diff options
author | Dan Williams <dan.j.williams@intel.com> | 2011-11-18 01:59:54 (GMT) |
---|---|---|
committer | James Bottomley <JBottomley@Parallels.com> | 2012-02-29 18:49:36 (GMT) |
commit | 36a399473902a57218dc493c5a814708a56b73ab (patch) | |
tree | e64a9f136bbacaded9fdd3d3d39c342953d9be34 /drivers/scsi/libsas | |
parent | 50824d6c5657ce340e3911171865a8d99fdd8eba (diff) | |
download | linux-fsl-qoriq-36a399473902a57218dc493c5a814708a56b73ab.tar.xz |
[SCSI] libsas: poll for ata device readiness after reset
Use ata_wait_after_reset() to poll for link recovery after a reset.
This combined with sas_ha->eh_mutex prevents expander rediscovery from
probing phys in an intermediate state. Local discovery does not have a
mechanism to filter link status changes during this timeout, so it
remains the responsibility of lldds to prevent premature port teardown.
Although once all lldd's support ->lldd_ata_check_ready() that could be
used as a gate to local port teardown.
The signature fis is re-transmitted when the link comes back so we
should be revalidating the ata device class, but that is left to a future
patch.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Diffstat (limited to 'drivers/scsi/libsas')
-rw-r--r-- | drivers/scsi/libsas/sas_ata.c | 104 | ||||
-rw-r--r-- | drivers/scsi/libsas/sas_expander.c | 10 | ||||
-rw-r--r-- | drivers/scsi/libsas/sas_internal.h | 3 |
3 files changed, 82 insertions, 35 deletions
diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 4beca66..5fdb63a 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -272,39 +272,84 @@ static bool sas_ata_qc_fill_rtf(struct ata_queued_cmd *qc) return true; } -static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class, - unsigned long deadline) +static struct sas_internal *dev_to_sas_internal(struct domain_device *dev) +{ + return to_sas_internal(dev->port->ha->core.shost->transportt); +} + +static int smp_ata_check_ready(struct ata_link *link) { + int res; + u8 addr[8]; struct ata_port *ap = link->ap; struct domain_device *dev = ap->private_data; - struct sas_internal *i = - to_sas_internal(dev->port->ha->core.shost->transportt); - int res = TMF_RESP_FUNC_FAILED; - int ret = 0; + struct domain_device *ex_dev = dev->parent; + struct sas_phy *phy = sas_find_local_phy(dev); - if (i->dft->lldd_I_T_nexus_reset) - res = i->dft->lldd_I_T_nexus_reset(dev); + res = sas_get_phy_attached_sas_addr(ex_dev, phy->number, addr); + /* break the wait early if the expander is unreachable, + * otherwise keep polling + */ + if (res == -ECOMM) + return res; + if (res != SMP_RESP_FUNC_ACC || SAS_ADDR(addr) == 0) + return 0; + else + return 1; +} - if (res != TMF_RESP_FUNC_COMPLETE) { - SAS_DPRINTK("%s: Unable to reset I T nexus?\n", __func__); - ret = -EAGAIN; +static int local_ata_check_ready(struct ata_link *link) +{ + struct ata_port *ap = link->ap; + struct domain_device *dev = ap->private_data; + struct sas_internal *i = dev_to_sas_internal(dev); + + if (i->dft->lldd_ata_check_ready) + return i->dft->lldd_ata_check_ready(dev); + else { + /* lldd's that don't implement 'ready' checking get the + * old default behavior of not coordinating reset + * recovery with libata + */ + return 1; } +} +static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + int ret = 0, res; + struct ata_port *ap = link->ap; + int (*check_ready)(struct ata_link *link); + struct domain_device *dev = ap->private_data; + struct sas_phy *phy = sas_find_local_phy(dev); + struct sas_internal *i = dev_to_sas_internal(dev); + + res = i->dft->lldd_I_T_nexus_reset(dev); + + if (res != TMF_RESP_FUNC_COMPLETE) + SAS_DPRINTK("%s: Unable to reset ata device?