diff options
author | Russell King <rmk+kernel@arm.linux.org.uk> | 2010-02-25 22:10:38 (GMT) |
---|---|---|
committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2010-02-25 22:10:38 (GMT) |
commit | 9f33be2c3a80bdc2cc08342dd77fac87652e0548 (patch) | |
tree | 7ad6e825427a15c5ec0fc15540abc0429d7f4bce /drivers/serial | |
parent | 2741ecb4ce5c2d430b5c44b0a169038338c21df5 (diff) | |
parent | eed18b5fa4d297c681b00144e8c6942dd35d39a7 (diff) | |
download | linux-fsl-qoriq-9f33be2c3a80bdc2cc08342dd77fac87652e0548.tar.xz |
Merge branches 'clks' and 'pnx' into devel
Diffstat (limited to 'drivers/serial')
-rw-r--r-- | drivers/serial/8250_pnp.c | 10 | ||||
-rw-r--r-- | drivers/serial/imx.c | 2 | ||||
-rw-r--r-- | drivers/serial/serial_core.c | 105 | ||||
-rw-r--r-- | drivers/serial/serial_cs.c | 3 |
4 files changed, 49 insertions, 71 deletions
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c index b5496a1..24485cc 100644 --- a/drivers/serial/8250_pnp.c +++ b/drivers/serial/8250_pnp.c @@ -328,15 +328,7 @@ static const struct pnp_device_id pnp_dev_table[] = { /* U.S. Robotics 56K Voice INT PnP*/ { "USR9190", 0 }, /* Wacom tablets */ - { "WACF004", 0 }, - { "WACF005", 0 }, - { "WACF006", 0 }, - { "WACF007", 0 }, - { "WACF008", 0 }, - { "WACF009", 0 }, - { "WACF00A", 0 }, - { "WACF00B", 0 }, - { "WACF00C", 0 }, + { "WACFXXX", 0 }, /* Compaq touchscreen */ { "FPI2002", 0 }, /* Fujitsu Stylistic touchscreens */ diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 18130f1..60d665a 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -1088,7 +1088,7 @@ imx_console_get_options(struct imx_port *sport, int *baud, int *parity, int *bits) { - if ( readl(sport->port.membase + UCR1) | UCR1_UARTEN ) { + if (readl(sport->port.membase + UCR1) & UCR1_UARTEN) { /* ok, the port was enabled */ unsigned int ucr2, ubir,ubmr, uartclk; unsigned int baud_raw; diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 047530b..7f28307 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -385,13 +385,20 @@ uart_get_baud_rate(struct uart_port *port, struct ktermios *termios, } /* - * As a last resort, if the quotient is zero, - * default to 9600 bps + * As a last resort, if the range cannot be met then clip to + * the nearest chip supported rate. */ - if (!hung_up) - tty_termios_encode_baud_rate(termios, 9600, 9600); + if (!hung_up) { + if (baud <= min) + tty_termios_encode_baud_rate(termios, + min + 1, min + 1); + else + tty_termios_encode_baud_rate(termios, + max - 1, max - 1); + } } - + /* Should never happen */ + WARN_ON(1); return 0; } @@ -2006,12 +2013,6 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) mutex_lock(&port->mutex); - if (!console_suspend_enabled && uart_console(uport)) { - /* we're going to avoid suspending serial console */ - mutex_unlock(&port->mutex); - return 0; - } - tty_dev = device_find_child(uport->dev, &match, serial_match_port); if (device_may_wakeup(tty_dev)) { enable_irq_wake(uport->irq); @@ -2019,20 +2020,23 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) mutex_unlock(&port->mutex); return 0; } - uport->suspended = 1; + if (console_suspend_enabled || !uart_console(uport)) + uport->suspended = 1; if (port->flags & ASYNC_INITIALIZED) { const struct uart_ops *ops = uport->ops; int tries; - set_bit(ASYNCB_SUSPENDED, &port->flags); - clear_bit(ASYNCB_INITIALIZED, &port->flags); + if (console_suspend_enabled || !uart_console(uport)) { + set_bit(ASYNCB_SUSPENDED, &port->flags); + clear_bit(ASYNCB_INITIALIZED, &port->flags); - spin_lock_irq(&uport->lock); - ops->stop_tx(uport); - ops->set_mctrl(uport, 0); - ops->stop_rx(uport); - spin_unlock_irq(&uport->lock); + spin_lock_irq(&uport->lock); + ops->stop_tx(uport); + ops->set_mctrl(uport, 0); + ops->stop_rx(uport); + spin_unlock_irq(&uport->lock); + } /* * Wait for the transmitter to empty. @@ -2047,16 +2051,18 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) drv->dev_name, drv->tty_driver->name_base + uport->line); - ops->shutdown(uport); + if (console_suspend_enabled || !uart_console(uport)) + ops->shutdown(uport); } /* * Disable the console device before suspending. */ - if (uart_console(uport)) + if (console_suspend_enabled && uart_console(uport)) console_stop(uport->cons); - uart_change_pm(state, 3); + if (console_suspend_enabled || !uart_console(uport)) + uart_change_pm(state, 3); mutex_unlock(&port->mutex); @@ -2073,29 +2079,6 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) mutex_lock(&port->mutex); - if (!console_suspend_enabled && uart_console(uport)) { - /* no need to resume serial console, it wasn't suspended */ - /* - * First try to use the console cflag setting. - */ - memset(&termios, 0, sizeof(struct ktermios)); - termios.c_cflag = uport->cons->cflag; - /* - * If that's unset, use the tty termios setting. - */ - if (termios.c_cflag == 0) - termios = *state->port.tty->termios; - else { - termios.c_ispeed = termios.c_ospeed = - tty_termios_input_baud_rate(&termios); - termios.c_ispeed = termios.c_ospeed = - tty_termios_baud_rate(&termios); - } - uport->ops->set_termios(uport, &termios, NULL); - mutex_unlock(&port->mutex); - return 0; - } - tty_dev = device_find_child(uport->dev, &match, serial_match_port); if (!uport->suspended && device_may_wakeup(tty_dev)) { disable_irq_wake(uport->irq); @@ -2121,21 +2104,23 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport) spin_lock_irq(&uport->lock); ops->set_mctrl(uport, 0); spin_unlock_irq(&uport->lock); - ret = ops->startup(uport); - if (ret == 0) { - uart_change_speed(state, NULL); - spin_lock_irq(&uport->lock); - ops->set_mctrl(uport, uport->mctrl); - ops->start_tx(uport); - spin_unlock_irq(&uport->lock); - set_bit(ASYNCB_INITIALIZED, &port->flags); - } else { - /* - * Failed to resume - maybe hardware went away? - * Clear the "initialized" flag so we won't try - * to call the low level drivers shutdown method. - */ - uart_shutdown(state); + if (console_suspend_enabled || !uart_console(uport)) { + ret = ops->startup(uport); + if (ret == 0) { + uart_change_speed(state, NULL); + spin_lock_irq(&uport->lock); + ops->set_mctrl(uport, uport->mctrl); + ops->start_tx(uport); + spin_unlock_irq(&uport->lock); + set_bit(ASYNCB_INITIALIZED, &port->flags); + } else { + /* + * Failed to resume - maybe hardware went away? + * Clear the "initialized" flag so we won't try + * to call the low level drivers shutdown method. + */ + uart_shutdown(state); + } } clear_bit(ASYNCB_SUSPENDED, &port->flags); diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 0ee7239..df85440 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -146,7 +146,8 @@ static void quirk_wakeup_oxsemi(struct pcmcia_device *link) { struct serial_info *info = link->priv; - outb(12, info->c950ctrl + 1); + if (info->c950ctrl) + outb(12, info->c950ctrl + 1); } /* request_region? oxsemi branch does no request_region too... */ |