staging: et131x: Use MII register defines from mii.h

Use defines from include/linux/mii.h instead of et131x_phy.h and delete the latter defines.

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 160 deletions

diff --git a/drivers/staging/et131x/et1310_phy.h b/drivers/staging/et131x/et1310_phy.h
index 8e9404e..d8753f1 100644
--- a/drivers/staging/et131x/et1310_phy.h
+++ b/drivers/staging/et131x/et1310_phy.h
@@ -61,24 +61,6 @@
 
 #include "et1310_address_map.h"
 
-/* MI Register Addresses */
-#define MI_CONTROL_REG                      0
-#define MI_STATUS_REG                       1
-#define MI_PHY_IDENTIFIER_1_REG             2
-#define MI_PHY_IDENTIFIER_2_REG             3
-#define MI_AUTONEG_ADVERTISEMENT_REG        4
-#define MI_AUTONEG_LINK_PARTNER_ABILITY_REG 5
-#define MI_AUTONEG_EXPANSION_REG            6
-#define MI_AUTONEG_NEXT_PAGE_TRANSMIT_REG   7
-#define MI_LINK_PARTNER_NEXT_PAGE_REG       8
-#define MI_1000BASET_CONTROL_REG            9
-#define MI_1000BASET_STATUS_REG             10
-#define MI_RESERVED11_REG                   11
-#define MI_RESERVED12_REG                   12
-#define MI_RESERVED13_REG                   13
-#define MI_RESERVED14_REG                   14
-#define MI_EXTENDED_STATUS_REG              15
-
 /* VMI Register Addresses */
 #define VMI_RESERVED16_REG                  16
 #define VMI_RESERVED17_REG                  17
@@ -126,134 +108,6 @@ struct mi_regs {
 	u8 mi_res4[3];	/* Future use by MI working group(Reg 0x1D - 0x1F) */
 };
 
-/*
- * MI Register 0: Basic mode control register
- *	15:	reset
- *	14:	loopback
- *	13:	speed_sel
- *	12:	enable_autoneg
- *	11:	power_down
- *	10:	isolate
- *	9:	restart_autoneg
- *	8:	duplex_mode
- *	7:	col_test
- *	6:	speed_1000_sel
- *	5-0:	res1
- */
-
-/*
- * MI Register 1:  Basic mode status register
- *	15:	link_100T4
- *	14:	link_100fdx
- *	13:	link_100hdx
- *	12:	link_10fdx
- *	11:	link_10hdx
- *	10:	link_100T2fdx
- *	9:	link_100T2hdx
- *	8:	extend_status
- *	7:	res1
- *	6:	preamble_supress
- *	5:	auto_neg_complete
- *	4:	remote_fault
- *	3:	auto_neg_able
- *	2:	link_status
- *	1:	jabber_detect
- *	0:	ext_cap
- */
-
-#define MI_BMSR_LINK_STATUS	  0x04
-#define MI_BMSR_AUTO_NEG_COMPLETE 0x20
-
-/*
- * MI Register 4: Auto-negotiation advertisement register
- *
- *	15:	np_indication
- *	14:	res2
- *	13:	remote_fault
- *	12:	res1
- *	11:	cap_asmpause
- *	10:	cap_pause
- *	9:	cap_100T4
- *	8:	cap_100fdx
- *	7:	cap_100hdx
- *	6:	cap_10fdx
- *	5:	cap_10hdx
- *	4-0:	selector
- */
-
-/* MI Register 5: Auto-negotiation link partner advertisement register
- *	15:	np_indication
- *	14:	acknowledge
- *	13:	remote_fault
- *	12:	res1
- *	11:	cap_asmpause
- *	10:	cap_pause
- *	9:	cap_100T4
- *	8:	cap_100fdx
- *	7:	cap_100hdx
- *	6:	cap_10fdx
- *	5:	cap_10hdx
- *	4-0:	selector
- */
-
-/* MI Register 6: Auto-negotiation expansion register
- *	15-5:	reserved
- *	4:	pdf
- *	3:	lp_np_able
- *	2:	np_able
- *	1:	page_rx
- *	0:	lp_an_able
- */
-
-/* MI Register 7: Auto-negotiation next page transmit reg(0x07)
- *	15:	np
- *	14:	reserved
- *	13:	msg_page
- *	12:	ack2
- *	11:	toggle
- *	10-0	msg
- */
-
-/* MI Register 8: Link Partner Next Page Reg(0x08)
- *	15:	np
- *	14:	ack
- *	13:	msg_page
- *	12:	ack2
- *	11:	toggle
- *	10-0:	msg
- */
-
-/* MI Register 9: 1000BaseT Control Reg(0x09)
- *	15-13:	test_mode
- *	12:	ms_config_en
- *	11:	ms_value
- *	10:	port_type
- *	9:	link_1000fdx
- *	8:	link_1000hdx
- *	7-0:	reserved
- */
-
-/* MI Register 10: 1000BaseT Status Reg(0x0A)
- *	15:	ms_config_fault
- *	14:	ms_resolve
- *	13:	local_rx_status
- *	12:	remote_rx_status
- *	11:	link_1000fdx
- *	10:	link_1000hdx
- *	9-8:	reserved
- *	7-0:	idle_err_cnt
- */
-
-/* MI Register 11 - 14: Reserved Regs(0x0B - 0x0E) */
-
-/* MI Register 15: Extended status Reg(0x0F)
- *	15:	link_1000Xfdx
- *	14:	link_1000Xhdx
- *	13:	link_1000fdx
- *	12:	link_1000hdx
- *	11-0:	reserved
- */
-
 /* MI Register 16 - 18: Reserved Reg(0x10-0x12) */
 
