Merge tag 'staging-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver tree merge from Greg Kroah-Hartman:
 "Here's the big staging tree merge for 3.8-rc1

  There's a lot of patches in here, the majority being the comedi
  rework/cleanup that has been ongoing and is causing a huge reduction
  in overall code size, which is amazing to watch.  We also removed some
  older drivers (telephony and rts_pstor), and added a new one (fwserial
  which also came in through the tty tree due to tty api changes, take
  that one if you get merge conflicts.)

  The iio and ipack drivers are moving out of the staging area into
  their own part of the kernel as they have been cleaned up sufficiently
  and are working well.

  Overall, again a reduction of code:
   768 files changed, 31887 insertions(+), 82166 deletions(-)

  All of this has been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'staging-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1298 commits)
  iio: imu: adis16480: remove duplicated include from adis16480.c
  iio: gyro: adis16136: remove duplicated include from adis16136.c
  iio:imu: adis16480: show_firmware() buffer too small
  iio:gyro: adis16136: divide by zero in write_frequency()
  iio: adc: Add Texas Instruments ADC081C021/027 support
  iio:ad7793: Add support for the ad7796 and ad7797
  iio:ad7793: Add support for the ad7798 and ad7799
  staging:iio: Move ad7793 driver out of staging
  staging:iio:ad7793: Implement stricter id checking
  staging:iio:ad7793: Move register definitions from header to source
  staging:iio:ad7793: Rework regulator handling
  staging:iio:ad7793: Rework platform data
  staging:iio:ad7793: Use kstrtol instead of strict_strtol
  staging:iio:ad7793: Use usleep_range instead of msleep
  staging:iio:ad7793: Fix temperature scale
  staging:iio:ad7793: Fix VDD monitor scale
  staging: gdm72xx: unlock on error in init_usb()
  staging: panel: pass correct lengths to keypad_send_key()
  staging: comedi: addi_apci_2032: fix interrupt support
  staging: comedi: addi_apci_2032: move i_APCI2032_ConfigDigitalOutput()
  ...

1 files changed, 12 insertions, 217 deletions

diff --git a/drivers/staging/rtl8187se/r8180_rtl8225z2.c b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
index d28c1d9..c592f79 100644
--- a/drivers/staging/rtl8187se/r8180_rtl8225z2.c
+++ b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
@@ -15,7 +15,6 @@
 
 #include "ieee80211/dot11d.h"
 
-
 static void write_rtl8225(struct net_device *dev, u8 adr, u16 data)
 {
 	int i;
@@ -76,22 +75,6 @@ static void write_rtl8225(struct net_device *dev, u8 adr, u16 data)
 	rtl8185_rf_pins_enable(dev);
 }
 
-static const u16 rtl8225bcd_rxgain[] = {
-	0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
-	0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
-	0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
-	0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644,
-	0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688,
-	0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745,
-	0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789,
-	0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793,
-	0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d,
-	0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9,
-	0x07aa, 0x07ab, 0x07ac, 0x07ad, 0x07b0, 0x07b1, 0x07b2, 0x07b3,
-	0x07b4, 0x07b5, 0x07b8, 0x07b9, 0x07ba, 0x07bb, 0x07bb
-
-};
-
 static const u8 rtl8225_agc[] = {
 	0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e,
 	0x9d, 0x9c, 0x9b, 0x9a, 0x99, 0x98, 0x97, 0x96,
@@ -111,122 +94,12 @@ static const u8 rtl8225_agc[] = {
 	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
 };
 
-static const u8 rtl8225_gain[] = {
-	0x23, 0x88, 0x7c, 0xa5,	/* -82dBm */
-	0x23, 0x88, 0x7c, 0xb5,	/* -82dBm */
-	0x23, 0x88, 0x7c, 0xc5,	/* -82dBm */
-	0x33, 0x80, 0x79, 0xc5,	/* -78dBm */
-	0x43, 0x78, 0x76, 0xc5,	/* -74dBm */
-	0x53, 0x60, 0x73, 0xc5,	/* -70dBm */
-	0x63, 0x58, 0x70, 0xc5,	/* -66dBm */
-};
-
-static const u8 rtl8225_tx_gain_cck_ofdm[] = {
-	0x02, 0x06, 0x0e, 0x1e, 0x3e, 0x7e
-};
-
-static const u8 rtl8225_tx_power_cck[] = {
-	0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02,
-	0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02,
-	0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02,
-	0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02,
-	0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03,
-	0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03
-};
-
-static const u8 rtl8225_tx_power_cck_ch14[] = {
-	0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00,
-	0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00,
-	0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00,
-	0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00,
-	0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00,
-	0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00
-};
-
-static const u8 rtl8225_tx_power_ofdm[] = {
-	0x80, 0x90, 0xa2, 0xb5, 0xcb, 0xe4
-};
-
 static const u32 rtl8225_chan[] = {
 	0,
 	0x0080, 0x0100, 0x0180, 0x0200, 0x0280, 0x0300, 0x0380,
 	0x0400, 0x0480, 0x0500, 0x0580, 0x0600, 0x0680, 0x074A,
 };
 