\n", __func__); + + if (scsi_is_sas_phy_local(phy)) + check_ready = local_ata_check_ready; + else + check_ready = smp_ata_check_ready; + + ret = ata_wait_after_reset(link, deadline, check_ready); + if (ret && ret != -EAGAIN) + ata_link_err(link, "COMRESET failed (errno=%d)\n", ret); + + /* XXX: if the class changes during the reset the upper layer + * should be informed, if the device has gone away we assume + * libsas will eventually delete it + */ switch (dev->sata_dev.command_set) { - case ATA_COMMAND_SET: - SAS_DPRINTK("%s: Found ATA device.\n", __func__); - *class = ATA_DEV_ATA; - break; - case ATAPI_COMMAND_SET: - SAS_DPRINTK("%s: Found ATAPI device.\n", __func__); - *class = ATA_DEV_ATAPI; - break; - default: - SAS_DPRINTK("%s: Unknown SATA command set: %d.\n", - __func__, - dev->sata_dev.command_set); - *class = ATA_DEV_UNKNOWN; - break; + case ATA_COMMAND_SET: + *class = ATA_DEV_ATA; + break; + case ATAPI_COMMAND_SET: + *class = ATA_DEV_ATAPI; + break; } ap->cbl = ATA_CBL_SATA; @@ -316,8 +361,7 @@ static int sas_ata_soft_reset(struct ata_link *link, unsigned int *class, { struct ata_port *ap = link->ap; struct domain_device *dev = ap->private_data; - struct sas_internal *i = - to_sas_internal(dev->port->ha->core.shost->transportt); + struct sas_internal *i = dev_to_sas_internal(dev); int res = TMF_RESP_FUNC_FAILED; int ret = 0; @@ -355,8 +399,7 @@ static int sas_ata_soft_reset(struct ata_link *link, unsigned int *class, */ static void sas_ata_internal_abort(struct sas_task *task) { - struct sas_internal *si = - to_sas_internal(task->dev->port->ha->core.shost->transportt); + struct sas_internal *si = dev_to_sas_internal(task->dev); unsigned long flags; int res; @@ -425,8 +468,7 @@ static void sas_ata_post_internal(struct ata_queued_cmd *qc) static void sas_ata_set_dmamode(struct ata_port *ap, struct ata_device *ata_dev) { struct domain_device *dev = ap->private_data; - struct sas_internal *i = - to_sas_internal(dev->port->ha->core.shost->transportt); + struct sas_internal *i = dev_to_sas_internal(dev); if (i->dft->lldd_ata_set_dmamode) i->dft->lldd_ata_set_dmamode(dev); diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 7c59f97..32e417e 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -125,7 +125,11 @@ static int smp_execute_task(struct domain_device *dev, void *req, int req_size, task->task_status.stat == SAS_DATA_OVERRUN) { res = -EMSGSIZE; break; - } else { + } + if (task->task_status.resp == SAS_TASK_UNDELIVERED && + task->task_status.stat == SAS_DEVICE_UNKNOWN) + break; + else { SAS_DPRINTK("%s: task to dev %016llx response: 0x%x " "status 0x%x\n", __func__, SAS_ADDR(dev->sas_addr), @@ -1648,8 +1652,8 @@ static int sas_get_phy_change_count(struct domain_device *dev, return res; } -static int sas_get_phy_attached_sas_addr(struct domain_device *dev, - int phy_id, u8 *attached_sas_addr) +int sas_get_phy_attached_sas_addr(struct domain_device *dev, int phy_id, + u8 *attached_sas_addr) { int res; struct smp_resp *disc_resp; diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index 9e960b2..a9a3bb9 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -89,7 +89,8 @@ int sas_smp_get_phy_events(struct sas_phy *phy); struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy); struct domain_device *sas_ex_to_ata(struct domain_device *ex_dev, int phy_id); - +int sas_get_phy_attached_sas_addr(struct domain_device *dev, int phy_id, + u8 *attached_sas_addr); void sas_hae_reset(struct work_struct *work); void sas_free_device(struct kref *kref); |