 /* MI Register 19: Loopback Control Reg(0x13)
@@ -422,20 +276,6 @@ struct mi_regs {
 #define TRUEPHY_ADV_DUPLEX_BOTH     \
 	(TRUEPHY_ADV_DUPLEX_FULL | TRUEPHY_ADV_DUPLEX_HALF)
 
-#define PHY_CONTROL                0x00	/* #define TRU_MI_CONTROL_REGISTER                 0 */
-#define PHY_STATUS                 0x01	/* #define TRU_MI_STATUS_REGISTER                  1 */
-#define PHY_ID_1                   0x02	/* #define TRU_MI_PHY_IDENTIFIER_1_REGISTER        2 */
-#define PHY_ID_2                   0x03	/* #define TRU_MI_PHY_IDENTIFIER_2_REGISTER        3 */
-#define PHY_AUTO_ADVERTISEMENT     0x04	/* #define TRU_MI_ADVERTISEMENT_REGISTER           4 */
-#define PHY_AUTO_LINK_PARTNER      0x05	/* #define TRU_MI_LINK_PARTNER_ABILITY_REGISTER    5 */
-#define PHY_AUTO_EXPANSION         0x06	/* #define TRU_MI_EXPANSION_REGISTER               6 */
-#define PHY_AUTO_NEXT_PAGE_TX      0x07	/* #define TRU_MI_NEXT_PAGE_TRANSMIT_REGISTER      7 */
-#define PHY_LINK_PARTNER_NEXT_PAGE 0x08	/* #define TRU_MI_LINK_PARTNER_NEXT_PAGE_REGISTER  8 */
-#define PHY_1000_CONTROL           0x09	/* #define TRU_MI_1000BASET_CONTROL_REGISTER       9 */
-#define PHY_1000_STATUS            0x0A	/* #define TRU_MI_1000BASET_STATUS_REGISTER        10 */
-
-#define PHY_EXTENDED_STATUS        0x0F	/* #define TRU_MI_EXTENDED_STATUS_REGISTER         15 */
-
 /* some defines for modem registers that seem to be 'reserved' */
 #define PHY_INDEX_REG              0x10
 #define PHY_DATA_REG               0x11