Staging: bcm: Fix all white space issues in Ioctl.h

This patch fixes all white space issues
in Ioctl.h as reported by checkpatch.pl.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 106 insertions, 184 deletions

diff --git a/drivers/staging/bcm/Ioctl.h b/drivers/staging/bcm/Ioctl.h
index f859cf1..8d89c34 100644
--- a/drivers/staging/bcm/Ioctl.h
+++ b/drivers/staging/bcm/Ioctl.h
@@ -3,233 +3,161 @@
 
 typedef struct rdmbuffer
 {
-	ULONG	Register;
-	ULONG	Length;
-}__attribute__((packed)) RDM_BUFFER, *PRDM_BUFFER;
-
+	ULONG Register;
+	ULONG Length;
+} __attribute__((packed)) RDM_BUFFER, *PRDM_BUFFER;
 
 typedef struct wrmbuffer
 {
-	ULONG	Register;
-	ULONG	Length;
-	UCHAR	Data[4];
-}__attribute__((packed)) WRM_BUFFER, *PWRM_BUFFER;
-
+	ULONG Register;
+	ULONG Length;
+	UCHAR Data[4];
+} __attribute__((packed)) WRM_BUFFER, *PWRM_BUFFER;
 
 typedef struct ioctlbuffer
 {
 	void __user *InputBuffer;
-	ULONG	InputLength;
+	ULONG InputLength;
 	void __user *OutputBuffer;
-	ULONG	OutputLength;
-}__attribute__((packed)) IOCTL_BUFFER, *PIOCTL_BUFFER;
+	ULONG OutputLength;
+} __attribute__((packed)) IOCTL_BUFFER, *PIOCTL_BUFFER;
 
 typedef struct stGPIOInfo
 {
-	UINT  uiGpioNumber ; /* valid numbers 0-15 */
+	UINT uiGpioNumber; /* valid numbers 0-15 */
 	UINT uiGpioValue; /* 1 set ; 0 not  set */
-}__attribute__((packed))GPIO_INFO,*PGPIO_INFO;
+} __attribute__((packed))GPIO_INFO, *PGPIO_INFO;
+
 typedef struct stUserThreadReq
 {
 	//0->Inactivate LED thread.
 	//1->Activate the LED thread
 	UINT ThreadState;
-}__attribute__((packed))USER_THREAD_REQ,*PUSER_THREAD_REQ;
+} __attribute__((packed))USER_THREAD_REQ, *PUSER_THREAD_REQ;
 #define LED_THREAD_ACTIVATION_REQ  1
 
