diff options
author | Sarang Radke <sarang.radke@qlogic.com> | 2010-05-28 22:08:21 (GMT) |
---|---|---|
committer | James Bottomley <James.Bottomley@suse.de> | 2010-07-27 17:01:22 (GMT) |
commit | 23f2ebd17a13835c5b34994d2c2e5faacc127947 (patch) | |
tree | 2fce122a5ecceffa8c52e334d9dfeee0e33e3e7f /drivers/scsi/qla2xxx | |
parent | 3a6478df74c271cb3be5895b39fddf75e9cef89c (diff) | |
download | linux-fsl-qoriq-23f2ebd17a13835c5b34994d2c2e5faacc127947.tar.xz |
[SCSI] qla2xxx: Add internal loopback support for ISP81xx.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Diffstat (limited to 'drivers/scsi/qla2xxx')
-rw-r--r-- | drivers/scsi/qla2xxx/qla_bsg.c | 196 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_bsg.h | 7 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_def.h | 4 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_gbl.h | 5 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_isr.c | 7 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_mbx.c | 66 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_os.c | 1 |
7 files changed, 269 insertions, 17 deletions
diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c index b905dfe..3a02483 100644 --- a/drivers/scsi/qla2xxx/qla_bsg.c +++ b/drivers/scsi/qla2xxx/qla_bsg.c @@ -483,6 +483,98 @@ done: return rval; } +/* Set the port configuration to enable the + * internal loopback on ISP81XX + */ +static inline int +qla81xx_set_internal_loopback(scsi_qla_host_t *vha, uint16_t *config, + uint16_t *new_config) +{ + int ret = 0; + int rval = 0; + struct qla_hw_data *ha = vha->hw; + + if (!IS_QLA81XX(ha)) + goto done_set_internal; + + new_config[0] = config[0] | (ENABLE_INTERNAL_LOOPBACK << 1); + memcpy(&new_config[1], &config[1], sizeof(uint16_t) * 3) ; + + ha->notify_dcbx_comp = 1; + ret = qla81xx_set_port_config(vha, new_config); + if (ret != QLA_SUCCESS) { + DEBUG2(printk(KERN_ERR + "%s(%lu): Set port config failed\n", + __func__, vha->host_no)); + ha->notify_dcbx_comp = 0; + rval = -EINVAL; + goto done_set_internal; + } + + /* Wait for DCBX complete event */ + if (!wait_for_completion_timeout(&ha->dcbx_comp, (20 * HZ))) { + DEBUG2(qla_printk(KERN_WARNING, ha, + "State change notificaition not received.\n")); + } else + DEBUG2(qla_printk(KERN_INFO, ha, + "State change RECEIVED\n")); + + ha->notify_dcbx_comp = 0; + +done_set_internal: + return rval; +} + +/* Set the port configuration to disable the + * internal loopback on ISP81XX + */ +static inline int +qla81xx_reset_internal_loopback(scsi_qla_host_t *vha, uint16_t *config, + int wait) +{ + int ret = 0; + int rval = 0; + uint16_t new_config[4]; + struct qla_hw_data *ha = vha->hw; + + if (!IS_QLA81XX(ha)) + goto done_reset_internal; + + memset(new_config, 0 , sizeof(new_config)); + if ((config[0] & INTERNAL_LOOPBACK_MASK) >> 1 == + ENABLE_INTERNAL_LOOPBACK) { + new_config[0] = config[0] & ~INTERNAL_LOOPBACK_MASK; + memcpy(&new_config[1], &config[1], sizeof(uint16_t) * 3) ; + + ha->notify_dcbx_comp = wait; + ret = qla81xx_set_port_config(vha, new_config); + if (ret != QLA_SUCCESS) { + DEBUG2(printk(KERN_ERR + "%s(%lu): Set port config failed\n", + __func__, vha->host_no)); + ha->notify_dcbx_comp = 0; + rval = -EINVAL; + goto done_reset_internal; + } + + /* Wait for DCBX complete event */ + if (wait && !wait_for_completion_timeout(&ha->dcbx_comp, + (20 * HZ))) { + DEBUG2(qla_printk(KERN_WARNING, ha, + "State change notificaition not received.