Merge tag 'staging-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver tree merge from Greg Kroah-Hartman:
 "Here's the big staging tree merge for 3.8-rc1

  There's a lot of patches in here, the majority being the comedi
  rework/cleanup that has been ongoing and is causing a huge reduction
  in overall code size, which is amazing to watch.  We also removed some
  older drivers (telephony and rts_pstor), and added a new one (fwserial
  which also came in through the tty tree due to tty api changes, take
  that one if you get merge conflicts.)

  The iio and ipack drivers are moving out of the staging area into
  their own part of the kernel as they have been cleaned up sufficiently
  and are working well.

  Overall, again a reduction of code:
   768 files changed, 31887 insertions(+), 82166 deletions(-)

  All of this has been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'staging-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1298 commits)
  iio: imu: adis16480: remove duplicated include from adis16480.c
  iio: gyro: adis16136: remove duplicated include from adis16136.c
  iio:imu: adis16480: show_firmware() buffer too small
  iio:gyro: adis16136: divide by zero in write_frequency()
  iio: adc: Add Texas Instruments ADC081C021/027 support
  iio:ad7793: Add support for the ad7796 and ad7797
  iio:ad7793: Add support for the ad7798 and ad7799
  staging:iio: Move ad7793 driver out of staging
  staging:iio:ad7793: Implement stricter id checking
  staging:iio:ad7793: Move register definitions from header to source
  staging:iio:ad7793: Rework regulator handling
  staging:iio:ad7793: Rework platform data
  staging:iio:ad7793: Use kstrtol instead of strict_strtol
  staging:iio:ad7793: Use usleep_range instead of msleep
  staging:iio:ad7793: Fix temperature scale
  staging:iio:ad7793: Fix VDD monitor scale
  staging: gdm72xx: unlock on error in init_usb()
  staging: panel: pass correct lengths to keypad_send_key()
  staging: comedi: addi_apci_2032: fix interrupt support
  staging: comedi: addi_apci_2032: move i_APCI2032_ConfigDigitalOutput()
  ...

