diff options
author | Justin P. Mattock <justinmattock@gmail.com> | 2012-04-30 14:41:36 (GMT) |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2012-04-30 14:48:48 (GMT) |
commit | 589b3d06fd159774f9f5c3639d8d5d938670c019 (patch) | |
tree | 349f00bea451ba77085ab365af20f6609801bec8 /drivers/staging/rtl8192u/r8192U_core.c | |
parent | f316983fe033ba090b2f82fb9912aae9412d2372 (diff) | |
download | linux-fsl-qoriq-589b3d06fd159774f9f5c3639d8d5d938670c019.tar.xz |
staging: rtl8192u Fix typos.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/staging/rtl8192u/r8192U_core.c')
-rw-r--r-- | drivers/staging/rtl8192u/r8192U_core.c | 56 |
1 files changed, 28 insertions, 28 deletions
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c index 9c00865..be86045 100644 --- a/drivers/staging/rtl8192u/r8192U_core.c +++ b/drivers/staging/rtl8192u/r8192U_core.c @@ -203,7 +203,7 @@ static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv* priv) { Dot11d_Init(ieee); ieee->bGlobalDomain = false; - //acturally 8225 & 8256 rf chip only support B,G,24N mode + //actually 8225 & 8256 rf chip only support B,G,24N mode if ((priv->rf_chip == RF_8225) || (priv->rf_chip == RF_8256)) { min_chan = 1; @@ -1103,7 +1103,7 @@ inline u16 rtl8192_rate2rate(short rate) } -/* The protype of rx_isr has changed since one verion of Linux Kernel */ +/* The prototype of rx_isr has changed since one version of Linux Kernel */ static void rtl8192_rx_isr(struct urb *urb) { struct sk_buff *skb = (struct sk_buff *) urb->context; @@ -1476,7 +1476,7 @@ static void rtl8192_tx_isr(struct urb *tx_urb) if(tcb_desc->queue_index != TXCMD_QUEUE) { if(tx_urb->status == 0) { dev->trans_start = jiffies; - // As act as station mode, destion shall be unicast address. + // As act as station mode, destination shall be unicast address. //priv->ieee80211->stats.tx_bytes+=(skb->len - priv->ieee80211->tx_headroom); //priv->ieee80211->stats.tx_packets++; priv->stats.txoktotal++; @@ -1522,13 +1522,13 @@ static void rtl8192_tx_isr(struct urb *tx_urb) else if ((skb_queue_len(&priv->ieee80211->skb_drv_aggQ[queue_index])!= 0)&&\ (!(priv->ieee80211->queue_stop))) { // Tx Driver Aggregation process - /* The driver will aggregation the packets according to the following stets + /* The driver will aggregation the packets according to the following stats * 1. check whether there's tx irq available, for it's a completion return * function, it should contain enough tx irq; - * 2. check pakcet type; + * 2. check packet type; * 3. initialize sendlist, check whether the to-be send packet no greater than 1 - * 4. aggregation the packets, and fill firmware info and tx desc to it, etc. - * 5. check whehter the packet could be sent, otherwise just insert to wait head + * 4. aggregates the packets, and fill firmware info and tx desc to it, etc. + * 5. check whether the packet could be sent, otherwise just insert to wait head * */ skb = skb_dequeue(&priv->ieee80211->skb_drv_aggQ[queue_index]); if(!check_nic_enough_desc(dev, queue_index)) { @@ -2447,7 +2447,7 @@ static int rtl8192_qos_handle_probe_response(struct r8192_priv *priv, return 0; } -/* handle manage frame frame beacon and probe response */ +/* handle and manage frame from beacon and probe response */ static int rtl8192_handle_beacon(struct net_device * dev, struct ieee80211_beacon * beacon, struct ieee80211_network * network) @@ -2625,7 +2625,7 @@ bool GetHalfNmodeSupportByAPs819xUsb(struct net_device* dev) void rtl8192_refresh_supportrate(struct r8192_priv* priv) { struct ieee80211_device* ieee = priv->ieee80211; - //we donot consider set support rate for ABG mode, only HT MCS rate is set here. + //we do not consider set support rate for ABG mode, only HT MCS rate is set here. if (ieee->mode == WIRELESS_MODE_N_24G || ieee->mode == WIRELESS_MODE_N_5G) { memcpy(ieee->Regdot11HTOperationalRateSet, ieee->RegHTSuppRateSet, 16); @@ -2780,10 +2780,10 @@ static void rtl8192_init_priv_variable(struct net_device* dev) priv->TransmitConfig = // TCR_DurProcMode | //for RTL8185B, duration setting by HW //? TCR_DISReqQsize | - (TCR_MXDMA_2048<<TCR_MXDMA_OFFSET)| // Max DMA Burst Size per Tx DMA Burst, 7: reservied. + (TCR_MXDMA_2048<<TCR_MXDMA_OFFSET)| // Max DMA Burst Size per Tx DMA Burst, 7: reserved. (priv->ShortRetryLimit<<TCR_SRL_OFFSET)| // Short retry limit (priv->LongRetryLimit<<TCR_LRL_OFFSET) | // Long retry limit - (false ? TCR_SAT: 0); // FALSE: HW provies PLCP length and LENGEXT, TURE: SW proiveds them + (false ? TCR_SAT: 0); // FALSE: HW provides PLCP length and LENGEXT, TURE: SW provides them #ifdef TO_DO_LIST if(Adapter->bInHctTest) pHalData->ReceiveConfig = pHalData->CSMethod | @@ -3437,7 +3437,7 @@ if(Adapter->ResetProgress == RESET_TYPE_NORESET) { // User disable RF via registry. RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n")); MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW); - // Those action will be discard in MgntActSet_RF_State because off the same state + // Those action will be discard in MgntActSet_RF_State because of the same state for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++) PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0); } @@ -3458,7 +3458,7 @@ if(Adapter->ResetProgress == RESET_TYPE_NORESET) if(pHalData->eRFPowerState == eRfOff) { MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason); - // Those action will be discard in MgntActSet_RF_State because off the same state + // Those action will be discard in MgntActSet_RF_State because of the same state for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++) PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0); } @@ -3586,7 +3586,7 @@ TxCheckStuck(struct net_device *dev) //unsigned long flags; // - // Decide Stuch threshold according to current power save mode + // Decide such threshold according to current power save mode // // RT_TRACE(COMP_RESET, " ==> TxCheckStuck()\n"); @@ -3745,7 +3745,7 @@ rtl819x_ifcheck_resetornot(struct net_device *dev) // Driver should not check RX stuck in IBSS mode because it is required to // set Check BSSID in order to send beacon, however, if check BSSID is - // set, STA cannot hear any packet a all. Emily, 2008.04.12 + // set, STA cannot hear any packet at all. Emily, 2008.04.12 RxResetType = RxCheckStuck(dev); } if(TxResetType==RESET_TYPE_NORMAL || RxResetType==RESET_TYPE_NORMAL) @@ -3962,7 +3962,7 @@ RESET_START: up(&priv->wx_sem); RT_TRACE(COMP_RESET,"%s():<==========down process is finished\n",__FUNCTION__); //rtl8192_irq_disable(dev); - RT_TRACE(COMP_RESET,"%s():===========>start to up the driver\n",__FUNCTION__); + RT_TRACE(COMP_RESET,"%s():===========>start up the driver\n",__FUNCTION__); reset_status = _rtl8192_up(dev); RT_TRACE(COMP_RESET,"%s():<===========up process is finished\n",__FUNCTION__); @@ -4155,7 +4155,7 @@ extern void rtl819x_watchdog_wqcallback(struct work_struct *work) void watch_dog_timer_callback(unsigned long data) { struct r8192_priv *priv = ieee80211_priv((struct net_device *) data); - //printk("===============>watch_dog timer\n"); + //printk("===============>watch_dog timer\n"); queue_delayed_work(priv->priv_wq,&priv->watch_dog_wq, 0); mod_timer(&priv->watch_dog_timer, jiffies + MSECS(IEEE80211_WATCH_DOG_TIME)); } @@ -4170,7 +4170,7 @@ int _rtl8192_up(struct net_device *dev) init_status = rtl8192_adapter_start(dev); if(!init_status) { - RT_TRACE(COMP_ERR,"ERR!!! %s(): initialization is failed!\n", __FUNCTION__); + RT_TRACE(COMP_ERR,"ERR!!! %s(): initialization failed!