diff options
author | Russell King <rmk+kernel@arm.linux.org.uk> | 2009-09-22 19:54:53 (GMT) |
---|---|---|
committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2009-09-22 20:01:40 (GMT) |
commit | ae19ffbadc1b2100285a5b5b3d0a4e0a11390904 (patch) | |
tree | 3c2086ab67398a019089a47ca3f362a4bc6db74f /drivers/staging/rtl8192su/r8192S_phy.c | |
parent | 34e84f39a27d059a3e6ec6e8b94aafa702e6f220 (diff) | |
parent | 9173a8ef24a6b1b8031507b35b8ffe5f85a87692 (diff) | |
download | linux-fsl-qoriq-ae19ffbadc1b2100285a5b5b3d0a4e0a11390904.tar.xz |
Merge branch 'master' into for-linus
Diffstat (limited to 'drivers/staging/rtl8192su/r8192S_phy.c')
-rw-r--r-- | drivers/staging/rtl8192su/r8192S_phy.c | 947 |
1 files changed, 1 insertions, 946 deletions
diff --git a/drivers/staging/rtl8192su/r8192S_phy.c b/drivers/staging/rtl8192su/r8192S_phy.c index 99a4051a..2c111d7 100644 --- a/drivers/staging/rtl8192su/r8192S_phy.c +++ b/drivers/staging/rtl8192su/r8192S_phy.c @@ -35,21 +35,12 @@ #include "r8192U_dm.h" #include "r8192S_rtl6052.h" -#ifdef RTL8192SU #include "r8192S_hw.h" #include "r8192S_phy.h" #include "r8192S_phyreg.h" #include "r8192SU_HWImg.h" -//#include "r8192S_FwImgDTM.h" -#else -#include "r8192U_hw.h" -#include "r819xU_phy.h" -#include "r819xU_phyreg.h" -#endif -#ifdef ENABLE_DOT11D -#include "dot11d.h" -#endif +#include "ieee80211/dot11d.h" /*---------------------------Define Local Constant---------------------------*/ /* Channel switch:The size of command tables for switch channel*/ @@ -60,26 +51,6 @@ /*------------------------Define local variable------------------------------*/ // 2004-05-11 -#ifndef RTL8192SU -static u32 RF_CHANNEL_TABLE_ZEBRA[]={ - 0, - 0x085c,//2412 1 - 0x08dc,//2417 2 - 0x095c,//2422 3 - 0x09dc,//2427 4 - 0x0a5c,//2432 5 - 0x0adc,//2437 6 - 0x0b5c,//2442 7 - 0x0bdc,//2447 8 - 0x0c5c,//2452 9 - 0x0cdc,//2457 10 - 0x0d5c,//2462 11 - 0x0ddc,//2467 12 - 0x0e5c,//2472 13 - //0x0f5c,//2484 - 0x0f72,//2484 //20040810 -}; -#endif static u32 phy_CalculateBitShift(u32 BitMask); @@ -111,18 +82,11 @@ phy_SwChnlStepByStep( ); static RT_STATUS phy_ConfigBBWithPgHeaderFile(struct net_device* dev,u8 ConfigType); -#ifdef RTL8192SE -static u32 phy_FwRFSerialRead( struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset); -static u32 phy_RFSerialRead(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32 Offset); -static void phy_FwRFSerialWrite( struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data); -static void phy_RFSerialWrite( struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data); -#endif static long phy_TxPwrIdxToDbm( struct net_device* dev, WIRELESS_MODE WirelessMode, u8 TxPwrIdx); static u8 phy_DbmToTxPwrIdx( struct net_device* dev, WIRELESS_MODE WirelessMode, long PowerInDbm); void phy_SetFwCmdIOCallback(struct net_device* dev); //#if ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==USB_INTERFACE)) -#ifdef RTL8192SU // // Description: // Base Band read by 4181 to make sure that operation could be done in unlimited cycle. @@ -390,7 +354,6 @@ void phy_SetUsbRFReg(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32 RegAdd } -#endif /*---------------------Define local function prototype-----------------------*/ @@ -420,9 +383,6 @@ u32 rtl8192_QueryBBReg(struct net_device* dev, u32 RegAddr, u32 BitMask) u32 ReturnValue = 0, OriginalValue, BitShift; -#if (DISABLE_BB_RF == 1) - return 0; -#endif RT_TRACE(COMP_RF, "--->PHY_QueryBBReg(): RegAddr(%#x), BitMask(%#x)\n", RegAddr, BitMask); @@ -433,7 +393,6 @@ u32 rtl8192_QueryBBReg(struct net_device* dev, u32 RegAddr, u32 BitMask) // 2008.09.06. // //#if ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==USB_INTERFACE)) -#ifdef RTL8192SU if(IS_BB_REG_OFFSET_92S(RegAddr)) { //if(RT_USB_CANNOT_IO(Adapter)) return FALSE; @@ -447,7 +406,6 @@ u32 rtl8192_QueryBBReg(struct net_device* dev, u32 RegAddr, u32 BitMask) OriginalValue = phy_QueryUsbBBReg(dev, RegAddr); } else -#endif { OriginalValue = read_nic_dword(dev, RegAddr); } @@ -483,9 +441,6 @@ void rtl8192_setBBreg(struct net_device* dev, u32 RegAddr, u32 BitMask, u32 Data { u32 OriginalValue, BitShift, NewValue; -#if (DISABLE_BB_RF == 1) - return; -#endif RT_TRACE(COMP_RF, "--->PHY_SetBBReg(): RegAddr(%#x), BitMask(%#x), Data(%#x)\n", RegAddr, BitMask, Data); @@ -496,7 +451,6 @@ void rtl8192_setBBreg(struct net_device* dev, u32 RegAddr, u32 BitMask, u32 Data // 2008.09.06. // //#if ((HAL_CODE_BASE == RTL8192_S) && (DEV_BUS_TYPE==USB_INTERFACE)) -#ifdef RTL8192SU if(IS_BB_REG_OFFSET_92S(RegAddr)) { if((RegAddr & 0x03) != 0) @@ -515,7 +469,6 @@ void rtl8192_setBBreg(struct net_device* dev, u32 RegAddr, u32 BitMask, u32 Data phy_SetUsbBBReg(dev, RegAddr, Data); } else -#endif { if(BitMask!