1 files changed, 0 insertions, 115 deletions

diff --git a/drivers/staging/iio/adc/ad7793.h b/drivers/staging/iio/adc/ad7793.h
deleted file mode 100644
index 8fdd450a..0000000
--- a/drivers/staging/iio/adc/ad7793.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * AD7792/AD7793 SPI ADC driver
- *
- * Copyright 2011 Analog Devices Inc.
- *
- * Licensed under the GPL-2.
- */
-#ifndef IIO_ADC_AD7793_H_
-#define IIO_ADC_AD7793_H_
-
-/*
- * TODO: struct ad7793_platform_data needs to go into include/linux/iio
- */
-
-/* Registers */
-#define AD7793_REG_COMM		0 /* Communications Register (WO, 8-bit) */
-#define AD7793_REG_STAT		0 /* Status Register	     (RO, 8-bit) */
-#define AD7793_REG_MODE		1 /* Mode Register	     (RW, 16-bit */
-#define AD7793_REG_CONF		2 /* Configuration Register  (RW, 16-bit) */
-#define AD7793_REG_DATA		3 /* Data Register	     (RO, 16-/24-bit) */
-#define AD7793_REG_ID		4 /* ID Register	     (RO, 8-bit) */
-#define AD7793_REG_IO		5 /* IO Register	     (RO, 8-bit) */
-#define AD7793_REG_OFFSET	6 /* Offset Register	     (RW, 16-bit
-				   * (AD7792)/24-bit (AD7793)) */
-#define AD7793_REG_FULLSALE	7 /* Full-Scale Register
-				   * (RW, 16-bit (AD7792)/24-bit (AD7793)) */
-
-/* Communications Register Bit Designations (AD7793_REG_COMM) */
-#define AD7793_COMM_WEN		(1 << 7) /* Write Enable */
-#define AD7793_COMM_WRITE	(0 << 6) /* Write Operation */
-#define AD7793_COMM_READ	(1 << 6) /* Read Operation */
-#define AD7793_COMM_ADDR(x)	(((x) & 0x7) << 3) /* Register Address */
-#define AD7793_COMM_CREAD	(1 << 2) /* Continuous Read of Data Register */
-
-/* Status Register Bit Designations (AD7793_REG_STAT) */
-#define AD7793_STAT_RDY		(1 << 7) /* Ready */
-#define AD7793_STAT_ERR		(1 << 6) /* Error (Overrange, Underrange) */
-#define AD7793_STAT_CH3		(1 << 2) /* Channel 3 */
-#define AD7793_STAT_CH2		(1 << 1) /* Channel 2 */
-#define AD7793_STAT_CH1		(1 << 0) /* Channel 1 */
-
-/* Mode Register Bit Designations (AD7793_REG_MODE) */
-#define AD7793_MODE_SEL(x)	(((x) & 0x7) << 13) /* Operation Mode Select */
-#define AD7793_MODE_SEL_MASK	(0x7 << 13) /* Operation Mode Select mask */
-#define AD7793_MODE_CLKSRC(x)	(((x) & 0x3) << 6) /* ADC Clock Source Select */
-#define AD7793_MODE_RATE(x)	((x) & 0xF) /* Filter Update Rate Select */
-
-#define AD7793_MODE_CONT		0 /* Continuous Conversion Mode */
-#define AD7793_MODE_SINGLE		1 /* Single Conversion Mode */
-#define AD7793_MODE_IDLE		2 /* Idle Mode */
-#define AD7793_MODE_PWRDN		3 /* Power-Down Mode */
-#define AD7793_MODE_CAL_INT_ZERO	4 /* Internal Zero-Scale Calibration */
-#define AD7793_MODE_CAL_INT_FULL	5 /* Internal Full-Scale Calibration */
-#define AD7793_MODE_CAL_SYS_ZERO	6 /* System Zero-Scale Calibration */
-#define AD7793_MODE_CAL_SYS_FULL	7 /* System Full-Scale Calibration */
-
-#define AD7793_CLK_INT		0 /* Internal 64 kHz Clock not
-				   * available at the CLK pin */
-#define AD7793_CLK_INT_CO	1 /* Internal 64 kHz Clock available
-				   * at the CLK pin */
-#define AD7793_CLK_EXT		2 /* External 64 kHz Clock */
-#define AD7793_CLK_EXT_DIV2	3 /* External Clock divided by 2 */
-
-/* Configuration Register Bit Designations (AD7793_REG_CONF) */
-#define AD7793_CONF_VBIAS(x)	(((x) & 0x3) << 14) /* Bias Voltage
-						     * Generator Enable */
-#define AD7793_CONF_BO_EN	(1 << 13) /* Burnout Current Enable */
-#define AD7793_CONF_UNIPOLAR	(1 << 12) /* Unipolar/Bipolar Enable */
-#define AD7793_CONF_BOOST	(1 << 11) /* Boost Enable */
-#define AD7793_CONF_GAIN(x)	(((x) & 0x7) << 8) /* Gain Select */
-#define AD7793_CONF_REFSEL	(1 << 7) /* INT/EXT Reference Select */
-#define AD7793_CONF_BUF		(1 << 4) /* Buffered Mode Enable */
-#define AD7793_CONF_CHAN(x)	((x) & 0xf) /* Channel select */
-#define AD7793_CONF_CHAN_MASK	0xf /* Channel select mask */
-
-#define AD7793_CH_AIN1P_AIN1M	0 /* AIN1(+) - AIN1(-) */
-#define AD7793_CH_AIN2P_AIN2M	1 /* AIN2(+) - AIN2(-) */
-#define AD7793_CH_AIN3P_AIN3M	2 /* AIN3(+) - AIN3(-) */
-#define AD7793_CH_AIN1M_AIN1M	3 /* AIN1(-) - AIN1(-) */
-#define AD7793_CH_TEMP		6 /* Temp Sensor */
-#define AD7793_CH_AVDD_MONITOR	7 /* AVDD Monitor */
-
-#define AD7795_CH_AIN4P_AIN4M	4 /* AIN4(+) - AIN4(-) */
-#define AD7795_CH_AIN5P_AIN5M	5 /* AIN5(+) - AIN5(-) */
-#define AD7795_CH_AIN6P_AIN6M	6 /* AIN6(+) - AIN6(-) */
-#define AD7795_CH_AIN1M_AIN1M	8 /* AIN1(-) - AIN1(-) */
-
-/* ID Register Bit Designations (AD7793_REG_ID) */
-#define AD7792_ID		0xA
-#define AD7793_ID		0xB
-#define AD7795_ID		0xF
-#define AD7793_ID_MASK		0xF
-
-/* IO (Excitation Current Sources) Register Bit Designations (AD7793_REG_IO) */
-#define AD7793_IO_IEXC1_IOUT1_IEXC2_IOUT2	0 /* IEXC1 connect to IOUT1,
-						   * IEXC2 connect to IOUT2 */
-#define AD7793_IO_IEXC1_IOUT2_IEXC2_IOUT1	1 /* IEXC1 connect to IOUT2,
-						   * IEXC2 connect to IOUT1 */
-#define AD7793_IO_IEXC1_IEXC2_IOUT1		2 /* Both current sources
-						   * IEXC1,2 connect to IOUT1 */
-#define AD7793_IO_IEXC1_IEXC2_IOUT2		3 /* Both current sources
-						   * IEXC1,2 connect to IOUT2 */
-
-#define AD7793_IO_IXCEN_10uA	(1 << 0) /* Excitation Current 10uA */
-#define AD7793_IO_IXCEN_210uA	(2 << 0) /* Excitation Current 210uA */
-#define AD7793_IO_IXCEN_1mA	(3 << 0) /* Excitation Current 1mA */
-
-struct ad7793_platform_data {
-	u16			vref_mv;
-	u16			mode;
-	u16			conf;
-	u8			io;
-};
-
-#endif /* IIO_ADC_AD7793_H_ */