\n", __FUNCTION__); priv->up=priv->ieee80211->ieee_up = 0; return -EAGAIN; } @@ -4256,7 +4256,7 @@ int rtl8192_down(struct net_device *dev) skb_queue_purge(&priv->ieee80211->skb_drv_aggQ [i]); } - //as cancel_delayed_work will del work->timer, so if work is not definedas struct delayed_work, it will corrupt + //as cancel_delayed_work will del work->timer, so if work is not defined as struct delayed_work, it will corrupt // flush_scheduled_work(); rtl8192_cancel_deferred_work(priv); deinit_hal_dm(dev); @@ -4516,7 +4516,7 @@ u8 HwRateToMRate90(bool bIsHT, u8 rate) /** * Function: UpdateRxPktTimeStamp - * Overview: Recored down the TSF time stamp when receiving a packet + * Overview: Record down the TSF time stamp when receiving a packet * * Input: * PADAPTER Adapter @@ -4556,9 +4556,9 @@ long rtl819x_translate_todbm(u8 signal_strength_index )// 0-100 index. } -/* 2008/01/22 MH We can not delcare RSSI/EVM total value of sliding window to +/* 2008/01/22 MH We can not declare RSSI/EVM total value of sliding window to be a local static. Otherwise, it may increase when we return from S3/S4. The - value will be kept in memory or disk. We must delcare the value in adapter + value will be kept in memory or disk. We must declare the value in adapter and it will be reinitialized when return from S3/S4. */ void rtl8192_process_phyinfo(struct r8192_priv * priv,u8* buffer, struct ieee80211_rx_stats * pprevious_stats, struct ieee80211_rx_stats * pcurrent_stats) { @@ -5091,7 +5091,7 @@ static void rtl8192_query_rxphystatus( tmp_rxevm = pofdm_buf->rxevm_X[i]; rx_evmX = (char)(tmp_rxevm); - // Do not use shift operation like "rx_evmX >>= 1" because the compilor of free build environment + // Do not use shift operation like "rx_evmX >>= 1" because the compiler of free build environment // fill most significant bit to "zero" when doing shifting operation which may change a negative // value to positive one, then the dbm value (which is supposed to be negative) is not correct anymore. rx_evmX /= 2; //dbm @@ -5171,7 +5171,7 @@ void TranslateRxSignalStuff819xUsb(struct sk_buff *skb, type = WLAN_FC_GET_TYPE(fc); praddr = hdr->addr1; - /* Check if the received packet is acceptabe. */ + /* Check if the received packet is acceptable. */ bpacket_match_bssid = ((IEEE80211_FTYPE_CTL != type) && (eqMacAddr(priv->ieee80211->current_network.bssid, (fc & IEEE80211_FCTL_TODS)? hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS )? hdr->addr2 : hdr->addr3)) && (!pstats->bHwError) && (!pstats->bCRC)&& (!pstats->bICV)); @@ -5211,7 +5211,7 @@ void TranslateRxSignalStuff819xUsb(struct sk_buff *skb, /** * Function: UpdateReceivedRateHistogramStatistics -* Overview: Recored down the received data rate +* Overview: Record down the received data rate * * Input: * struct net_device *dev @@ -5401,7 +5401,7 @@ void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats, } #ifdef USB_RX_AGGREGATION_SUPPORT - /* for the rx aggregated sub frame, the redundant space truelly contained in the packet */ + /* for the rx aggregated sub frame, the redundant space truly contained in the packet */ if(bIsRxAggrSubframe) { skb_pull(skb, 8); } @@ -5480,7 +5480,7 @@ void rtl8192_rx_nomal(struct sk_buff* skb) PacketShiftBytes = GetRxPacketShiftBytes819xUsb(&stats, false); } #endif - /* Process the MPDU recevied */ + /* Process the MPDU received */ skb_trim(skb, skb->len - 4/*sCrcLng*/); rx_pkt_len = skb->len; @@ -5538,7 +5538,7 @@ void rtl8192_rx_nomal(struct sk_buff* skb) if(PacketLength > agg_skb->len) { break; } - /* Process the MPDU recevied */ + /* Process the MPDU received */ skb = dev_alloc_skb(PacketLength); memcpy(skb_put(skb,PacketLength),agg_skb->data, PacketLength); skb_trim(skb, skb->len - 4/*sCrcLng*/); |