */ + req->flags = htonl(V_TX_ULP_SUBMODE(skb_ulp_mode(skb)) | + V_TX_SHOVE((skb_peek(&c3cn->write_queue) ? 0 : 1))); + + if (!c3cn_flag(c3cn, C3CN_TX_DATA_SENT)) { + req->flags |= htonl(V_TX_ACK_PAGES(2) | F_TX_INIT | + V_TX_CPU_IDX(c3cn->qset)); + /* Sendbuffer is in units of 32KB. */ + req->param |= htonl(V_TX_SNDBUF(cxgb3_snd_win >> 15)); + c3cn_set_flag(c3cn, C3CN_TX_DATA_SENT); + } +} + +/** + * c3cn_push_tx_frames -- start transmit + * @c3cn: the offloaded connection + * @req_completion: request wr_ack or not + * + * Prepends TX_DATA_WR or CPL_CLOSE_CON_REQ headers to buffers waiting in a + * connection's send queue and sends them on to T3. Must be called with the + * connection's lock held. Returns the amount of send buffer space that was + * freed as a result of sending queued data to T3. + */ +static void arp_failure_discard(struct t3cdev *cdev, struct sk_buff *skb) +{ + kfree_skb(skb); +} + +static int c3cn_push_tx_frames(struct s3_conn *c3cn, int req_completion) +{ + int total_size = 0; + struct sk_buff *skb; + struct t3cdev *cdev; + struct cxgb3i_sdev_data *cdata; + + if (unlikely(c3cn->state == C3CN_STATE_CONNECTING || + c3cn->state == C3CN_STATE_CLOSE_WAIT_1 || + c3cn->state == C3CN_STATE_ABORTING)) { + c3cn_tx_debug("c3cn 0x%p, in closing state %u.\n", + c3cn, c3cn->state); + return 0; + } + + cdev = c3cn->cdev; + cdata = CXGB3_SDEV_DATA(cdev); + + while (c3cn->wr_avail + && (skb = skb_peek(&c3cn->write_queue)) != NULL) { + int len = skb->len; /* length before skb_push */ + int frags = skb_shinfo(skb)->nr_frags + (len != skb->data_len); + int wrs_needed = skb_wrs[frags]; + + if (wrs_needed > 1 && len + sizeof(struct tx_data_wr) <= wrlen) + wrs_needed = 1; + + WARN_ON(frags >= SKB_WR_LIST_SIZE || wrs_needed < 1); + + if (c3cn->wr_avail < wrs_needed) { + c3cn_tx_debug("c3cn 0x%p, skb len %u/%u, frag %u, " + "wr %d < %u.\n", + c3cn, skb->len, skb->datalen, frags, + wrs_needed, c3cn->wr_avail); + break; + } + + __skb_unlink(skb, &c3cn->write_queue); + skb->priority = CPL_PRIORITY_DATA; + skb->csum = wrs_needed; /* remember this until the WR_ACK */ + c3cn->wr_avail -= wrs_needed; + c3cn->wr_unacked += wrs_needed; + enqueue_wr(c3cn, skb); + + if (likely(CXGB3_SKB_CB(skb)->flags & C3CB_FLAG_NEED_HDR)) { + len += ulp_extra_len(skb); + make_tx_data_wr(c3cn, skb, len); + c3cn->snd_nxt += len; + if ((req_completion + && c3cn->wr_unacked == wrs_needed) + || (CXGB3_SKB_CB(skb)->flags & C3CB_FLAG_COMPL) + || c3cn->wr_unacked >= c3cn->wr_max / 2) { + struct work_request_hdr *wr = cplhdr(skb); + + wr->wr_hi |= htonl(F_WR_COMPL); + c3cn->wr_unacked = 0; + } + CXGB3_SKB_CB(skb)->flags &= ~C3CB_FLAG_NEED_HDR; + } + + total_size += skb->truesize; + set_arp_failure_handler(skb, arp_failure_discard); + l2t_send(cdev, skb, c3cn->l2t); + } + return total_size; +} + +/* + * process_cpl_msg: -> host + * Top-level CPL message processing used by most CPL messages that + * pertain to connections. + */ +static inline void process_cpl_msg(void (*fn)(struct s3_conn *, + struct sk_buff *), + struct s3_conn *c3cn, + struct sk_buff *skb) +{ + spin_lock_bh(&c3cn->lock); + fn(c3cn, skb); + spin_unlock_bh(&c3cn->lock); +} + +/* + * process_cpl_msg_ref: -> host + * Similar to process_cpl_msg() but takes an extra connection reference around + * the call to the handler. Should be used if the handler may drop a + * connection reference. + */ +static inline void process_cpl_msg_ref(void (*fn) (struct s3_conn *, + struct sk_buff *), + struct s3_conn *c3cn, + struct sk_buff *skb) +{ + c3cn_hold(c3cn); + process_cpl_msg(fn, c3cn, skb); + c3cn_put(c3cn); +} + +/* + * Process a CPL_ACT_ESTABLISH message: -> host + * Updates connection state from an active establish CPL message. Runs with + * the connection lock held. + */ + +static inline void s3_free_atid(struct t3cdev *cdev, unsigned int tid) +{ + struct s3_conn *c3cn = cxgb3_free_atid(cdev, tid); + if (c3cn) + c3cn_put(c3cn); +} + +static void c3cn_established(struct s3_conn *c3cn, u32 snd_isn, + unsigned int opt) +{ + c3cn_conn_debug("c3cn 0x%p, state %u.