= bMaskDWord) {//if not "double word" write @@ -559,9 +512,6 @@ u32 rtl8192_phy_QueryRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u3 u32 Original_Value, Readback_Value, BitShift;//, flags; struct r8192_priv *priv = ieee80211_priv(dev); -#if (DISABLE_BB_RF == 1) - return 0; -#endif RT_TRACE(COMP_RF, "--->PHY_QueryRFReg(): RegAddr(%#x), eRFPath(%#x), BitMask(%#x)\n", RegAddr, eRFPath,BitMask); @@ -588,19 +538,8 @@ u32 rtl8192_phy_QueryRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u3 // 2008.09.06. // //#if (HAL_CODE_BASE == RTL8192_S && DEV_BUS_TYPE==USB_INTERFACE) -#ifdef RTL8192SU //if(RT_USB_CANNOT_IO(Adapter)) return FALSE; Original_Value = phy_QueryUsbRFReg(dev, eRFPath, RegAddr); -#else - if (priv->Rf_Mode == RF_OP_By_FW) - { - Original_Value = phy_FwRFSerialRead(dev, eRFPath, RegAddr); - } - else - { - Original_Value = phy_RFSerialRead(dev, eRFPath, RegAddr); - } -#endif BitShift = phy_CalculateBitShift(BitMask); Readback_Value = (Original_Value & BitMask) >> BitShift; @@ -638,9 +577,6 @@ void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 struct r8192_priv *priv = ieee80211_priv(dev); u32 Original_Value, BitShift, New_Value;//, flags; -#if (DISABLE_BB_RF == 1) - return; -#endif RT_TRACE(COMP_RF, "--->PHY_SetRFReg(): RegAddr(%#x), BitMask(%#x), Data(%#x), eRFPath(%#x)\n", RegAddr, BitMask, Data, eRFPath); @@ -667,7 +603,6 @@ void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 // 2008.09.06. // //#if (HAL_CODE_BASE == RTL8192_S && DEV_BUS_TYPE==USB_INTERFACE) -#ifdef RTL8192SU //if(RT_USB_CANNOT_IO(Adapter)) return; if (BitMask != bRFRegOffsetMask) // RF data is 12 bits only @@ -679,37 +614,6 @@ void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 } else phy_SetUsbRFReg(dev, eRFPath, RegAddr, Data); -#else - if (priv->Rf_Mode == RF_OP_By_FW) - { - //DbgPrint("eRFPath-%d Addr[%02x] = %08x\n", eRFPath, RegAddr, Data); - if (BitMask != bRFRegOffsetMask) // RF data is 12 bits only - { - Original_Value = phy_FwRFSerialRead(dev, eRFPath, RegAddr); - BitShift = phy_CalculateBitShift(BitMask); - New_Value = (((Original_Value) & (~BitMask)) | (Data<< BitShift)); - - phy_FwRFSerialWrite(dev, eRFPath, RegAddr, New_Value); - } - else - phy_FwRFSerialWrite(dev, eRFPath, RegAddr, Data); - } - else - { - //DbgPrint("eRFPath-%d Addr[%02x] = %08x\n", eRFPath, RegAddr, Data); - if (BitMask != bRFRegOffsetMask) // RF data is 12 bits only - { - Original_Value = phy_RFSerialRead(dev, eRFPath, RegAddr); - BitShift = phy_CalculateBitShift(BitMask); - New_Value = (((Original_Value) & (~BitMask)) | (Data<< BitShift)); - - phy_RFSerialWrite(dev, eRFPath, RegAddr, New_Value); - } - else - phy_RFSerialWrite(dev, eRFPath, RegAddr, Data); - - } -#endif //PlatformReleaseSpinLock(dev, RT_RF_OPERATE_SPINLOCK); //spin_unlock_irqrestore(&priv->rf_lock, flags); //YJ,test,090113 up(&priv->rf_sem); @@ -719,579 +623,6 @@ void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 } -#ifdef RTL8192SE -/*----------------------------------------------------------------------------- - * Function: phy_FwRFSerialRead() - * - * Overview: We support firmware to execute RF-R/W. - * - * Input: NONE - * - * Output: NONE - * - * Return: NONE - * - * Revised History: - * When Who Remark - * 01/21/2008 MHC Create Version 0. - * - *---------------------------------------------------------------------------*/ -//use in phy only -static u32 -phy_FwRFSerialRead( - struct net_device* dev, - RF90_RADIO_PATH_E eRFPath, - u32 Offset ) -{ - u32 retValue = 0; - //u32 Data = 0; - //u8 time = 0; -#if 0 - //DbgPrint("FW RF CTRL\n\r"); - /* 2007/11/02 MH Firmware RF Write control. By Francis' suggestion, we can - not execute the scheme in the initial step. Otherwise, RF-R/W will waste - much time. This is only for site survey. */ - // 1. Read operation need not insert data. bit 0-11 - //Data &= bMask12Bits; - // 2. Write RF register address. Bit 12-19 - Data |= ((Offset&0xFF)<<12); - // 3. Write RF path. bit 20-21 - Data |= ((eRFPath&0x3)<<20); - // 4. Set RF read indicator. bit 22=0 - //Data |= 0x00000; - // 5. Trigger Fw to operate the command. bit 31 - Data |= 0x80000000; - // 6. We can not execute read operation if bit 31 is 1. - while (PlatformIORead4Byte(dev, QPNR)&0x80000000) - { - // If FW can not finish RF-R/W for more than ?? times. We must reset FW. - if (time++ < 100) - { - //DbgPrint("FW not finish RF-R Time=%d\n\r", time); - delay_us(10); - } - else - break; - } - // 7. Execute read operation. - PlatformIOWrite4Byte(dev, QPNR, Data); - // 8. Check if firmawre send back RF content. - while (PlatformIORead4Byte(dev, QPNR)&0x80000000) - { - // If FW can not finish RF-R/W for more than ?? times. We must reset FW. - if (time++ < 100) - { - //DbgPrint("FW not finish RF-W Time=%d\n\r", time); - delay_us(10); - } - else - return (0); - } - retValue = PlatformIORead4Byte(dev, RF_DATA); -#endif - return (retValue); - -} /* phy_FwRFSerialRead */ - -/*----------------------------------------------------------------------------- - * Function: phy_FwRFSerialWrite() - * - * Overview: We support firmware to execute RF-R/W. - * - * Input: NONE - * - * Output: NONE - * - * Return: NONE - * - * Revised History: - * When Who Remark - * 01/21/2008 MHC Create Version 0. - * - *---------------------------------------------------------------------------*/ -//use in phy only -static void -phy_FwRFSerialWrite( - struct net_device* dev, - RF90_RADIO_PATH_E eRFPath, - u32 Offset, - u32 Data ) -{ -#if 0 - u8 time = 0; - DbgPrint("N FW RF CTRL RF-%d OF%02x DATA=%03x\n\r", eRFPath, Offset, Data); - /* 2007/11/02 MH Firmware RF Write control. By Francis' suggestion, we can - not execute the scheme in the initial step. Otherwise, RF-R/W will waste - much time. This is only for site survey. */ - - // 1. Set driver write bit and 12 bit data. bit 0-11 - //Data &= bMask12Bits; // Done by uper layer. - // 2. Write RF register address. bit 12-19 - Data |= ((Offset&0xFF)<<12); - // 3. Write RF path. bit 20-21 - Data |= ((eRFPath&0x3)<<20); - // 4. Set RF write indicator. bit 