\n")); + ha->notify_dcbx_comp = 0; + rval = -EINVAL; + goto done_reset_internal; + } else + DEBUG2(qla_printk(KERN_INFO, ha, + "State change RECEIVED\n")); + + ha->notify_dcbx_comp = 0; + } +done_reset_internal: + return rval; +} + static int qla2x00_process_loopback(struct fc_bsg_job *bsg_job) { @@ -494,6 +586,7 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job) char *type; struct msg_echo_lb elreq; uint16_t response[MAILBOX_REGISTER_COUNT]; + uint16_t config[4], new_config[4]; uint8_t *fw_sts_ptr; uint8_t *req_data = NULL; dma_addr_t req_data_dma; @@ -568,29 +661,102 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job) elreq.options = bsg_job->request->rqst_data.h_vendor.vendor_cmd[1]; - if (ha->current_topology != ISP_CFG_F) { - type = "FC_BSG_HST_VENDOR_LOOPBACK"; + if ((ha->current_topology == ISP_CFG_F || + (IS_QLA81XX(ha) && + le32_to_cpu(*(uint32_t *)req_data) == ELS_OPCODE_BYTE + && req_data_len == MAX_ELS_FRAME_PAYLOAD)) && + elreq.options == EXTERNAL_LOOPBACK) { + type = "FC_BSG_HST_VENDOR_ECHO_DIAG"; DEBUG2(qla_printk(KERN_INFO, ha, - "scsi(%ld) bsg rqst type: %s\n", - vha->host_no, type)); - - command_sent = INT_DEF_LB_LOOPBACK_CMD; - rval = qla2x00_loopback_test(vha, &elreq, response); + "scsi(%ld) bsg rqst type: %s\n", vha->host_no, type)); + command_sent = INT_DEF_LB_ECHO_CMD; + rval = qla2x00_echo_test(vha, &elreq, response); + } else { if (IS_QLA81XX(ha)) { + memset(config, 0, sizeof(config)); + memset(new_config, 0, sizeof(new_config)); + if (qla81xx_get_port_config(vha, config)) { + DEBUG2(printk(KERN_ERR + "%s(%lu): Get port config failed\n", + __func__, vha->host_no)); + bsg_job->reply->reply_payload_rcv_len = 0; + bsg_job->reply->result = (DID_ERROR << 16); + rval = -EPERM; + goto done_free_dma_req; + } + + if (elreq.options != EXTERNAL_LOOPBACK) { + DEBUG2(qla_printk(KERN_INFO, ha, + "Internal: current port config = %x\n", + config[0])); + if (qla81xx_set_internal_loopback(vha, config, + new_config)) { + bsg_job->reply->reply_payload_rcv_len = + 0; + bsg_job->reply->result = + (DID_ERROR << 16); + rval = -EPERM; + goto done_free_dma_req; + } + } else { + /* For external loopback to work + * ensure internal loopback is disabled + */ + if (qla81xx_reset_internal_loopback(vha, + config, 1)) { + bsg_job->reply->reply_payload_rcv_len = + 0; + bsg_job->reply->result = + (DID_ERROR << 16); + rval = -EPERM; + goto done_free_dma_req; + } + } + + type = "FC_BSG_HST_VENDOR_LOOPBACK"; + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld) bsg rqst type: %s\n", + vha->host_no, type)); + + command_sent = INT_DEF_LB_LOOPBACK_CMD; + rval = qla2x00_loopback_test(vha, &elreq, response); + + if (new_config[1]) { + /* Revert back to original