diff options
author | Russell King <rmk+kernel@arm.linux.org.uk> | 2009-09-22 19:54:53 (GMT) |
---|---|---|
committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2009-09-22 20:01:40 (GMT) |
commit | ae19ffbadc1b2100285a5b5b3d0a4e0a11390904 (patch) | |
tree | 3c2086ab67398a019089a47ca3f362a4bc6db74f /drivers/staging/rtl8192su/r819xU_phy.c | |
parent | 34e84f39a27d059a3e6ec6e8b94aafa702e6f220 (diff) | |
parent | 9173a8ef24a6b1b8031507b35b8ffe5f85a87692 (diff) | |
download | linux-fsl-qoriq-ae19ffbadc1b2100285a5b5b3d0a4e0a11390904.tar.xz |
Merge branch 'master' into for-linus
Diffstat (limited to 'drivers/staging/rtl8192su/r819xU_phy.c')
-rw-r--r-- | drivers/staging/rtl8192su/r819xU_phy.c | 1826 |
1 files changed, 0 insertions, 1826 deletions
diff --git a/drivers/staging/rtl8192su/r819xU_phy.c b/drivers/staging/rtl8192su/r819xU_phy.c deleted file mode 100644 index 00497d3..0000000 --- a/drivers/staging/rtl8192su/r819xU_phy.c +++ /dev/null @@ -1,1826 +0,0 @@ -#include "r8192U.h" -#include "r8192U_hw.h" -#include "r819xU_phy.h" -#include "r819xU_phyreg.h" -#include "r8190_rtl8256.h" -#include "r8192U_dm.h" -#include "r819xU_firmware_img.h" - -#ifdef ENABLE_DOT11D -#include "dot11d.h" -#endif -static u32 RF_CHANNEL_TABLE_ZEBRA[] = { - 0, - 0x085c, //2412 1 - 0x08dc, //2417 2 - 0x095c, //2422 3 - 0x09dc, //2427 4 - 0x0a5c, //2432 5 - 0x0adc, //2437 6 - 0x0b5c, //2442 7 - 0x0bdc, //2447 8 - 0x0c5c, //2452 9 - 0x0cdc, //2457 10 - 0x0d5c, //2462 11 - 0x0ddc, //2467 12 - 0x0e5c, //2472 13 - 0x0f72, //2484 -}; - - -#define rtl819XPHY_REG_1T2RArray Rtl8192UsbPHY_REG_1T2RArray -#define rtl819XMACPHY_Array_PG Rtl8192UsbMACPHY_Array_PG -#define rtl819XMACPHY_Array Rtl8192UsbMACPHY_Array -#define rtl819XRadioA_Array Rtl8192UsbRadioA_Array -#define rtl819XRadioB_Array Rtl8192UsbRadioB_Array -#define rtl819XRadioC_Array Rtl8192UsbRadioC_Array -#define rtl819XRadioD_Array Rtl8192UsbRadioD_Array -#define rtl819XAGCTAB_Array Rtl8192UsbAGCTAB_Array - -/****************************************************************************** - *function: This function read BB parameters from Header file we gen, - * and do register read/write - * input: u32 dwBitMask //taget bit pos in the addr to be modified - * output: none - * return: u32 return the shift bit bit position of the mask - * ****************************************************************************/ -u32 rtl8192_CalculateBitShift(u32 dwBitMask) -{ - u32 i; - for (i=0; i<=31; i++) - { - if (((dwBitMask>>i)&0x1) == 1) - break; - } - return i; -} -/****************************************************************************** - *function: This function check different RF type to execute legal judgement. If RF Path is illegal, we will return false. - * input: none - * output: none - * return: 0(illegal, false), 1(legal,true) - * ***************************************************************************/ -u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device* dev, u32 eRFPath) -{ - u8 ret = 1; - struct r8192_priv *priv = ieee80211_priv(dev); - if (priv->rf_type == RF_2T4R) - ret = 0; - else if (priv->rf_type == RF_1T2R) - { - if (eRFPath == RF90_PATH_A || eRFPath == RF90_PATH_B) - ret = 1; - else if (eRFPath == RF90_PATH_C || eRFPath == RF90_PATH_D) - ret = 0; - } - return ret; -} -/****************************************************************************** - *function: This function set specific bits to BB register - * input: net_device dev - * u32 dwRegAddr //target addr to be modified - * u32 dwBitMask //taget bit pos in the addr to be modified - * u32 dwData //value to be write - * output: none - * return: none - * notice: - * ****************************************************************************/ -void rtl8192_setBBreg(struct net_device* dev, u32 dwRegAddr, u32 dwBitMask, u32 dwData) -{ - - u32 OriginalValue, BitShift, NewValue; - - if(dwBitMask!= bMaskDWord) - {//if not "double word" write - OriginalValue = read_nic_dword(dev, dwRegAddr); - BitShift = rtl8192_CalculateBitShift(dwBitMask); - NewValue = (((OriginalValue) & (~dwBitMask)) | (dwData << BitShift)); - write_nic_dword(dev, dwRegAddr, NewValue); - }else - write_nic_dword(dev, dwRegAddr, dwData); - return; -} -/****************************************************************************** - *function: This function reads specific bits from BB register - * input: net_device dev - * u32 dwRegAddr //target addr to be readback - * u32 dwBitMask //taget bit pos in the addr to be readback - * output: none - * return: u32 Data //the readback register value - * notice: - * ****************************************************************************/ -u32 rtl8192_QueryBBReg(struct net_device* dev, u32 dwRegAddr, u32 dwBitMask) -{ - u32 Ret = 0, OriginalValue, BitShift; - - OriginalValue = read_nic_dword(dev, dwRegAddr); - BitShift = rtl8192_CalculateBitShift(dwBitMask); - Ret =(OriginalValue & dwBitMask) >> BitShift; - - return (Ret); -} -static u32 phy_FwRFSerialRead( struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset ); - -static void phy_FwRFSerialWrite( struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data); - -/****************************************************************************** - *function: This function read register from RF chip - * input: net_device dev - * RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D - * u32 Offset //target address to be read - * output: none - * return: u32 readback value - * notice: There are three types of serial operations:(1) Software serial write.(2)Hardware LSSI-Low Speed Serial Interface.(3)Hardware HSSI-High speed serial write. Driver here need to implement (1) and (2)---need more spec for this information. - * ****************************************************************************/ -u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - u32 ret = 0; - u32 NewOffset = 0; - BB_REGISTER_DEFINITION_T* pPhyReg = &priv->PHYRegDef[eRFPath]; - rtl8192_setBBreg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData, 0); - //make sure RF register offset is correct - Offset &= 0x3f; - - //switch page for 8256 RF IC - if (priv->rf_chip == RF_8256) - { - if (Offset >= 31) - { - priv->RfReg0Value[eRFPath] |= 0x140; - //Switch to Reg_Mode2 for Reg 31-45 - rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16) ); - //modify offset - NewOffset = Offset -30; - } - else if (Offset >= 16) - { - priv->RfReg0Value[eRFPath] |= 0x100; - priv->RfReg0Value[eRFPath] &= (~0x40); - //Switch to Reg_Mode 1 for Reg16-30 - rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16) ); - - NewOffset = Offset - 15; - } - else - NewOffset = Offset; - } - else - { - RT_TRACE((COMP_PHY|COMP_ERR), "check RF type here, need to be 8256\n"); - NewOffset = Offset; - } - //put desired read addr to LSSI control Register - rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadAddress, NewOffset); - //Issue a posedge trigger - // - rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x0); - rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x1); - - - // TODO: we should not delay such a long time. Ask help from SD3 - msleep(1); - - ret = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData); - - - // Switch back to Reg_Mode0; - if(priv->rf_chip == RF_8256) - { - priv->RfReg0Value[eRFPath] &= 0xebf; - - rtl8192_setBBreg( - dev, - pPhyReg->rf3wireOffset, - bMaskDWord, - (priv->RfReg0Value[eRFPath] << 16)); - } - - return ret; - -} - -/****************************************************************************** - *function: This function write data to RF register - * input: net_device dev - * RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D - * u32 Offset //target address to be written - * u32 Data //The new register data to be written - * output: none - * return: none - * notice: For RF8256 only. - =========================================================== - *Reg Mode RegCTL[1] RegCTL[0] Note - * (Reg00[12]) (Reg00[10]) - *=========================================================== - *Reg_Mode0 0 x Reg 0 ~15(0x0 ~ 0xf) - *------------------------------------------------------------------ - *Reg_Mode1 1 0 Reg 16 ~30(0x1 ~ 0xf) - *------------------------------------------------------------------ - * Reg_Mode2 1 1 Reg 31 ~ 45(0x1 ~ 0xf) - *------------------------------------------------------------------ - * ****************************************************************************/ -void rtl8192_phy_RFSerialWrite(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - u32 DataAndAddr = 0, NewOffset = 0; - BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath]; - - Offset &= 0x3f; - //spin_lock_irqsave(&priv->rf_lock, flags); -// down(&priv->rf_sem); - if (priv->rf_chip == RF_8256) - { - - if (Offset >= 31) - { - priv->RfReg0Value[eRFPath] |= 0x140; - rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath] << 16)); - NewOffset = Offset - 30; - } - else if (Offset >= 16) - { - priv->RfReg0Value[eRFPath] |= 0x100; - priv->RfReg0Value[eRFPath] &= (~0x40); - rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, (priv->RfReg0Value[eRFPath]<<16)); - NewOffset = Offset - 15; - } - else - NewOffset = Offset; - } - else - { - RT_TRACE((COMP_PHY|COMP_ERR), "check RF type here, need to be 8256\n"); - NewOffset = Offset; - } - - // Put write addr in [5:0] and write data in [31:16] - DataAndAddr = (Data<<16) | (NewOffset&0x3f); - - // Write Operation - rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, DataAndAddr); - - - if(Offset==0x0) - priv->RfReg0Value[eRFPath] = Data; - - // Switch back to Reg_Mode0; - if(priv->rf_chip == RF_8256) - { - if(Offset != 0) - { - priv->RfReg0Value[eRFPath] &= 0xebf; - rtl8192_setBBreg( - dev, - pPhyReg->rf3wireOffset, - bMaskDWord, - (priv->RfReg0Value[eRFPath] << 16)); - } - } - //spin_unlock_irqrestore(&priv->rf_lock, flags); -// up(&priv->rf_sem); - return; -} - -/****************************************************************************** - *function: This function set specific bits to RF register - * input: net_device dev - * RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D - * u32 RegAddr //target addr to be modified - * u32 BitMask //taget bit pos in the addr to be modified - * u32 Data //value to be write - * output: none - * return: none - * notice: - * ****************************************************************************/ -void rtl8192_phy_SetRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask, u32 Data) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - u32 Original_Value, BitShift, New_Value; -// u8 time = 0; - - if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath)) - return; - - if (priv->Rf_Mode == RF_OP_By_FW) - { - if (BitMask != bMask12Bits) // RF data is 12 bits only - { - Original_Value = phy_FwRFSerialRead(dev, eRFPath, RegAddr); - BitShift = rtl8192_CalculateBitShift(BitMask); - New_Value = ((Original_Value) & (~BitMask)) | (Data<< BitShift); - - phy_FwRFSerialWrite(dev, eRFPath, RegAddr, New_Value); - }else - phy_FwRFSerialWrite(dev, eRFPath, RegAddr, Data); - - udelay(200); - - } - else - { - if (BitMask != bMask12Bits) // RF data is 12 bits only - { - Original_Value = rtl8192_phy_RFSerialRead(dev, eRFPath, RegAddr); - BitShift = rtl8192_CalculateBitShift(BitMask); - New_Value = (((Original_Value) & (~BitMask)) | (Data<< BitShift)); - - rtl8192_phy_RFSerialWrite(dev, eRFPath, RegAddr, New_Value); - }else - rtl8192_phy_RFSerialWrite(dev, eRFPath, RegAddr, Data); - } - return; -} - -/****************************************************************************** - *function: This function reads specific bits from RF register - * input: net_device dev - * u32 RegAddr //target addr to be readback - * u32 BitMask //taget bit pos in the addr to be readback - * output: none - * return: u32 Data //the readback register value - * notice: - * ****************************************************************************/ -u32 rtl8192_phy_QueryRFReg(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask) -{ - u32 Original_Value, Readback_Value, BitShift; - struct r8192_priv *priv = ieee80211_priv(dev); - - - if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath)) - return 0; - if (priv->Rf_Mode == RF_OP_By_FW) - { - Original_Value = phy_FwRFSerialRead(dev, eRFPath, RegAddr); - BitShift = rtl8192_CalculateBitShift(BitMask); - Readback_Value = (Original_Value & BitMask) >> BitShift; - udelay(200); - return (Readback_Value); - } - else - { - Original_Value = rtl8192_phy_RFSerialRead(dev, eRFPath, RegAddr); - BitShift = rtl8192_CalculateBitShift(BitMask); - Readback_Value = (Original_Value & BitMask) >> BitShift; - return (Readback_Value); - } -} -/****************************************************************************** - *function: We support firmware to execute RF-R/W. - * input: dev - * output: none - * return: none - * notice: - * ***************************************************************************/ -static u32 -phy_FwRFSerialRead( - struct net_device* dev, - RF90_RADIO_PATH_E eRFPath, - u32 Offset ) -{ - u32 retValue = 0; - u32 Data = 0; - u8 time = 0; - //DbgPrint("FW RF CTRL\n\r"); - /* 2007/11/02 MH Firmware RF Write control. By Francis' suggestion, we can - not execute the scheme in the initial step. Otherwise, RF-R/W will waste - much time. This is only for site survey. */ - // 1. Read operation need not insert data. bit 0-11 - //Data &= bMask12Bits; - // 2. Write RF register address. Bit 12-19 - Data |= ((Offset&0xFF)<<12); - // 3. Write RF path. bit 20-21 - Data |= ((eRFPath&0x3)<<20); - // 4. Set RF read indicator. bit 22=0 - //Data |= 0x00000; - // 5. Trigger Fw to operate the command. bit 31 - Data |= 0x80000000; - // 6. We can not execute read operation if bit 31 is 1. - while (read_nic_dword(dev, QPNR)&0x80000000) - { - // If FW can not finish RF-R/W for more than ?? times. We must reset FW. - if (time++ < 100) - { - //DbgPrint("FW not finish RF-R Time=%d\n\r", time); - udelay(10); - } - else - break; - } - // 7. Execute read operation. - write_nic_dword(dev, QPNR, Data); - // 8. Check if firmawre send back RF content. - while (read_nic_dword(dev, QPNR)&0x80000000) - { - // If FW can not finish RF-R/W for more than ?? times. We must reset FW. - if (time++ < 100) - { - //DbgPrint("FW not finish RF-W Time=%d\n\r", time); - udelay(10); - } - else - return (0); - } - retValue = read_nic_dword(dev, RF_DATA); - - return (retValue); - -} /* phy_FwRFSerialRead */ - -/****************************************************************************** - *function: We support firmware to execute RF-R/W. - * input: dev - * output: none - * return: none - * notice: - * ***************************************************************************/ -static void -phy_FwRFSerialWrite( - struct net_device* dev, - RF90_RADIO_PATH_E eRFPath, - u32 Offset, - u32 Data ) -{ - u8 time = 0; - - //DbgPrint("N FW RF CTRL RF-%d OF%02x DATA=%03x\n\r", eRFPath, Offset, Data); - /* 2007/11/02 MH Firmware RF Write control. By Francis' suggestion, we can - not execute the scheme in the initial step. Otherwise, RF-R/W will waste - much time. This is only for site survey. */ - - // 1. Set driver write bit and 12 bit data. bit 0-11 - //Data &= bMask12Bits; // Done by uper layer. - // 2. Write RF register address. bit 12-19 - Data |= ((Offset&0xFF)<<12); - // 3. Write RF path. bit 20-21 - Data |= ((eRFPath&0x3)<<20); - // 4. Set RF write indicator. bit 22=1 - Data |= 0x400000; - // 5. Trigger Fw to operate the command. bit 31=1 - Data |= 0x80000000; - - // 6. Write operation. We can not write if bit 31 is 1. - while (read_nic_dword(dev, QPNR)&0x80000000) - { - // If FW can not finish RF-R/W for more than ?? times. We must reset FW. - if (time++ < 100) - { - //DbgPrint("FW not finish RF-W Time=%d\n\r", time); - udelay(10); - } - else - break; - } - // 7. No matter check bit. We always force the write. Because FW will - // not accept the command. - write_nic_dword(dev, QPNR, Data); - /* 2007/11/02 MH Acoording to test, we must delay 20us to wait firmware - to finish RF write operation. */ - /* 2008/01/17 MH We support delay in firmware side now. */ - //delay_us(20); - -} /* phy_FwRFSerialWrite */ - - -/****************************************************************************** - *function: This function read BB parameters from Header file we gen, - * and do register read/write - * input: dev - * output: none - * return: none - * notice: BB parameters may change all the time, so please make - * sure it has been synced with the newest. - * ***************************************************************************/ -void rtl8192_phy_configmac(struct net_device* dev) -{ - u32 dwArrayLen = 0, i; - u32* pdwArray = NULL; - struct r8192_priv *priv = ieee80211_priv(dev); - - if(priv->btxpowerdata_readfromEEPORM) - { - RT_TRACE(COMP_PHY, "Rtl819XMACPHY_Array_PG\n"); - dwArrayLen = MACPHY_Array_PGLength; - pdwArray = rtl819XMACPHY_Array_PG; - - } - else - { - RT_TRACE(COMP_PHY, "Rtl819XMACPHY_Array\n"); - dwArrayLen = MACPHY_ArrayLength; - pdwArray = rtl819XMACPHY_Array; - } - for(i = 0; i<dwArrayLen; i=i+3){ - if(pdwArray[i] == 0x318) - { - pdwArray[i+2] = 0x00000800; - //DbgPrint("ptrArray[i], ptrArray[i+1], ptrArray[i+2] = %x, %x, %x\n", - // ptrArray[i], ptrArray[i+1], ptrArray[i+2]); - } - - RT_TRACE(COMP_DBG, "The Rtl8190MACPHY_Array[0] is %x Rtl8190MACPHY_Array[1] is %x Rtl8190MACPHY_Array[2] is %x\n", - pdwArray[i], pdwArray[i+1], pdwArray[i+2]); - rtl8192_setBBreg(dev, pdwArray[i], pdwArray[i+1], pdwArray[i+2]); - } - return; - -} - -/****************************************************************************** - *function: This function do dirty work - * input: dev - * output: none - * return: none - * notice: BB parameters may change all the time, so please make - * sure it has been synced with the newest. - * ***************************************************************************/ - -void rtl8192_phyConfigBB(struct net_device* dev, u8 ConfigType) -{ - u32 i; - -#ifdef TO_DO_LIST - u32 *rtl8192PhyRegArrayTable = NULL, *rtl8192AgcTabArrayTable = NULL; - if(Adapter->bInHctTest) - { - PHY_REGArrayLen = PHY_REGArrayLengthDTM; - AGCTAB_ArrayLen = AGCTAB_ArrayLengthDTM; - Rtl8190PHY_REGArray_Table = Rtl819XPHY_REGArrayDTM; - Rtl8190AGCTAB_Array_Table = Rtl819XAGCTAB_ArrayDTM; - } -#endif - if (ConfigType == BaseBand_Config_PHY_REG) - { - for (i=0; i<PHY_REG_1T2RArrayLength; i+=2) - { - rtl8192_setBBreg(dev, rtl819XPHY_REG_1T2RArray[i], bMaskDWord, rtl819XPHY_REG_1T2RArray[i+1]); - RT_TRACE(COMP_DBG, "i: %x, The Rtl819xUsbPHY_REGArray[0] is %x Rtl819xUsbPHY_REGArray[1] is %x \n",i, rtl819XPHY_REG_1T2RArray[i], rtl819XPHY_REG_1T2RArray[i+1]); - } - } - else if (ConfigType == BaseBand_Config_AGC_TAB) - { - for (i=0; i<AGCTAB_ArrayLength; i+=2) - { - rtl8192_setBBreg(dev, rtl819XAGCTAB_Array[i], bMaskDWord, rtl819XAGCTAB_Array[i+1]); - RT_TRACE(COMP_DBG, "i:%x, The rtl819XAGCTAB_Array[0] is %x rtl819XAGCTAB_Array[1] is %x \n",i, rtl819XAGCTAB_Array[i], rtl819XAGCTAB_Array[i+1]); - } - } - return; - - -} -/****************************************************************************** - *function: This function initialize Register definition offset for Radio Path - * A/B/C/D - * input: net_device dev - * output: none - * return: none - * notice: Initialization value here is constant and it should never be changed - * ***************************************************************************/ -void rtl8192_InitBBRFRegDef(struct net_device* dev) -{ - struct r8192_priv *priv = ieee80211_priv(dev); -// RF Interface Sowrtware Control - priv->PHYRegDef[RF90_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 LSBs if read 32-bit from 0x870 - priv->PHYRegDef[RF90_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872) - priv->PHYRegDef[RF90_PATH_C].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 LSBs if read 32-bit from 0x874 - priv->PHYRegDef[RF90_PATH_D].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 MSBs if read 32-bit from 0x874 (16-bit for 0x876) - - // RF Interface Readback Value - priv->PHYRegDef[RF90_PATH_A].rfintfi = rFPGA0_XAB_RFInterfaceRB; // 16 LSBs if read 32-bit from 0x8E0 - priv->PHYRegDef[RF90_PATH_B].rfintfi = rFPGA0_XAB_RFInterfaceRB;// 16 MSBs if read 32-bit from 0x8E0 (16-bit for 0x8E2) - priv->PHYRegDef[RF90_PATH_C].rfintfi = rFPGA0_XCD_RFInterfaceRB;// 16 LSBs if read 32-bit from 0x8E4 - priv->PHYRegDef[RF90_PATH_D].rfintfi = rFPGA0_XCD_RFInterfaceRB;// 16 MSBs if read 32-bit from 0x8E4 (16-bit for 0x8E6) - - // RF Interface Output (and Enable) - priv->PHYRegDef[RF90_PATH_A].rfintfo = rFPGA0_XA_RFInterfaceOE; // 16 LSBs if read 32-bit from 0x860 - priv->PHYRegDef[RF90_PATH_B].rfintfo = rFPGA0_XB_RFInterfaceOE; // 16 LSBs if read 32-bit from 0x864 - priv->PHYRegDef[RF90_PATH_C].rfintfo = rFPGA0_XC_RFInterfaceOE;// 16 LSBs if read 32-bit from 0x868 - priv->PHYRegDef[RF90_PATH_D].rfintfo = rFPGA0_XD_RFInterfaceOE;// 16 LSBs if read 32-bit from 0x86C - - // RF Interface (Output and) Enable - priv->PHYRegDef[RF90_PATH_A].rfintfe = rFPGA0_XA_RFInterfaceOE; // 16 MSBs if read 32-bit from 0x860 (16-bit for 0x862) - priv->PHYRegDef[RF90_PATH_B].rfintfe = rFPGA0_XB_RFInterfaceOE; // 16 MSBs if read 32-bit from 0x864 (16-bit for 0x866) - priv->PHYRegDef[RF90_PATH_C].rfintfe = rFPGA0_XC_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86A (16-bit for 0x86A) - priv->PHYRegDef[RF90_PATH_D].rfintfe = rFPGA0_XD_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86C (16-bit for 0x86E) - - //Addr of LSSI. Wirte RF register by driver - priv->PHYRegDef[RF90_PATH_A].rf3wireOffset = rFPGA0_XA_LSSIParameter; //LSSI Parameter - priv->PHYRegDef[RF90_PATH_B].rf3wireOffset = rFPGA0_XB_LSSIParameter; - priv->PHYRegDef[RF90_PATH_C].rf3wireOffset = rFPGA0_XC_LSSIParameter; - priv->PHYRegDef[RF90_PATH_D].rf3wireOffset = rFPGA0_XD_LSSIParameter; - - // RF parameter - priv->PHYRegDef[RF90_PATH_A].rfLSSI_Select = rFPGA0_XAB_RFParameter; //BB Band Select - priv->PHYRegDef[RF90_PATH_B].rfLSSI_Select = rFPGA0_XAB_RFParameter; - priv->PHYRegDef[RF90_PATH_C].rfLSSI_Select = rFPGA0_XCD_RFParameter; - priv->PHYRegDef[RF90_PATH_D].rfLSSI_Select = rFPGA0_XCD_RFParameter; - - // Tx AGC Gain Stage (same for all path. Should we remove this?) - priv->PHYRegDef[RF90_PATH_A].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage - priv->PHYRegDef[RF90_PATH_B].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage - priv->PHYRegDef[RF90_PATH_C].