\n", c3cn, c3cn->state); + + c3cn->write_seq = c3cn->snd_nxt = c3cn->snd_una = snd_isn; + + /* + * Causes the first RX_DATA_ACK to supply any Rx credits we couldn't + * pass through opt0. + */ + if (cxgb3_rcv_win > (M_RCV_BUFSIZ << 10)) + c3cn->rcv_wup -= cxgb3_rcv_win - (M_RCV_BUFSIZ << 10); + + dst_confirm(c3cn->dst_cache); + + smp_mb(); + + c3cn_set_state(c3cn, C3CN_STATE_ESTABLISHED); +} + +static void process_act_establish(struct s3_conn *c3cn, struct sk_buff *skb) +{ + struct cpl_act_establish *req = cplhdr(skb); + u32 rcv_isn = ntohl(req->rcv_isn); /* real RCV_ISN + 1 */ + + c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + + if (unlikely(c3cn->state != C3CN_STATE_CONNECTING)) + cxgb3i_log_error("TID %u expected SYN_SENT, got EST., s %u\n", + c3cn->tid, c3cn->state); + + c3cn->copied_seq = c3cn->rcv_wup = c3cn->rcv_nxt = rcv_isn; + c3cn_established(c3cn, ntohl(req->snd_isn), ntohs(req->tcp_opt)); + + __kfree_skb(skb); + + if (unlikely(c3cn_flag(c3cn, C3CN_ACTIVE_CLOSE_NEEDED))) + /* upper layer has requested closing */ + send_abort_req(c3cn); + else if (c3cn_push_tx_frames(c3cn, 1)) + cxgb3i_conn_tx_open(c3cn); +} + +static int do_act_establish(struct t3cdev *cdev, struct sk_buff *skb, + void *ctx) +{ + struct cpl_act_establish *req = cplhdr(skb); + unsigned int tid = GET_TID(req); + unsigned int atid = G_PASS_OPEN_TID(ntohl(req->tos_tid)); + struct s3_conn *c3cn = ctx; + struct cxgb3i_sdev_data *cdata = CXGB3_SDEV_DATA(cdev); + + c3cn_conn_debug("rcv, tid 0x%x, c3cn 0x%p, s %u, f 0x%lx.\n", + tid, c3cn, c3cn->state, c3cn->flags); + + c3cn->tid = tid; + c3cn_hold(c3cn); + cxgb3_insert_tid(cdata->cdev, cdata->client, c3cn, tid); + s3_free_atid(cdev, atid); + + c3cn->qset = G_QNUM(ntohl(skb->csum)); + + process_cpl_msg(process_act_establish, c3cn, skb); + return 0; +} + +/* + * Process a CPL_ACT_OPEN_RPL message: -> host + * Handle active open failures. + */ +static int act_open_rpl_status_to_errno(int status) +{ + switch (status) { + case CPL_ERR_CONN_RESET: + return ECONNREFUSED; + case CPL_ERR_ARP_MISS: + return EHOSTUNREACH; + case CPL_ERR_CONN_TIMEDOUT: + return ETIMEDOUT; + case CPL_ERR_TCAM_FULL: + return ENOMEM; + case CPL_ERR_CONN_EXIST: + cxgb3i_log_error("ACTIVE_OPEN_RPL: 4-tuple in use\n"); + return EADDRINUSE; + default: + return EIO; + } +} + +static void act_open_retry_timer(unsigned long data) +{ + struct sk_buff *skb; + struct s3_conn *c3cn = (struct s3_conn *)data; + + c3cn_conn_debug("c3cn 0x%p, state %u.\n", c3cn, c3cn->state); + + spin_lock_bh(&c3cn->lock); + skb = alloc_skb(sizeof(struct cpl_act_open_req), GFP_ATOMIC); + if (!skb) + fail_act_open(c3cn, ENOMEM); + else { + skb->sk = (struct sock *)c3cn; + set_arp_failure_handler(skb, act_open_req_arp_failure); + make_act_open_req(c3cn, skb, c3cn->tid, c3cn->l2t); + l2t_send(c3cn->cdev, skb, c3cn->l2t); + } + spin_unlock_bh(&c3cn->lock); + c3cn_put(c3cn); +} + +static void process_act_open_rpl(struct s3_conn *c3cn, struct sk_buff *skb) +{ + struct cpl_act_open_rpl *rpl = cplhdr(skb); + + c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + + if (rpl->status == CPL_ERR_CONN_EXIST && + c3cn->retry_timer.function != act_open_retry_timer) { + c3cn->retry_timer.function = act_open_retry_timer; + if (!mod_timer(&c3cn->retry_timer, jiffies + HZ / 2)) + c3cn_hold(c3cn); + } else + fail_act_open(c3cn, act_open_rpl_status_to_errno(rpl->status)); + __kfree_skb(skb); +} + +static int do_act_open_rpl(struct t3cdev *cdev, struct sk_buff *skb, void *ctx) +{ + struct s3_conn *c3cn = ctx; + struct cpl_act_open_rpl *rpl = cplhdr(skb); + + c3cn_conn_debug("rcv, status 0x%x, c3cn 0x%p, s %u, f 0x%lx.