-static void rtl8225_SetTXPowerLevel(struct net_device *dev, short ch)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int GainIdx;
-	int GainSetting;
-	int i;
-	u8 power;
-	const u8 *cck_power_table;
-	u8 max_cck_power_level;
-	u8 max_ofdm_power_level;
-	u8 min_ofdm_power_level;
-	u8 cck_power_level = 0xff & priv->chtxpwr[ch];
-	u8 ofdm_power_level = 0xff & priv->chtxpwr_ofdm[ch];
-
-	max_cck_power_level = 35;
-	max_ofdm_power_level = 35;
-	min_ofdm_power_level = 0;
-
-	if (cck_power_level > max_cck_power_level)
-		cck_power_level = max_cck_power_level;
-
-	GainIdx = cck_power_level % 6;
-	GainSetting = cck_power_level / 6;
-
-	if (ch == 14)
-		cck_power_table = rtl8225_tx_power_cck_ch14;
-	else
-		cck_power_table = rtl8225_tx_power_cck;
-
-	write_nic_byte(dev, TX_GAIN_CCK,
-		       rtl8225_tx_gain_cck_ofdm[GainSetting] >> 1);
-
-	for (i = 0; i < 8; i++) {
-		power = cck_power_table[GainIdx * 8 + i];
-		write_phy_cck(dev, 0x44 + i, power);
-	}
-
-	/* FIXME Is this delay really needed ? */
-	force_pci_posting(dev);
-	mdelay(1);
-
-	if (ofdm_power_level > (max_ofdm_power_level - min_ofdm_power_level))
-		ofdm_power_level = max_ofdm_power_level;
-	else
-		ofdm_power_level += min_ofdm_power_level;
-
-	if (ofdm_power_level > 35)
-		ofdm_power_level = 35;
-
-	GainIdx = ofdm_power_level % 6;
-	GainSetting = ofdm_power_level / 6;
-
-	rtl8185_set_anaparam2(dev, RTL8225_ANAPARAM2_ON);
-
-	write_phy_ofdm(dev, 2, 0x42);
-	write_phy_ofdm(dev, 6, 0x00);
-	write_phy_ofdm(dev, 8, 0x00);
-
-	write_nic_byte(dev, TX_GAIN_OFDM,
-		       rtl8225_tx_gain_cck_ofdm[GainSetting] >> 1);
-
-	power = rtl8225_tx_power_ofdm[GainIdx];
-
-	write_phy_ofdm(dev, 5, power);
-	write_phy_ofdm(dev, 7, power);
-
-	force_pci_posting(dev);
-	mdelay(1);
-}
-
-static const u8 rtl8225z2_threshold[] = {
-	0x8d, 0x8d, 0x8d, 0x8d, 0x9d, 0xad, 0xbd,
-};
-
 static const u8 rtl8225z2_gain_bg[] = {
 	0x23, 0x15, 0xa5, /* -82-1dBm */
 	0x23, 0x15, 0xb5, /* -82-2dBm */
@@ -259,29 +132,8 @@ static const u16 rtl8225z2_rxgain[] = {
 	0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d,
 	0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9,
 	0x03aa, 0x03ab, 0x03ac, 0x03ad, 0x03b0, 0x03b1, 0x03b2, 0x03b3,
-	0x03b4, 0x03b5, 0x03b8, 0x03b9, 0x03ba, 0x03bb, 0x03bb
-
-};
+	0x03b4, 0x03b5, 0x03b8, 0x03b9, 0x03ba, 0x03bb
 
-static const u8 ZEBRA2_CCK_OFDM_GAIN_SETTING[] = {
-	0x00, 0x01, 0x02, 0x03, 0x04, 0x05,
-	0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
-	0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11,
-	0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
-	0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d,
-	0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23,
-};
-
-static const u8 rtl8225z2_tx_power_ofdm[] = {
-	0x42, 0x00, 0x40, 0x00, 0x40
-};
-
-static const u8 rtl8225z2_tx_power_cck_ch14[] = {
-	0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00
-};
-
-static const u8 rtl8225z2_tx_power_cck[] = {
-	0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04
 };
 
 void rtl8225z2_set_gain(struct net_device *dev, short gain)
@@ -412,22 +264,6 @@ static u32 read_rtl8225(struct net_device *dev, u8 adr)
 	return dataRead;
 }
 
-short rtl8225_is_V_z2(struct net_device *dev)
-{
-	short vz2 = 1;
-
-	if (read_rtl8225(dev, 8) != 0x588)
-		vz2 = 0;
-	else	/* reg 9 pg 1 = 24 */
-		if (read_rtl8225(dev, 9) != 0x700)
-			vz2 = 0;
-
-	/* sw back to pg 0 */
-	write_rtl8225(dev, 0, 0xb7);
-
-	return vz2;
-}
-
 void rtl8225z2_rf_close(struct net_device *dev)
 {
 	RF_WriteReg(dev, 0x4, 0x1f);
@@ -524,8 +360,7 @@ void rtl8225z2_SetTXPowerLevel(struct net_device *dev, short ch)
 	if (cck_power_level > 35)
 		cck_power_level = 35;
 