-
 ////********** ioctl codes ***********////
 
-#define BCM_IOCTL 				'k'
-
+#define BCM_IOCTL				'k'
 //1.Control code for CONTROL MESSAGES
-
-#define IOCTL_SEND_CONTROL_MESSAGE 			_IOW(BCM_IOCTL,	0x801,int)
-
+#define IOCTL_SEND_CONTROL_MESSAGE		_IOW(BCM_IOCTL,	0x801, int)
 //2.Control code to write a particular value to a particular register
-#define IOCTL_BCM_REGISTER_WRITE            _IOW(BCM_IOCTL, 0x802, int) //
-
+#define IOCTL_BCM_REGISTER_WRITE		_IOW(BCM_IOCTL, 0x802, int) //
 //3.
-#define IOCTL_BCM_REGISTER_READ             _IOR(BCM_IOCTL, 0x803, int) //
-
+#define IOCTL_BCM_REGISTER_READ			_IOR(BCM_IOCTL, 0x803, int) //
 //4.Control code to write x number of bytes to common memory
 //starting from address y
-#define IOCTL_BCM_COMMON_MEMORY_WRITE  	    _IOW(BCM_IOCTL, 0x804, int)//
-
+#define IOCTL_BCM_COMMON_MEMORY_WRITE		_IOW(BCM_IOCTL, 0x804, int)//
 //5.Control code to write x number of bytes to common memory
 //starting from address y
-#define IOCTL_BCM_COMMON_MEMORY_READ 	    _IOR(BCM_IOCTL, 0x805, int)//
-
+#define IOCTL_BCM_COMMON_MEMORY_READ		_IOR(BCM_IOCTL, 0x805, int)//
 //6.Control code for CONTROL MESSAGES
-#define IOCTL_GET_CONTROL_MESSAGE 			_IOR(BCM_IOCTL,	0x806, int)//
-
+#define IOCTL_GET_CONTROL_MESSAGE		_IOR(BCM_IOCTL,	0x806, int)//
 //7.Control code for FIRMWARE DOWNLOAD
-#define IOCTL_BCM_FIRMWARE_DOWNLOAD 		_IOW(BCM_IOCTL, 0x807, int)//
-
-#define IOCTL_BCM_SET_SEND_VCID 	        _IOW(BCM_IOCTL,	0x808, int)
-
+#define IOCTL_BCM_FIRMWARE_DOWNLOAD		_IOW(BCM_IOCTL, 0x807, int)//
+#define IOCTL_BCM_SET_SEND_VCID			_IOW(BCM_IOCTL,	0x808, int)
 //9.Control code for TRANSFER MODE SWITCHING
-#define IOCTL_BCM_SWITCH_TRANSFER_MODE 		_IOW(BCM_IOCTL, 0x809, int)
+#define IOCTL_BCM_SWITCH_TRANSFER_MODE		_IOW(BCM_IOCTL, 0x809, int)
 //10.Control code for LINK UP
-#define IOCTL_LINK_REQ 						_IOW(BCM_IOCTL, 0x80A, int)
-
+#define IOCTL_LINK_REQ				_IOW(BCM_IOCTL, 0x80A, int)
 //11.Control code for RSSI Level Request
-#define IOCTL_RSSI_LEVEL_REQ				_IOW(BCM_IOCTL, 0x80B, int)
+#define IOCTL_RSSI_LEVEL_REQ			_IOW(BCM_IOCTL, 0x80B, int)
 //12.Control code for IDLE MODE CONTROL
-#define IOCTL_IDLE_REQ						_IOW(BCM_IOCTL, 0x80C, int)
+#define IOCTL_IDLE_REQ				_IOW(BCM_IOCTL, 0x80C, int)
 //13.Control code for SS/BS info
-#define IOCTL_SS_INFO_REQ					_IOW(BCM_IOCTL, 0x80D, int)
-
+#define IOCTL_SS_INFO_REQ			_IOW(BCM_IOCTL, 0x80D, int)
 #define IOCTL_GET_STATISTICS_POINTER		_IOW(BCM_IOCTL, 0x80E, int)
-
-#define IOCTL_CM_REQUEST    				_IOW(BCM_IOCTL, 0x80F, int)
-
-#define IOCTL_INIT_PARAM_REQ 				_IOW(BCM_IOCTL, 0x810, int)
-
-#define IOCTL_MAC_ADDR_REQ				_IOW(BCM_IOCTL, 0x811, int)
-
-#define IOCTL_MAC_ADDR_RESP				_IOWR(BCM_IOCTL, 0x812, int)
-
-#define IOCTL_CLASSIFICATION_RULE	  	_IOW(BCM_IOCTL, 0x813, char)
-
+#define IOCTL_CM_REQUEST			_IOW(BCM_IOCTL, 0x80F, int)
+#define IOCTL_INIT_PARAM_REQ			_IOW(BCM_IOCTL, 0x810, int)
+#define IOCTL_MAC_ADDR_REQ			_IOW(BCM_IOCTL, 0x811, int)