22=1 - Data |= 0x400000; - // 5. Trigger Fw to operate the command. bit 31=1 - Data |= 0x80000000; - - // 6. Write operation. We can not write if bit 31 is 1. - while (PlatformIORead4Byte(dev, QPNR)&0x80000000) - { - // If FW can not finish RF-R/W for more than ?? times. We must reset FW. - if (time++ < 100) - { - //DbgPrint("FW not finish RF-W Time=%d\n\r", time); - delay_us(10); - } - else - break; - } - // 7. No matter check bit. We always force the write. Because FW will - // not accept the command. - PlatformIOWrite4Byte(dev, QPNR, Data); - /* 2007/11/02 MH Acoording to test, we must delay 20us to wait firmware - to finish RF write operation. */ - /* 2008/01/17 MH We support delay in firmware side now. */ - //delay_us(20); -#endif -} /* phy_FwRFSerialWrite */ - -/** -* Function: phy_RFSerialRead -* -* OverView: Read regster from RF chips -* -* Input: -* PADAPTER Adapter, -* RF90_RADIO_PATH_E eRFPath, //Radio path of A/B/C/D -* u32 Offset, //The target address to be read -* -* Output: None -* Return: u32 reback value -* Note: Threre are three types of serial operations: -* 1. Software serial write -* 2. Hardware LSSI-Low Speed Serial Interface -* 3. Hardware HSSI-High speed -* serial write. Driver need to implement (1) and (2). -* This function is equal to the combination of RF_ReadReg() and RFLSSIRead() -*/ -//use in phy only -static u32 phy_RFSerialRead(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32 Offset) -{ - - u32 retValue = 0; - struct r8192_priv *priv = ieee80211_priv(dev); - BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath]; - u32 NewOffset; - u8 RfPiEnable=0; - - - // - // Make sure RF register offset is correct - // - Offset &= 0x3f; - - // - // Switch page for 8256 RF IC - // - if( priv->rf_chip == RF_8256 || - priv->rf_chip == RF_8225 || - priv->rf_chip == RF_6052) - { - //analog to digital off, for protection - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8] - - if(Offset>=31) - { - priv->RFReadPageCnt[2]++;//cosa add for debug - priv->RfReg0Value[eRFPath] |= 0x140; - - // Switch to Reg_Mode2 for Reg31~45 - rtl8192_setBBreg(dev, - pPhyReg->rf3wireOffset, - bMaskDWord, - (priv->RfReg0Value[eRFPath] << 16) ); - - // Modified Offset - NewOffset = Offset - 30; - - }else if(Offset>=16) - { - priv->RFReadPageCnt[1]++;//cosa add for debug - priv->RfReg0Value[eRFPath] |= 0x100; - priv->RfReg0Value[eRFPath] &= (~0x40); - - // Switch to Reg_Mode1 for Reg16~30 - rtl8192_setBBreg(dev, - pPhyReg->rf3wireOffset, - bMaskDWord, - (priv->RfReg0Value[eRFPath] << 16) ); - - // Modified Offset - NewOffset = Offset - 15; - } - else - { - priv->RFReadPageCnt[0]++;//cosa add for debug - NewOffset = Offset; - } - } - else - NewOffset = Offset; - - // - // Put desired read address to LSSI control register - // - rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadAddress, NewOffset); - - // - // Issue a posedge trigger - // - rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x0); - rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x1); - - // TODO: we should not delay such a long time. Ask help from SD3 - mdelay(1); - - retValue = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData); - - // Switch back to Reg_Mode0; - if( priv->rf_chip == RF_8256 || - priv->rf_chip == RF_8225 || - priv->rf_chip == RF_0222D) - { - if (Offset >= 0x10) - { - priv->RfReg0Value[eRFPath] &= 0xebf; - - rtl8192_setBBreg( - dev, - pPhyReg->rf3wireOffset, - bMaskDWord, - (priv->RfReg0Value[eRFPath] << 16) ); - } - - //analog to digital on - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0xf);// 0x88c[11:8] - } - - return retValue; -} - - - -/** -* Function: phy_RFSerialWrite -* -* OverView: Write data to RF register (page 8~) -* -* Input: -* PADAPTER Adapter, -* RF90_RADIO_PATH_E eRFPath, //Radio path of A/B/C/D -* u32 Offset, //The target address to be read -* u32 Data //The new register Data in the target bit position -* //of the target to be read -* -* Output: None -* Return: None -* Note: Threre are three types of serial operations: -* 1. Software serial write -* 2. Hardware LSSI-Low Speed Serial Interface -* 3. Hardware HSSI-High speed -* serial write. Driver need to implement (1) and (2). -* This function is equal to the combination of RF_ReadReg() and RFLSSIRead() - * - * Note: For RF8256 only - * The total count of RTL8256(Zebra4) register is around 36 bit it only employs - * 4-bit RF address. RTL8256 uses "register mode control bit" (Reg00[12], Reg00[10]) - * to access register address bigger than 0xf. See "Appendix-4 in PHY Configuration - * programming guide" for more details. - * Thus, we define a sub-finction for RTL8526 register address conversion - * =========================================================== - * Register Mode RegCTL[1] RegCTL[0] Note - * (Reg00[12]) (Reg00[10]) - * =========================================================== - * Reg_Mode0 0 x Reg 0 ~15(0x0 ~ 0xf) - * ------------------------------------------------------------------ - * Reg_Mode1 1 0 Reg 16 ~30(0x1 ~ 0xf) - * ------------------------------------------------------------------ - * Reg_Mode2 1 1 Reg 31 ~ 45(0x1 ~ 0xf) - * ------------------------------------------------------------------ -*/ -////use in phy only -static void -phy_RFSerialWrite( - struct net_device* dev, - RF90_RADIO_PATH_E eRFPath, - u32 Offset, - u32 Data - ) -{ - u32 DataAndAddr = 0; - struct