\n", + rpl->status, c3cn, c3cn->state, c3cn->flags); + + if (rpl->status != CPL_ERR_TCAM_FULL && + rpl->status != CPL_ERR_CONN_EXIST && + rpl->status != CPL_ERR_ARP_MISS) + cxgb3_queue_tid_release(cdev, GET_TID(rpl)); + + process_cpl_msg_ref(process_act_open_rpl, c3cn, skb); + return 0; +} + +/* + * Process PEER_CLOSE CPL messages: -> host + * Handle peer FIN. + */ +static void process_peer_close(struct s3_conn *c3cn, struct sk_buff *skb) +{ + c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + + if (c3cn_flag(c3cn, C3CN_ABORT_RPL_PENDING)) + goto out; + + switch (c3cn->state) { + case C3CN_STATE_ESTABLISHED: + c3cn_set_state(c3cn, C3CN_STATE_PASSIVE_CLOSE); + break; + case C3CN_STATE_ACTIVE_CLOSE: + c3cn_set_state(c3cn, C3CN_STATE_CLOSE_WAIT_2); + break; + case C3CN_STATE_CLOSE_WAIT_1: + c3cn_closed(c3cn); + break; + case C3CN_STATE_ABORTING: + break; + default: + cxgb3i_log_error("%s: peer close, TID %u in bad state %u\n", + c3cn->cdev->name, c3cn->tid, c3cn->state); + } + + cxgb3i_conn_closing(c3cn); +out: + __kfree_skb(skb); +} + +static int do_peer_close(struct t3cdev *cdev, struct sk_buff *skb, void *ctx) +{ + struct s3_conn *c3cn = ctx; + + c3cn_conn_debug("rcv, c3cn 0x%p, s %u, f 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + process_cpl_msg_ref(process_peer_close, c3cn, skb); + return 0; +} + +/* + * Process CLOSE_CONN_RPL CPL message: -> host + * Process a peer ACK to our FIN. + */ +static void process_close_con_rpl(struct s3_conn *c3cn, struct sk_buff *skb) +{ + struct cpl_close_con_rpl *rpl = cplhdr(skb); + + c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + + c3cn->snd_una = ntohl(rpl->snd_nxt) - 1; /* exclude FIN */ + + if (c3cn_flag(c3cn, C3CN_ABORT_RPL_PENDING)) + goto out; + + switch (c3cn->state) { + case C3CN_STATE_ACTIVE_CLOSE: + c3cn_set_state(c3cn, C3CN_STATE_CLOSE_WAIT_1); + break; + case C3CN_STATE_CLOSE_WAIT_1: + case C3CN_STATE_CLOSE_WAIT_2: + c3cn_closed(c3cn); + break; + case C3CN_STATE_ABORTING: + break; + default: + cxgb3i_log_error("%s: close_rpl, TID %u in bad state %u\n", + c3cn->cdev->name, c3cn->tid, c3cn->state); + } + +out: + kfree_skb(skb); +} + +static int do_close_con_rpl(struct t3cdev *cdev, struct sk_buff *skb, + void *ctx) +{ + struct s3_conn *c3cn = ctx; + + c3cn_conn_debug("rcv, c3cn 0x%p, s %u, f 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + + process_cpl_msg_ref(process_close_con_rpl, c3cn, skb); + return 0; +} + +/* + * Process ABORT_REQ_RSS CPL message: -> host + * Process abort requests. If we are waiting for an ABORT_RPL we ignore this + * request except that we need to reply to it. + */ + +static int abort_status_to_errno(struct s3_conn *c3cn, int abort_reason, + int *need_rst) +{ + switch (abort_reason) { + case CPL_ERR_BAD_SYN: /* fall through */ + case CPL_ERR_CONN_RESET: + return c3cn->state > C3CN_STATE_ESTABLISHED ? + EPIPE : ECONNRESET; + case CPL_ERR_XMIT_TIMEDOUT: + case CPL_ERR_PERSIST_TIMEDOUT: + case CPL_ERR_FINWAIT2_TIMEDOUT: + case CPL_ERR_KEEPALIVE_TIMEDOUT: + return ETIMEDOUT; + default: + return EIO; + } +} + +static void process_abort_req(struct s3_conn *c3cn, struct sk_buff *skb) +{ + int rst_status = CPL_ABORT_NO_RST; + const struct cpl_abort_req_rss *req = cplhdr(skb); + + c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + + if (!c3cn_flag(c3cn, C3CN_ABORT_REQ_RCVD)) { + c3cn_set_flag(c3cn, C3CN_ABORT_REQ_RCVD); + c3cn_set_state(c3cn, C3CN_STATE_ABORTING); + __kfree_skb(skb); + return; + } + + c3cn_clear_flag(c3cn, C3CN_ABORT_REQ_RCVD); + send_abort_rpl(c3cn, rst_status); + + if (!c3cn_flag(c3cn, C3CN_ABORT_RPL_PENDING)) { + c3cn->err = + abort_status_to_errno(c3cn, req->status, &rst_status); + c3cn_closed(c3cn); + } +} + +static int do_abort_req(struct t3cdev *cdev, struct sk_buff *skb, void *ctx) +{ + const struct cpl_abort_req_rss *req = cplhdr(skb); + struct s3_conn *c3cn = ctx; + + c3cn_conn_debug("rcv, c3cn 0x%p, s 0x%x, f 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + + if (req->status == CPL_ERR_RTX_NEG_ADVICE || + req->status == CPL_ERR_PERSIST_NEG_ADVICE) { + __kfree_skb(skb); + return 0; + } + + process_cpl_msg_ref(process_abort_req, c3cn, skb); + return 0; +} + +/* + * Process ABORT_RPL_RSS CPL message: -> host + * Process abort replies. We only process these messages if we anticipate + * them as the coordination between SW and HW in this area is somewhat lacking + * and sometimes we get ABORT_RPLs after we are done with the connection that + * originated the ABORT_REQ. + */ +static void process_abort_rpl(struct s3_conn *c3cn, struct sk_buff *skb) +{ + c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + + if (c3cn_flag(c3cn, C3CN_ABORT_RPL_PENDING)) { + if (!c3cn_flag(c3cn, C3CN_ABORT_RPL_RCVD)) + c3cn_set_flag(c3cn, C3CN_ABORT_RPL_RCVD); + else { + c3cn_clear_flag(c3cn, C3CN_ABORT_RPL_RCVD); + c3cn_clear_flag(c3cn, C3CN_ABORT_RPL_PENDING); + if (c3cn_flag(c3cn, C3CN_ABORT_REQ_RCVD)) + cxgb3i_log_error("%s tid %u, ABORT_RPL_RSS\n", + c3cn->cdev->name, c3cn->tid); + c3cn_closed(c3cn); + } + } + __kfree_skb(skb); +} + +static int do_abort_rpl(struct t3cdev *cdev, struct sk_buff *skb, void *ctx) +{ + struct cpl_abort_rpl_rss *rpl = cplhdr(skb); + struct s3_conn *c3cn = ctx; + + c3cn_conn_debug("rcv, status 0x%x, c3cn 0x%p, s %u, 0x%lx.\n", + rpl->status, c3cn, c3cn ? c3cn->state : 0, + c3cn ? c3cn->flags : 0UL); + + /* + * Ignore replies to post-close aborts indicating that the abort was + * requested too late. These connections are terminated when we get + * PEER_CLOSE or CLOSE_CON_RPL and by the time the abort_rpl_rss + * arrives the TID is either no longer used or it has been recycled. + */ + if (rpl->status == CPL_ERR_ABORT_FAILED) + goto discard; + + /* + * Sometimes we've already closed the connection, e.g., a post-close + * abort races with ABORT_REQ_RSS, the latter frees the connection + * expecting the ABORT_REQ will fail with CPL_ERR_ABORT_FAILED, + * but FW turns the ABORT_REQ into a regular one and so we get + * ABORT_RPL_RSS with status 0 and no connection. + */ + if (!c3cn) + goto discard; + + process_cpl_msg_ref(process_abort_rpl, c3cn, skb); + return 0; + +discard: + __kfree_skb(skb); + return 0; +} + +/* + * Process RX_ISCSI_HDR CPL message: -> host + * Handle received PDUs, the payload could be DDP'ed. If not, the payload + * follow after the bhs. + */ +static void process_rx_iscsi_hdr(struct s3_conn *c3cn, struct sk_buff *skb) +{ + struct cpl_iscsi_hdr *hdr_cpl = cplhdr(skb); + struct cpl_iscsi_hdr_norss data_cpl; + struct cpl_rx_data_ddp_norss ddp_cpl; + unsigned int hdr_len, data_len, status; + unsigned int len; + int err; + + if (unlikely(c3cn->state >= C3CN_STATE_PASSIVE_CLOSE)) { + if (c3cn->state != C3CN_STATE_ABORTING) + send_abort_req(c3cn); + __kfree_skb(skb); + return; + } + + CXGB3_SKB_CB(skb)->seq = ntohl(hdr_cpl->seq); + CXGB3_SKB_CB(skb)->flags = 0; + + skb_reset_transport_header(skb); + __skb_pull(skb, sizeof(struct cpl_iscsi_hdr)); + + len = hdr_len = ntohs(hdr_cpl->len); + /* msg coalesce is off or not enough data received */ + if (skb->len <= hdr_len) { + cxgb3i_log_error("%s: TID %u, ISCSI_HDR, skb len %u < %u.\n", + c3cn->cdev->name, c3cn->tid, + skb->len, hdr_len); + goto abort_conn; + } + + err = skb_copy_bits(skb, skb->len - sizeof(ddp_cpl), &ddp_cpl, + sizeof(ddp_cpl)); + if (err < 0) + goto abort_conn; + + skb_ulp_mode(skb) = ULP2_FLAG_DATA_READY; + skb_ulp_pdulen(skb) = ntohs(ddp_cpl.len); + skb_ulp_ddigest(skb) = ntohl(ddp_cpl.ulp_crc); + status = ntohl(ddp_cpl.ddp_status); + + c3cn_rx_debug("rx skb 0x%p, len %u, pdulen %u, ddp status 0x%x.\n", + skb, skb->len, skb_ulp_pdulen(skb), status); + + if (status & (1 << RX_DDP_STATUS_HCRC_SHIFT)) + skb_ulp_mode(skb) |= ULP2_FLAG_HCRC_ERROR; + if (status & (1 << RX_DDP_STATUS_DCRC_SHIFT)) + skb_ulp_mode(skb) |= ULP2_FLAG_DCRC_ERROR; + if (status & (1 << RX_DDP_STATUS_PAD_SHIFT)) + skb_ulp_mode(skb) |= ULP2_FLAG_PAD_ERROR; + + if (skb->len > (hdr_len + sizeof(ddp_cpl))) { + err = skb_copy_bits(skb, hdr_len, &data_cpl, sizeof(data_cpl)); + if (err < 0) + goto abort_conn; + data_len = ntohs(data_cpl.len); + len += sizeof(data_cpl) + data_len; + } else if (status & (1 << RX_DDP_STATUS_DDP_SHIFT)) + skb_ulp_mode(skb) |= ULP2_FLAG_DATA_DDPED; + + c3cn->rcv_nxt = ntohl(ddp_cpl.seq) + skb_ulp_pdulen(skb); + __pskb_trim(skb, len); + __skb_queue_tail(&c3cn->receive_queue, skb); + cxgb3i_conn_pdu_ready(c3cn); + + return; + +abort_conn: + send_abort_req(c3cn); + __kfree_skb(skb); +} + +static int do_iscsi_hdr(struct t3cdev *t3dev, struct sk_buff *skb, void *ctx) +{ + struct s3_conn *c3cn = ctx; + + process_cpl_msg(process_rx_iscsi_hdr, c3cn, skb); + return 0; +} + +/* + * Process