+#define IOCTL_MAC_ADDR_RESP			_IOWR(BCM_IOCTL, 0x812, int)
+#define IOCTL_CLASSIFICATION_RULE		_IOW(BCM_IOCTL, 0x813, char)
 #define IOCTL_CLOSE_NOTIFICATION		_IO(BCM_IOCTL, 0x814)
-
-#define IOCTL_LINK_UP					_IO(BCM_IOCTL, 0x815)
-
-#define IOCTL_LINK_DOWN					_IO(BCM_IOCTL, 0x816, IOCTL_BUFFER)
-
-#define IOCTL_CHIP_RESET                _IO(BCM_IOCTL, 0x816)
-
+#define IOCTL_LINK_UP				_IO(BCM_IOCTL, 0x815)
+#define IOCTL_LINK_DOWN				_IO(BCM_IOCTL, 0x816, IOCTL_BUFFER)
+#define IOCTL_CHIP_RESET			_IO(BCM_IOCTL, 0x816)
 #define IOCTL_CINR_LEVEL_REQ			_IOW(BCM_IOCTL, 0x817, char)
-
-#define IOCTL_WTM_CONTROL_REQ			_IOW(BCM_IOCTL, 0x817,char)
-
+#define IOCTL_WTM_CONTROL_REQ			_IOW(BCM_IOCTL, 0x817, char)
 #define IOCTL_BE_BUCKET_SIZE			_IOW(BCM_IOCTL, 0x818, unsigned long)
-
 #define IOCTL_RTPS_BUCKET_SIZE			_IOW(BCM_IOCTL, 0x819, unsigned long)
-
-#define IOCTL_QOS_THRESHOLD				_IOW(BCM_IOCTL, 0x820, unsigned long)
-
-#define IOCTL_DUMP_PACKET_INFO				_IO(BCM_IOCTL, 0x821)
-
-#define IOCTL_GET_PACK_INFO					_IOR(BCM_IOCTL, 0x823, int)
-
+#define IOCTL_QOS_THRESHOLD			_IOW(BCM_IOCTL, 0x820, unsigned long)
+#define IOCTL_DUMP_PACKET_INFO			_IO(BCM_IOCTL, 0x821)
+#define IOCTL_GET_PACK_INFO			_IOR(BCM_IOCTL, 0x823, int)
 #define IOCTL_BCM_GET_DRIVER_VERSION		_IOR(BCM_IOCTL, 0x829, int)
-
-#define IOCTL_BCM_GET_CURRENT_STATUS 		_IOW(BCM_IOCTL, 0x828, int)
-
-#define IOCTL_BCM_GPIO_SET_REQUEST	  		_IOW(BCM_IOCTL, 0x82A, int)
-
-#define IOCTL_BCM_GPIO_STATUS_REQUEST 		_IOW(BCM_IOCTL, 0x82b, int)
-
-#define IOCTL_BCM_GET_DSX_INDICATION 		_IOR(BCM_IOCTL, 0x854, int)
-
-#define IOCTL_BCM_BUFFER_DOWNLOAD_START 	_IOW(BCM_IOCTL, 0x855, int)
-
-#define IOCTL_BCM_BUFFER_DOWNLOAD 			_IOW(BCM_IOCTL, 0x856, int)
-
-#define IOCTL_BCM_BUFFER_DOWNLOAD_STOP 		_IOW(BCM_IOCTL, 0x857, int)
-
-#define IOCTL_BCM_REGISTER_WRITE_PRIVATE 	_IOW(BCM_IOCTL, 0x826, char)
-
+#define IOCTL_BCM_GET_CURRENT_STATUS		_IOW(BCM_IOCTL, 0x828, int)
+#define IOCTL_BCM_GPIO_SET_REQUEST		_IOW(BCM_IOCTL, 0x82A, int)
+#define IOCTL_BCM_GPIO_STATUS_REQUEST		_IOW(BCM_IOCTL, 0x82b, int)
+#define IOCTL_BCM_GET_DSX_INDICATION		_IOR(BCM_IOCTL, 0x854, int)
+#define IOCTL_BCM_BUFFER_DOWNLOAD_START		_IOW(BCM_IOCTL, 0x855, int)
+#define IOCTL_BCM_BUFFER_DOWNLOAD		_IOW(BCM_IOCTL, 0x856, int)
+#define IOCTL_BCM_BUFFER_DOWNLOAD_STOP		_IOW(BCM_IOCTL, 0x857, int)
+#define IOCTL_BCM_REGISTER_WRITE_PRIVATE	_IOW(BCM_IOCTL, 0x826, char)
 #define IOCTL_BCM_REGISTER_READ_PRIVATE		_IOW(BCM_IOCTL, 0x827, char)
-
-#define IOCTL_BCM_SET_DEBUG                 _IOW(BCM_IOCTL, 0x824, IOCTL_BUFFER)
-
-#define IOCTL_BCM_EEPROM_REGISTER_WRITE  	_IOW(BCM_IOCTL, 0x858, int)
-
-#define IOCTL_BCM_EEPROM_REGISTER_READ     	_IOR(BCM_IOCTL, 0x859, int)
-
+#define IOCTL_BCM_SET_DEBUG			_IOW(BCM_IOCTL, 0x824, IOCTL_BUFFER)
+#define IOCTL_BCM_EEPROM_REGISTER_WRITE		_IOW(BCM_IOCTL, 0x858, int)
+#define IOCTL_BCM_EEPROM_REGISTER_READ		_IOR(BCM_IOCTL, 0x859, int)