r8192_priv *priv = ieee80211_priv(dev); - BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath]; - u32 NewOffset; - - Offset &= 0x3f; - - // Shadow Update - PHY_RFShadowWrite(dev, eRFPath, Offset, Data); - - - // Switch page for 8256 RF IC - if( priv->rf_chip == RF_8256 || - priv->rf_chip == RF_8225 || - priv->rf_chip == RF_0222D) - { - //analog to digital off, for protection - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8] - - if(Offset>=31) - { - priv->RFWritePageCnt[2]++;//cosa add for debug - priv->RfReg0Value[eRFPath] |= 0x140; - - rtl8192_setBBreg(dev, - pPhyReg->rf3wireOffset, - bMaskDWord, - (priv->RfReg0Value[eRFPath] << 16) ); - - NewOffset = Offset - 30; - - }else if(Offset>=16) - { - priv->RFWritePageCnt[1]++;//cosa add for debug - priv->RfReg0Value[eRFPath] |= 0x100; - priv->RfReg0Value[eRFPath] &= (~0x40); - - - rtl8192_setBBreg(dev, - pPhyReg->rf3wireOffset, - bMaskDWord, - (priv->RfReg0Value[eRFPath] << 16) ); - - NewOffset = Offset - 15; - } - else - { - priv->RFWritePageCnt[0]++;//cosa add for debug - NewOffset = Offset; - } - } - else - NewOffset = Offset; - - // - // Put write addr in [5:0] and write data in [31:16] - // - DataAndAddr = (Data<<16) | (NewOffset&0x3f); - - // - // Write Operation - // - rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, DataAndAddr); - - - if(Offset==0x0) - priv->RfReg0Value[eRFPath] = Data; - - // Switch back to Reg_Mode0; - if( priv->rf_chip == RF_8256 || - priv->rf_chip == RF_8225 || - priv->rf_chip == RF_0222D) - { - if (Offset >= 0x10) - { - if(Offset != 0) - { - priv->RfReg0Value[eRFPath] &= 0xebf; - rtl8192_setBBreg( - dev, - pPhyReg->rf3wireOffset, - bMaskDWord, - (priv->RfReg0Value[eRFPath] << 16) ); - } - } - //analog to digital on - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0xf);// 0x88c[11:8] - } - -} -#else -/** -* Function: phy_RFSerialRead -* -* OverView: Read regster from RF chips -* -* Input: -* PADAPTER Adapter, -* RF90_RADIO_PATH_E eRFPath, //Radio path of A/B/C/D -* u4Byte Offset, //The target address to be read -* -* Output: None -* Return: u4Byte reback value -* Note: Threre are three types of serial operations: -* 1. Software serial write -* 2. Hardware LSSI-Low Speed Serial Interface -* 3. Hardware HSSI-High speed -* serial write. Driver need to implement (1) and (2). -* This function is equal to the combination of RF_ReadReg() and RFLSSIRead() -*/ -#if 0 -static u32 -phy_RFSerialRead(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32 Offset) -{ - - u32 retValue = 0; - struct r8192_priv *priv = ieee80211_priv(dev); - BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath]; - u32 NewOffset; - //u32 value = 0; - u32 tmplong,tmplong2; - u32 RfPiEnable=0; -#if 0 - if(pHalData->RFChipID == RF_8225 && Offset > 0x24) //36 valid regs - return retValue; - if(pHalData->RFChipID == RF_8256 && Offset > 0x2D) //45 valid regs - return retValue; -#endif - // - // Make sure RF register offset is correct - // - Offset &= 0x3f; - - // - // Switch page for 8256 RF IC - // - NewOffset = Offset; - - // For 92S LSSI Read RFLSSIRead - // For RF A/B write 0x824/82c(does not work in the future) - // We must use 0x824 for RF A and B to execute read trigger - tmplong = rtl8192_QueryBBReg(dev, rFPGA0_XA_HSSIParameter2, bMaskDWord); - tmplong2 = rtl8192_QueryBBReg(dev, pPhyReg->rfHSSIPara2, bMaskDWord); - tmplong2 = (tmplong2 & (~bLSSIReadAddress)) | (NewOffset<<23) | bLSSIReadEdge; //T65 RF - - rtl8192_setBBreg(dev, rFPGA0_XA_HSSIParameter2, bMaskDWord, tmplong&(~bLSSIReadEdge)); - mdelay(1); - - rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bMaskDWord, tmplong2); - mdelay(1); - - rtl8192_setBBreg(dev, rFPGA0_XA_HSSIParameter2, bMaskDWord, tmplong|bLSSIReadEdge); - mdelay(1); - - if(eRFPath == RF90_PATH_A) - RfPiEnable = (u8)rtl8192_QueryBBReg(dev, rFPGA0_XA_HSSIParameter1, BIT8); - else if(eRFPath == RF90_PATH_B) - RfPiEnable = (u8)rtl8192_QueryBBReg(dev, rFPGA0_XB_HSSIParameter1, BIT8); - - if(RfPiEnable) - { // Read from BBreg8b8, 12 bits for 8190, 20bits for T65 RF - retValue = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBackPi, bLSSIReadBackData); - //DbgPrint("Readback from RF-PI : 0x%x\n", retValue); - } - else - { //Read from BBreg8a0, 12 bits for 8190, 20 bits for T65 RF - retValue = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData); - //DbgPrint("Readback from RF-SI : 0x%x\n", retValue); - } - //RTPRINT(FPHY, PHY_RFR, ("RFR-%d Addr[0x%x]=0x%x\n", eRFPath, pPhyReg->rfLSSIReadBack, retValue)); - - return retValue; - -} -4 - - -/** -* Function: phy_RFSerialWrite -* -* OverView: Write data to RF register (page 8~) -* -* Input: -* PADAPTER Adapter, -* RF90_RADIO_PATH_E eRFPath, //Radio path of A/B/C/D -* u4Byte Offset, //The target address to be read -* u4Byte Data //The new register Data in the target bit position -* //of the target to be read -* -* Output: None -* Return: None -* Note: Threre are three types of serial operations: -* 1. Software serial write -* 2. Hardware LSSI-Low Speed Serial Interface -* 3. Hardware HSSI-High speed -* serial write. Driver need to implement (1) and (2). -* This function is equal to the combination of RF_ReadReg() and RFLSSIRead() - * - * Note: For RF8256 only - * The total count of RTL8256(Zebra4) register is around 36 bit it only employs - * 4-bit RF address. RTL8256 uses "register mode control bit" (Reg00[12], Reg00[10]) - * to