diff options
author | Seokmann Ju <seokmann.ju@qlogic.com> | 2007-07-05 20:16:51 (GMT) |
---|---|---|
committer | James Bottomley <jejb@mulgrave.localdomain> | 2007-07-15 00:08:05 (GMT) |
commit | 2c3dfe3f6ad8daff5acdb01713e4f2b116e78136 (patch) | |
tree | 8d95e2356c0f5121ceab48ab564d2796b6530d29 /drivers/scsi/qla2xxx/qla_init.c | |
parent | 968a5763fb7247feb0e69573a2975a7a0c094267 (diff) | |
download | linux-fsl-qoriq-2c3dfe3f6ad8daff5acdb01713e4f2b116e78136.tar.xz |
[SCSI] qla2xxx: add support for NPIV
Following patch adds support for NPIV (N-Port ID Virtualization) to the
qla2xxx.
- supported within switched-fabric topologies only.
- supports up to 63 virtual ports on each physical port.
Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_init.c')
-rw-r--r-- | drivers/scsi/qla2xxx/qla_init.c | 166 |
1 files changed, 146 insertions, 20 deletions
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 2a45aec..bd95f7d 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -899,6 +899,10 @@ qla2x00_setup_chip(scsi_qla_host_t *ha) &ha->fw_subminor_version, &ha->fw_attributes, &ha->fw_memory_size); qla2x00_resize_request_q(ha); + ha->flags.npiv_supported = 0; + if (IS_QLA24XX(ha) && + (ha->fw_attributes & BIT_2)) + ha->flags.npiv_supported = 1; if (ql2xallocfwdump) qla2x00_alloc_fw_dump(ha); @@ -1101,6 +1105,8 @@ qla2x00_init_rings(scsi_qla_host_t *ha) int rval; unsigned long flags = 0; int cnt; + struct mid_init_cb_24xx *mid_init_cb = + (struct mid_init_cb_24xx *) ha->init_cb; spin_lock_irqsave(&ha->hardware_lock, flags); @@ -1132,6 +1138,10 @@ qla2x00_init_rings(scsi_qla_host_t *ha) ha->isp_ops.update_fw_options(ha); DEBUG(printk("scsi(%ld): Issue init firmware.\n", ha->host_no)); + + mid_init_cb->count = MAX_NUM_VPORT_FABRIC; + ha->max_npiv_vports = MAX_NUM_VPORT_FABRIC; + rval = qla2x00_init_firmware(ha, ha->init_cb_size); if (rval) { DEBUG2_3(printk("scsi(%ld): Init firmware **** FAILED ****.\n", @@ -1263,6 +1273,7 @@ qla2x00_configure_hba(scsi_qla_host_t *ha) int rval; uint16_t loop_id; uint16_t topo; + uint16_t sw_cap; uint8_t al_pa; uint8_t area; uint8_t domain; @@ -1270,7 +1281,7 @@ qla2x00_configure_hba(scsi_qla_host_t *ha) /* Get host addresses. */ rval = qla2x00_get_adapter_id(ha, - &loop_id, &al_pa, &area, &domain, &topo); + &loop_id, &al_pa, &area, &domain, &topo, &sw_cap); if (rval != QLA_SUCCESS) { if (LOOP_TRANSITION(ha) || atomic_read(&ha->loop_down_timer) || (rval == QLA_COMMAND_ERROR && loop_id == 0x7)) { @@ -1295,6 +1306,7 @@ qla2x00_configure_hba(scsi_qla_host_t *ha) /* initialize */ ha->min_external_loopid = SNS_FIRST_LOOP_ID; ha->operating_mode = LOOP; + ha->switch_cap = 0; switch (topo) { case 0: @@ -1307,6 +1319,7 @@ qla2x00_configure_hba(scsi_qla_host_t *ha) case 1: DEBUG3(printk("scsi(%ld): HBA in FL topology.\n", ha->host_no)); + ha->switch_cap = sw_cap; ha->current_topology = ISP_CFG_FL; strcpy(connect_type, "(FL_Port)"); break; @@ -1322,6 +1335,7 @@ qla2x00_configure_hba(scsi_qla_host_t *ha) case 3: DEBUG3(printk("scsi(%ld): HBA in F P2P topology.