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage - priv->PHYRegDef[RF90_PATH_D].rfTxGainStage = rFPGA0_TxGainStage; //Tx gain stage - - // Tranceiver A~D HSSI Parameter-1 - priv->PHYRegDef[RF90_PATH_A].rfHSSIPara1 = rFPGA0_XA_HSSIParameter1; //wire control parameter1 - priv->PHYRegDef[RF90_PATH_B].rfHSSIPara1 = rFPGA0_XB_HSSIParameter1; //wire control parameter1 - priv->PHYRegDef[RF90_PATH_C].rfHSSIPara1 = rFPGA0_XC_HSSIParameter1; //wire control parameter1 - priv->PHYRegDef[RF90_PATH_D].rfHSSIPara1 = rFPGA0_XD_HSSIParameter1; //wire control parameter1 - - // Tranceiver A~D HSSI Parameter-2 - priv->PHYRegDef[RF90_PATH_A].rfHSSIPara2 = rFPGA0_XA_HSSIParameter2; //wire control parameter2 - priv->PHYRegDef[RF90_PATH_B].rfHSSIPara2 = rFPGA0_XB_HSSIParameter2; //wire control parameter2 - priv->PHYRegDef[RF90_PATH_C].rfHSSIPara2 = rFPGA0_XC_HSSIParameter2; //wire control parameter2 - priv->PHYRegDef[RF90_PATH_D].rfHSSIPara2 = rFPGA0_XD_HSSIParameter2; //wire control parameter1 - - // RF switch Control - priv->PHYRegDef[RF90_PATH_A].rfSwitchControl = rFPGA0_XAB_SwitchControl; //TR/Ant switch control - priv->PHYRegDef[RF90_PATH_B].rfSwitchControl = rFPGA0_XAB_SwitchControl; - priv->PHYRegDef[RF90_PATH_C].rfSwitchControl = rFPGA0_XCD_SwitchControl; - priv->PHYRegDef[RF90_PATH_D].rfSwitchControl = rFPGA0_XCD_SwitchControl; - - // AGC control 1 - priv->PHYRegDef[RF90_PATH_A].rfAGCControl1 = rOFDM0_XAAGCCore1; - priv->PHYRegDef[RF90_PATH_B].rfAGCControl1 = rOFDM0_XBAGCCore1; - priv->PHYRegDef[RF90_PATH_C].rfAGCControl1 = rOFDM0_XCAGCCore1; - priv->PHYRegDef[RF90_PATH_D].rfAGCControl1 = rOFDM0_XDAGCCore1; - - // AGC control 2 - priv->PHYRegDef[RF90_PATH_A].rfAGCControl2 = rOFDM0_XAAGCCore2; - priv->PHYRegDef[RF90_PATH_B].rfAGCControl2 = rOFDM0_XBAGCCore2; - priv->PHYRegDef[RF90_PATH_C].rfAGCControl2 = rOFDM0_XCAGCCore2; - priv->PHYRegDef[RF90_PATH_D].rfAGCControl2 = rOFDM0_XDAGCCore2; - - // RX AFE control 1 - priv->PHYRegDef[RF90_PATH_A].rfRxIQImbalance = rOFDM0_XARxIQImbalance; - priv->PHYRegDef[RF90_PATH_B].rfRxIQImbalance = rOFDM0_XBRxIQImbalance; - priv->PHYRegDef[RF90_PATH_C].rfRxIQImbalance = rOFDM0_XCRxIQImbalance; - priv->PHYRegDef[RF90_PATH_D].rfRxIQImbalance = rOFDM0_XDRxIQImbalance; - - // RX AFE control 1 - priv->PHYRegDef[RF90_PATH_A].rfRxAFE = rOFDM0_XARxAFE; - priv->PHYRegDef[RF90_PATH_B].rfRxAFE = rOFDM0_XBRxAFE; - priv->PHYRegDef[RF90_PATH_C].rfRxAFE = rOFDM0_XCRxAFE; - priv->PHYRegDef[RF90_PATH_D].rfRxAFE = rOFDM0_XDRxAFE; - - // Tx AFE control 1 - priv->PHYRegDef[RF90_PATH_A].rfTxIQImbalance = rOFDM0_XATxIQImbalance; - priv->PHYRegDef[RF90_PATH_B].rfTxIQImbalance = rOFDM0_XBTxIQImbalance; - priv->PHYRegDef[RF90_PATH_C].rfTxIQImbalance = rOFDM0_XCTxIQImbalance; - priv->PHYRegDef[RF90_PATH_D].rfTxIQImbalance = rOFDM0_XDTxIQImbalance; - - // Tx AFE control 2 - priv->PHYRegDef[RF90_PATH_A].rfTxAFE = rOFDM0_XATxAFE; - priv->PHYRegDef[RF90_PATH_B].rfTxAFE = rOFDM0_XBTxAFE; - priv->PHYRegDef[RF90_PATH_C].rfTxAFE = rOFDM0_XCTxAFE; - priv->PHYRegDef[RF90_PATH_D].rfTxAFE = rOFDM0_XDTxAFE; - - // Tranceiver LSSI Readback - priv->PHYRegDef[RF90_PATH_A].rfLSSIReadBack = rFPGA0_XA_LSSIReadBack; - priv->PHYRegDef[RF90_PATH_B].rfLSSIReadBack = rFPGA0_XB_LSSIReadBack; - priv->PHYRegDef[RF90_PATH_C].rfLSSIReadBack = rFPGA0_XC_LSSIReadBack; - priv->PHYRegDef[RF90_PATH_D].rfLSSIReadBack = rFPGA0_XD_LSSIReadBack; - -} -/****************************************************************************** - *function: This function is to write register and then readback to make sure whether BB and RF is OK - * input: net_device dev - * HW90_BLOCK_E CheckBlock - * RF90_RADIO_PATH_E eRFPath //only used when checkblock is HW90_BLOCK_RF - * output: none - * return: return whether BB and RF is ok(0:OK; 1:Fail) - * notice: This function may be removed in the ASIC - * ***************************************************************************/ -u8 rtl8192_phy_checkBBAndRF(struct net_device* dev, HW90_BLOCK_E CheckBlock, RF90_RADIO_PATH_E eRFPath) -{ -// struct r8192_priv *priv = ieee80211_priv(dev); -// BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath]; - u8 ret = 0; - u32 i, CheckTimes = 4, dwRegRead = 0; - u32 WriteAddr[4]; - u32 WriteData[] = {0xfffff027, 0xaa55a02f, 0x00000027, 0x55aa502f}; - // Initialize register address offset to be checked - WriteAddr[HW90_BLOCK_MAC] = 0x100; - WriteAddr[HW90_BLOCK_PHY0] = 0x900; - WriteAddr[HW90_BLOCK_PHY1] = 0x800; - WriteAddr[HW90_BLOCK_RF] = 0x3; - RT_TRACE(COMP_PHY, "=======>%s(), CheckBlock:%d\n", __FUNCTION__, CheckBlock); - for(i=0 ; i < CheckTimes ; i++) - { - - // - // Write Data to register and readback - // - switch(CheckBlock) - { - case HW90_BLOCK_MAC: - RT_TRACE(COMP_ERR, "PHY_CheckBBRFOK(): Never Write 0x100 here!"); - break; - - case HW90_BLOCK_PHY0: - case HW90_BLOCK_PHY1: - write_nic_dword(dev, WriteAddr[CheckBlock], WriteData[i]); - dwRegRead = read_nic_dword(dev, WriteAddr[CheckBlock]); - break; - - case HW90_BLOCK_RF: - WriteData[i] &= 0xfff; - rtl8192_phy_SetRFReg(dev, eRFPath, WriteAddr[HW90_BLOCK_RF], bMask12Bits, WriteData[i]); - // TODO: we should not delay for such a long time. Ask SD3 - msleep(1); - dwRegRead = rtl8192_phy_QueryRFReg(dev, eRFPath, WriteAddr[HW90_BLOCK_RF], bMask12Bits); - msleep(1); - break; - - default: - ret = 1; - break; - } - - - // - // Check whether readback data is correct - // - if(dwRegRead != WriteData[i]) - { - RT_TRACE((COMP_PHY|COMP_ERR), "====>error=====dwRegRead: %x, WriteData: %x \n", dwRegRead, WriteData[i]); - ret = 1; - break; - } - } - - return ret; -} - - -/****************************************************************************** - *function: This function initialize BB&RF - * input: net_device dev - * output: none - * return: none - * notice: Initialization value may change all the time, so please make - * sure it has been synced with the newest. - * ***************************************************************************/ -void rtl8192_BB_Config_ParaFile(struct net_device* dev) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - u8 bRegValue = 0, eCheckItem = 0, rtStatus = 0; - u32 dwRegValue = 0; - /************************************** - //<1>Initialize BaseBand - **************************************/ - - /*--set BB Global Reset--*/ - bRegValue = read_nic_byte(dev, BB_GLOBAL_RESET); - write_nic_byte(dev, BB_GLOBAL_RESET,(bRegValue|BB_GLOBAL_RESET_BIT)); - mdelay(50); - /*---set BB reset Active---*/ - dwRegValue = read_nic_dword(dev, CPU_GEN); - write_nic_dword(dev, CPU_GEN, (dwRegValue&(~CPU_GEN_BB_RST))); - - /*----Ckeck FPGAPHY0 and PHY1 board is OK----*/ - // TODO: this function should be removed on ASIC , Emily 2007.2.2 - for(eCheckItem=(HW90_BLOCK_E)HW90_BLOCK_PHY0; eCheckItem<=HW90_BLOCK_PHY1; eCheckItem++) - { - rtStatus = rtl8192_phy_checkBBAndRF(dev, (HW90_BLOCK_E)eCheckItem, (RF90_RADIO_PATH_E)0); //don't care RF path - if(rtStatus != 0) - { - RT_TRACE((COMP_ERR | COMP_PHY), "PHY_RF8256_Config():Check PHY%d Fail!!\n", eCheckItem-1); - return ; - } - } - /*---- Set CCK and OFDM Block "OFF"----*/ - rtl8192_setBBreg(dev, rFPGA0_RFMOD, bCCKEn|bOFDMEn, 0x0); - /*----BB Register Initilazation----*/ - //==m==>Set PHY REG From Header<==m== - rtl8192_phyConfigBB(dev, BaseBand_Config_PHY_REG); - - /*----Set BB reset de-Active----*/ - dwRegValue = read_nic_dword(dev, CPU_GEN); - write_nic_dword(dev, CPU_GEN, (dwRegValue|CPU_GEN_BB_RST)); - - /*----BB AGC table Initialization----*/ - //==m==>Set PHY REG From Header<==m== - rtl8192_phyConfigBB(dev, BaseBand_Config_AGC_TAB); - - /*----Enable XSTAL ----*/ - write_nic_byte_E(dev, 0x5e, 0x00); - if (priv->card_8192_version == (u8)VERSION_819xU_A) - { - //Antenna gain offset from B/C/D to A - dwRegValue = (priv->AntennaTxPwDiff[1]<<4 | priv->AntennaTxPwDiff[0]); - rtl8192_setBBreg(dev, rFPGA0_TxGainStage, (bXBTxAGC|bXCTxAGC), dwRegValue); - - //XSTALLCap - dwRegValue = priv->CrystalCap & 0xf; - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, bXtalCap, dwRegValue); - } - - // Check if the CCK HighPower is turned ON. - // This is used to calculate PWDB. - priv->bCckHighPower = (u8)(rtl8192_QueryBBReg(dev, rFPGA0_XA_HSSIParameter2, 0x200)); - return; -} -/****************************************************************************** - *function: This function initialize BB&RF - * input: net_device dev - * output: none - * return: none - * notice: Initialization value may change all the time, so please make - * sure it has been synced with the newest. - * ***************************************************************************/ -void rtl8192_BBConfig(struct net_device* dev) -{ - rtl8192_InitBBRFRegDef(dev); - //config BB&RF. As hardCode based initialization has not been well - //implemented, so use file first.FIXME:should implement it for hardcode? - rtl8192_BB_Config_ParaFile(dev); - return; -} - -/****************************************************************************** - *function: This function obtains the initialization value of Tx power Level offset - * input: net_device dev - * output: none - * return: none - * ***************************************************************************/ -void rtl8192_phy_getTxPower(struct net_device* dev) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - priv->MCSTxPowerLevelOriginalOffset[0] = - read_nic_dword(dev, rTxAGC_Rate18_06); - priv->MCSTxPowerLevelOriginalOffset[1] = - read_nic_dword(dev, rTxAGC_Rate54_24); - priv->MCSTxPowerLevelOriginalOffset[2] = - read_nic_dword(dev, rTxAGC_Mcs03_Mcs00); - priv->MCSTxPowerLevelOriginalOffset[3] = - read_nic_dword(dev, rTxAGC_Mcs07_Mcs04); - priv->MCSTxPowerLevelOriginalOffset[4] = - read_nic_dword(dev, rTxAGC_Mcs11_Mcs08); - priv->MCSTxPowerLevelOriginalOffset[5] = - read_nic_dword(dev, rTxAGC_Mcs15_Mcs12); - - // read rx initial gain - priv->DefaultInitialGain[0] = read_nic_byte(dev, rOFDM0_XAAGCCore1); - priv->DefaultInitialGain[1] = read_nic_byte(dev, rOFDM0_XBAGCCore1); - priv->DefaultInitialGain[2] = read_nic_byte(dev, rOFDM0_XCAGCCore1); - priv->DefaultInitialGain[3] = read_nic_byte(dev, rOFDM0_XDAGCCore1); - RT_TRACE(COMP_INIT, "Default initial gain (c50=0x%x, c58=0x%x, c60=0x%x, c68=0x%x) \n", - priv->DefaultInitialGain[0], priv->DefaultInitialGain[1], - priv->DefaultInitialGain[2], priv->DefaultInitialGain[3]); - - // read framesync - priv->framesync = read_nic_byte(dev, rOFDM0_RxDetector3); - priv->framesyncC34 = read_nic_byte(dev, rOFDM0_RxDetector2); - RT_TRACE(COMP_INIT, "Default framesync (0x%x) = 0x%x \n", - rOFDM0_RxDetector3, priv->framesync); - - // read SIFS (save the value read fome MACPHY_REG.txt) - priv->SifsTime = read_nic_word(dev, SIFS); - - return; -} - -/****************************************************************************** - *function: This function obtains the initialization value of Tx power Level offset - * input: net_device dev - * output: none - * return: none - * ***************************************************************************/ -void rtl8192_phy_setTxPower(struct net_device* dev, u8 channel) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - u8 powerlevel = priv->TxPowerLevelCCK[channel-1]; - u8 powerlevelOFDM24G = priv->TxPowerLevelOFDM24G[channel-1]; - - switch(priv->rf_chip) - { - case RF_8256: - PHY_SetRF8256CCKTxPower(dev, powerlevel); //need further implement - PHY_SetRF8256OFDMTxPower(dev, powerlevelOFDM24G); - break; - default: -// case RF_8225: -// case RF_8258: - RT_TRACE((COMP_PHY|COMP_ERR), "error RF chipID(8225 or 8258) in function %s()\n", __FUNCTION__); - break; - } - return; -} - -/****************************************************************************** - *function: This function check Rf chip to do RF config - * input: net_device dev - * output: none - * return: only 8256 is supported - * ***************************************************************************/ -void rtl8192_phy_RFConfig(struct net_device* dev) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - - switch(priv->rf_chip) - { - case RF_8256: - PHY_RF8256_Config(dev); - break; - // case RF_8225: - // case RF_8258: - default: - RT_TRACE(COMP_ERR, "error chip id\n"); - break; - } - return; -} - -/****************************************************************************** - *function: This function update Initial gain - * input: net_device dev - * output: none - * return: As Windows has not implemented this, wait for complement - * ***************************************************************************/ -void rtl8192_phy_updateInitGain(struct net_device* dev) -{ - return; -} - -/****************************************************************************** - *function: This function read RF parameters from general head file, and do RF 3-wire - * input: net_device dev - * output: none - * return: return code show if RF configuration is successful(0:pass, 1:fail) - * Note: Delay may be required for RF configuration - * ***************************************************************************/ -u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device* dev, RF90_RADIO_PATH_E eRFPath) -{ - - int i; - //u32* pRFArray; - u8 ret = 0; - - switch(eRFPath){ - case RF90_PATH_A: - for(i = 0;i<RadioA_ArrayLength; i=i+2){ - - if(rtl819XRadioA_Array[i] == 0xfe){ - mdelay(100); - continue; - } - rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioA_Array[i], bMask12Bits, rtl819XRadioA_Array[i+1]); - mdelay(1); - - } - break; - case RF90_PATH_B: - for(i = 0;i<RadioB_ArrayLength; i=i+2){ - - if(rtl819XRadioB_Array[i] == 0xfe){ - mdelay(100); - continue; - } - rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioB_Array[i], bMask12Bits, rtl819XRadioB_Array[i+1]); - mdelay(1); - - } - break; - case RF90_PATH_C: - for(i = 0;i<RadioC_ArrayLength; i=i+2){ - - if(rtl819XRadioC_Array[i] == 0xfe){ - mdelay(100); - continue; - } - rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioC_Array[i], bMask12Bits, rtl819XRadioC_Array[i+1]); - mdelay(1); - - } - break; - case RF90_PATH_D: - for(i = 0;i<RadioD_ArrayLength; i=i+2){ - - if(rtl819XRadioD_Array[i] == 0xfe){ - mdelay(100); - continue; - } - rtl8192_phy_SetRFReg(dev, eRFPath, rtl819XRadioD_Array[i], bMask12Bits, rtl819XRadioD_Array[i+1]); - mdelay(1); - - } - break; - default: - break; - } - - return ret;; - -} -/****************************************************************************** - *function: This function set Tx Power of the channel - * input: struct net_device *dev - * u8 channel - * output: none - * return: none - * Note: - * ***************************************************************************/ -void rtl8192_SetTxPowerLevel(struct net_device *dev, u8 channel) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - u8 powerlevel = priv->TxPowerLevelCCK[channel-1]; - u8 powerlevelOFDM24G = priv->TxPowerLevelOFDM24G[channel-1]; - - switch(priv->rf_chip) - { - case RF_8225: -#ifdef TO_DO_LIST - PHY_SetRF8225CckTxPower(Adapter, powerlevel); - PHY_SetRF8225OfdmTxPower(Adapter, powerlevelOFDM24G); -#endif - break; - - case RF_8256: - PHY_SetRF8256CCKTxPower(dev, powerlevel); - PHY_SetRF8256OFDMTxPower(dev, powerlevelOFDM24G); - break; - - case RF_8258: - break; - default: - RT_TRACE(COMP_ERR, "unknown rf chip ID in rtl8192_SetTxPowerLevel()\n"); - break; - } - return; -} - -/****************************************************************************** - *function: This function set RF state on or off - * input: struct net_device *dev - * RT_RF_POWER_STATE eRFPowerState //Power State to set - * output: none - * return: none - * Note: - * ***************************************************************************/ -bool rtl8192_SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerState) -{ - bool bResult = true; -// u8 eRFPath; - struct r8192_priv *priv = ieee80211_priv(dev); - - if(eRFPowerState == priv->ieee80211->eRFPowerState) - return false; - - if(priv->SetRFPowerStateInProgress == true) - return false; - - priv->SetRFPowerStateInProgress = true; - - switch(priv->rf_chip) - { - case RF_8256: - switch( eRFPowerState ) - { - case eRfOn: -#if 0 - rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x1); // 0x860[4] - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x3); // 0x88c[4] - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x3); // 0x880[6:5] - rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xf, 0x3); // 0xc04[3:0] - rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x3); // 0xd04[3:0] - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0x7000, 0x3); // 