access register address bigger than 0xf. See "Appendix-4 in PHY Configuration - * programming guide" for more details. - * Thus, we define a sub-finction for RTL8526 register address conversion - * =========================================================== - * Register Mode RegCTL[1] RegCTL[0] Note - * (Reg00[12]) (Reg00[10]) - * =========================================================== - * Reg_Mode0 0 x Reg 0 ~15(0x0 ~ 0xf) - * ------------------------------------------------------------------ - * Reg_Mode1 1 0 Reg 16 ~30(0x1 ~ 0xf) - * ------------------------------------------------------------------ - * Reg_Mode2 1 1 Reg 31 ~ 45(0x1 ~ 0xf) - * ------------------------------------------------------------------ - * - * 2008/09/02 MH Add 92S RF definition - * - * - * -*/ -static void -phy_RFSerialWrite(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32 Offset,u32 Data) -{ - u32 DataAndAddr = 0; - struct r8192_priv *priv = ieee80211_priv(dev); - BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath]; - u32 NewOffset; - -#if 0 - //<Roger_TODO> We should check valid regs for RF_6052 case. - if(pHalData->RFChipID == RF_8225 && Offset > 0x24) //36 valid regs - return; - if(pHalData->RFChipID == RF_8256 && Offset > 0x2D) //45 valid regs - return; -#endif - - Offset &= 0x3f; - - // - // Shadow Update - // - PHY_RFShadowWrite(dev, eRFPath, Offset, Data); - - // - // Switch page for 8256 RF IC - // - NewOffset = Offset; - - // - // Put write addr in [5:0] and write data in [31:16] - // - //DataAndAddr = (Data<<16) | (NewOffset&0x3f); - DataAndAddr = ((NewOffset<<20) | (Data&0x000fffff)) & 0x0fffffff; // T65 RF - - // - // Write Operation - // - rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, DataAndAddr); - //RTPRINT(FPHY, PHY_RFW, ("RFW-%d Addr[0x%x]=0x%x\n", eRFPath, pPhyReg->rf3wireOffset, DataAndAddr)); - -} -#endif -#endif - /** * Function: phy_CalculateBitShift * @@ -1345,13 +676,7 @@ extern bool PHY_MACConfig8192S(struct net_device* dev) // // Config MAC // -#if RTL8190_Download_Firmware_From_Header rtStatus = phy_ConfigMACWithHeaderFile(dev); -#else - // Not make sure EEPROM, add later - RT_TRACE(COMP_INIT, "Read MACREG.txt\n"); - //rtStatus = phy_ConfigMACWithParaFile(dev, RTL819X_PHY_MACREG);// lzm del it temp -#endif return (rtStatus == RT_STATUS_SUCCESS) ? true:false; } @@ -1559,7 +884,6 @@ phy_BB8192S_Config_ParaFile(struct net_device* dev) // 1. Read PHY_REG.TXT BB INIT!! // We will seperate as 1T1R/1T2R/1T2R_GREEN/2T2R // -#if RTL8190_Download_Firmware_From_Header if (priv->rf_type == RF_1T2R || priv->rf_type == RF_2T2R || priv->rf_type == RF_1T1R ||priv->rf_type == RF_2T2R_GREEN) { @@ -1571,26 +895,6 @@ phy_BB8192S_Config_ParaFile(struct net_device* dev) } }else rtStatus = RT_STATUS_FAILURE; -#else - RT_TRACE(COMP_INIT, "RF_Type == %d\n", priv->rf_type); - // No matter what kind of RF we always read PHY_REG.txt. We must copy different - // type of parameter files to phy_reg.txt at first. - if (priv->rf_type == RF_1T2R || priv->rf_type == RF_2T2R || - priv->rf_type == RF_1T1R ||priv->rf_type == RF_2T2R_GREEN) - { - rtStatus = phy_ConfigBBWithParaFile(dev, (char* )&szBBRegFile); - if(priv->rf_type != RF_2T2R && priv->rf_type != RF_2T2R_GREEN) - {//2008.11.10 Added by tynli. The default PHY_REG.txt we read is for 2T2R, - //so we should reconfig BB reg with the right PHY parameters. - if(priv->rf_type == RF_1T1R) - rtStatus = phy_SetBBtoDiffRFWithParaFile(dev, (char* )&szBBRegto1T1RFile); - else if(priv->rf_type == RF_1T2R) - rtStatus = phy_SetBBtoDiffRFWithParaFile(dev, (char* )&szBBRegto1T2RFile); - } - - }else - rtStatus = RT_STATUS_FAILURE; -#endif if(rtStatus != RT_STATUS_SUCCESS){ RT_TRACE(COMP_INIT, "phy_BB8192S_Config_ParaFile():Write BB Reg Fail!!"); @@ -1602,11 +906,7 @@ phy_BB8192S_Config_ParaFile(struct net_device* dev) // if (priv->AutoloadFailFlag == false) { -#if RTL8190_Download_Firmware_From_Header rtStatus = phy_ConfigBBWithPgHeaderFile(dev,BaseBand_Config_PHY_REG); -#else - rtStatus = phy_ConfigBBWithPgParaFile(dev, (char* )&szBBRegPgFile); -#endif } if(rtStatus != RT_STATUS_SUCCESS){ RT_TRACE(COMP_INIT, "phy_BB8192S_Config_ParaFile():BB_PG Reg Fail!!"); @@ -1616,12 +916,7 @@ phy_BB8192S_Config_ParaFile(struct net_device* dev) // // 3. BB AGC table Initialization // -#if RTL8190_Download_Firmware_From_Header rtStatus = phy_ConfigBBWithHeaderFile(dev,BaseBand_Config_AGC_TAB); -#else - RT_TRACE(COMP_INIT, "phy_BB8192S_Config_ParaFile AGC_TAB.txt\n"); - rtStatus = phy_ConfigBBWithParaFile(Adapter, (char* )&szAGCTableFile); -#endif if(rtStatus != RT_STATUS_SUCCESS){ printk( "phy_BB8192S_Config_ParaFile():AGC Table Fail\n"); @@ -1629,33 +924,6 @@ phy_BB8192S_Config_ParaFile(struct net_device* dev) } -#if 0 // 2008/08/18 MH Disable for 92SE - if(pHalData->VersionID > VERSION_8190_BD) - { - //if(pHalData->RF_Type == RF_2T4R) - //{ - // Antenna gain offset from B/C/D to A - u4RegValue = ( pHalData->AntennaTxPwDiff[2]<<8 | - pHalData->AntennaTxPwDiff[1]<<4 | - pHalData->AntennaTxPwDiff[0]); - //} - //else - //u4RegValue = 0; - - PHY_SetBBReg(dev, rFPGA0_TxGainStage, - (bXBTxAGC|bXCTxAGC|bXDTxAGC), u4RegValue); - - // CrystalCap - // Simulate 8192??? - u4RegValue = pHalData->CrystalCap; - PHY_SetBBReg(dev, rFPGA0_AnalogParameter1, bXtalCap92x, u4RegValue); - // Simulate 8190?? - //u4RegValue = ((pHalData->CrystalCap & 0xc)>>2); // bit2~3 