-	write_nic_byte(dev, CCK_TXAGC,
-		       (ZEBRA2_CCK_OFDM_GAIN_SETTING[(u8)cck_power_level]));
+	write_nic_byte(dev, CCK_TXAGC, cck_power_level);
 	force_pci_posting(dev);
 	mdelay(1);
 
@@ -540,8 +375,7 @@ void rtl8225z2_SetTXPowerLevel(struct net_device *dev, short ch)
 		write_phy_ofdm(dev, 8, 0x40);
 	}
 
-	write_nic_byte(dev, OFDM_TXAGC,
-		       ZEBRA2_CCK_OFDM_GAIN_SETTING[(u8)ofdm_power_level]);
+	write_nic_byte(dev, OFDM_TXAGC, ofdm_power_level);
 
 	if (ofdm_power_level <= 11) {
 		write_phy_ofdm(dev, 0x07, 0x5c);
@@ -592,50 +426,13 @@ static void rtl8225_host_pci_init(struct net_device *dev)
 	write_nic_word(dev, GP_ENABLE, 0xff & (~(1 << 6)));
 }
 
-static void rtl8225_rf_set_chan(struct net_device *dev, short ch)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	short gset = (priv->ieee80211->state == IEEE80211_LINKED &&
-		ieee80211_is_54g(&priv->ieee80211->current_network)) ||
-		priv->ieee80211->iw_mode == IW_MODE_MONITOR;
-
-	rtl8225_SetTXPowerLevel(dev, ch);
-
-	write_rtl8225(dev, 0x7, rtl8225_chan[ch]);
-
-	force_pci_posting(dev);
-	mdelay(10);
-
-	if (gset) {
-		write_nic_byte(dev, SIFS, 0x22);
-		write_nic_byte(dev, DIFS, 0x14);
-	} else {
-		write_nic_byte(dev, SIFS, 0x44);
-		write_nic_byte(dev, DIFS, 0x24);
-	}
-
-	if (priv->ieee80211->state == IEEE80211_LINKED &&
-	    ieee80211_is_shortslot(&priv->ieee80211->current_network))
-		write_nic_byte(dev, SLOT, 0x9);
-	else
-		write_nic_byte(dev, SLOT, 0x14);
-
-	if (gset) {
-		write_nic_byte(dev, EIFS, 81);
-		write_nic_byte(dev, CW_VAL, 0x73);
-	} else {
-		write_nic_byte(dev, EIFS, 81);
-		write_nic_byte(dev, CW_VAL, 0xa5);
-	}
-}
-
 void rtl8225z2_rf_init(struct net_device *dev)
 {
 	struct r8180_priv *priv = ieee80211_priv(dev);
 	int i;
 	short channel = 1;
-	u16	brsr;
-	u32	data, addr;
+	u16 brsr;
+	u32 data;
 
 	priv->chan = channel;
 
@@ -676,8 +473,8 @@ void rtl8225z2_rf_init(struct net_device *dev)
 
 	write_rtl8225(dev, 0x0, 0x1b7);
 
-	for (i = 0; i < 95; i++) {
-		write_rtl8225(dev, 0x1, (u8)(i + 1));
+	for (i = 0; i < ARRAY_SIZE(rtl8225z2_rxgain); i++) {
+		write_rtl8225(dev, 0x1, i + 1);
 		write_rtl8225(dev, 0x2, rtl8225z2_rxgain[i]);
 	}
 
@@ -707,14 +504,12 @@ void rtl8225z2_rf_init(struct net_device *dev)
 
 	write_rtl8225(dev, 0x0, 0x2bf);
 
-	for (i = 0; i < 128; i++) {
-		data = rtl8225_agc[i];
-
-		addr = i + 0x80; /* enable writing AGC table */
-		write_phy_ofdm(dev, 0xb, data);
+	for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) {
+		write_phy_ofdm(dev, 0xb, rtl8225_agc[i]);
 		mdelay(1);
 
-		write_phy_ofdm(dev, 0xa, addr);
+		/* enable writing AGC table */
+		write_phy_ofdm(dev, 0xa, i + 0x80);
 		mdelay(1);
 	}
 
@@ -808,7 +603,7 @@ void rtl8225z2_rf_init(struct net_device *dev)
 	write_nic_dword(dev, 0x94, 0x15c00002);
 	rtl8185_rf_pins_enable(dev);
 
-	rtl8225_rf_set_chan(dev, priv->chan);
+	rtl8225z2_rf_set_chan(dev, priv->chan);
 }
 
 void rtl8225z2_rf_set_mode(struct net_device *dev)