Merge with /shiny/git/linux-2.6/.git

5 files changed, 48 insertions, 19 deletions

diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index de26cf7..7911912 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -94,12 +94,42 @@ void smc1_lineif(struct uart_cpm_port *pinfo)
 		((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits;
 	}
 
+#ifdef CONFIG_MPC885ADS
+	/* Enable SMC1 transceivers */
+	{
+		volatile uint __iomem *bcsr1 = ioremap(BCSR1, 4);
+		uint tmp;
+
+		tmp = in_be32(bcsr1);
+		tmp &= ~BCSR1_RS232EN_1;
+		out_be32(bcsr1, tmp);
+		iounmap(bcsr1);
+	}
+#endif
+
 	pinfo->brg = 1;
 }
 
 void smc2_lineif(struct uart_cpm_port *pinfo)
 {
-	/* XXX SMC2: insert port configuration here */
+#ifdef CONFIG_MPC885ADS
+	volatile cpm8xx_t *cp = cpmp;
+	volatile uint __iomem *bcsr1;
+	uint tmp;
+
+	cp->cp_pepar |= 0x00000c00;
+	cp->cp_pedir &= ~0x00000c00;
+	cp->cp_peso &= ~0x00000400;
+	cp->cp_peso |= 0x00000800;
+
+	/* Enable SMC2 transceivers */
+	bcsr1 = ioremap(BCSR1, 4);
+	tmp = in_be32(bcsr1);
+	tmp &= ~BCSR1_RS232EN_2;
+	out_be32(bcsr1, tmp);
+	iounmap(bcsr1);
+#endif
+
 	pinfo->brg = 2;
 }
 
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 1c9f716..7db2f37 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -1545,7 +1545,7 @@ static void pmz_dispose_port(struct uart_pmac_port *uap)
 /*
  * Called upon match with an escc node in the devive-tree.
  */
-static int pmz_attach(struct macio_dev *mdev, const struct of_match *match)
+static int pmz_attach(struct macio_dev *mdev, const struct of_device_id *match)
 {
 	int i;
 	
@@ -1850,20 +1850,17 @@ err_out:
 	return rc;
 }
 
-static struct of_match pmz_match[] = 
+static struct of_device_id pmz_match[] = 
 {
 	{
 	.name 		= "ch-a",
-	.type		= OF_ANY_MATCH,
-	.compatible	= OF_ANY_MATCH
 	},
 	{
 	.name 		= "ch-b",
-	.type		= OF_ANY_MATCH,
-	.compatible	= OF_ANY_MATCH
 	},
 	{},
 };
+MODULE_DEVICE_TABLE (of, pmz_match);
 
 static struct macio_driver pmz_driver = 
 {
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 5c46784..7365d4b 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -522,14 +522,11 @@ static void s3c24xx_serial_shutdown(struct uart_port *port)
 static int s3c24xx_serial_startup(struct uart_port *port)
 {
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
-	unsigned long flags;
 	int ret;
 
 	dbg("s3c24xx_serial_startup: port=%p (%08lx,%p)\n",
 	    port->mapbase, port->membase);
 
-	local_irq_save(flags);
-
 	rx_enabled(port) = 1;
 
 	ret = request_irq(RX_IRQ(port),
@@ -563,12 +560,10 @@ static int s3c24xx_serial_startup(struct uart_port *port)
 	/* the port reset code should have done the correct
 	 * register setup for the port controls */
 
-	local_irq_restore(flags);
 	return ret;
 
  err:
 	s3c24xx_serial_shutdown(port);
-	local_irq_restore(flags);
 	return ret;
 }
 
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 139863a..54699c3 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1808,6 +1808,12 @@ uart_set_options(struct uart_port *port, struct console *co,
 	struct termios termios;
 	int i;
 
+	/*
+	 * Ensure that the serial console lock is initialised
+	 * early.
+	 */
+	spin_lock_init(&port->lock);
+
 	memset(&termios, 0, sizeof(struct termios));
 
 	termios.c_cflag = CREAD | HUPCL | CLOCAL;
@@ -2196,10 +2202,16 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
 
 	state->port = port;
 
-	spin_lock_init(&port->lock);
 	port->cons = drv->cons;
 	port->info = state->info;
 
+	/*
+	 * If this port is a console, then the spinlock is already
+	 * initialised.
+	 */
+	if (!uart_console(port))
+		spin_lock_init(&port->lock);
+
 	uart_configure_port(drv, state, port);
 
 	/*
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 73a34b1..de0136c 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -45,7 +45,6 @@
 #include <asm/io.h>
 #include <asm/system.h>
 
-#include <pcmcia/version.h>
 #include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
@@ -232,11 +231,6 @@ static dev_link_t *serial_attach(void)
 	link->next = dev_list;
 	dev_list = link;
 	client_reg.dev_info = &dev_info;
-	client_reg.EventMask =
-	    CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
-	    CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
-	    CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
-	client_reg.event_handler = &serial_event;
 	client_reg.Version = 0x0210;
 	client_reg.event_callback_args.client_data = link;
 	ret = pcmcia_register_client(&link->handle, &client_reg);
@@ -883,6 +877,7 @@ static struct pcmcia_driver serial_cs_driver = {
 		.name	= "serial_cs",
 	},
 	.attach		= serial_attach,
+	.event		= serial_event,
 	.detach		= serial_detach,
 	.id_table	= serial_ids,
 };