0x884[14:12] - // for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++) - // PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x2); - - //SwChnl(Adapter->ChannelID); -#endif - //RF-A, RF-B - //enable RF-Chip A/B - rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x1); // 0x860[4] - //analog to digital on - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x3);// 0x88c[9:8] - //digital to analog on - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18, 0x3); // 0x880[4:3] - //rx antenna on - rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x3, 0x3);// 0xc04[1:0] - //rx antenna on - rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x3, 0x3);// 0xd04[1:0] - //analog to digital part2 on - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x3); // 0x880[6:5] - - break; - - case eRfSleep: - - break; - - case eRfOff: -#if 0 - rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x0); // 0x860[4] - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x0); // 0x88c[4] - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x0); // 0x880[6:5] - rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xf, 0); // 0xc04[3:0] - rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0); // 0xd04[3:0] - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0x7000, 0x0); // 0x884[14:12] - // for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++) - // PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0); -#endif - //RF-A, RF-B - //disable RF-Chip A/B - rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x0); // 0x860[4] - //analog to digital off, for power save - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8] - //digital to analog off, for power save - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18, 0x0); // 0x880[4:3] - //rx antenna off - rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xf, 0x0);// 0xc04[3:0] - //rx antenna off - rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x0);// 0xd04[3:0] - //analog to digital part2 off, for power save - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x0); // 0x880[6:5] - - break; - - default: - bResult = false; - RT_TRACE(COMP_ERR, "SetRFPowerState819xUsb(): unknow state to set: 0x%X!!!\n", eRFPowerState); - break; - } - break; - default: - RT_TRACE(COMP_ERR, "Not support rf_chip(%x)\n", priv->rf_chip); - break; - } -#ifdef TO_DO_LIST - if(bResult) - { - // Update current RF state variable. - pHalData->eRFPowerState = eRFPowerState; - switch(pHalData->RFChipID ) - { - case RF_8256: - switch(pHalData->eRFPowerState) - { - case eRfOff: - // - //If Rf off reason is from IPS, Led should blink with no link, by Maddest 071015 - // - if(pMgntInfo->RfOffReason==RF_CHANGE_BY_IPS ) - { - Adapter->HalFunc.LedControlHandler(Adapter,LED_CTL_NO_LINK); - } - else - { - // Turn off LED if RF is not ON. - Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_POWER_OFF); - } - break; - - case eRfOn: - // Turn on RF we are still linked, which might happen when - // we quickly turn off and on HW RF. 2006.05.12, by rcnjko. - if( pMgntInfo->bMediaConnect == TRUE ) - { - Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_LINK); - } - else - { - // Turn off LED if RF is not ON. - Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_NO_LINK); - } - break; - - default: - // do nothing. - break; - }// Switch RF state - break; - - default: - RT_TRACE(COMP_RF, DBG_LOUD, ("SetRFPowerState8190(): Unknown RF type\n")); - break; - } - - } -#endif - priv->SetRFPowerStateInProgress = false; - - return bResult; -} - -/**************************************************************************************** - *function: This function set command table variable(struct SwChnlCmd). - * input: SwChnlCmd* CmdTable //table to be set. - * u32 CmdTableIdx //variable index in table to be set - * u32 CmdTableSz //table size. - * SwChnlCmdID CmdID //command ID to set. - * u32 Para1 - * u32 Para2 - * u32 msDelay - * output: - * return: true if finished, false otherwise - * Note: - * ************************************************************************************/ -u8 rtl8192_phy_SetSwChnlCmdArray( - SwChnlCmd* CmdTable, - u32 CmdTableIdx, - u32 CmdTableSz, - SwChnlCmdID CmdID, - u32 Para1, - u32 Para2, - u32 msDelay - ) -{ - SwChnlCmd* pCmd; - - if(CmdTable == NULL) - { - RT_TRACE(COMP_ERR, "phy_SetSwChnlCmdArray(): CmdTable cannot be NULL.\n"); - return false; - } - if(CmdTableIdx >= CmdTableSz) - { - RT_TRACE(COMP_ERR, "phy_SetSwChnlCmdArray(): Access invalid index, please check size of the table, CmdTableIdx:%d, CmdTableSz:%d\n", - CmdTableIdx, CmdTableSz); - return false; - } - - pCmd = CmdTable + CmdTableIdx; - pCmd->CmdID = CmdID; - pCmd->Para1 = Para1; - pCmd->Para2 = Para2; - pCmd->msDelay = msDelay; - - return true; -} -/****************************************************************************** - *function: This function set channel step by step - * input: struct net_device *dev - * u8 channel - * u8* stage //3 stages - * u8* step // - * u32* delay //whether need to delay - * output: store new stage, step and delay for next step(combine with function above) - * return: true if finished, false otherwise - * Note: Wait for simpler function to replace it //wb - * ***************************************************************************/ -u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8* stage, u8* step, u32* delay) -{ - struct r8192_priv *priv = ieee80211_priv(dev); -// PCHANNEL_ACCESS_SETTING pChnlAccessSetting; - SwChnlCmd PreCommonCmd[MAX_PRECMD_CNT]; - u32 PreCommonCmdCnt; - SwChnlCmd PostCommonCmd[MAX_POSTCMD_CNT]; - u32 PostCommonCmdCnt; - SwChnlCmd RfDependCmd[MAX_RFDEPENDCMD_CNT]; - u32 RfDependCmdCnt; - SwChnlCmd *CurrentCmd = NULL; - //RF90_RADIO_PATH_E eRFPath; - u8 eRFPath; -// u32 RfRetVal; -// u8 RetryCnt; - - RT_TRACE(COMP_CH, "====>%s()====stage:%d, step:%d, channel:%d\n", __FUNCTION__, *stage, *step, channel); -// RT_ASSERT(IsLegalChannel(Adapter, channel), ("illegal channel: %d\n", channel)); -#ifdef ENABLE_DOT11D - if (!IsLegalChannel(priv->ieee80211, channel)) - { - RT_TRACE(COMP_ERR, "=============>set to illegal channel:%d\n", channel); - return true; //return true to tell upper caller function this channel setting is finished! Or it will in while loop. - } -#endif -//FIXME:need to check whether channel is legal or not here.WB - - - //for(eRFPath = RF90_PATH_A; eRFPath <pHalData->NumTotalRFPath; eRFPath++) -// for(eRFPath = 0; eRFPath <RF90_PATH_MAX; eRFPath++) -// { -// if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath)) -// continue; - // <1> Fill up pre common command. - PreCommonCmdCnt = 0; - rtl8192_phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, MAX_PRECMD_CNT, - CmdID_SetTxPowerLevel, 0, 0, 0); - rtl8192_phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++, MAX_PRECMD_CNT, - CmdID_End, 0, 0, 0); - - // <2> Fill up post common command. - PostCommonCmdCnt = 0; - - rtl8192_phy_SetSwChnlCmdArray(PostCommonCmd, PostCommonCmdCnt++, MAX_POSTCMD_CNT, - CmdID_End, 0, 0, 0); - - // <3> Fill up RF dependent command. - RfDependCmdCnt = 0; - switch( priv->rf_chip ) - { - case RF_8225: - if (!(channel >= 1 && channel <= 14)) - { - RT_TRACE(COMP_ERR, "illegal channel for Zebra 8225: %d\n", channel); - return true; - } - rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, - CmdID_RF_WriteReg, rZebra1_Channel, RF_CHANNEL_TABLE_ZEBRA[channel], 10); - rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, - CmdID_End, 0, 0, 0); - break; - - case RF_8256: - // TEST!! This is not the table for 8256!! - if (!