TX_DATA_ACK CPL messages: -> host + * Process an acknowledgment of WR completion. Advance snd_una and send the + * next batch of work requests from the write queue. + */ +static void process_wr_ack(struct s3_conn *c3cn, struct sk_buff *skb) +{ + struct cpl_wr_ack *hdr = cplhdr(skb); + unsigned int credits = ntohs(hdr->credits); + u32 snd_una = ntohl(hdr->snd_una); + + c3cn->wr_avail += credits; + if (c3cn->wr_unacked > c3cn->wr_max - c3cn->wr_avail) + c3cn->wr_unacked = c3cn->wr_max - c3cn->wr_avail; + + while (credits) { + struct sk_buff *p = peek_wr(c3cn); + + if (unlikely(!p)) { + cxgb3i_log_error("%u WR_ACK credits for TID %u with " + "nothing pending, state %u\n", + credits, c3cn->tid, c3cn->state); + break; + } + if (unlikely(credits < p->csum)) { + p->csum -= credits; + break; + } else { + dequeue_wr(c3cn); + credits -= p->csum; + free_wr_skb(p); + } + } + + if (unlikely(before(snd_una, c3cn->snd_una))) + goto out_free; + + if (c3cn->snd_una != snd_una) { + c3cn->snd_una = snd_una; + dst_confirm(c3cn->dst_cache); + } + + if (skb_queue_len(&c3cn->write_queue) && c3cn_push_tx_frames(c3cn, 0)) + cxgb3i_conn_tx_open(c3cn); +out_free: + __kfree_skb(skb); +} + +static int do_wr_ack(struct t3cdev *cdev, struct sk_buff *skb, void *ctx) +{ + struct s3_conn *c3cn = ctx; + + process_cpl_msg(process_wr_ack, c3cn, skb); + return 0; +} + +/* + * for each connection, pre-allocate skbs needed for close/abort requests. So + * that we can service the request right away. + */ +static void c3cn_free_cpl_skbs(struct s3_conn *c3cn) +{ + if (c3cn->cpl_close) + kfree_skb(c3cn->cpl_close); + if (c3cn->cpl_abort_req) + kfree_skb(c3cn->cpl_abort_req); + if (c3cn->cpl_abort_rpl) + kfree_skb(c3cn->cpl_abort_rpl); +} + +static int c3cn_alloc_cpl_skbs(struct s3_conn *c3cn) +{ + c3cn->cpl_close = alloc_skb(sizeof(struct cpl_close_con_req), + GFP_KERNEL); + if (!c3cn->cpl_close) + return -ENOMEM; + skb_put(c3cn->cpl_close, sizeof(struct cpl_close_con_req)); + + c3cn->cpl_abort_req = alloc_skb(sizeof(struct cpl_abort_req), + GFP_KERNEL); + if (!c3cn->cpl_abort_req) + goto free_cpl_skbs; + skb_put(c3cn->cpl_abort_req, sizeof(struct cpl_abort_req)); + + c3cn->cpl_abort_rpl = alloc_skb(sizeof(struct cpl_abort_rpl), + GFP_KERNEL); + if (!c3cn->cpl_abort_rpl) + goto free_cpl_skbs; + skb_put(c3cn->cpl_abort_rpl, sizeof(struct cpl_abort_rpl)); + + return 0; + +free_cpl_skbs: + c3cn_free_cpl_skbs(c3cn); + return -ENOMEM; +} + +/** + * c3cn_release_offload_resources - release offload resource + * @c3cn: the offloaded iscsi tcp connection. + * Release resources held by an offload connection (TID, L2T entry, etc.) + */ +static void c3cn_release_offload_resources(struct s3_conn *c3cn) +{ + struct t3cdev *cdev = c3cn->cdev; + unsigned int tid = c3cn->tid; + + if (!cdev) + return; + + c3cn->qset = 0; + + c3cn_free_cpl_skbs(c3cn); + + if (c3cn->wr_avail != c3cn->wr_max) { + purge_wr_queue(c3cn); + reset_wr_list(c3cn); + } + + if (c3cn->l2t) { + l2t_release(L2DATA(cdev), c3cn->l2t); + c3cn->l2t = NULL; + } + + if (c3cn->state == C3CN_STATE_CONNECTING) /* we have ATID */ + s3_free_atid(cdev, tid); + else { /* we have TID */ + cxgb3_remove_tid(cdev, (void *)c3cn, tid); + c3cn_put(c3cn); + } + + c3cn->cdev = NULL; +} + +/** + * cxgb3i_c3cn_create - allocate and initialize an s3_conn structure + * returns the s3_conn structure allocated. + */ +struct s3_conn *cxgb3i_c3cn_create(void) +{ + struct s3_conn *c3cn; + + c3cn = kzalloc(sizeof(*c3cn), GFP_KERNEL); + if (!c3cn) + return NULL; + + /* pre-allocate close/abort cpl, so we don't need to wait for memory + when close/abort is requested. */ + if (c3cn_alloc_cpl_skbs(c3cn) < 0) + goto free_c3cn; + + c3cn_conn_debug("alloc c3cn 0x%p.