port config + * Also clear internal loopback + */ + qla81xx_reset_internal_loopback(vha, + new_config, 0); + } + if (response[0] == MBS_COMMAND_ERROR && - response[1] == MBS_LB_RESET) { + response[1] == MBS_LB_RESET) { DEBUG2(printk(KERN_ERR "%s(%ld): ABORTing " - "ISP\n", __func__, vha->host_no)); + "ISP\n", __func__, vha->host_no)); set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); qla2xxx_wake_dpc(vha); + qla2x00_wait_for_chip_reset(vha); + /* Also reset the MPI */ + if (qla81xx_restart_mpi_firmware(vha) != + QLA_SUCCESS) { + qla_printk(KERN_INFO, ha, + "MPI reset failed for host%ld.\n", + vha->host_no); + } + + bsg_job->reply->reply_payload_rcv_len = 0; + bsg_job->reply->result = (DID_ERROR << 16); + rval = -EIO; + goto done_free_dma_req; } + } else { + type = "FC_BSG_HST_VENDOR_LOOPBACK"; + DEBUG2(qla_printk(KERN_INFO, ha, + "scsi(%ld) bsg rqst type: %s\n", + vha->host_no, type)); + command_sent = INT_DEF_LB_LOOPBACK_CMD; + rval = qla2x00_loopback_test(vha, &elreq, response); } - } else { - type = "FC_BSG_HST_VENDOR_ECHO_DIAG"; - DEBUG2(qla_printk(KERN_INFO, ha, - "scsi(%ld) bsg rqst type: %s\n", vha->host_no, type)); - command_sent = INT_DEF_LB_ECHO_CMD; - rval = qla2x00_echo_test(vha, &elreq, response); } if (rval) { diff --git a/drivers/scsi/qla2xxx/qla_bsg.h b/drivers/scsi/qla2xxx/qla_bsg.h index 76ed92d..1f096da 100644 --- a/drivers/scsi/qla2xxx/qla_bsg.h +++ b/drivers/scsi/qla2xxx/qla_bsg.h @@ -19,6 +19,13 @@ #define INT_DEF_LB_LOOPBACK_CMD 0 #define INT_DEF_LB_ECHO_CMD 1 +/* Loopback related definations */ +#define EXTERNAL_LOOPBACK 0xF2 +#define ENABLE_INTERNAL_LOOPBACK 0x02 +#define INTERNAL_LOOPBACK_MASK 0x000E +#define MAX_ELS_FRAME_PAYLOAD 252 +#define ELS_OPCODE_BYTE 0x10 + /* BSG Vendor specific definations */ #define A84_ISSUE_WRITE_TYPE_CMD 0 #define A84_ISSUE_READ_TYPE_CMD 1 diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index f8239bf..2895855 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -714,6 +714,8 @@ typedef struct { #define MBC_SEND_RNFT_ELS 0x5e /* Send RNFT ELS request */ #define MBC_GET_LINK_PRIV_STATS 0x6d /* Get link & private data. */ #define MBC_SET_VENDOR_ID 0x76 /* Set Vendor ID. */ +#define MBC_SET_PORT_CONFIG 0x122 /* Set port configuration */ +#define MBC_GET_PORT_CONFIG 0x123 /* Get port configuration */ /* Firmware return data sizes */ #define FCAL_MAP_SIZE 128 @@ -2631,6 +2633,8 @@ struct qla_hw_data { struct mutex vport_lock; /* Virtual port synchronization */ struct completion mbx_cmd_comp; /* Serialize mbx access */ struct completion mbx_intr_comp; /* Used for completion notification */ + struct completion dcbx_comp; /* For set port config notification */ + int notify_dcbx_comp; /* Basic firmware related information. */ uint16_t fw_major_version; diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 2247ef87..7ae2ee4 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -357,6 +357,11 @@ qla2x00_write_ram_word(scsi_qla_host_t *, uint32_t, uint32_t); extern int qla2x00_get_data_rate(scsi_qla_host_t *); extern int