diff options
author | Russell King <rmk+kernel@arm.linux.org.uk> | 2009-09-22 19:54:53 (GMT) |
---|---|---|
committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2009-09-22 20:01:40 (GMT) |
commit | ae19ffbadc1b2100285a5b5b3d0a4e0a11390904 (patch) | |
tree | 3c2086ab67398a019089a47ca3f362a4bc6db74f /drivers/staging/iio/adc/max1363.h | |
parent | 34e84f39a27d059a3e6ec6e8b94aafa702e6f220 (diff) | |
parent | 9173a8ef24a6b1b8031507b35b8ffe5f85a87692 (diff) | |
download | linux-fsl-qoriq-ae19ffbadc1b2100285a5b5b3d0a4e0a11390904.tar.xz |
Merge branch 'master' into for-linus
Diffstat (limited to 'drivers/staging/iio/adc/max1363.h')
-rw-r--r-- | drivers/staging/iio/adc/max1363.h | 269 |
1 files changed, 269 insertions, 0 deletions
diff --git a/drivers/staging/iio/adc/max1363.h b/drivers/staging/iio/adc/max1363.h new file mode 100644 index 0000000..8aca81f --- /dev/null +++ b/drivers/staging/iio/adc/max1363.h @@ -0,0 +1,269 @@ +#ifndef _MAX1363_H_ +#define _MAX1363_H_ + +#define MAX1363_SETUP_BYTE(a) ((a) | 0x80) + +/* There is a fair bit more defined here than currently + * used, but the intention is to support everything these + * chips do in the long run */ + +/* see data sheets */ +/* max1363 and max1236, max1237, max1238, max1239 */ +#define MAX1363_SETUP_AIN3_IS_AIN3_REF_IS_VDD 0x00 +#define MAX1363_SETUP_AIN3_IS_REF_EXT_TO_REF 0x20 +#define MAX1363_SETUP_AIN3_IS_AIN3_REF_IS_INT 0x40 +#define MAX1363_SETUP_AIN3_IS_REF_REF_IS_INT 0x60 +#define MAX1363_SETUP_POWER_UP_INT_REF 0x10 +#define MAX1363_SETUP_POWER_DOWN_INT_REF 0x00 + +/* think about includeing max11600 etc - more settings */ +#define MAX1363_SETUP_EXT_CLOCK 0x08 +#define MAX1363_SETUP_INT_CLOCK 0x00 +#define MAX1363_SETUP_UNIPOLAR 0x00 +#define MAX1363_SETUP_BIPOLAR 0x04 +#define MAX1363_SETUP_RESET 0x00 +#define MAX1363_SETUP_NORESET 0x02 +/* max1363 only - though don't care on others. + * For now monitor modes are not implemented as the relevant + * line is not connected on my test board. + * The definitions are here as I intend to add this soon. + */ +#define MAX1363_SETUP_MONITOR_SETUP 0x01 + +/* Specific to the max1363 */ +#define MAX1363_MON_RESET_CHAN(a) (1 << ((a) + 4)) +#define MAX1363_MON_CONV_RATE_133ksps 0 +#define MAX1363_MON_CONV_RATE_66_5ksps 0x02 +#define MAX1363_MON_CONV_RATE_33_3ksps 0x04 +#define MAX1363_MON_CONV_RATE_16_6ksps 0x06 +#define MAX1363_MON_CONV_RATE_8_3ksps 0x08 +#define MAX1363_MON_CONV_RATE_4_2ksps 0x0A +#define MAX1363_MON_CONV_RATE_2_0ksps 0x0C +#define MAX1363_MON_CONV_RATE_1_0ksps 0x0E +#define MAX1363_MON_INT_ENABLE 0x01 + +/* defined for readability reasons */ +/* All chips */ +#define MAX1363_CONFIG_BYTE(a) ((a)) + +#define MAX1363_CONFIG_SE 0x01 +#define MAX1363_CONFIG_DE 0x00 +#define MAX1363_CONFIG_SCAN_TO_CS 0x00 +#define MAX1363_CONFIG_SCAN_SINGLE_8 0x20 +#define MAX1363_CONFIG_SCAN_MONITOR_MODE 0x40 +#define MAX1363_CONFIG_SCAN_SINGLE_1 0x60 +/* max123{6-9} only */ +#define MAX1236_SCAN_MID_TO_CHANNEL 0x40 + +/* max1363 only - merely part of channel selects or don't care for others*/ +#define MAX1363_CONFIG_EN_MON_MODE_READ 0x18 + +#define