of crystal cap - //PHY_SetBBReg(Adapter, rFPGA0_AnalogParameter2, bXtalCap23, u4RegValue); - - } -#endif - // Check if the CCK HighPower is turned ON. // This is used to calculate PWDB. priv->bCckHighPower = (bool)(rtl8192_QueryBBReg(dev, rFPGA0_XA_HSSIParameter2, 0x200)); @@ -1934,11 +1202,7 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E if(Rtl819XRadioA_Array_Table[i] == 0xfe) { // Deay specific ms. Only RF configuration require delay. //#if (DEV_BUS_TYPE == USB_INTERFACE) -#ifdef RTL8192SU mdelay(1000); -#else - mdelay(50); -#endif } else if (Rtl819XRadioA_Array_Table[i] == 0xfd) mdelay(5); @@ -1962,11 +1226,7 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E if(Rtl819XRadioB_Array_Table[i] == 0xfe) { // Deay specific ms. Only RF configuration require delay. //#if (DEV_BUS_TYPE == USB_INTERFACE) -#ifdef RTL8192SU mdelay(1000); -#else - mdelay(50); -#endif } else if (Rtl819XRadioB_Array_Table[i] == 0xfd) mdelay(5); @@ -2435,29 +1695,6 @@ static bool phy_SetRFPowerState8192SU(struct net_device* dev,RT_RF_POWER_STATE e case eRfOff: if (priv->ieee80211->eRFPowerState == eRfSleep || priv->ieee80211->eRFPowerState == eRfOff) break; -#ifdef NOT_YET - // Make sure BusyQueue is empty befor turn off RFE pwoer. - for(QueueID = 0, i = 0; QueueID < MAX_TX_QUEUE; ) - { - if(RTIsListEmpty(&Adapter->TcbBusyQueue[QueueID])) - { - QueueID++; - continue; - } - else - { - RT_TRACE(COMP_POWER, "eRf Off/Sleep: %d times TcbBusyQueue[%d] !=0 before doze!\n", (i+1), QueueID); - udelay(10); - i++; - } - - if(i >= MAX_DOZE_WAITING_TIMES_9x) - { - RT_TRACE(COMP_POWER, "\n\n\n SetZebraRFPowerState8185B(): eRfOff: %d times TcbBusyQueue[%d] != 0 !!!\n\n\n", MAX_DOZE_WAITING_TIMES_9x, QueueID); - break; - } - } -#endif // //RF Off/Sleep sequence. Designed/tested from SD4 Scott, SD1 Grent and Jonbon. // Added by Bruce, 2008-11-22. @@ -2641,10 +1878,6 @@ PHY_GetTxPowerLevel8192S( // // if(priv->epromtype == EPROM_93c46) { -#ifdef EEPROM_OLD_FORMAT_SUPPORT - powerlevel = priv->TxPowerLevelCCK[index]; - powerlevelOFDM24G = priv->TxPowerLevelOFDM24G[index]; -#else // // Mainly we use RF-A Tx Power to write the Tx Power registers, but the RF-B Tx // Power must be calculated by the antenna diff. @@ -2706,18 +1939,10 @@ PHY_GetTxPowerLevel8192S( // Calculate Antenna pwr diff if (pwrdiff[rfpath] < 8) // 0~+7 { - #if 0//cosa, it doesn't need to add the offset here - if (rfpath == 0) - powerlevelOFDM24G += pwrdiff[rfpath]; - #endif ht20pwr[rfpath] += pwrdiff[rfpath]; } else // index8-15=-8~-1 { - #if 0//cosa, it doesn't need to add the offset here - if (rfpath == 0) - powerlevelOFDM24G -= (15-pwrdiff[rfpath]); - #endif ht20pwr[rfpath] -= (15-pwrdiff[rfpath]); } } @@ -2759,10 +1984,6 @@ PHY_GetTxPowerLevel8192S( ht20pwr[rfpath] -= pwrdiff[rfpath]; } - #if 0//cosa, it doesn't need to add the offset here - if (rfpath == 0) - powerlevelOFDM24G -= pwrdiff[rfpath]; - #endif } if (priv->rf_type == RF_2T2R) @@ -2792,10 +2013,6 @@ PHY_GetTxPowerLevel8192S( } } } -#if 0//cosa, useless - // Read HT/Legacy OFDM diff - legacy_ant_pwr_diff= pHalData->TxPwrLegacyHtDiff[RF90_PATH_A][index]; -#endif } //Cosa added for protection, the reg rFPGA0_TxGainStage @@ -2823,7 +2040,6 @@ PHY_GetTxPowerLevel8192S( // Notify Tx power difference for B/C/D to A!!! rtl8192_setBBreg(dev, rFPGA0_TxGainStage, (bXBTxAGC|bXCTxAGC|bXDTxAGC), u4RegValue); -#endif } // @@ -2885,10 +2101,6 @@ PHY_GetTxPowerLevel8192S( break; case RF_8256: -#if 0 - PHY_SetRF8256CCKTxPower(dev, powerlevel); - PHY_SetRF8256OFDMTxPower(dev, powerlevelOFDM24G); -#endif break; case RF_6052: @@ -3081,7 +2293,6 @@ PHY_ScanOperationBackup8192S( -#if(RTL8192S_DISABLE_FW_DM == 0) if(!Adapter->bDriverStopped) { @@ -3110,7 +2321,6 @@ PHY_ScanOperationBackup8192S( break; } } -#endif } #endif @@ -3121,65 +2331,6 @@ void PHY_InitialGain8192S(struct net_device* dev,u8 Operation ) //struct r8192_priv *priv = ieee80211_priv(dev); //u32 BitMask; //u8 initial_gain; - -#if 0 // For 8192s test disable - if(!dev->bDriverStopped) - { - switch(Operation) - { - case IG_Backup: - RT_TRACE(COMP_SCAN, DBG_LOUD, ("IG_Backup, backup the initial gain.\n")); - initial_gain = priv->DefaultInitialGain[0]; - BitMask = bMaskByte0; - if(DM_DigTable.Dig_Algorithm == DIG_ALGO_BY_FALSE_ALARM) - PHY_SetMacReg(dev, UFWP, bMaskByte1, 0x8); // FW DIG OFF - pMgntInfo->InitGain_Backup.XAAGCCore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XAAGCCore1, BitMask); - pMgntInfo->InitGain_Backup.XBAGCCore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XBAGCCore1, BitMask); - pMgntInfo->InitGain_Backup.XCAGCCore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XCAGCCore1, BitMask); - pMgntInfo->InitGain_Backup.XDAGCCore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XDAGCCore1, BitMask); - BitMask = bMaskByte2; - pMgntInfo->InitGain_Backup.CCA = (u8)rtl8192_QueryBBReg(dev, rCCK0_CCA, BitMask); - - RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan InitialGainBackup 0xc50 is %x\n",pMgntInfo->InitGain_Backup.XAAGCCore1)); - RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan InitialGainBackup 0xc58 is %x\n",pMgntInfo->InitGain_Backup.XBAGCCore1)); - RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan InitialGainBackup 0xc60 is %x\n",pMgntInfo->InitGain_Backup.XCAGCCore1)); - RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan InitialGainBackup 0xc68 is %x\n",pMgntInfo->InitGain_Backup.XDAGCCore1)); - RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan InitialGainBackup 0xa0a is %x\n",pMgntInfo->InitGain_Backup.CCA)); - - RT_TRACE(COMP_SCAN, DBG_LOUD, ("Write scan initial gain = 0x%x \n", initial_gain)); - write_nic_byte(dev, rOFDM0_XAAGCCore1, initial_gain); - write_nic_byte(dev, rOFDM0_XBAGCCore1, initial_gain); - write_nic_byte(dev, rOFDM0_XCAGCCore1, initial_gain); - write_nic_byte(dev, rOFDM0_XDAGCCore1, initial_gain); - break; - case IG_Restore: - RT_TRACE(COMP_SCAN, DBG_LOUD, ("IG_Restore, restore the initial gain.