\n", ha->host_no)); + ha->switch_cap = sw_cap; ha->operating_mode = P2P; ha->current_topology = ISP_CFG_F; strcpy(connect_type, "(F_Port)"); @@ -1743,7 +1757,6 @@ qla2x00_rport_del(void *data) spin_unlock_irqrestore(&fcport->rport_lock, flags); if (rport) fc_remote_port_delete(rport); - } /** @@ -1765,6 +1778,7 @@ qla2x00_alloc_fcport(scsi_qla_host_t *ha, gfp_t flags) /* Setup fcport template structure. */ memset(fcport, 0, sizeof (fc_port_t)); fcport->ha = ha; + fcport->vp_idx = ha->vp_idx; fcport->port_type = FCT_UNKNOWN; fcport->loop_id = FC_NO_LOOP_ID; atomic_set(&fcport->state, FCS_UNCONFIGURED); @@ -1911,6 +1925,7 @@ qla2x00_configure_local_loop(scsi_qla_host_t *ha) char *id_iter; uint16_t loop_id; uint8_t domain, area, al_pa; + scsi_qla_host_t *pha = to_qla_parent(ha); found_devs = 0; new_fcport = NULL; @@ -1942,7 +1957,10 @@ qla2x00_configure_local_loop(scsi_qla_host_t *ha) /* * Mark local devices that were present with FCF_DEVICE_LOST for now. */ - list_for_each_entry(fcport, &ha->fcports, list) { + list_for_each_entry(fcport, &pha->fcports, list) { + if (fcport->vp_idx != ha->vp_idx) + continue; + if (atomic_read(&fcport->state) == FCS_ONLINE && fcport->port_type != FCT_BROADCAST && (fcport->flags & FCF_FABRIC_DEVICE) == 0) { @@ -1988,6 +2006,7 @@ qla2x00_configure_local_loop(scsi_qla_host_t *ha) new_fcport->d_id.b.area = area; new_fcport->d_id.b.al_pa = al_pa; new_fcport->loop_id = loop_id; + new_fcport->vp_idx = ha->vp_idx; rval2 = qla2x00_get_port_database(ha, new_fcport, 0); if (rval2 != QLA_SUCCESS) { DEBUG2(printk("scsi(%ld): Failed to retrieve fcport " @@ -2003,7 +2022,10 @@ qla2x00_configure_local_loop(scsi_qla_host_t *ha) /* Check for matching device in port list. */ found = 0; fcport = NULL; - list_for_each_entry(fcport, &ha->fcports, list) { + list_for_each_entry(fcport, &pha->fcports, list) { + if (fcport->vp_idx != ha->vp_idx) + continue; + if (memcmp(new_fcport->port_name, fcport->port_name, WWN_SIZE)) continue; @@ -2023,7 +2045,13 @@ qla2x00_configure_local_loop(scsi_qla_host_t *ha) if (!found) { /* New device, add to fcports list. */ new_fcport->flags &= ~FCF_PERSISTENT_BOUND; - list_add_tail(&new_fcport->list, &ha->fcports); + if (ha->parent) { + new_fcport->ha = ha; + new_fcport->vp_idx = ha->vp_idx; + list_add_tail(&new_fcport->vp_fcport, + &ha->vp_fcports); + } + list_add_tail(&new_fcport->list, &pha->fcports); /* Allocate a new replacement fcport. */ fcport = new_fcport; @@ -2199,11 +2227,13 @@ qla2x00_reg_remote_port(scsi_qla_host_t *ha, fc_port_t *fcport) void qla2x00_update_fcport(scsi_qla_host_t *ha, fc_port_t *fcport) { + scsi_qla_host_t *pha = to_qla_parent(ha); + fcport->ha = ha; fcport->login_retry = 0; - fcport->port_login_retry_count = ha->port_down_retry_count * + fcport->port_login_retry_count = pha->port_down_retry_count * PORT_RETRY_TIME; - atomic_set(&fcport->port_down_timer, ha->port_down_retry_count * + atomic_set(&fcport->port_down_timer, pha->port_down_retry_count * PORT_RETRY_TIME); fcport->flags &= ~FCF_LOGIN_NEEDED; @@ -2234,6 +2264,7 @@ qla2x00_configure_fabric(scsi_qla_host_t *ha) uint16_t mb[MAILBOX_REGISTER_COUNT]; uint16_t loop_id; LIST_HEAD(new_fcports); + scsi_qla_host_t *pha = to_qla_parent(ha); /* If FL port exists, then SNS is present */ if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) @@ -2307,7 +2338,10 @@ qla2x00_configure_fabric(scsi_qla_host_t *ha) * Logout all previous fabric devices marked lost, except * tape devices. */ - list_for_each_entry(fcport, &ha->fcports, list) { + list_for_each_entry(fcport, &pha->fcports, list) { + if (fcport->vp_idx !