 #define IOCTL_BCM_WAKE_UP_DEVICE_FROM_IDLE	_IOR(BCM_IOCTL, 0x860, int)
-
-#define IOCTL_BCM_SET_MAC_TRACING     		_IOW(BCM_IOCTL, 0x82c, int)
-
-#define IOCTL_BCM_GET_HOST_MIBS 		  	_IOW(BCM_IOCTL, 0x853, int)
-
-#define IOCTL_BCM_NVM_READ 					_IOR(BCM_IOCTL, 0x861, int)
-
-#define IOCTL_BCM_NVM_WRITE					_IOW(BCM_IOCTL, 0x862, int)
-
-#define IOCTL_BCM_GET_NVM_SIZE				_IOR(BCM_IOCTL, 0x863, int)
-
-#define IOCTL_BCM_CAL_INIT					_IOR(BCM_IOCTL, 0x864, int)
-
-#define IOCTL_BCM_BULK_WRM 					_IOW(BCM_IOCTL, 0x90B, int)
-
-#define IOCTL_BCM_FLASH2X_SECTION_READ 		_IOR(BCM_IOCTL, 0x865, int)
-
+#define IOCTL_BCM_SET_MAC_TRACING		_IOW(BCM_IOCTL, 0x82c, int)
+#define IOCTL_BCM_GET_HOST_MIBS			_IOW(BCM_IOCTL, 0x853, int)
+#define IOCTL_BCM_NVM_READ			_IOR(BCM_IOCTL, 0x861, int)
+#define IOCTL_BCM_NVM_WRITE			_IOW(BCM_IOCTL, 0x862, int)
+#define IOCTL_BCM_GET_NVM_SIZE			_IOR(BCM_IOCTL, 0x863, int)
+#define IOCTL_BCM_CAL_INIT			_IOR(BCM_IOCTL, 0x864, int)
+#define IOCTL_BCM_BULK_WRM			_IOW(BCM_IOCTL, 0x90B, int)
+#define IOCTL_BCM_FLASH2X_SECTION_READ		_IOR(BCM_IOCTL, 0x865, int)
 #define IOCTL_BCM_FLASH2X_SECTION_WRITE		_IOW(BCM_IOCTL, 0x866, int)
-
-#define IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP _IOR(BCM_IOCTL,0x867, int)
-
-#define IOCTL_BCM_SET_ACTIVE_SECTION 		_IOW(BCM_IOCTL,0x868, int)
-
-#define	IOCTL_BCM_IDENTIFY_ACTIVE_SECTION 	_IO(BCM_IOCTL,0x869)
-
-#define IOCTL_BCM_COPY_SECTION 				_IOW(BCM_IOCTL, 0x870,int)
-
-#define	IOCTL_BCM_GET_FLASH_CS_INFO 		_IOR(BCM_IOCTL, 0x871, int)
-
-#define IOCTL_BCM_SELECT_DSD 				_IOW(BCM_IOCTL, 0x872, int)
-
-#define IOCTL_BCM_NVM_RAW_READ  			_IOR(BCM_IOCTL, 0x875, int)
-
-#define IOCTL_BCM_CNTRLMSG_MASK  			_IOW(BCM_IOCTL, 0x874, int)
-
-#define IOCTL_BCM_GET_DEVICE_DRIVER_INFO  _IOR(BCM_IOCTL, 0x877, int)
-
-#define IOCTL_BCM_TIME_SINCE_NET_ENTRY  _IOR(BCM_IOCTL, 0x876, int)
-
-#define BCM_LED_THREAD_STATE_CHANGE_REQ	  _IOW(BCM_IOCTL, 0x878, int)
-
+#define IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP	_IOR(BCM_IOCTL, 0x867, int)
+#define IOCTL_BCM_SET_ACTIVE_SECTION		_IOW(BCM_IOCTL, 0x868, int)
+#define	IOCTL_BCM_IDENTIFY_ACTIVE_SECTION	_IO(BCM_IOCTL, 0x869)
+#define IOCTL_BCM_COPY_SECTION			_IOW(BCM_IOCTL, 0x870, int)
+#define	IOCTL_BCM_GET_FLASH_CS_INFO		_IOR(BCM_IOCTL, 0x871, int)
+#define IOCTL_BCM_SELECT_DSD			_IOW(BCM_IOCTL, 0x872, int)
+#define IOCTL_BCM_NVM_RAW_READ			_IOR(BCM_IOCTL, 0x875, int)
+#define IOCTL_BCM_CNTRLMSG_MASK			_IOW(BCM_IOCTL, 0x874, int)
+#define IOCTL_BCM_GET_DEVICE_DRIVER_INFO	_IOR(BCM_IOCTL, 0x877, int)
+#define IOCTL_BCM_TIME_SINCE_NET_ENTRY		_IOR(BCM_IOCTL, 0x876, int)
+#define BCM_LED_THREAD_STATE_CHANGE_REQ		_IOW(BCM_IOCTL, 0x878, int)
 #define IOCTL_BCM_GPIO_MULTI_REQUEST		_IOW(BCM_IOCTL, 0x82D, IOCTL_BUFFER)
-#define IOCTL_BCM_GPIO_MODE_REQUEST			_IOW(BCM_IOCTL, 0x82E, IOCTL_BUFFER)
-
-
+#define IOCTL_BCM_GPIO_MODE_REQUEST		_IOW(BCM_IOCTL, 0x82E, IOCTL_BUFFER)
 