MAX1363_CHANNEL_SEL(a) ((a) << 1) + +/* max1363 strictly 0x06 - but doesn't matter */ +#define MAX1363_CHANNEL_SEL_MASK 0x1E +#define MAX1363_SCAN_MASK 0x60 +#define MAX1363_SE_DE_MASK 0x01 + +/** + * struct max1363_mode - scan mode information + * @name: Name used to identify the scan mode. + * @conf: The corresponding value of the configuration register + * @numvals: The number of values returned by a single scan + */ +struct max1363_mode { + const char *name; + int8_t conf; + int numvals; +}; + +#define MAX1363_MODE_SINGLE(_num) { \ + .name = #_num, \ + .conf = MAX1363_CHANNEL_SEL(_num) \ + | MAX1363_CONFIG_SCAN_SINGLE_1 \ + | MAX1363_CONFIG_SE, \ + .numvals = 1, \ + } + +#define MAX1363_MODE_SINGLE_TIMES_8(_num) { \ + .name = #_num"x8", \ + .conf = MAX1363_CHANNEL_SEL(_num) \ + | MAX1363_CONFIG_SCAN_SINGLE_8 \ + | MAX1363_CONFIG_SE, \ + .numvals = 8, \ + } + +#define MAX1363_MODE_SCAN_TO_CHANNEL(_num) { \ + .name = "0..."#_num, \ + .conf = MAX1363_CHANNEL_SEL(_num) \ + | MAX1363_CONFIG_SCAN_TO_CS \ + | MAX1363_CONFIG_SE, \ + .numvals = _num + 1, \ + } + + +/* note not available for max1363 hence naming */ +#define MAX1236_MODE_SCAN_MID_TO_CHANNEL(_mid, _num) { \ + .name = #_mid"..."#_num, \ + .conf = MAX1363_CHANNEL_SEL(_num) \ + | MAX1236_SCAN_MID_TO_CHANNEL \ + | MAX1363_CONFIG_SE, \ + .numvals = _num - _mid + 1 \ +} + +#define MAX1363_MODE_DIFF_SINGLE(_nump, _numm) { \ + .name = #_nump"-"#_numm, \ + .conf = MAX1363_CHANNEL_SEL(_nump) \ + | MAX1363_CONFIG_SCAN_SINGLE_1 \ + | MAX1363_CONFIG_DE, \ + .numvals = 1, \ + } + +#define MAX1363_MODE_DIFF_SINGLE_TIMES_8(_nump, _numm) { \ + .name = #_nump"-"#_numm, \ + .conf = MAX1363_CHANNEL_SEL(_nump) \ + | MAX1363_CONFIG_SCAN_SINGLE_8 \ + | MAX1363_CONFIG_DE, \ + .numvals = 1, \ + } + +/* Can't think how to automate naming so specify for now */ +#define MAX1363_MODE_DIFF_SCAN_TO_CHANNEL_NAMED(_name, _num, _numvals) { \ + .name = #_name, \ + .conf = MAX1363_CHANNEL_SEL(_num) \ + | MAX1363_CONFIG_SCAN_TO_CS \ + | MAX1363_CONFIG_DE, \ + .numvals = _numvals, \ + } + +/* note only available for max1363 hence naming */ +#define MAX1236_MODE_DIFF_SCAN_MID_TO_CHANNEL_NAMED(_name, _num, _numvals) { \ + .name = #_name, \ + .conf = MAX1363_CHANNEL_SEL(_num) \ + | MAX1236_SCAN_MID_TO_CHANNEL \ + | MAX1363_CONFIG_SE, \ + .numvals = _numvals, \ +} + +/* Not currently handled */ +#define MAX1363_MODE_MONITOR { \ + .name = "monitor", \ + .conf = MAX1363_CHANNEL_SEL(3) \ + | MAX1363_CONFIG_SCAN_MONITOR_MODE \ + | MAX1363_CONFIG_SE, \ + .numvals = 10, \ + } + +/* This may seem an overly long winded way to do this, but at least it makes + * clear what all the various options actually do. Alternative suggestions + * that don't require user to have intimate knowledge of the chip welcomed. + */ + +/* This must be maintained along side the max1363_mode_table in max1363_core */ +enum max1363_modes { + /* Single read of a single channel */ + _s0, _s1, _s2, _s3, _s4, _s5, _s6, _s7, _s8, _s9, _s10, _s11, + /* Eight reads of a single channel */ + se0, se1, se2, se3, se4, se5, se6, se7, se8, se9, se10, se11, + /* Scan to