=ha->vp_idx) + continue; + if (test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) break; @@ -2332,13 +2366,16 @@ qla2x00_configure_fabric(scsi_qla_host_t *ha) } /* Starting free loop ID. */ - next_loopid = ha->min_external_loopid; + next_loopid = pha->min_external_loopid; /* * Scan through our port list and login entries that need to be * logged in. */ - list_for_each_entry(fcport, &ha->fcports, list) { + list_for_each_entry(fcport, &pha->fcports, list) { + if (fcport->vp_idx != ha->vp_idx) + continue; + if (atomic_read(&ha->loop_down_timer) || test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) break; @@ -2380,11 +2417,18 @@ qla2x00_configure_fabric(scsi_qla_host_t *ha) break; } - /* Remove device from the new list and add it to DB */ - list_move_tail(&fcport->list, &ha->fcports); - /* Login and update database */ qla2x00_fabric_dev_login(ha, fcport, &next_loopid); + + if (ha->parent) { + fcport->ha = ha; + fcport->vp_idx = ha->vp_idx; + list_add_tail(&fcport->vp_fcport, + &ha->vp_fcports); + list_move_tail(&fcport->list, + &ha->parent->fcports); + } else + list_move_tail(&fcport->list, &ha->fcports); } } while (0); @@ -2428,6 +2472,11 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports) int swl_idx; int first_dev, last_dev; port_id_t wrap, nxt_d_id; + int vp_index; + int empty_vp_index; + int found_vp; + scsi_qla_host_t *vha; + scsi_qla_host_t *pha = to_qla_parent(ha); rval = QLA_SUCCESS; @@ -2461,13 +2510,13 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports) return (QLA_MEMORY_ALLOC_FAILED); } new_fcport->flags |= (FCF_FABRIC_DEVICE | FCF_LOGIN_NEEDED); - + new_fcport->vp_idx = ha->vp_idx; /* Set start port ID scan at adapter ID. */ first_dev = 1; last_dev = 0; /* Starting free loop ID. */ - loop_id = ha->min_external_loopid; + loop_id = pha->min_external_loopid; for (; loop_id <= ha->last_loop_id; loop_id++) { if (qla2x00_is_reserved_id(ha, loop_id)) continue; @@ -2521,10 +2570,42 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports) break; } - /* Bypass if host adapter. */ - if (new_fcport->d_id.b24 == ha->d_id.b24) + /* Bypass if same physical adapter. */ + if (new_fcport->d_id.b24 == pha->d_id.b24) continue; + /* Bypass virtual ports of the same host. */ + if (pha->num_vhosts) { + vp_index = find_next_bit( + (unsigned long *)pha->vp_idx_map, + MAX_MULTI_ID_FABRIC + 1, 1); + + for (;vp_index <= MAX_MULTI_ID_FABRIC; + vp_index = find_next_bit( + (unsigned long *)pha->vp_idx_map, + MAX_MULTI_ID_FABRIC + 1, vp_index + 1)) { + empty_vp_index = 1; + found_vp = 0; + list_for_each_entry(vha, &pha->vp_list, + vp_list) { + if (vp_index == vha->vp_idx) { + empty_vp_index = 0; + found_vp = 1; + break; + } + } + + if (empty_vp_index) + continue; + + if (found_vp && + new_fcport->d_id.b24 == vha->d_id.b24) + break; + } + if (vp_index <= MAX_MULTI_ID_FABRIC) + continue; + } + /* Bypass if same domain and area of adapter. */ if (((new_fcport->d_id.b24 & 0xffff00) == (ha->d_id.b24 & 0xffff00)) && ha->current_topology == @@ -2537,7 +2618,9 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports) /* Locate matching device in database. */ found = 0; - list_for_each_entry(fcport, &ha->fcports, list) { + list_for_each_entry(fcport, &pha->fcports, list) { + if (new_fcport->vp_idx != fcport->vp_idx) + continue; if (memcmp(new_fcport->port_name, fcport->port_name, WWN_SIZE)) continue; @@ -2605,6 +2688,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *ha, struct list_head *new_fcports) } new_fcport->flags |= (FCF_FABRIC_DEVICE | FCF_LOGIN_NEEDED); new_fcport->d_id.b24 = nxt_d_id.b24; + new_fcport->vp_idx = ha->vp_idx; } kfree(swl); @@ -2637,6 +2721,7 @@ qla2x00_find_new_loop_id(scsi_qla_host_t *ha, fc_port_t *dev) int found; fc_port_t *fcport; uint16_t first_loop_id; + scsi_qla_host_t *pha = to_qla_parent(ha); rval = QLA_SUCCESS; @@ -2663,7 +2748,7 @@ qla2x00_find_new_loop_id(scsi_qla_host_t *ha, fc_port_t *dev) /* Check for loop ID being already in use. */ found = 0; fcport = NULL; - list_for_each_entry(fcport, &ha->fcports, list) { + list_for_each_entry(fcport, &pha->fcports, list) { if (fcport->loop_id == dev->loop_id && fcport != dev) { /* ID possibly in use */ found++; @@ -2710,6 +2795,7 @@ qla2x00_device_resync(scsi_qla_host_t *ha) uint8_t rscn_out_iter; uint8_t format; port_id_t d_id; + scsi_qla_host_t *pha = to_qla_parent(ha); rval = QLA_RSCNS_HANDLED; @@ -2776,7 +2862,10 @@ qla2x00_device_resync(scsi_qla_host_t *ha) rval = QLA_SUCCESS; - list_for_each_entry(fcport, &ha->fcports, list) { + list_for_each_entry(fcport, &pha->fcports, list) { + if (fcport->vp_idx != ha->vp_idx) + continue; + if ((fcport->flags & FCF_FABRIC_DEVICE) == 0 || (fcport->d_id.b24 & mask) != d_id.b24 || fcport->port_type == FCT_BROADCAST) @@ -3940,3 +4029,40 @@ qla2x00_try_to_stop_firmware(scsi_qla_host_t *ha) ret = qla2x00_stop_firmware(ha); } } + +int +qla24xx_configure_vhba(scsi_qla_host_t *ha) +{ + int rval = QLA_SUCCESS; + uint16_t mb[MAILBOX_REGISTER_COUNT]; + + if (!ha->parent) + return -EINVAL; + + rval = qla2x00_fw_ready(ha); + if (rval == QLA_SUCCESS) { + clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags); + qla2x00_marker(ha, 0, 0, MK_SYNC_ALL); + } + + ha->flags.management_server_logged_in = 0; + + /* Login to SNS first */ + qla24xx_login_fabric(ha, NPH_SNS, 0xff, 0xff, 0xfc, + mb, BIT_1); + if (mb[0] != MBS_COMMAND_COMPLETE) { + DEBUG15(qla_printk(KERN_INFO, ha, + "Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x " + "mb[2]=%x mb[6]=%x mb[7]=%x\n", NPH_SNS, + mb[0], mb[1], mb[2], mb[6], mb[7])); + return (QLA_FUNCTION_FAILED); + } + + atomic_set(&ha->loop_down_timer, 0); + atomic_set(&ha->loop_state, LOOP_UP); + set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags); + set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags); + rval = qla2x00_loop_resync(ha); + + return rval; +} |