\n", c3cn); + + c3cn->flags = 0; + spin_lock_init(&c3cn->lock); + atomic_set(&c3cn->refcnt, 1); + skb_queue_head_init(&c3cn->receive_queue); + skb_queue_head_init(&c3cn->write_queue); + setup_timer(&c3cn->retry_timer, NULL, (unsigned long)c3cn); + rwlock_init(&c3cn->callback_lock); + + return c3cn; + +free_c3cn: + kfree(c3cn); + return NULL; +} + +static void c3cn_active_close(struct s3_conn *c3cn) +{ + int data_lost; + int close_req = 0; + + c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + + dst_confirm(c3cn->dst_cache); + + c3cn_hold(c3cn); + spin_lock_bh(&c3cn->lock); + + data_lost = skb_queue_len(&c3cn->receive_queue); + __skb_queue_purge(&c3cn->receive_queue); + + switch (c3cn->state) { + case C3CN_STATE_CLOSED: + case C3CN_STATE_ACTIVE_CLOSE: + case C3CN_STATE_CLOSE_WAIT_1: + case C3CN_STATE_CLOSE_WAIT_2: + case C3CN_STATE_ABORTING: + /* nothing need to be done */ + break; + case C3CN_STATE_CONNECTING: + /* defer until cpl_act_open_rpl or cpl_act_establish */ + c3cn_set_flag(c3cn, C3CN_ACTIVE_CLOSE_NEEDED); + break; + case C3CN_STATE_ESTABLISHED: + close_req = 1; + c3cn_set_state(c3cn, C3CN_STATE_ACTIVE_CLOSE); + break; + case C3CN_STATE_PASSIVE_CLOSE: + close_req = 1; + c3cn_set_state(c3cn, C3CN_STATE_CLOSE_WAIT_2); + break; + } + + if (close_req) { + if (data_lost) + /* Unread data was tossed, zap the connection. */ + send_abort_req(c3cn); + else + send_close_req(c3cn); + } + + spin_unlock_bh(&c3cn->lock); + c3cn_put(c3cn); +} + +/** + * cxgb3i_c3cn_release - close and release an iscsi tcp connection and any + * resource held + * @c3cn: the iscsi tcp connection + */ +void cxgb3i_c3cn_release(struct s3_conn *c3cn) +{ + c3cn_conn_debug("c3cn 0x%p, s %u, f 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + if (likely(c3cn->state != C3CN_STATE_CONNECTING)) + c3cn_active_close(c3cn); + else + c3cn_set_flag(c3cn, C3CN_ACTIVE_CLOSE_NEEDED); + c3cn_put(c3cn); +} + +static int is_cxgb3_dev(struct net_device *dev) +{ + struct cxgb3i_sdev_data *cdata; + + write_lock(&cdata_rwlock); + list_for_each_entry(cdata, &cdata_list, list) { + struct adap_ports *ports = &cdata->ports; + int i; + + for (i = 0; i < ports->nports; i++) + if (dev == ports->lldevs[i]) { + write_unlock(&cdata_rwlock); + return 1; + } + } + write_unlock(&cdata_rwlock); + return 0; +} + +/** + * cxgb3_egress_dev - return the cxgb3 egress device + * @root_dev: the root device anchoring the search + * @c3cn: the connection used to determine egress port in bonding mode + * @context: in bonding mode, indicates a connection set up or failover + * + * Return egress device or NULL if the egress device isn't one of our ports. + */ +static struct net_device *cxgb3_egress_dev(struct net_device *root_dev, + struct s3_conn *c3cn, + int context) +{ + while (root_dev) { + if (root_dev->priv_flags & IFF_802_1Q_VLAN) + root_dev = vlan_dev_real_dev(root_dev); + else if (is_cxgb3_dev(root_dev)) + return root_dev; + else + return NULL; + } + return NULL; +} + +static struct rtable *find_route(__be32 saddr, __be32 daddr, + __be16 sport, __be16 dport) +{ + struct rtable *rt; + struct flowi fl = { + .oif = 0, + .nl_u = { + .ip4_u = { + .daddr = daddr, + .saddr = saddr, + .tos = 0 } }, + .proto = IPPROTO_TCP, + .uli_u = { + .ports = { + .sport = sport, + .dport = dport } } }; + + if (ip_route_output_flow(&init_net, &rt, &fl, NULL, 0)) + return NULL; + return rt; +} + +/* + * Assign offload parameters to some connection fields. + */ +static void init_offload_conn(struct s3_conn *c3cn, + struct t3cdev *cdev, + struct dst_entry *dst) +{ + BUG_ON(c3cn->cdev != cdev); + c3cn->wr_max = c3cn->wr_avail = T3C_DATA(cdev)->max_wrs; + c3cn->wr_unacked = 0; + c3cn->mss_idx = select_mss(c3cn, dst_mtu(dst)); + + reset_wr_list(c3cn); +} + +static int initiate_act_open(struct s3_conn *c3cn, struct net_device *dev) +{ + struct cxgb3i_sdev_data *cdata = NDEV2CDATA(dev); + struct t3cdev *cdev = cdata->cdev; + struct dst_entry *dst = c3cn->dst_cache; + struct sk_buff *skb; + + c3cn_conn_debug("c3cn 0x%p, state %u, flag 0x%lx.