qla24xx_set_fcp_prio(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t *); +extern int +qla81xx_get_port_config(scsi_qla_host_t *, uint16_t *); + +extern int +qla81xx_set_port_config(scsi_qla_host_t *, uint16_t *); /* * Global Function Prototypes in qla_isr.c source file. diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 912befd..e51fc5f 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -545,10 +545,13 @@ skip_rio: if (IS_QLA2100(ha)) break; - if (IS_QLA8XXX_TYPE(ha)) + if (IS_QLA8XXX_TYPE(ha)) { DEBUG2(printk("scsi(%ld): DCBX Completed -- %04x %04x " "%04x\n", vha->host_no, mb[1], mb[2], mb[3])); - else + if (ha->notify_dcbx_comp) + complete(&ha->dcbx_comp); + + } else DEBUG2(printk("scsi(%ld): Asynchronous P2P MODE " "received.\n", vha->host_no)); diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 043f808..10f4815 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -3950,6 +3950,72 @@ qla2x00_get_data_rate(scsi_qla_host_t *vha) } int +qla81xx_get_port_config(scsi_qla_host_t *vha, uint16_t *mb) +{ + int rval; + mbx_cmd_t mc; + mbx_cmd_t *mcp = &mc; + struct qla_hw_data *ha = vha->hw; + + DEBUG11(printk(KERN_INFO + "%s(%ld): entered.\n", __func__, vha->host_no)); + + if (!IS_QLA81XX(ha)) + return QLA_FUNCTION_FAILED; + mcp->mb[0] = MBC_GET_PORT_CONFIG; + mcp->out_mb = MBX_0; + mcp->in_mb = MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; + mcp->tov = MBX_TOV_SECONDS; + mcp->flags = 0; + + rval = qla2x00_mailbox_command(vha, mcp); + + if (rval != QLA_SUCCESS) { + DEBUG2_3_11(printk(KERN_WARNING + "%s(%ld): failed=%x (%x).\n", __func__, + vha->host_no, rval, mcp->mb[0])); + } else { + /* Copy all bits to preserve original value */ + memcpy(mb, &mcp->mb[1], sizeof(uint16_t) * 4); + + DEBUG11(printk(KERN_INFO + "%s(%ld): done.\n", __func__, vha->host_no)); + } + return rval; +} + +int +qla81xx_set_port_config(scsi_qla_host_t *vha, uint16_t *mb) +{ + int rval; + mbx_cmd_t mc; + mbx_cmd_t *mcp = &mc; + + DEBUG11(printk(KERN_INFO + "%s(%ld): entered.\n", __func__, vha->host_no)); + + mcp->mb[0] = MBC_SET_PORT_CONFIG; + /* Copy all bits to preserve original setting */ + memcpy(&mcp->mb[1], mb, sizeof(uint16_t) * 4); + mcp->out_mb = MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; + mcp->in_mb = MBX_0; + mcp->tov = MBX_TOV_SECONDS; + mcp->flags = 0; + rval = qla2x00_mailbox_command(vha, mcp); + + if (rval != QLA_SUCCESS) { + DEBUG2_3_11(printk(KERN_WARNING + "%s(%ld): failed=%x (%x).\n", __func__, + vha->host_no, rval, mcp->mb[0])); + } else + DEBUG11(printk(KERN_INFO + "%s(%ld): done.\n", __func__, vha->host_no)); + + return rval; +} + + +int qla24xx_set_fcp_prio(scsi_qla_host_t *vha, uint16_t loop_id, uint16_t priority, uint16_t *mb) { diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 9e65629..fa59181 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -2128,6 +2128,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) init_completion(&ha->mbx_cmd_comp); complete(&ha->mbx_cmd_comp); init_completion(&ha->mbx_intr_comp); + init_completion(&ha->dcbx_comp); set_bit(0, (unsigned long *) ha->vp_idx_map); |