(channel >= 1 && channel <= 14)) - { - RT_TRACE(COMP_ERR, "illegal channel for Zebra 8256: %d\n", channel); - return true; - } - rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, - CmdID_RF_WriteReg, rZebra1_Channel, channel, 10); - rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++, MAX_RFDEPENDCMD_CNT, - CmdID_End, 0, 0, 0); - break; - - case RF_8258: - break; - - default: - RT_TRACE(COMP_ERR, "Unknown RFChipID: %d\n", priv->rf_chip); - return true; - break; - } - - - do{ - switch(*stage) - { - case 0: - CurrentCmd=&PreCommonCmd[*step]; - break; - case 1: - CurrentCmd=&RfDependCmd[*step]; - break; - case 2: - CurrentCmd=&PostCommonCmd[*step]; - break; - } - - if(CurrentCmd->CmdID==CmdID_End) - { - if((*stage)==2) - { - (*delay)=CurrentCmd->msDelay; - return true; - } - else - { - (*stage)++; - (*step)=0; - continue; - } - } - - switch(CurrentCmd->CmdID) - { - case CmdID_SetTxPowerLevel: - if(priv->card_8192_version == (u8)VERSION_819xU_A) //xiong: consider it later! - rtl8192_SetTxPowerLevel(dev,channel); - break; - case CmdID_WritePortUlong: - write_nic_dword(dev, CurrentCmd->Para1, CurrentCmd->Para2); - break; - case CmdID_WritePortUshort: - write_nic_word(dev, CurrentCmd->Para1, (u16)CurrentCmd->Para2); - break; - case CmdID_WritePortUchar: - write_nic_byte(dev, CurrentCmd->Para1, (u8)CurrentCmd->Para2); - break; - case CmdID_RF_WriteReg: - for(eRFPath = 0; eRFPath < RF90_PATH_MAX; eRFPath++) - { - rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, bZebra1_ChannelNum, CurrentCmd->Para2); - } - break; - default: - break; - } - - break; - }while(true); -// }/*for(Number of RF paths)*/ - - (*delay)=CurrentCmd->msDelay; - (*step)++; - return false; -} - -/****************************************************************************** - *function: This function does acturally set channel work - * input: struct net_device *dev - * u8 channel - * output: none - * return: noin - * Note: We should not call this function directly - * ***************************************************************************/ -void rtl8192_phy_FinishSwChnlNow(struct net_device *dev, u8 channel) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - u32 delay = 0; - - while(!rtl8192_phy_SwChnlStepByStep(dev,channel,&priv->SwChnlStage,&priv->SwChnlStep,&delay)) - { - // if(delay>0) - // msleep(delay);//or mdelay? need further consideration - if(!priv->up) - break; - } -} -/****************************************************************************** - *function: Callback routine of the work item for switch channel. - * input: - * - * output: none - * return: noin - * ***************************************************************************/ -void rtl8192_SwChnl_WorkItem(struct net_device *dev) -{ - - struct r8192_priv *priv = ieee80211_priv(dev); - - RT_TRACE(COMP_CH, "==> SwChnlCallback819xUsbWorkItem(), chan:%d\n", priv->chan); - - - rtl8192_phy_FinishSwChnlNow(dev , priv->chan); - - RT_TRACE(COMP_CH, "<== SwChnlCallback819xUsbWorkItem()\n"); -} - -/****************************************************************************** - *function: This function scheduled actural workitem to set channel - * input: net_device dev - * u8 channel //channel to set - * output: none - * return: return code show if workitem is scheduled(1:pass, 0:fail) - * Note: Delay may be required for RF configuration - * ***************************************************************************/ -u8 rtl8192_phy_SwChnl(struct net_device* dev, u8 channel) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - RT_TRACE(COMP_CH, "=====>%s(), SwChnlInProgress:%d\n", __FUNCTION__, priv->SwChnlInProgress); - if(!priv->up) - return false; - if(priv->SwChnlInProgress) - return false; - -// if(pHalData->SetBWModeInProgress) -// return; -if (0) //to test current channel from RF reg 0x7. -{ - u8 eRFPath; - for(eRFPath = 0; eRFPath < 2; eRFPath++){ - printk("====>set channel:%x\n",rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x7, bZebra1_ChannelNum)); - udelay(10); - } -} - //-------------------------------------------- - switch(priv->ieee80211->mode) - { - case WIRELESS_MODE_A: - case WIRELESS_MODE_N_5G: - if (channel<=14){ - RT_TRACE(COMP_ERR, "WIRELESS_MODE_A but channel<=14"); - return false; - } - break; - case WIRELESS_MODE_B: - if (channel>14){ - RT_TRACE(COMP_ERR, "WIRELESS_MODE_B but channel>14"); - return false; - } - break; - case WIRELESS_MODE_G: - case WIRELESS_MODE_N_24G: - if (channel>14){ - RT_TRACE(COMP_ERR, "WIRELESS_MODE_G but channel>14"); - return false; - } - break; - } - //-------------------------------------------- - - priv->SwChnlInProgress = true; - if(channel == 0) - channel = 1; - - priv->chan=channel; - - priv->SwChnlStage=0; - priv->SwChnlStep=0; -// schedule_work(&(priv->SwChnlWorkItem)); -// rtl8192_SwChnl_WorkItem(dev); - if(priv->up) { -// queue_work(priv->priv_wq,&(priv->SwChnlWorkItem)); - rtl8192_SwChnl_WorkItem(dev); - } - - priv->SwChnlInProgress = false; - return true; -} - - -// -/****************************************************************************** - *function: Callback routine of the work item for set bandwidth mode. - * input: struct net_device *dev - * HT_CHANNEL_WIDTH Bandwidth //20M or 40M - * HT_EXTCHNL_OFFSET Offset //Upper, Lower, or Don't care - * output: none - * return: none - * Note: I doubt whether SetBWModeInProgress flag is necessary as we can - * test whether current work in the queue or not.//do I? - * ***************************************************************************/ -void rtl8192_SetBWModeWorkItem(struct net_device *dev) -{ - - struct r8192_priv *priv = ieee80211_priv(dev); - u8 regBwOpMode; - - RT_TRACE(COMP_SWBW, "==>rtl8192_SetBWModeWorkItem() Switch to %s bandwidth\n", \ - priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20?"20MHz":"40MHz") - - - if(priv->rf_chip == RF_PSEUDO_11N) - { - priv->SetBWModeInProgress= false; - return; - } - - //<1>Set MAC register - regBwOpMode = read_nic_byte(dev, BW_OPMODE); - - switch(priv->CurrentChannelBW) - { - case HT_CHANNEL_WIDTH_20: - regBwOpMode |= BW_OPMODE_20MHZ; - // 2007/02/07 Mark by Emily becasue we have not verify whether this register works - write_nic_byte(dev, BW_OPMODE, regBwOpMode); - break; - - case HT_CHANNEL_WIDTH_20_40: - regBwOpMode &= ~BW_OPMODE_20MHZ; - // 2007/02/07 Mark by Emily becasue we have not verify whether this register works - write_nic_byte(dev, BW_OPMODE, regBwOpMode); - break; - - default: - RT_TRACE(COMP_ERR, "SetChannelBandwidth819xUsb(): unknown Bandwidth: %#X\n",priv->CurrentChannelBW); - break; - } - - //<2>Set PHY related register - switch(priv->CurrentChannelBW) - { - case HT_CHANNEL_WIDTH_20: - // Add by Vivi 20071119 - rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x0); - rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x0); - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 1); - - // Correct the tx power for CCK rate in 20M. Suggest by YN, 20071207 -#if 0 - write_nic_dword(dev, rCCK0_TxFilter1, 0x1a1b0000); - write_nic_dword(dev, rCCK0_TxFilter2, 0x090e1317); - write_nic_dword(dev, rCCK0_DebugPort, 0x00000204); -#endif - priv->cck_present_attentuation = - priv->cck_present_attentuation_20Mdefault + priv->cck_present_attentuation_difference; - - if(priv->cck_present_attentuation > 22) - priv->cck_present_attentuation= 22; - if(priv->cck_present_attentuation< 0) - priv->cck_present_attentuation = 0; - RT_TRACE(COMP_INIT, "20M, pHalData->CCKPresentAttentuation = %d\n", priv->cck_present_attentuation); - - if(priv->chan == 14 && !priv->bcck_in_ch14) - { - priv->bcck_in_ch14 = TRUE; - dm_cck_txpower_adjust(dev,priv->bcck_in_ch14); - } - else if(priv->chan != 14 && priv->bcck_in_ch14) - { - priv->bcck_in_ch14 = FALSE; - dm_cck_txpower_adjust(dev,priv->bcck_in_ch14); - } - else - dm_cck_txpower_adjust(dev,priv->bcck_in_ch14); - - break; - case HT_CHANNEL_WIDTH_20_40: - // Add by Vivi 20071119 - rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x1); - rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x1); - rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1)); - rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 0); - rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC); -#if 0 - // Correct the tx power for CCK rate in 40M. Suggest by YN, 20071207 - write_nic_dword(dev, rCCK0_TxFilter1, 0x35360000); - write_nic_dword(dev, rCCK0_TxFilter2, 0x121c252e); - write_nic_dword(dev, rCCK0_DebugPort, 0x00000409); -#endif - priv->cck_present_attentuation = - priv->cck_present_attentuation_40Mdefault + priv->cck_present_attentuation_difference; - - if(priv->cck_present_attentuation > 22) - priv->cck_present_attentuation = 22; - if(priv->cck_present_attentuation < 0) - priv->cck_present_attentuation = 0; - - RT_TRACE(COMP_INIT, "40M, pHalData->CCKPresentAttentuation = %d\n", priv->cck_present_attentuation); - if(priv->chan == 14 && !priv->bcck_in_ch14) - { - priv->bcck_in_ch14 = true; - dm_cck_txpower_adjust(dev,priv->bcck_in_ch14); - } - else if(priv->chan!