\n", + c3cn, c3cn->state, c3cn->flags); + /* + * Initialize connection data. Note that the flags and ULP mode are + * initialized higher up ... + */ + c3cn->dev = dev; + c3cn->cdev = cdev; + c3cn->tid = cxgb3_alloc_atid(cdev, cdata->client, c3cn); + if (c3cn->tid < 0) + goto out_err; + + c3cn->qset = 0; + c3cn->l2t = t3_l2t_get(cdev, dst->neighbour, dev); + if (!c3cn->l2t) + goto free_tid; + + skb = alloc_skb(sizeof(struct cpl_act_open_req), GFP_KERNEL); + if (!skb) + goto free_l2t; + + skb->sk = (struct sock *)c3cn; + set_arp_failure_handler(skb, act_open_req_arp_failure); + + c3cn_hold(c3cn); + + init_offload_conn(c3cn, cdev, dst); + c3cn->err = 0; + + make_act_open_req(c3cn, skb, c3cn->tid, c3cn->l2t); + l2t_send(cdev, skb, c3cn->l2t); + return 0; + +free_l2t: + l2t_release(L2DATA(cdev), c3cn->l2t); +free_tid: + s3_free_atid(cdev, c3cn->tid); + c3cn->tid = 0; +out_err: + return -1; +} + + +/** + * cxgb3i_c3cn_connect - initiates an iscsi tcp connection to a given address + * @c3cn: the iscsi tcp connection + * @usin: destination address + * + * return 0 if active open request is sent, < 0 otherwise. + */ +int cxgb3i_c3cn_connect(struct s3_conn *c3cn, struct sockaddr_in *usin) +{ + struct rtable *rt; + struct net_device *dev; + struct cxgb3i_sdev_data *cdata; + struct t3cdev *cdev; + __be32 sipv4; + int err; + + if (usin->sin_family != AF_INET) + return -EAFNOSUPPORT; + + c3cn->daddr.sin_port = usin->sin_port; + c3cn->daddr.sin_addr.s_addr = usin->sin_addr.s_addr; + + rt = find_route(c3cn->saddr.sin_addr.s_addr, + c3cn->daddr.sin_addr.s_addr, + c3cn->saddr.sin_port, + c3cn->daddr.sin_port); + if (rt == NULL) { + c3cn_conn_debug("NO route to 0x%x, port %u.\n", + c3cn->daddr.sin_addr.s_addr, + ntohs(c3cn->daddr.sin_port)); + return -ENETUNREACH; + } + + if (rt->rt_flags & (RTCF_MULTICAST | RTCF_BROADCAST)) { + c3cn_conn_debug("multi-cast route to 0x%x, port %u.\n", + c3cn->daddr.sin_addr.s_addr, + ntohs(c3cn->daddr.sin_port)); + ip_rt_put(rt); + return -ENETUNREACH; + } + + if (!c3cn->saddr.sin_addr.s_addr) + c3cn->saddr.sin_addr.s_addr = rt->rt_src; + + /* now commit destination to connection */ + c3cn->dst_cache = &rt->u.dst; + + /* try to establish an offloaded connection */ + dev = cxgb3_egress_dev(c3cn->dst_cache->dev, c3cn, 0); + if (dev == NULL) { + c3cn_conn_debug("c3cn 0x%p, egress dev NULL.\n", c3cn); + return -ENETUNREACH; + } + cdata = NDEV2CDATA(dev); + cdev = cdata->cdev; + + /* get a source port if one hasn't been provided */ + err = c3cn_get_port(c3cn, cdata); + if (err) + return err; + + c3cn_conn_debug("c3cn 0x%p get port %u.\n", + c3cn, ntohs(c3cn->saddr.sin_port)); + + sipv4 = cxgb3i_get_private_ipv4addr(dev); + if (!sipv4) { + c3cn_conn_debug("c3cn 0x%p, iscsi ip not configured.\n", c3cn); + sipv4 = c3cn->saddr.sin_addr.s_addr; + cxgb3i_set_private_ipv4addr(dev, sipv4); + } else + c3cn->saddr.sin_addr.s_addr = sipv4; + + c3cn_conn_debug("c3cn 0x%p, %u.%u.%u.%u,%u-%u.%u.%u.%u,%u SYN_SENT.\n", + c3cn, NIPQUAD(c3cn->saddr.sin_addr.s_addr), + ntohs(c3cn->saddr.sin_port), + NIPQUAD(c3cn->daddr.sin_addr.s_addr), + ntohs(c3cn->daddr.sin_port)); + + c3cn_set_state(c3cn, C3CN_STATE_CONNECTING); + if (!initiate_act_open(c3cn, dev)) + return 0; + + /* + * If we get here, we don't have an offload connection so simply + * return a failure. + */ + err = -ENOTSUPP; + + /* + * This trashes the connection and releases the local port, + * if necessary. + */ + c3cn_conn_debug("c3cn 0x%p -> CLOSED.\n", c3cn); + c3cn_set_state(c3cn, C3CN_STATE_CLOSED); + ip_rt_put(rt); + c3cn_put_port(c3cn); + c3cn->daddr.sin_port = 0; + return err; +} + +/** + * cxgb3i_c3cn_rx_credits - ack received tcp data. + * @c3cn: iscsi tcp connection + * @copied: # of bytes processed + * + * Called after some received data has been read. It returns RX credits + * to the HW for the amount of data processed. + */ +void cxgb3i_c3cn_rx_credits(struct s3_conn *c3cn, int copied) +{ + struct t3cdev *cdev; + int must_send; + u32 credits, dack = 0; + + if (c3cn->state != C3CN_STATE_ESTABLISHED) + return; + + credits = c3cn->copied_seq - c3cn->rcv_wup; + if (unlikely(!credits)) + return; + + cdev = c3cn->cdev; + + if (unlikely(cxgb3_rx_credit_thres == 0)) + return; + + dack = F_RX_DACK_CHANGE | V_RX_DACK_MODE(1); + + /* + * For coalescing to work effectively ensure the receive window has + * at least 16KB left. + */ + must_send = credits + 16384 >= cxgb3_rcv_win; + + if (must_send || credits >= cxgb3_rx_credit_thres) + c3cn->rcv_wup += send_rx_credits(c3cn, credits, dack); +} + +/** + * cxgb3i_c3cn_send_pdus - send the skbs containing iscsi pdus + * @c3cn: iscsi tcp connection + * @skb: skb contains the iscsi pdu + * + * Add a list of skbs to a connection send queue. The skbs must comply with + * the max size limit of the device and have a headroom of at least + * TX_HEADER_LEN bytes. + * Return # of bytes queued. + */ +int cxgb3i_c3cn_send_pdus(struct s3_conn *c3cn, struct sk_buff *skb) +{ + struct sk_buff *next; + int err, copied = 0; + + spin_lock_bh(&c3cn->lock); + + if (c3cn->state != C3CN_STATE_ESTABLISHED) { + c3cn_tx_debug("c3cn 0x%p, not in est. state %u.