 typedef enum _BCM_INTERFACE_TYPE
 {
-        BCM_MII,
-        BCM_CARDBUS,
-        BCM_USB,
-        BCM_SDIO,
-        BCM_PCMCIA
-}BCM_INTERFACE_TYPE;
+	BCM_MII,
+	BCM_CARDBUS,
+	BCM_USB,
+	BCM_SDIO,
+	BCM_PCMCIA
+} BCM_INTERFACE_TYPE;
 
 typedef struct _DEVICE_DRIVER_INFO
 {
-	NVM_TYPE 			u32NVMType;
-	UINT 				MaxRDMBufferSize;
-	BCM_INTERFACE_TYPE 	u32InterfaceType;
-	UINT 				u32DSDStartOffset;
-	UINT				u32RxAlignmentCorrection;
-	UINT 				u32Reserved[10];
+	NVM_TYPE	u32NVMType;
+	UINT		MaxRDMBufferSize;
+	BCM_INTERFACE_TYPE	u32InterfaceType;
+	UINT		u32DSDStartOffset;
+	UINT		u32RxAlignmentCorrection;
+	UINT		u32Reserved[10];
 } DEVICE_DRIVER_INFO;
 
 typedef  struct _NVM_READWRITE
 {
-
 	void __user *pBuffer;
 // Data to be written from|read to. Memory should be allocated by the caller.
-
 	uint32_t  uiOffset;
 // offset at which data should be written to or read from.
-
-	uint32_t  uiNumBytes;
+	uint32_t uiNumBytes;
 // No. of bytes to be written or read.
-
-	bool  bVerify;
+	bool bVerify;
 // Applicable only for write. If set verification of written data will be done.
+} NVM_READWRITE, *PNVM_READWRITE;
 
-} NVM_READWRITE,*PNVM_READWRITE;
 typedef struct bulkwrmbuffer
 {
-	ULONG	Register;
-	ULONG	SwapEndian;
-	ULONG	Values[1];
-
-}BULKWRM_BUFFER,*PBULKWRM_BUFFER;
+	ULONG Register;
+	ULONG SwapEndian;
+	ULONG Values[1];
 
+} BULKWRM_BUFFER, *PBULKWRM_BUFFER;
 
 /***********Structure used for FlashMap2.x *******************************/
 
@@ -257,21 +185,19 @@ typedef enum _FLASH2X_SECTION_VAL
 	ISO_IMAGE2_PART2,
 	ISO_IMAGE2_PART3,
 	TOTAL_SECTIONS
-}FLASH2X_SECTION_VAL;
+} FLASH2X_SECTION_VAL;
 