channel */ + s0to1, s0to2, s0to3, s0to4, s0to5, s0to6, + s0to7, s0to8, s0to9, s0to10, s0to11, + /* Differential single read */ + d0m1, d2m3, d4m5, d6m7, d8m9, d10m11, + d1m0, d3m2, d5m4, d7m6, d9m8, d11m10, + /* Differential single read 8 times */ + de0m1, de2m3, de4m5, de6m7, de8m9, de10m11, + de1m0, de3m2, de5m4, de7m6, de9m8, de11m10, + /* Differential scan to channel */ + d0m1to2m3, d0m1to4m5, d0m1to6m7, d0m1to8m9, d0m1to10m11, + d1m0to3m2, d1m0to5m4, d1m0to7m6, d1m0to9m8, d1m0to11m10, + /* Scan mid to channel max123{6-9} only */ + s2to3, s6to7, s6to8, s6to9, s6to10, s6to11, + /* Differential scan mid to channel */ + s6m7to8m9, s6m7to10m11, s7m6to9m8, s7m6to11m10, +}; + +/** + * struct max1363_chip_info - chip specifc information + * @name: indentification string for chip + * @num_inputs: number of physical inputs on chip + * @int_vref_mv: the internal reference voltage + * @monitor_mode: whether the chip supports monitor interrupts + * @mode_list: array of available scan modes + * @num_modes: the number of scan modes available + * @default_mode: the scan mode in which the chip starts up + */ +struct max1363_chip_info { + const char *name; + u8 num_inputs; + u16 int_vref_mv; + bool monitor_mode; + const enum max1363_modes *mode_list; + int num_modes; + enum max1363_modes default_mode; +}; + + +/** + * struct max1363_state - driver instance specific data + * @indio_dev: the industrial I/O device + * @client: i2c_client + * @setupbyte: cache of current device setup byte + * @configbyte: cache of current device config byte + * @chip_info: chip model specific constants, available modes etc + * @current_mode: the scan mode of this chip + * @poll_work: bottom half of polling interrupt handler + * @protect_ring: used to ensure only one polling bh running at a time + * @reg: supply regulator + */ +struct max1363_state { + struct iio_dev *indio_dev; + struct i2c_client *client; + char setupbyte; + char configbyte; + const struct max1363_chip_info *chip_info; + const struct max1363_mode *current_mode; + struct work_struct poll_work; + atomic_t protect_ring; + struct iio_trigger *trig; + struct regulator *reg; +}; +#ifdef CONFIG_IIO_RING_BUFFER + +ssize_t max1363_scan_from_ring(struct device *dev, + struct device_attribute *attr, + char *buf); +int max1363_register_ring_funcs_and_init(struct iio_dev *indio_dev); +void max1363_ring_cleanup(struct iio_dev *indio_dev); + +int max1363_initialize_ring(struct iio_ring_buffer *ring); +void max1363_uninitialize_ring(struct iio_ring_buffer *ring); + +#else /* CONFIG_IIO_RING_BUFFER */ + +static inline void max1363_uninitialize_ring(struct iio_ring_buffer *ring) +{ +}; + +static inline int max1363_initialize_ring(struct iio_ring_buffer *ring) +{ + return 0; +}; + + +static inline ssize_t max1363_scan_from_ring(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return 0; +}; + +static inline int +max1363_register_ring_funcs_and_init(struct iio_dev *indio_dev) +{ + return 0; +}; + +static inline void max1363_ring_cleanup(struct iio_dev *indio_dev) {}; +#endif /* CONFIG_IIO_RING_BUFFER */ +#endif /* _MAX1363_H_ */ |