\n", + c3cn, c3cn->state); + err = -EAGAIN; + goto out_err; + } + + err = -EPIPE; + if (c3cn->err) { + c3cn_tx_debug("c3cn 0x%p, err %d.\n", c3cn, c3cn->err); + goto out_err; + } + + while (skb) { + int frags = skb_shinfo(skb)->nr_frags + + (skb->len != skb->data_len); + + if (unlikely(skb_headroom(skb) < TX_HEADER_LEN)) { + c3cn_tx_debug("c3cn 0x%p, skb head.\n", c3cn); + err = -EINVAL; + goto out_err; + } + + if (frags >= SKB_WR_LIST_SIZE) { + cxgb3i_log_error("c3cn 0x%p, tx frags %d, len %u,%u.\n", + c3cn, skb_shinfo(skb)->nr_frags, + skb->len, skb->data_len); + err = -EINVAL; + goto out_err; + } + + next = skb->next; + skb->next = NULL; + skb_entail(c3cn, skb, C3CB_FLAG_NO_APPEND | C3CB_FLAG_NEED_HDR); + copied += skb->len; + c3cn->write_seq += skb->len + ulp_extra_len(skb); + skb = next; + } +done: + if (likely(skb_queue_len(&c3cn->write_queue))) + c3cn_push_tx_frames(c3cn, 1); + spin_unlock_bh(&c3cn->lock); + return copied; + +out_err: + if (copied == 0 && err == -EPIPE) + copied = c3cn->err ? c3cn->err : -EPIPE; + goto done; +} + +static void sdev_data_cleanup(struct cxgb3i_sdev_data *cdata) +{ + struct adap_ports *ports = &cdata->ports; + int i; + + for (i = 0; i < ports->nports; i++) + NDEV2CDATA(ports->lldevs[i]) = NULL; + cxgb3i_free_big_mem(cdata); +} + +void cxgb3i_sdev_cleanup(void) +{ + struct cxgb3i_sdev_data *cdata; + + write_lock(&cdata_rwlock); + list_for_each_entry(cdata, &cdata_list, list) { + list_del(&cdata->list); + sdev_data_cleanup(cdata); + } + write_unlock(&cdata_rwlock); +} + +int cxgb3i_sdev_init(cxgb3_cpl_handler_func *cpl_handlers) +{ + cpl_handlers[CPL_ACT_ESTABLISH] = do_act_establish; + cpl_handlers[CPL_ACT_OPEN_RPL] = do_act_open_rpl; + cpl_handlers[CPL_PEER_CLOSE] = do_peer_close; + cpl_handlers[CPL_ABORT_REQ_RSS] = do_abort_req; + cpl_handlers[CPL_ABORT_RPL_RSS] = do_abort_rpl; + cpl_handlers[CPL_CLOSE_CON_RPL] = do_close_con_rpl; + cpl_handlers[CPL_TX_DMA_ACK] = do_wr_ack; + cpl_handlers[CPL_ISCSI_HDR] = do_iscsi_hdr; + + if (cxgb3_max_connect > CXGB3I_MAX_CONN) + cxgb3_max_connect = CXGB3I_MAX_CONN; + return 0; +} + +/** + * cxgb3i_sdev_add - allocate and initialize resources for each adapter found + * @cdev: t3cdev adapter + * @client: cxgb3 driver client + */ +void cxgb3i_sdev_add(struct t3cdev *cdev, struct cxgb3_client *client) +{ + struct cxgb3i_sdev_data *cdata; + struct ofld_page_info rx_page_info; + unsigned int wr_len; + int mapsize = DIV_ROUND_UP(cxgb3_max_connect, + 8 * sizeof(unsigned long)); + int i; + + cdata = cxgb3i_alloc_big_mem(sizeof(*cdata) + mapsize, GFP_KERNEL); + if (!cdata) + return; + + if (cdev->ctl(cdev, GET_WR_LEN, &wr_len) < 0 || + cdev->ctl(cdev, GET_PORTS, &cdata->ports) < 0 || + cdev->ctl(cdev, GET_RX_PAGE_INFO, &rx_page_info) < 0) + goto free_cdata; + + s3_init_wr_tab(wr_len); + + INIT_LIST_HEAD(&cdata->list); + cdata->cdev = cdev; + cdata->client = client; + + for (i = 0; i < cdata->ports.nports; i++) + NDEV2CDATA(cdata->ports.lldevs[i]) = cdata; + + write_lock(&cdata_rwlock); + list_add_tail(&cdata->list, &cdata_list); + write_unlock(&cdata_rwlock); + + return; + +free_cdata: + cxgb3i_free_big_mem(cdata); +} + +/** + * cxgb3i_sdev_remove - free the allocated resources for the adapter + * @cdev: t3cdev adapter + */ +void cxgb3i_sdev_remove(struct t3cdev *cdev) +{ + struct cxgb3i_sdev_data *cdata = CXGB3_SDEV_DATA(cdev); + + write_lock(&cdata_rwlock); + list_del(&cdata->list); + write_unlock(&cdata_rwlock); + + sdev_data_cleanup(cdata); +} |