 /*
 *	Structure used for READ/WRITE Flash  Map2.x
 */
 typedef struct _FLASH2X_READWRITE
 {
-
 	FLASH2X_SECTION_VAL Section; //which section has to be read/written
 	B_UINT32 offset;		//Offset within Section.
 	B_UINT32 numOfBytes;	//NOB from the offset
 	B_UINT32  bVerify;
 	void __user *pDataBuff;	//Buffer for reading/writing
-
-}FLASH2X_READWRITE, *PFLASH2X_READWRITE;
+} FLASH2X_READWRITE, *PFLASH2X_READWRITE;
 /*
 *	This structure is used for coping one section to other.
 *	there are two ways to copy one section to other.
@@ -283,18 +209,14 @@ typedef struct _FLASH2X_COPY_SECTION
 {
 	//Src Section from which Data has to be copied to DstSection
 	FLASH2X_SECTION_VAL SrcSection;
-
 	//Destination Section from where Data has to be coppied.
 	FLASH2X_SECTION_VAL DstSection;
-
 	//Offset within Section. if NOB =0 it will be ignored and data will be coped from offset 0.
 	B_UINT32 offset;
-
 	//NOB from the offset. if NOB = 0 complete src section will be copied to Destination section.
 	B_UINT32 numOfBytes;
 } FLASH2X_COPY_SECTION, *PFLASH2X_COPY_SECTION;
 
-
 typedef enum _SECTION_TYPE
 {
 	ISO = 0,
@@ -329,32 +251,32 @@ typedef struct _FLASH2X_BITMAP
 	UCHAR Reserved0;
 	UCHAR Reserved1;
 	UCHAR Reserved2;
-}FLASH2X_BITMAP, *PFLASH2X_BITMAP;
+} FLASH2X_BITMAP, *PFLASH2X_BITMAP;
 
 //for net entry time check
 typedef struct _ST_TIME_ELAPSED_
 {
 	ULONG64	ul64TimeElapsedSinceNetEntry;
-	UINT32   uiReserved[4]; //By chance if required for future proofing
-}ST_TIME_ELAPSED,*PST_TIME_ELAPSED;
+	UINT32  uiReserved[4]; //By chance if required for future proofing
+} ST_TIME_ELAPSED, *PST_TIME_ELAPSED;
 
 enum {
-  WIMAX_IDX=0, /*To access WiMAX chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE*/
-  HOST_IDX,    /*To access Host chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE*/
-  MAX_IDX
+	WIMAX_IDX = 0, /*To access WiMAX chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE*/
+	HOST_IDX,    /*To access Host chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE*/
+	MAX_IDX
 };
+
 typedef struct stGPIOMultiInfo
 {
-  UINT uiGPIOCommand; /* 1 for set and 0 for get*/
-  UINT uiGPIOMask;    /* set the correspondig bit to 1 to access GPIO*/
-  UINT uiGPIOValue;   /* 0 or 1; value to be set when command is 1.*/
-}__attribute__((packed))GPIO_MULTI_INFO , *PGPIO_MULTI_INFO;
+	UINT uiGPIOCommand; /* 1 for set and 0 for get*/
+	UINT uiGPIOMask;    /* set the correspondig bit to 1 to access GPIO*/
+	UINT uiGPIOValue;   /* 0 or 1; value to be set when command is 1.*/
+} __attribute__((packed))GPIO_MULTI_INFO, *PGPIO_MULTI_INFO;
 
 typedef struct stGPIOMultiMode
 {
-  UINT uiGPIOMode;    /* 1 for OUT mode, 0 for IN mode*/
-  UINT uiGPIOMask;    /* GPIO mask to set mode*/
-}__attribute__((packed))GPIO_MULTI_MODE, *PGPIO_MULTI_MODE;
-
+	UINT uiGPIOMode;    /* 1 for OUT mode, 0 for IN mode*/
+	UINT uiGPIOMask;    /* GPIO mask to set mode*/
+} __attribute__((packed))GPIO_MULTI_MODE, *PGPIO_MULTI_MODE;
 
 #endif