\n")); - BitMask = 0x7f; //Bit0~ Bit6 - if(DM_DigTable.Dig_Algorithm == DIG_ALGO_BY_FALSE_ALARM) - PHY_SetMacReg(dev, UFWP, bMaskByte1, 0x8); // FW DIG OFF - - rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, BitMask, (u32)pMgntInfo->InitGain_Backup.XAAGCCore1); - rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, BitMask, (u32)pMgntInfo->InitGain_Backup.XBAGCCore1); - rtl8192_setBBreg(dev, rOFDM0_XCAGCCore1, BitMask, (u32)pMgntInfo->InitGain_Backup.XCAGCCore1); - rtl8192_setBBreg(dev, rOFDM0_XDAGCCore1, BitMask, (u32)pMgntInfo->InitGain_Backup.XDAGCCore1); - BitMask = (BIT22|BIT23); - rtl8192_setBBreg(dev, rCCK0_CCA, BitMask, (u32)pMgntInfo->InitGain_Backup.CCA); - - RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan BBInitialGainRestore 0xc50 is %x\n",pMgntInfo->InitGain_Backup.XAAGCCore1)); - RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan BBInitialGainRestore 0xc58 is %x\n",pMgntInfo->InitGain_Backup.XBAGCCore1)); - RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan BBInitialGainRestore 0xc60 is %x\n",pMgntInfo->InitGain_Backup.XCAGCCore1)); - RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan BBInitialGainRestore 0xc68 is %x\n",pMgntInfo->InitGain_Backup.XDAGCCore1)); - RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan BBInitialGainRestore 0xa0a is %x\n",pMgntInfo->InitGain_Backup.CCA)); - - if(DM_DigTable.Dig_Algorithm == DIG_ALGO_BY_FALSE_ALARM) - PHY_SetMacReg(dev, UFWP, bMaskByte1, 0x1); // FW DIG ON - break; - default: - RT_TRACE(COMP_SCAN, DBG_LOUD, ("Unknown IG Operation. \n")); - break; - } - } -#endif } /*----------------------------------------------------------------------------- @@ -3276,12 +2427,6 @@ void PHY_SetBWModeCallback8192S(struct net_device *dev) //write_nic_dword(dev, rCCK0_TxFilter1, 0x1a1b0000); //write_nic_dword(dev, rCCK0_TxFilter2, 0x090e1317); //write_nic_dword(dev, rCCK0_DebugPort, 0x00000204); - #if 0 //LZM 090219 - rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskDWord, 0x1a1b0000); - rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, 0x090e1317); - rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskDWord, 0x00000204); - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00300000, 3); - #endif if (priv->card_8192_version >= VERSION_8192S_BCUT) write_nic_byte(dev, rFPGA0_AnalogParameter2, 0x58); @@ -3298,11 +2443,6 @@ void PHY_SetBWModeCallback8192S(struct net_device *dev) //write_nic_dword(dev, rCCK0_TxFilter1, 0x35360000); //write_nic_dword(dev, rCCK0_TxFilter2, 0x121c252e); //write_nic_dword(dev, rCCK0_DebugPort, 0x00000409); - #if 0 //LZM 090219 - rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskDWord, 0x35360000); - rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, 0x121c252e); - rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskDWord, 0x00000409); - #endif // Set Control channel to upper or lower. These settings are required only for 40MHz rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1)); @@ -3421,23 +2561,9 @@ void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth, HT_EX else priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_DONT_CARE; -#if 0 - if(!priv->bDriverStopped) - { -#ifdef USE_WORKITEM - PlatformScheduleWorkItem(&(priv->SetBWModeWorkItem));//SetBWModeCallback8192SUsbWorkItem -#else - PlatformSetTimer(dev, &(priv->SetBWModeTimer), 0);//PHY_SetBWModeCallback8192S -#endif - } -#endif if((priv->up) )// && !(RT_CANNOT_IO(Adapter) && Adapter->bInSetPower) ) { -#ifdef RTL8192SE - PHY_SetBWModeCallback8192S(dev); -#elif defined(RTL8192SU) SetBWModeCallback8192SUsbWorkItem(dev); -#endif } else { @@ -3552,11 +2678,7 @@ u8 rtl8192_phy_SwChnl(struct net_device* dev, u8 channel) if((priv->up))// && !(RT_CANNOT_IO(Adapter) && Adapter->bInSetPower)) { -#ifdef RTL8192SE - PHY_SwChnlCallback8192S(dev); -#elif defined(RTL8192SU) SwChnlCallback8192SUsbWorkItem(dev); -#endif #ifdef TO_DO_LIST if(bResult) { @@ -3691,13 +2813,11 @@ phy_SwChnlStepByStep( //RT_ASSERT(IsLegalChannel(dev, channel), ("illegal channel: %d\n", channel)); RT_TRACE(COMP_CH, "===========>%s(), channel:%d, stage:%d, step:%d\n", __FUNCTION__, channel, *stage, *step); //RT_ASSERT((pHalData != NULL), ("pHalData should not be NULL\n")); -#ifdef ENABLE_DOT11D if (!IsLegalChannel(priv->ieee80211, channel)) { RT_TRACE(COMP_ERR, "=============>set to illegal channel:%d\n", channel); return true; //return true to tell upper caller function this channel setting is finished! Or it will in while loop. } -#endif //pChnlAccessSetting = &Adapter->MgntInfo.Info8185.ChannelAccessSetting; //RT_ASSERT((pChnlAccessSetting != NULL), ("pChnlAccessSetting should not be NULL\n")); @@ -3809,13 +2929,9 @@ phy_SwChnlStepByStep( case CmdID_RF_WriteReg: // Only modify channel for the register now !!!!! for(eRFPath = 0; eRFPath <priv->NumTotalRFPath; eRFPath++) { -#if (defined RTL8192SE ||defined RTL8192SU ) // For new T65 RF 0222d register 0x18 bit 0-9 = channel number. rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, 0x1f, (CurrentCmd->Para2)); //printk("====>%x, %x, read_back:%x\n", CurrentCmd->Para2,CurrentCmd->Para1, rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, 0x1f)); -#else - rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, bRFRegOffsetMask, ((CurrentCmd->Para2)<<7)); -#endif } break; default: @@ -3881,16 +2997,6 @@ u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device* dev, u32 eRFPath) bool rtValue = TRUE; // NOt check RF Path now.! -#if 0 - if (priv->rf_type == RF_1T2R && eRFPath != RF90_PATH_A) - { - rtValue = FALSE; - } - if (priv->rf_type == RF_1T2R && eRFPath != RF90_PATH_A) - { - - } -#endif return rtValue; } /* PHY_CheckIsLegalRfPath8192S */ @@ -4283,7 +3389,6 @@ extern void PHY_IQCalibrateBcut(struct net_device* dev) // //-------------------------Move to other DIR later----------------------------*/ //#if (DEV_BUS_TYPE == USB_INTERFACE) -#ifdef RTL8192SU // use in phy only (in win it's timer) void SwChnlCallback8192SUsb(struct net_device *dev) @@ -4431,18 +3536,6 @@ void SetBWModeCallback8192SUsb(struct net_device *dev) case HT_CHANNEL_WIDTH_20: rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x0); rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x0); - #if 0 //LZM090219 - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00300000, 3); - - // Correct the tx power for CCK rate in 20M. Suggest by YN, 20071207 - //write_nic_dword(dev, rCCK0_TxFilter1, 0x1a1b0000); - //write_nic_dword(dev, rCCK0_TxFilter2, 0x090e1317); - //write_nic_dword(dev, rCCK0_DebugPort, 0x00000204); - rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskDWord, 0x1a1b0000); - rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, 0x090e1317); - rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskDWord, 0x00000204); - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00300000, 3); - #endif if (priv->card_8192_version >= VERSION_8192S_BCUT) rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0xff, 0x58); @@ -4579,33 +3672,12 @@ void SetBWModeCallback8192SUsbWorkItem(struct net_device *dev) rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x0); rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x0); - #if 0 //LZM 090219 - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, bADClkPhase, 1); - - // Correct the tx power for CCK rate in 20M. Suggest by YN, 20071207 - rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskDWord, 0x1a1b0000); - rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, 0x090e1317); - rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskDWord, 0x00000204); - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 1); - #endif - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0xff, 0x58); break; case HT_CHANNEL_WIDTH_20_40: rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x1); rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x1); - #if 0 //LZM 090219 - rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1)); - - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, bADClkPhase, 0); - - rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC); - // Correct the tx power for CCK rate in 40M. Suggest by YN, 20071207 - rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskDWord, 0x35360000); - rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, 0x121c252e); - rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskDWord, 0x00000409); - #endif // Set Control channel to upper or lower. These settings are required only for 40MHz rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1)); @@ -4660,7 +3732,6 @@ void SetBWModeCallback8192SUsbWorkItem(struct net_device *dev) } //--------------------------Move to oter DIR later-------------------------------*/ -#ifdef RTL8192SU void InitialGain8192S(struct net_device *dev, u8 Operation) { #ifdef TO_DO_LIST @@ -4668,7 +3739,6 @@ void InitialGain8192S(struct net_device *dev, u8 Operation) #endif } -#endif void InitialGain819xUsb(struct net_device *dev, u8 Operation) { @@ -4678,29 +3748,15 @@ void InitialGain819xUsb(struct net_device *dev, u8 Operation) if(priv->up) { - #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) queue_delayed_work(priv->priv_wq,&priv->initialgain_operate_wq,0); - #else - #if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - schedule_task(&priv->initialgain_operate_wq); - #else - queue_work(priv->priv_wq,&priv->initialgain_operate_wq); - #endif - #endif } } -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)) extern void InitialGainOperateWorkItemCallBack(struct work_struct *work) { struct delayed_work *dwork = container_of(work,struct delayed_work,work); struct r8192_priv *priv = container_of(dwork,struct r8192_priv,initialgain_operate_wq); struct net_device *dev = priv->ieee80211->dev; -#else -extern void InitialGainOperateWorkItemCallBack(struct net_device *dev) -{ - struct r8192_priv *priv = ieee80211_priv(dev); -#endif #define SCAN_RX_INITIAL_GAIN 0x17 #define POWER_DETECTION_TH 0x08 u32 BitMask; @@ -4768,7 +3824,6 @@ extern void InitialGainOperateWorkItemCallBack(struct net_device *dev) } } -#endif // #if (DEV_BUS_TYPE == USB_INTERFACE) //----------------------------------------------------------------------------- // Description: |