= 14 && priv->bcck_in_ch14) - { - priv->bcck_in_ch14 = false; - dm_cck_txpower_adjust(dev,priv->bcck_in_ch14); - } - else - dm_cck_txpower_adjust(dev,priv->bcck_in_ch14); - - break; - default: - RT_TRACE(COMP_ERR, "SetChannelBandwidth819xUsb(): unknown Bandwidth: %#X\n" ,priv->CurrentChannelBW); - break; - - } - //Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315 - -#if 1 - //<3>Set RF related register - switch( priv->rf_chip ) - { - case RF_8225: -#ifdef TO_DO_LIST - PHY_SetRF8225Bandwidth(Adapter, pHalData->CurrentChannelBW); -#endif - break; - - case RF_8256: - PHY_SetRF8256Bandwidth(dev, priv->CurrentChannelBW); - break; - - case RF_8258: - // PHY_SetRF8258Bandwidth(); - break; - - case RF_PSEUDO_11N: - // Do Nothing - break; - - default: - RT_TRACE(COMP_ERR, "Unknown RFChipID: %d\n", priv->rf_chip); - break; - } -#endif - priv->SetBWModeInProgress= false; - - RT_TRACE(COMP_SWBW, "<==SetBWMode819xUsb(), %d", atomic_read(&(priv->ieee80211->atm_swbw)) ); -} - -/****************************************************************************** - *function: This function schedules bandwith switch work. - * input: struct net_device *dev - * HT_CHANNEL_WIDTH Bandwidth //20M or 40M - * HT_EXTCHNL_OFFSET Offset //Upper, Lower, or Don't care - * output: none - * return: none - * Note: I doubt whether SetBWModeInProgress flag is necessary as we can - * test whether current work in the queue or not.//do I? - * ***************************************************************************/ -void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - - if(priv->SetBWModeInProgress) - return; - priv->SetBWModeInProgress= true; - - priv->CurrentChannelBW = Bandwidth; - - if(Offset==HT_EXTCHNL_OFFSET_LOWER) - priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_UPPER; - else if(Offset==HT_EXTCHNL_OFFSET_UPPER) - priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_LOWER; - else - priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_DONT_CARE; - - //queue_work(priv->priv_wq, &(priv->SetBWModeWorkItem)); - // schedule_work(&(priv->SetBWModeWorkItem)); - rtl8192_SetBWModeWorkItem(dev); - -} - -void InitialGain819xUsb(struct net_device *dev, u8 Operation) -{ - struct r8192_priv *priv = ieee80211_priv(dev); - - priv->InitialGainOperateType = Operation; - - if(priv->up) - { - #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) - queue_delayed_work(priv->priv_wq,&priv->initialgain_operate_wq,0); - #else - #if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - schedule_task(&priv->initialgain_operate_wq); - #else - queue_work(priv->priv_wq,&priv->initialgain_operate_wq); - #endif - #endif - } -} - -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)) -extern void InitialGainOperateWorkItemCallBack(struct work_struct *work) -{ - struct delayed_work *dwork = container_of(work,struct delayed_work,work); - struct r8192_priv *priv = container_of(dwork,struct r8192_priv,initialgain_operate_wq); - struct net_device *dev = priv->ieee80211->dev; -#else -extern void InitialGainOperateWorkItemCallBack(struct net_device *dev) -{ - struct r8192_priv *priv = ieee80211_priv(dev); -#endif -#define SCAN_RX_INITIAL_GAIN 0x17 -#define POWER_DETECTION_TH 0x08 - u32 BitMask; - u8 initial_gain; - u8 Operation; - - Operation = priv->InitialGainOperateType; - - switch(Operation) - { - case IG_Backup: - RT_TRACE(COMP_SCAN, "IG_Backup, backup the initial gain.\n"); - initial_gain = SCAN_RX_INITIAL_GAIN;//priv->DefaultInitialGain[0];// - BitMask = bMaskByte0; - if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM) - rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // FW DIG OFF - priv->initgain_backup.xaagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XAAGCCore1, BitMask); - priv->initgain_backup.xbagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XBAGCCore1, BitMask); - priv->initgain_backup.xcagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XCAGCCore1, BitMask); - priv->initgain_backup.xdagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XDAGCCore1, BitMask); - BitMask = bMaskByte2; - priv->initgain_backup.cca = (u8)rtl8192_QueryBBReg(dev, rCCK0_CCA, BitMask); - - RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc50 is %x\n",priv->initgain_backup.xaagccore1); - RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc58 is %x\n",priv->initgain_backup.xbagccore1); - RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc60 is %x\n",priv->initgain_backup.xcagccore1); - RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xc68 is %x\n",priv->initgain_backup.xdagccore1); - RT_TRACE(COMP_SCAN, "Scan InitialGainBackup 0xa0a is %x\n",priv->initgain_backup.cca); - - RT_TRACE(COMP_SCAN, "Write scan initial gain = 0x%x \n", initial_gain); - write_nic_byte(dev, rOFDM0_XAAGCCore1, initial_gain); - write_nic_byte(dev, rOFDM0_XBAGCCore1, initial_gain); - write_nic_byte(dev, rOFDM0_XCAGCCore1, initial_gain); - write_nic_byte(dev, rOFDM0_XDAGCCore1, initial_gain); - RT_TRACE(COMP_SCAN, "Write scan 0xa0a = 0x%x \n", POWER_DETECTION_TH); - write_nic_byte(dev, 0xa0a, POWER_DETECTION_TH); - break; - case IG_Restore: - RT_TRACE(COMP_SCAN, "IG_Restore, restore the initial gain.\n"); - BitMask = 0x7f; //Bit0~ Bit6 - if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM) - rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // FW DIG OFF - - rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, BitMask, (u32)priv->initgain_backup.xaagccore1); - rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, BitMask, (u32)priv->initgain_backup.xbagccore1); - rtl8192_setBBreg(dev, rOFDM0_XCAGCCore1, BitMask, (u32)priv->initgain_backup.xcagccore1); - rtl8192_setBBreg(dev, rOFDM0_XDAGCCore1, BitMask, (u32)priv->initgain_backup.xdagccore1); - BitMask = bMaskByte2; - rtl8192_setBBreg(dev, rCCK0_CCA, BitMask, (u32)priv->initgain_backup.cca); - - RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc50 is %x\n",priv->initgain_backup.xaagccore1); - RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc58 is %x\n",priv->initgain_backup.xbagccore1); - RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc60 is %x\n",priv->initgain_backup.xcagccore1); - RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xc68 is %x\n",priv->initgain_backup.xdagccore1); - RT_TRACE(COMP_SCAN, "Scan BBInitialGainRestore 0xa0a is %x\n",priv->initgain_backup.cca); - -#ifdef RTL8190P - SetTxPowerLevel8190(Adapter,priv->CurrentChannel); -#endif -#ifdef RTL8192E - SetTxPowerLevel8190(Adapter,priv->CurrentChannel); -#endif -//#ifdef RTL8192U - rtl8192_phy_setTxPower(dev,priv->ieee80211->current_network.channel); -//#endif - - if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM) - rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); // FW DIG ON - break; - default: - RT_TRACE(COMP_SCAN, "Unknown IG Operation. \n"); - break; - } -} - |